Plastic Packaging - Europages€¦ · Decapac offers a total solution for your packaging needs with...

Plastic Packaging

catalogue 9/2012 v.4

www.deca.be

2

As your packaging partner, Deca prides itself on its quality, consistency and customer satisfaction. We care as much about the end result as the customers themselves. We are always striving for improvement and are looking to launch new products. Our dedication is the driving force behind our product. Therefore, with over 30 years of experience, Deca has a unique place in the packaging industry. Decapac offers a total solution for your packaging needs with an extensive range of high quality plastic packaging, which are suitable for packing a large diversity of products. Are you looking for exclusive packaging? We will design it for and with you. A personalised product can be obtained by screen printing, offset printing or in mould labelling. Besides an excellent proposition of price and quality, Decapac also offers you a personal service and unprecedentedflexibility. We are convinced that we can offer a solution for your product.

Because quality products deserve quality packaging.

3

TP containers with safety closure 5-9

Containers and trays with lid 10-13

Sealable containers and trays 14-20

IML - Your shape, your design 21

Precut lids and Sealing film for preformed trays 22

Material and Barrier Properties 23

Contents

member of the

4

Complete Packaging Solutions !

Because quality productsdeserve quality packaging !

Own production

Hundreds of formats

User friendly

Completely recyclable

High quality offset printing

IML decoration with photographic quality

5

The DECA-TP line offers an extensive choice of containers with safety closure in different sizes, shapes and colours:

Coloured or highly transparent High quality offset printing

IML decoration in high gloss or matt With photographic quality

6

100 % LIQUID TIGHT

HIGHSHELF IMPACT

DISHWASHERFRIENDLY

MICROWAVEABLE CRYSTALCLEAR ORCOLOURED

APPROVEDFOR FOODPRODUCTS

SPECIAL RESINS FOR LOW

TEMPERATURE

TPR RECTANGULAR CONTAINERS

TPR O U N D C O NTA I N E R S

Sweets and chocolate products - confectionery - biscuits - salads - spreads - nuts - olives and Mediterranean products - snacks - ice cream - pet food - toys - industrial products -

body care - hobby and office supplies

More effective space utilisation, more per pallet,

reduced transport cost,

more than saving !

7

TPR O U N D C O NTA I N E R S

With tamper evident closurearticle cont. ml. dimensions mm. material

DECA-TP48-30 30 Ø 48 x 31 PPDECA-TP48-50 50 Ø 48 x 50 PPDECA-TP48-D - leakproof lid PP

DECA-TP69-120 120 Ø 69 x 52 PPDECA-TP69-155 155 Ø 69 x 68 PPDECA-TP69-D - leakproof lid PP DECA-TP69-VD - vented lid PP

article cont. ml. dimensions mm. material

DECA-TP87-310 310 Ø 87 x 75 PPDECA-TP87-385 385 Ø 87 x 94 PP

DECA-TP87-D - leakproof lid PP


DECA-TP95-180 180 Ø 95 x 43 PPDECA-TP95-210 210 Ø 95 x 52 PPDECA-TP95-225 225 Ø 95 x 51 PPDECA-TP95-280 280 Ø 95 x 65 PPDECA-TP95-315 315 Ø 95 x 73 PPDECA-TP95-365 365 Ø 95 x 84 PP DECA-TP95-375 375 Ø 95 x 83 PPDECA-TP95-520 520 Ø 95 x 117 PP

DECA-TP95-D - leakproof lid PPDECA-TP95-OD - overlid injected PP


DECA-TP133-1180* 1180 Ø 133 x 130 PP

DECA-TP133-D - leakproof lid PP


DECA-TP118-295 295 Ø 118 x 49 PPDECA-TP118-300 300 Ø 118 x 50 PPDECA-TP118-480* 480 Ø 118 x 75 PPDECA-TP118-565* 565 Ø 118 x 87 PP DECA-TP118-600 600 Ø 118 x 88 PPDECA-TP118-870* 870 Ø 118 x 128 PPDECA-TP118-1000 1025 Ø 118 x 143 PP

DECA-TP118-D - leakproof lid PPDECA-TP118-VD - vented lid PP

* Handle available

* Handle available

8


DECA-TPS128-500 550 128 x 128 x 55 PPDECA-TPS128-600 680 128 x 128 x 65 PPDECA-TPS128-750 790 128 x 128 x 74 PPDECA-TPS128-900 960 128 x 128 x 89 PPDECA-TPS128-1100 1280 128 x 128 x 118 PP

DECA-TPS128-D - leakproof lid PP


DECA-TPS079-125 125 79 x 79 x 34 PPDECA-TPS079-150 150 79 x 79 x 41 PPDECA-TPS079-225 225 79 x 79 x 57 PPDECA-TPS079-280 280 79 x 79 x 69 PPDECA-TPS079-365 365 79 x 79 x 92 PPDECA-TPS079-425 420 79 x 79 x 110 PP

DECA-TPS079-SD - flip top lid PPDECA-TPS079-D - leakproof lid PPDECA-TPS079-DO - dome lid, straight PPDECA-TPS079-DS - dome lid, sapphire PPDECA-TPS079-ID - leakproof lid PP

article cont. ml. dimensions mm. material DECA-TPS192-1300 1300 192 x 192 x 51 PP DECA-TPS192-2000 2000 192 x 192 x 77 PPDECA-TPS192-2140 2140 192 x 192 x 75 PPDECA-TPS192-2500 2500 192 x 192 x 94 PPDECA-TPS192-3000 3000 192 x 192 x 112 PPDECA-TPS192-4000 4000 192 x 192 x 150 PPDECA-TPS192-5000 5000 192 x 192 x 191 PP

DECA-TPS192-D - leakproof lid PP

With tamper evident closure

9

TPR RECTANGULAR CONTAINERS


DECA-TPR1208-200 200 120 x 88 x 32 PPDECA-TPR1208-270 270 120 x 88 x 42 PPDECA-TPR1208-425 425 120 x 88 x 69 PP

DECA-TPR1208-D - leakproof lid PP


DECA-TPRSI-111-200* 200 114 x 84 x 38 PP

DECA-TPRSI-111-D* - leakproof lid PPUNDER CONSTRUCTION


DECA-TPRK1811-1180 1180 178 x 108 x 88 PP

DECA-TPRK1811-D - leakproof lid PP

article cont. ml. dimensions mm. material DECA-TPR1912-750 750 192 x 126 x 47 PPDECA-TPR1912-1000 1000 192 x 126 x 67 PPDECA-TPR1912-1200 1200 192 x 126 x 73 PPDECA-TPR1912-1600 1600 192 x 126 x 92 PP

DECA-TPR1912-D - leakproof lid PP

With tamper evident closure

* under construction

10

Containers and trays with lid

Decapac offers you an extensive programme of containers and trays with a good lid fit.

• Available from stock• Suitable for multiple purposes• Perfectly destackable for automatic processing• 100 % recyclable

11


DECA-0007-43 135 Ø 75 x 43 PPDECA-0007-D - lid injected PPDECA-0007-FOLIE - precut lid PP

DECA-0010-34 190 Ø 100 x 34 PPDECA-0010-D - lid injected PP


DECA-SQ090-150 165 94 x 94 x 28 PPDECA-SQ090-172 172 94 x 94 x 38 PPDECA-SQ090-200 205 94 x 94 x 35 PPDECA-SQ090-250 255 94 x 94 x 44 PPDECA-SQ090-300 310 94 x 94 x 54 PPDECA-SQ090-400 415 94 x 94 x 75 PPDECA-SQ090-500 525 94 x 94 x 100 PP DECA-SQ090-OD - overlid injected PPDECA-SQ090-ODP - pasteurization overlid PPDECA-SQ090-folie - precut lid PP/ALU


DECA-RO.095-150 155 Ø 95 x 38 PPDECA-RO.095-200 205 Ø 95 x 41 PPDECA-RO.095-250 255 Ø 95 x 52 PPDECA-RO.095-300 303 Ø 95 x 63 PPDECA-RO.095-400 410 Ø 95 x88 PPDECA-RO.095-500 520 Ø 95 x119 PP

DECA-0095-OD - overlid thermoformed PSDECA-0095-OD-A - overlid injected rounded PP DECA-0095-OD-AP - pasteurization overlid PPDECA-0095-OD-R - overlid injected PPDECA-0095-OD-S - overlid injected display rim PPDECA-0095-ID - lid thermoformed PP/PETGDECA-0095FOLIE - precut lid PP


DECA-RO.052-25 25 Ø 52 X 27 PPDECA-RO.052-50 50 Ø 52 X 46 PP

DECA-RO.052-D - lid thermoformed PETGDECA-RO.052FOLIE - precut lid PP


DECA-SDB9090-350 350 90 x 90 x 68 PP


12


DECA-111-RSI-200* 200 114 x 84 x 40 PPDECA-111-RSI-250 250 114 x 84 x 48 PPDECA-111-RSI-375* 375 114 x 84 x 70 PPDECA-111-RSI-60/120* 60/120 114 x 84 x 48-2v PP

DECA-111-RSI-ID - lid thermoformed PPDECA-111-RSI-D - overlid injected PPDECA-111FOLIE - precut lid 111 x 84DECA-114FOLIE - precut lid PP 114 x 86


DECA-1010-51 250 104 x 104 x 51 PP

DECA-1010-D - overlid injected PP



DECA-6K-0095-47 220 Ø 95 x 47 hexagon PPDECA-6K-0095-59 268 Ø 95 x 59 hexagon PPDECA-6K-0095-76 326 Ø 95 x 76 hexagon PP




DECA-MB385 368 Ø 89 x 93 PPDECA-MB385-D - lid injected PPDECA-MB700 669 Ø 104 x 120 PPDECA-MB700-D - lid injected PP DECA-MB1350 1238 Ø 130 x 142 PPDECA-MB1350-D - lid injected PPDECA-MB2250 2127 Ø 156 x 165 PPDECA-MB2250-D - lid injected PP


DECA-SP115-350 350 Ø 115 x 50 PPDECA-SP115-500 500 Ø 115 x 68 PPDECA-SP115-1000 1000 Ø 115 x 138 PP

DECA-SP115-D - lid injected HDPE

13


DECA-1913-100 1200 186 x 132 x 100 PPDECA-1913-OD - overlid injected PPDECA-1913FOLIE - precut lid PP 192 x 137

DECA-1914-188 3000 196 x 141 x 188 PPDECA-1914-D - lid injected PP


DECA-1712-80 1100 170 x 125 x 80 PP

DECA-1712-ID - lid injected PP


DECA-2114-73 1560 215 x 147 x 73 PPDECA-2114-83 1860 215 x 147 x 83 PPDECA-2114-OD - overlid injected PP


Containers and trays with lidarticle cont. ml. dimensions mm. material

DECA-RO.115-250 260 Ø 115 x 35 PPDECA-RO.115-300 309 Ø 115 x 42 PPDECA-RO.115-400 411 Ø 115 x 57 PPDECA-RO.115-600 611 Ø 115 x 88 PP

DECA-RO.115-OD - overlid thermoformed PSDECA-RO.115-D - overlid injected PPDECA-RO.115-ID - lid thermoformed PP


DECA-0020-33 750 Ø 200 x 33 PP

DECA-0020-D - lid injected PP


DECA-0016-58 850 Ø 162 x 58 PPDECA-0016-87 1000 Ø 162 x 87 PP


14

Large programme of rigid sealable containers and trays.

• Suitable for vacuum and gas flush (MAP) options• Overlaying lids available for a large number of dimensions• Perfectly destackable for automatic processing• Easy to recycle

Contact us for pasteurisation and sterilisation applications.

Sealable containers and trays

15


DECA-0007-43 135 Ø 75 x 43 PP

DECA-0007-D - lid injected PPDECA-0007-FOLIE - precut lid PP


DECA-SQ090-150 165 94 x 94 x 28 PPDECA-SQ090-172 172 94 x 94 x 38 PPDECA-SQ090-200 205 94 x 94 x 35 PPDECA-SQ090-250 255 94 x 94 x 44 PPDECA-SQ090-300 310 94 x 94 x 54 PPDECA-SQ090-400 415 94 x 94 x 75 PPDECA-SQ090-500 525 94 x 94 x 100 PP DECA-SQ090-OD - overlid injected PPDECA-SQ090-ODP - pasteurization overlid PPDECA-SQ090-folie - precut lid PP/ALU


DECA-RO.095-150 155 Ø 95 x 38 PPDECA-RO.095-200 205 Ø 95 x 41 PPDECA-RO.095-250 255 Ø 95 x 52 PPDECA-RO.095-300 303 Ø 95 x 63 PPDECA-RO.095-400 410 Ø 95 x88 PPDECA-RO.095-500 520 Ø 95 x119 PP



DECA-RO.052-25 25 Ø 52 X 27 PPDECA-RO.052-50 50 Ø 52 X 46 PP

DECA-RO.052-D - lid thermoformed PETGDECA-RO.052FOLIE - precut lid PP


DECA-SQ094-550 550 94 x 94 x 107 PP


16


DECA-111-RSI-200* 200 114 x 84 x 40 PPDECA-111-RSI-250 250 114 x 84 x 48 PPDECA-111-RSI-375* 375 114 x 84 x 70 PPDECA-111-RSI-60/120* 60/120 114 x 84 x 48-2v PP

DECA-111-RSI-ID - lid thermoformed PPDECA-111-RSI-D - overlid injected PPDECA-111FOLIE - precut lid 111 x 84DECA-114FOLIE - precut lid PP 114 x 86


DECA-0010-34 190 Ø 100 x 34 PP



DECA-0012-65 300 Ø 125 x 65 PP


DECA-1010-51 250 104 x 104 x 51 PP

DECA-1010-D - overlid injected PP




DECA-6K-0095-47 220 Ø 95 x 47 hexagon PPDECA-6K-0095-59 268 Ø 95 x 59 hexagon PPDECA-6K-0095-76 326 Ø 95 x 76 hexagon PP


17


DECA-1610-25 320 165 x 105 x 25 PPDECA-1610-52 625 165 x 105 x 55 PPDECA-1610-60 730 165 x 105 x 60 PP

DECA-1610-OD - overlid injected PP


DECA-1510-50 475 147 x 108 x 50 PPDECA-1510-60 575 147 x 108 x 60 PP

DECA-1510-OD - overlid thermoformed APET


DECA-1410-25 250 145 x 107 x 25 PPDECA-1410-30 300 145 x 107 x 30 PPDECA-1410-35 350 145 x 107 x 35 PP DECA-1410-43 425 145 x 107 x 43 PP

DECA-1410-D - overlid thermoformed PETG



DECA-1309-OD - overlid injected PPDECA-1309-ODT - overlid thermoformed APET



DECA-RO.115-250 260 Ø 115 x 35 PPDECA-RO.115-300 309 Ø 115 x 42 PPDECA-RO.115-400 411 Ø 115 x 57 PPDECA-RO.115-600 611 Ø 115 x 88 PP

DECA-RO.115-OD - overlid thermoformed PSDECA-RO.115-D - overlid injected PPDECA-RO.115-ID - lid thermoformed PP

18









DECA-1813-78 1320 180 x 130 x 78 PP

DECA-1813-OD - overlid thermoformed PPDECA-1813-VD - presentation lid PC



Sealable containers and traysarticle cont. ml. dimensions mm. material

DECA-1612-25 375 164 x 123 x 25 PPDECA-1612-37 500 164 x 123 x 37 PPDECA-1612-46 625 164 x 123 x 46 PPDECA-1612-52 750 164 x 123 x 52 PPDECA-1612-80 1000 164 x 123 x 80 PP


19







DECA-2210-35 490 220 x 100 x 35 PPDECA-2210-35 220/220 220 x 100 x 35 - 2v PPDECA-2210-50 700 220 x 100 x 50 PPDECA-2210-65 850 220 x 100 x 65 - 2v PP


DECA-2014-25 525 208 x 146 x 25 PPDECA-2014-35 750 208 x 146 x 35 PPDECA-2014-40 850 208 x 146 x 40 PPDECA-2014-48 1000 208 x 146 x 48 PPDECA-2014-54 1125 208 x 146 x 54 PPDECA-2014-74 1590 208 x 146 x 74 PP


DECA-1913-100 1200 186 x 132 x 100 PP DECA-1913-D - overlid injected PPDECA-1913FOLIE - precut lid PP 192 x 137


Sealable containers and traysarticle cont. ml. dimensions mm. material

DECA-2010-37 470 200 x 103 x 38 PP

20


DECA-3124-22 1200 309 x 240 x 22 PPDECA-3124-43 2400 309 x 240 x 43 PPDECA-3124-50 2800 309 x 240 x 50 PPDECA-3124-60 3300 309 x 240 x 60 PPDECA-3124-71 4000 309 x 240 x 71 PPDECA-3124-88 5000 309 x 240 x 88 PP




DECA2616-D - overlid thermo. APET


DECA-2714-73 2200 274 x 148 x 73 PP






21

Your shape Your design

Please contact us !We will gladly design a suitable

packaging for and with you.

22

Precut lidsPlastic - aluminium - paper - laminate

• Precut for all kind of shapes• Different embossed profiles according to the product • Made for high speed production• New shapes can be developed quickly and at low cost• Certificates for food, pharma, cosmetics, etc. • Printing is possible

Sealing film for preformed trays

Many sizes and types available from stock

• Plastic film on reel• Any width or length available on request• Sealing or peel-off • Anti-fog• Permits metal detection• Printing is possible

23

APET CPET CPP HPP/RCP PS PLA

Minimum Temperature - 40°C - 40° C - 40°C + 2°C - 40°C 0°C

Maximum Temperature + 70°C + 220°C + 121°C + 121°C + 85°C + 40°C

Permeability Co-Efficients APET CPET CPP HPP/RCP PS PLA

O2 (Oxygen) cm³ x 25 µm m² x 24h x bar 100 - 160 66 - 78 2500 - 4500 1550 6000 500

CO2 cm³ x 25 µm (Carbon dioxide) m² x 24h x bar

200 - 500 230 - 260 9500 -14400 8800 18000 2500

H2O (Water) g x 25 µm m² x 24h

10 - 30 14 7 - 12 6 60 - 150 300

N2 (Nitrogen) cm³ x 25 µm m² x 24h x bar

5 - 20 9 - 16 700 - 880 640 2000

Material Properties

Barrier Properties

member of the

Toekomstlaan 14 I B-2200 Herentals I T: +32 (0)14 28 65 00 I F: +32 (0)14 28 65 01 I [email protected] I www.deca.be

Paris

Düsseldorf

Amsterdam

Date post:	01-Oct-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Plastic Packaging - Europages€¦ · Decapac offers a total solution for your packaging needs with...

Documents