®
great service, great qualityLockinex
StepoversWarranted & Certi�ed
To BS EN ISO 14122-3:2016(Safety of machinery-Peramant means of access to machinery. Stairs,Step Ladders & Guardrails)
Galvanised to BS EN 1461:2009
Plated Warranty I.D. Tag
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Page ?
INTRODUCTIONLockinex Step Overs are manufactured and distributed in “Kit” form.(Installation service is also available-Call for details)Kits comprise of all the necessary components toconstruct a walkway, safely, quickly and economically.
Individual components are available in Mild SteelGalvanised.
Application
Where an access route is required for themaintanenece of plant and equipment.
Page 2 of 4
Design
Warranted & Certified
To BS EN ISO 14122-3:2016(Safety of machinery-Permanent means of access tomachinery. Stairs, Step Ladders & Guardrails)
Galvanised to BS EN 1461:2009
Perforated Gratings used for Stair Treads& Platform. These provide the lowestrisk of slip in the Ceram Slip Test.They register as “Extremely Low” risk.
Simple to use components, available directly from stock.
Rubber Feet for Roof Topinstallations and areaswhere there is need for repositioningat any time.
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
System Components Overview
Page 3 of 4
Stairway sidesupports(Stringers)
Lockinexbrandedstructuralconnection bolts.Torque to 225 N/m
Stairway side supports withStair Treads inserted, forming the stairway.
The side brackets for the handrails& support frame are generallysupplied loose.
Structural lattice usedto support tall step overstructures.
Handrail and toeboard to preventfalling of personnel and/or looseobjects.
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Maintenance/Design/Manufacture
Manufactured from mild steel, with a hot dipped galvanised �nish to BS EN1461:2009.
Once installed this product requires very little maintenance.
Once the Structural �xings have been connected, at initial install, they should not require any further attention. Depending on the local environment it may be prudent to have these checked at an agreed interval to ensure there has been no tampering or removal.
Design
When standard kit components are fully assembled, as per our product literature,compliance with BS EN ISO 14122-3:2016 will be achieved.
Should the contractor/third party installer adapt/alter the step over in any way , considerationshould be given to the proposed alterations.
Guidance can be found within BS EN ISO 14122-2:2016
ManufactureWarranted & Certi�ed by Lockinex UK Ltd
To BS EN ISO 14122-3:2016(Safety of machinery-Peramant means of access to machinery. Stairs,Step Ladders & Guardrails)
Maintenance
Lockinex UK Ltd reserves the right to alter, re-design, remove options or remove products from sale at any time without notice.
Page 4 of 4