Go to www.tilmor.com/resources for complete parts list, additional resources and replacement
part ordering.
Attention
Review safety information before operation.
Plastic Lifter 49.0053
Tools3/4” wrench3/4” socketRatchet wrenchTorque wrench
REQUIRED PARTS
D
There is additional hardware in the box. The additional hardware is used for the installation of the plastic lifters onto a tool bar. The installation instructions
are found in the Plastic Lifter Operations Manual.
8x99.E01031/2” Locking Flange Nut
8x97.0810-51/2” Carriage Bolts
1xAA-1074Debris RemovalPlate
1xAA-6032Disc Guard Right
2xAA-3013Disc, Plastic Cutter
1xAA-1064End Cap
1xPlastic LifterAssembly, Right
1xAA-6031Disc Guard Left
1xPlastic LifterAssembly, Left
Release Date: 09/25/2018Document Number: 12.50001Revision Number: 01
E
F
8x99.E01031/2” Locking Flange Nut
8x97.0810-51/2” Carriage Bolts
1xAA-1074Debris RemovalPlate
1xAA-1064End Cap
Assembly Time (estimated) 1 hour
(50 ft-lbs / 68 Nm)
RIGHT PLASTIC LIFTER (AB-9003)(AB-9005)3/4” wrench, 3/4” socket, Torque Wrench
1
4x99.E01031/2” Locking Flange Nut
4x97.08101/2” Carriage Bolts
1xAA-1064End Cap
1xAB-9003Plastic LifterRight
(50 ft-lbs / 68 Nm)
3/4” wrench, 3/4” socket, Torque Wrench
2x99.E01031/2” Locking Flange Nut
2x97.08101/2” Carriage Bolts
1xAA-6032Disc Guard Right
(50 ft-lbs / 68 Nm)
23/4” wrench, 3/4” socket, Torque Wrench
2x99.E01031/2” Locking Flange Nut
2x97.08101/2” Carriage Bolts
1xAA-1074Debris RemovalPlate
3
1xAA-3013Disc, Plastic Cutter
(50 ft-lbs / 68 Nm)
(50 ft-lbs / 68 Nm)
(50 ft-lbs / 68 Nm)
LEFT PLASTIC LIFTER (AB-9004)(AB-9005)3/4” wrench, 3/4” socket, Torque Wrench
1
4x99.E01031/2” Locking Flange Nut
4x97.08101/2” Carriage Bolts
1xAA-1064End Cap
1xAB-9004Plastic LifterLeft
3/4” wrench, 3/4” socket, Torque Wrench
2x99.E01031/2” Locking Flange Nut
2x97.08101/2” Carriage Bolts
1xAA-6031Disc Guard Left
23/4” wrench, 3/4” socket, Torque Wrench
2x99.E01031/2” Locking Flange Nut
2x97.08101/2” Carriage Bolts
1xAA-1074Debris RemovalPlate
3
1xAA-3013Disc, Plastic Cutter