Contents
-1-
Precautions .....................................
Safety Information.........................
Disc Notes ....................................
Installation ....................................
Electric Connection ......................
Remote Control ...........................
Control Panel ................................
Basic Operations
Radio Operations ..........................
DISC Operations ...........................
DISC Special Functions ................
Detaching the control panel ..............
Changing the control panel ...............
Touch Panel
Unit Keys ......................................
TFT Monitor
........................
Audio Quality Adjustments
..................
Alternate Audio/Video Source ..........
Listening to the radio ......................
Storing stations in memory ..............
Listening to a preset station ............
RDS Function ................................
Basic Operations ............................
Select Playback Mode .....................
AUX Operation ...............................
On-Screen Disc Operations .............
Selecting audio languages ..............
....................................
Adjustment ................
Rear View Camera
...............
Setting Audio Mode .........................
Reset Factory Settings
..........................
27
27
27
28
30
30
31
32
34
35
35
28
33
33
36
37
7
8
13
13
14
17
17
17
18
18
18
1
1
2
22
24
25
26
27
2
3
4
5
9
10
16
19
27
9
9
20
20
2
Selecting Subtitles ..........................
Selecting multi-angle views ..............
Title menu function ..........................
General Setup ................................
Speaker Setup ...............................
Dolby Digital Setup ........................
Preferences Setup ..........................
Defaults Table ................................
USB Operations ..............................
SD/MMC Card Operations ...............
MP3/WMA/JPEG Play .....................
MPEG4 Play ...................................
Setup .............................................
Other Main Operations ...................
Specifications ...............................
Trouble Shooting ..........................
-2-
Precautions
THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .
Before operating the unit, read this manual thoroughly and keep it handy
for future reference .
To avoid injury or accident , read the following precautions before
installing and operating the unit .
ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL
Do not press on the LCD panel on the unit as doing so can distort the
picture or cause a malfunction . The picture may become unclear , or the
LCD panel may be damaged .
DO NOT install any receiver in locations where;- it may obstruct the steering wheel and gearshift lever operations, as thismay result in a traffic accident.
- it may obstruct the operation of safety devices such as air bags, as thismay result in a fatal accident.
- it may obstruct visibility.DO NOT operate any receiver while manipulating the steering wheel, as
this may result in a traffic accident.The driver must not watch the monitor while driving.IF THE DRIVER watches the monitor while driving, it may lead to
carelessness and cause an accident.IF YOU NEED to operate the receive while driving, be sure to look ahead
carefully or you may be involved in a traffic accident.IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the
monitor, and no playback picture will be shown.- This warning appears only when the parking brake wire is connected tothe parking brake system built in the car ( refer to the electric connection)
ON INSTALLATION
NOTES ON CLEANING
-Clean the LCD panel with a slightly damp soft cloth.
-Do not use solvents such as benzine, thinner, commercially available
cleaners or antistatic spray .
-Do not use alcohol to clean the screen .
If your car was parked in a cold or hot place, the picture may not be clear .
The monitor is not damaged . The picture will become clear the temper-
ature in your car becomes normal .
-3-
Safety Information
REGION MANAGEMENT INFORMATION:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this
DVD Player, this DVD Player cannot play this disc.
CAUTION:
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DVD PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
COPYRIGHT PROTECTION
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
-4-
Disc Notes
Preparing New Discs with
Spots
Rough
A new disc may have rough edges on
its inside and outside edges. If a disc
with rough edges is used, the proper
setting wil l not be performed and the
player will not play the disc. Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right. To remove the
rough edges, press the s ide of the pen
or pencil against the inside and outside
edges of the disc.
Rough spotsonoutside edge
Ball point penor pencil
Rough spotson insideedge
Do not touchtheundersideof the disc
Do notbend
Wipe the disc fromcentertoward the outsideedge
Label sideup
Disc CleaningUse a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Handling and CleaningDirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Discs which cannot be played
with this playerDVD-RAM
CDV
CDG
Note:A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Disc formats supported by this
player
DVD
VCD
CD
MP3
Audio and Video
Disc size 12 cm
Audio and Video
Disc size 12 cm
Audio
Disc size 12 cm
Audio
Disc size 12 cm
Installation
-5-
30
1. Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
2. Before finally installing the unit, connect the wiring temporarily and make sure
all connected up properly and the unit and the system work properly.
3. Use only the parts included with the unit to ensure proper installation. The use
unauthorized parts can cause malfunctions.
4. Consult with your nearest dealer if installation requires the drilling of holes or
modifications of the vehicle.
5. Install the unit where it does not get in the driver s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
. If installation angle exceeds 30 from horizontal, the unit might not give its
performance.
NOTES:
it is
of
other
. Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, from the heater, or where it would be
subject to dust, dirt or excessive vibration.
7
optimum
'
6
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front"(conventional DIN
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded
screw holes at the sides of the unit chassis). For details, refer to the following
illustrated installation methods.
Revoving the unit
1. Press the button to release the front panel .REL
2. Remove the control panel .
Installation
-6-
Installation the unit
3. Remove the PLASTIC COVER of the both sides away
4. Insert the two KEY PLAT into the grooves at both sidesof the unit as shown in figure until they click .
PLASTIC COVER
KEY PLATE
5. Pulling the levers makes it possible to removethe unit from the dashboard .
DASH BOARD
METAL MOUNTINGSTRAP
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
CONSOLE
SLIDE BRACKETHOUSING
HEX BOLT
-7-
Installation
How To Remove And Install The Front Panel
When detaching or attaching the control panel, be careful not to damage theconnectors on the back of the control panel and on the panel holder.
2). Pull-off the front panel and keep the front panel into the case .
PROTECTIVE CASE
Detaching The Front PanelBefore detaching the control panel, be sure to turn off the power.1). Press the release button and the left hand side of front panel will release.“REL”
Attaching The Front Panel1). First insert the right hand side of the front panel into the hollow of the unit .(NOTE : the “bulge” point on the panel must be attached into the hollow of the unit .)2). Gently push the left hand side of the front panel until you feel a “ Click” .
Hollow Bulge
RELEASE BUTTON
PUSH
Panel Angle Adjustment
-8-
Caution:Do not insert your finger behind the control panel.
When you want to change the viewing angle of the operating unit to play,you can touch the section on touch screen (or press the buttonon the front panel) repeatedly to select the desired angle as follows:
ANGLE 1 - ANGLE 2 - ANGLE 3 - ANGEL 4 - ANGLE 1 .
CHANGING THE CONTROL PANEL ANGLE
ANGLE 1 ANGLE 2
ANGLE 3ANGLE 4
Electric Connection
WIRING CONNECTION
-9-
Note:the earth connection cable (parking brake B-) must be connected in order for DVDpictures to be played back to the monitor. If the cable has not been correctlyconnected, the message “PARKING BRAKE” appears on the monitor.
FRONT RCA WHITE L
FRONT RCA RED R
VIDEO OUT 1 YELLOW
FRONT RCA OUTPUTCABLE
GREY
GREY/BLACK
FRONT
Rch SPK.
VIOLET
VIOLET/BLACK
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
REAR
Lch SPK.
AUTOANTENNA
BLUE
FUSE
GROUND(B-)
MEMORYBACK-UP(B+)
IGNITIONSWITCH(B+)
RADIO ANTENNA JACK
RED
YELLOW
BLACK
MAIN UNIT
REAR
Rch SPK.
FRONT
Lch SPK.
CHOKEBOX
GREY SUBWOOFER
VIDEO OUT 2 YELLOW
COAXIAL OUT BROWN
WHITE (B+)12VREAR CAMERA SWITCH
BROWN
YELLOW
RCA CABLE
REAR CAMERA INPUT
(B-)PARKING BRAKE
RCH RED
LCH WHITE
REAR RCA OUTPUTCABLE
FUSE
ISO CONNECTOR
Remote Control
-10-
6
5
ButtonRef #
1
2
REPEAT
CLOCKPress it briefly to view the clock time , Press again to return tonormal display mode . Press longer to set the time .
MODE Press repeatedly to cycle through the various modes:RADIO > DISC > AUX IN.
3 STOPPress once to pause playback. Press PLAY/PAUSE to resumeplayback. Please note: if you press STOP twice, playback willstart at the beginning of the disc.
SETUP4 Press this button to open the SETUP menu.
MO/ST(AUDIO)
In Radio mode, press this button to change between Mono andStereo reception modes (when a station is weak, sometimesswitching to Mono will improve sound quality). In Disc Playbackmode, pressing this button opens the AUDIO setup menu formaking changes to the way the soundtrack is reproduced.
SUBTITLELOCAL/DISTANT
In DVD Disc Playback mode, pressing this button will allow you tochange the subtitle language on discs which have this as anoption. In Radio mode, press this button to change the radioreception sensitivity in stations are near or far.
7Pressing this button will open a menu presenting you with theplayback repeat options available for that kind of disc.
Function
15
17
19
13
14
7
2
6
22
11
18
3
16
520
1
21
26
9
12
10
48
25
23
24
MENU
DVD/RECEIVER CONTROLDVD/RECEIVER CONTROL
SETUP
ENTER
1 2 3
4 5 6
7 8 9
0
VOL
SEL
A/PS
MUTE STOP
MO/ST
MODE
CLK
PLAY/PAUSE
EQ
ANGLE
BAND
VOL
OSD
TITLE/PBC
LO/DX
GOTO +10
TOP INT
RDM
REPEAT
MODE
TA
AF
Remote Control
-11-
ButtonRef # Function
8
9
GOTOPress it button to begin playback at a moment in the program youdesignate. Use number buttons to enter the data that is needed.
/Press these buttons to skip ahead or back one track. (Note: InDVD mode, press continually the twice to skip back one)
10 SEL
Press this button repeatedly to cycle through the various audioand video adjustments you can make: Volume, Bass, Treble,Balance, Fader, Color, Brightness, Contrast and Tint.
11 VOL+/- Use these controls to adjust the volume level.
Press to navigate the various menus present in the product.12 / / /
Press this button briefly to display the root level directory of aDVD disc. Press and hold this button to turn on or off theSUBWOOFER output.
MenuSubWoofer
( )
13
14BAND(OSD)
In Radio mode, press this button repeatedly to switch betweenthe five radio bands: FM1 > FM2 > FM3 > AM1 > AM2.In Disc Playback modes, Press this button to see informationabout the disc currently in play.
(POWER)
15 Press this button to turn the unit ON , press and hold to turn theunit OFF.
PLAY/PAUSE
16In Disc Playback mode, press to pause playback. Press again tostart where playback stopped.
MUTE17Press this button to turn off the audio. Press again to restore thesound to its prior volume level.
TITLE/PBC(A/P)18
When playing a DVD, pressing this button will open the TITLEmenu which is recorded on the DVD. When playing a VCD disc,press this button to create a PBC (Playback Control) menu for thedisc to assist in making playback selections. In Radio mode,press and hold this button to start the Auto-Program mode, duringwhich the tuner will scan for all strong stations and assign themto the radio preset buttons.
Press this button to adjust the screen viewing angle (see page 8).19
ANGLE20
For DVD discs which have alternate viewing angles encoded,when you see the "angle mark" symbol advising you that theseangles are available, press this button to see them.
EQ21Press repeatedly to cycle through the different equalizer curvepresets you may wish to use for enhanced listening.
/22 In Disc Playback mode, press for fast forward/reverse playback.
23 ENTERThis button is used to confirm selections and settings withinmany of the menus in the OSD system.
Remote Control
-12-
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About 30 degree in each the direction of the front of the IR mark.
Preparing the Remote Control
1.First push to inside as the direction indicated by the arrow (See )And then
Remove the battery holder as the direction indicated by the arrow (See ).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See ).
3.Insert the battery holder. Push in the holder to the original position(See ).
1
2
3
4
Inserting the Battery
ButtonRef # Function
0-9 These buttons are used for numeric entry in many different menus.In addition, in Radio Mode (when RDS is engaged), 0 serves asthe TA button and 9 serves as the AF button.
24
This button is used with the other number buttons for use withtwo-digit number entries.
+1025
1-626 Six numbered preset buttons store and recall stations for each band.
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a foil . Before initial use please remove this foil so that the remote
control is ready for operation .
Control Panel
Touch Panel
Key Functions
-13-
Touch Screen Key :
MODE Operating mode selection
MUTE ON To switch of the sound
Loading and ejecting theDVD/CD
VOLUME- Decrease the volume level
Changing the viewing angleof the operating unit
SELSelect the menu of thePicture/Sound
VOLUME+ Increase the volume level
DSP Select EQ function
TATurning pre-switching fortraffic announcements ONand OFF . (Only for RDS)
AFSwitch ON and OFF andalternative frequency .(Only for RDS)
S-WOOFER Subwoofer Function
CLK
Touch briefly show/hideclock, touch longer to setthe clock .
LUD Loudness Function
VOLUME+VOLUME-
MODE MUTE ON
SEL
DSP
S-WOOFERLUDCLKAFTA RES
SEL
CH1-6
REL
MOD
VOL
IR
AUX IN
CAR DVD/VCD/CD/MP3 PLAYER WITH MPEG4
TOUCH SCREEN
-14-
Unit Keys :
Control Panel
1 AUX Input JACKFor information about connecting a AUX device, please see page 25 .
2 IR SENSOR
3 VOL+/ VOL- KNOBIn normal mode, this knob is used to increase or decrease the volume. It is alsoused as an UP/DOWN knob when audio or video settings are being adjustedwhen accessed using the SELECT button.
4 (POWER On/Off )/MODE BUTTONPress this button to switch the device on. WELCOME appears in the display.Press it again to switch the device off. SEE YOU appears in the display.In playback mode, you can use the button to select the input mode by pressingrepeatedly until the proper one is found :DISC > AUX IN > RADIO .
5 ANGLE (Screen position)Press this button repeatedly to cycle through the different positions.
12
98
7
5
4
10
11
6
1
2
3
RES
SEL
CH1-6
REL
MOD
VOL
IR
AUX IN
CAR DVD/VCD/CD/MP3 PLAYER WITH MPEG4
TOUCH SCREEN
Control Panel
-15-
9 (EJECT) BUTTONPress it button to eject the DISC or insert the DISC to start play .
11 SD/MMC CARD SLOT
8 SELECT BUTTONTo access the available adjustment settings for audio and video, press thisbutton repeatedly to cycle through and select them:
Tint Contrast Bright Color Fader
Buzzer Volume Bass Treble Balance
7 /CH 1-6 BUTTON(RADIO PRESET)
-Store in Memory
>
-Retrieve a preset station
A)Press this button to pause playback, press it again to resume playback.
B)you can store 30 stations in memory: 18 FM stations and 12 AM(MW)stations, each band stores up to six preset stations .
Select the frequency band> Press repeatedly the button to select the desired memory key .> Select the station> Keep the desired memory key pressed in until the station is heard again
after a brief interruption .
press the button repeatedly to retrieve a station which had beenstored in the memory in advance the chose number is shown on display .
In Disc Playback Mode
In Radio Mode
6 REL BUTTONPress this button to release the front panel for removal . Refer to see page 7.
10 USB OPERATIONFor information about connecting a USB device, please see page 33.
12 RESET BUTTONPress this button to return to factory settings .
-16-
Basic Operation
Press it to switch the device ON,press and hold about 2 secondsto switch the device OFF.
POWER On/Off
Ejecting The Disc
Use your finger to touch therange on touch screen ,
the control panel of the unitwill swing downwards . Then
you can insert the disc or eject the disc .(You can also press the button on thefront panel to eject the disc or insert thedisc to start play . )
DISC AUX IN RADIO
Select Sources
Touch the MODsection on the screen, thesignals will display in thescreen as follow :
repeatedlyMODE
Mute Function
Touch “MUTE ON” range,it will mute the soundbut the disc continuesplaying . Touch it againto resume .
MUTE ON
Setting The Buzzer ON/OFF
Repeatedly touch range
to select the item, andthe use the VOL+/- to switch the
.
“SEL”
BUZZER
BUZZER ON/OFF
SEL
Setting the Background Color
SEL In radio mode, repeatedly touch
the range to select the
item, and then usethe VOL+/- to select the back-
“ SEL ”
“wallpaper”
ground color among of the
in the mode, the monitor of unitwill change the background colorautomatically .
“wallpaper
AUTO, wallpaper: 01 ...... wallpaper: 11” ,
“AUTO”
Touch screen
Touch the screen theVOLUME- to decreasethe volume level .
Touch the screen theVOLUME+ to increasethe volume level .
VOLUME-
VOLUME+
Volume Adjusting
Volume button
A
Revolve : clockwise to increase /
Anticlockwise to decrease .
Setting The Clock
Touch briefly the rangeto show/hide the clock .Touch hold for more than 2’s
use
“CLK”
the hour will flash , theVOL+/- to adjust .Touch it again, theminute will flash, then use the VOL+/-to adjust .
CLK
-17-
TFT Monitor Adjustment
During DISC playback, use yourfinger to touch briefly the SELsection on the screen (or pressSEL button on front panel
mode)
to access the Pictureselection menu, by repeatedly touch theSEL section, and then touch the VOL+/-(or rotate the VOL+/-) to adjust theselected mode .(The corresponding value will show onthe monitor )
COLOR: 0 to 32Adjust the color for the picture-lighter ordarker.BRIGHT: 0 to 32Adjust if the picture is too bright ortoo dark.CONTRAST: 0 to 32Adjust the contrast of the bright and darkportion.TINT: 0 to 32Adjust the tint if the human skin color isunnatural.-Adjustable when NTSC is selected forNTSC/PAL .
ADJUSTABLE ITEMS:
“ ““ “
Basic Operation
ADJUSTABLE ITEMS:Volume:
Bass:
Treble:
0 to 32Adjust volume level by using VOL + / - .
-14 to +14Adjust bass level by using VOL + / - .
-14 to +14Adjust treble level by using VOL + / - .
SEL
MODE
SEL VOLUME+VOLUME-
MUTE ON
BRIGHT 16
touch to adjust
touch to select
Audio Quality Adjustment
During DISC playback, use yourfinger to touch briefly the SELsection on the screen (or pressSEL button on the front panel )
to access the Sound mode selectionmenu, by repeatedly touch the SELsection, and then touch the vol+/-(or rotate the vol+/-) to adjust theselected mode . (The correspondingvalue will show on the monitor )
SEL
Rear View Camera
When connecting the rear view camera.the mirror image of the rear view throughthe rear view camera is automaticallydisplayed on the monitor when youchange the gear to the back position.(The monitor on the unit only.)
Volume Bass Treble Balance
Contrast Bright ColorTint
FadeBuzzer
Volume Bass Treble Balance
Contrast Bright ColorTint
FadeBuzzer
MODE
SEL VOLUME+VOLUME-
MUTE ON
TREBLE +02
FLAT
DISC-IN
12: 18
touch to adjust
touch to select
-18-
Basic Operation
Balance:
Fader:
R 0-10 to L 0-10 .Adjust sound balance between leftand right speakers by using VOL + / -
F 0 10 to R 0 -10 .Adjust sound balance between front andrear speakers by using VOL + / VOL - .
.
-
The button is to be activated forthe following reasons:A. Initial installation of the unit whenall wiring is completed.B. All the function buttons do not operate.C. Error symbol on the display.
RESET
Touch the screen the DSP range(or press the EQ button on theremote control ) to select one ofthe preset sound modes .
The information will display in themonitor as follow :
(Rock/Pop/Jazz/Classic/Flat) .
Setting Audio Modes
It`s depend on your habit to select theAudio mode .
POP
FLAT
ROCK
CLASSIC
JAZZ
DSP
touch to select
GOTO
S-WOOFER
DSPOSD
FLAT
DISC-IN
16: 18
POP
TA AF CLK LUD
Reset Factory Settings
RESET button is placed on the housingand must be activated with either aballpoint pen or thin metal object.
RESETRES
ALTERNATE AUDIO/VIDEO SOURCE
On the front panel of the unit , there is anAUX IN jack, to connect analogue replaydevices. Use this jack to replay sound ofother replay equipment such asDVD players, computers, etc.Via the loudspeakers.1). Please fconnect the external device with stereojack plug the AUX IN socket .2). Press the MOD button to select theAUX IN connection.3). Use the buttons on the externaldevice itself to operate it .
ollowing the diagram below,
Headphones port
AUX IN
AUX IN
Radio Operation
-19-
Touch “ ” to next .
Touch “ ” to previous .
When an FM stereo broadcast is
hard to receive
Touch the section on
touch screen (or press button onthe remote control ) to select the MONOor STEREO mode .(When Stereo mode is activated, the STsymbol will appear . )
“STEREO/MONO”
ST/MO
Listening to the Radio
Switching To Radio Mode
Touch the screen ofrange (or press the MOD buttonon the front panel ) repeatedly to
“MODE”MODE
select the RADIO mode. the followinginformation will appears as below:
S-WOOFER
FM1 87.60 MHZ
APS
STEREO/MONO
FLAT
NO-DISC
12:06
DXST
DSP
AF
PTYBND
AFTA LUDCLK LOC/DX
MODE
SEL VOLUME+VOLUME-
MUTE ON
FM1 87.60 MHZ
1 2 3 4 5 6
FLAT
NO-DISC
12:06
DXST
Touch the range on the touchscreen (or press LO/DX button on theremote control ) to select the LOCALor DX mode .( You can choose between the LOCALand DX(DISTANCE) mode for local orlong-distance traffic news . )
“ LOC/DX ”
To tune in strong-singnal FM
Station only (LO/DX function)
FM1 FM2 FM3
AM2(MW2) AM1(MW1)
Selecting The Frequency Band
Touch the screen of
section (or press the onthe front panel ) repeatedly to
“ BND ”
BND
select the band , the message will showin turn :
BND
Start Searching For a Station
During Radio mode, briefly touch thescreen of “ ” section or press the“ ” on front panel to increase frequencyby one step of channel spacing .
Briefly touch the “ ” section or pressthe “ ” button on the front panel todecrease frequency by one step ofchannel spacing .
Manual Search
Automatic Search
During Radio mode, touch and hold(for more than 2’s ) the screen of “ / ”section or press longer the “ / ” onthe front panel to start search for a radiostation automatically .
Radio Operation
-20-
MODE
SEL VOLUME+VOLUME-
MUTE ON
FM1 87.60 MHZ
1 2 3 4 5 6
FLAT
NO-DISC
12:06
DXST
Touch to preset station
Scan Function
In Radio mode, briefly touch the
section on the touch screen ,the radio briefly plays all theAPS
preset stations of the frequency band .
APS
RDS FUNCTION
In Radio mode, touch it to selectthe desired item, it will display thefollowing as below :
S-WOOFER
FM1 87.60 MHZ
APS
STEREO/MONO
FLAT
NO-DISC
12:06
DXST
DSP
AF
PTYBND
AFTA LUDCLK LOC/DX
TA Traffic Announcement(Priority For Traffic Information)
In Radio mode, touch briefly the
screen of range to activatethe TA function.
“TA”
Touch it again to turn off the TA function .When the TA function is activated, theTA symbol appears in the display .During radio operation in one FMfrequency band the search for a trafficannouncement station is startedautomatically (TA SEEK) .If an FM station is being received whichtransmits the latest traffic announce-ments from time to time, the TP displaylights up.
TA
Storing Stations In Memory
Touch the screen of the sections“ 1-6 ”
With this system, a total of 30 stationscan be stored in the memory of sixbuttons. Each band stores up to sixpreset stations. The stations might beFM1, FM2, FM3, AM1(MW1), andAM2(MW2) band.The operation is as below :
-Retrieve a preset station
1-6 sectionsTouch the briefly to retrievea station which had been stored in thememory in advance the chose numberis shown on display .
-Store in Memory
> Select the frequency band> Select the station> Keep the desired memory key pressedin until the station is heard again after abrief interruption .
e.g. FM1, for the stronger signallevel until the search cycle has finished .The six strongest stations are thenallocated to the corresponding storagelocations . Then the station of the firststorage location is set .
Automatic Memory Storing &Program Scanning
Automatic Preset Setup
In Radio Mode, Touch and keep theAPS section on the touch screenfor about 2 seconds to active
APS
automatic station storage. The radiosearches within the current frequencyband,
AF
AF FUNCTION(Alternative Frequencies)
AF is a function that works with the helpof RDS (Radio Data System) and canonly be used with FM stations . The radiosearches in the background for the bestfrequency reception of the station thathas been tuned into .
Touch the AF section on touch screen orswing and keep the SEL knob in theTA/AF direction for about 2 seconds ,the AF function is activated. The AFsymbol appears in the display .
When the AF function has been switchedon, the radio continuously tests thesignal strength of the AF frequency .The test interval for each AF frequencydepends on the signal strength of thecurrent station and varies from a fewminutes in the case of weak signals.Whenever the new AF frequency isstronger than the station that is currentlytuned in , the radio switched to thisfrequency for a short time for a shorttime and the message“NEW FREQUENCY “ is displayed forone or two seconds.
In Radio mode, touch briefly the
screen of range to activatethe AF function. Touch it againto turn off the AF function .
“AF”
Radio Operation
-21-
When the TA function is switched on ,the FM traffic automatically interrupt CDoperation(the word TRAFFIC appearsin the display).
The volume level is increased to theminimum value for the transmission oftraffic announcements.
After the traffic announcements hasfinished, the program that was previouslyrunning is resumed.
Interruption of the TA Function:if you would like to interrupt the currenttraffic announcement, touch the TAsection on screen briefly . This doesswitch off the TA mode .
the status of the AF function is shown byan AF symbol in the display.
If the AF symbol appears in the display,the AF function is switched on and RDStransmission date is being received .If the AF symbol flashes in the display,the AF function is selected but no RDSsignal can be received at the moment .
Note :
PTY FUNCTION
In Radio mode, touch the screenof “PTY” range to select theProgram type .
besides the stations name, some FMstations also transmit information on thetype of program. This information canbe displayed by your car radio .
PTY Selection of the program type
Examples of such types of programare :
SPORT NEWS POP WEATHER ......
With PTY function you can specificallyselect stations transmitting a particulartype of program. Touch the PTY rangeon screen repeatedly to call up the PTYselection menu . The message“PTY SEEK” then appears briefly in thedisplay .
When PTY has been selected the radiostarts searching for corresponding PTYinformation and stops when the PTYinformation has been found, “NO PTY”appears in the display. If the PTYinformation being searched for no longerexists, the PTY function automaticallyswitches to normal mode .
PTY
MODE
SEL VOLUME+VOLUME-
MUTE ON
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
DISC Operation
-22-
Basic Operation
During DISC playback, you can touchthe screen to display the following:
Switching the DVD mode
Touch the screen of range (orpress MOD button on the front panel ) toselect the DISC mode, it display likefollowing :
“MODE”
Function setup
(different the source the display is different)
Touch “ ” to next .
Touch “ ” to previous .
MODE
SEL VOLUME+VOLUME-
MUTE ON
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
DVD 1-0:00:16
OK
FLAT
DISC-IN
12: 16
Stopping Play
Touch the screen the range (orpress the button on remotecontrol .) To stop the unit playback.Touch the section or pressbutton on front panel to start play.
Pause (still picture)
Touch the “ ” section on touchscreen during playback will stopplay temporary, touch it again toreturn the normal playback .
TITLE
DVD 1-0:00:16
AUDIO ZOOMSUBTITLE
FLAT
DISC-IN
12: 16
RANDOM REPEAT INTRO
SETUP
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
GOTO
S-WOOFER
DSPOSD
TA AF CLK LUD
DVD/VCD/CD/MP3:Normal Playback 2x 4x 8x 16x
Rapid Forward/Rapid Reverse
During DISC playback, touch thescreen of “ / ” range or presslonger (more than 2’s) the “ / ”button on the front panel ,the speed of rapid forward/reversechanges according to the disc asfollow:
TITLE
DVD 1-0:00:16
AUDIO ZOOMSUBTITLE
FLAT
DISC-IN
12: 16
RANDOM REPEAT INTRO
SETUP
DISC Operation
-23-
Subwoofer Function
Use your finger touch the
“ section on thescreen to turn on the Subwooferfunction, touch it again tocancel function .
S-WOOFER “
S-WOOFER
Selecting The Play Modes
During the Disc playback, touch thetouch screen, it will display the followingas below :
Touch to select
1). Repeat Function
FOR DVD :
Touch the screen the of
(or press longer button on theremote control) to select REPEAT modeas follow :
“REPEAT”
2/RPT
range
REPEAT ALL
CHAPTER REPEAT ON TITLE REPEAT ON
1. Continuously repeat at the currentchapter/track, when selected REP-ONEmode .2. Select REP-ALL mode to continuouslyrepeat all chapter/track on the currentdisc .
REPEAT OFF
REPEAT ONE REPEAT ALL
FOR VCD/CD/MP3 :
Touch the screen the of
(or press longer button on theremote control) to select REPEAT modeas follow :
“REPEAT”
2/RPT
range
2). RDM(RANDOM) Function
During DISC playback, touch screen of
section ( press the
button longer on the remote control toplay in random.
“RANDOM” 4/RDM
Zoom Function
Repeatedly touch the section ofthe ZOOM, the displaying ratecan be 2x, 3x, 4x, 1/2, 1/3, 1/4 .
Use the direction keys ( / / / onremote control or / / / on touchscreen) to move the enlarged picture .Note: During the JPEG disc playback ,touch the screen of “ZOOM” range , the“zoom 100%” word will display, then youcan touch longer (more than 2’s) the /
section on touch screen (or press the/ buttons on remote control ) to
zoom in/zoom out the picture. In zoomedmode, use the direction keys to movethe enlarged picture .
ZOOM
Skipping Track
Loud Function
Touch the screen of rangeto switch the Loudness functionON or OFF.
“ LUD ”LUD
During DISC playback, Touch the/ section on the touch screen
to skip to next/back one track.(You can also press the / onthe front panel to skip to next /backone track.)
Note :1. In DVD mode, touch the sectioncontinually twice to back one track .(Press the button continually twiceto back one track .)2. For some VCD2.0 disc (PBC-playbackcontrol), above these buttons may beunavailable .
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
GOTO
S-WOOFER
DSPOSD
TA AF CLK LUD
-24-
DISC Operation
NOTE : For MP3, the 3/INT button is notavailable.
FOR CD :
Touch the screen of the section
(or longer press the button on the
remote control ) to play the previous 6seconds part of each track/chapter ondisc. (Touch it again to cancel this mode)
“INTRO”
3/INT
3). INT Function
FOR VCD :
Touch the screen of the section
(or long press the button on the
the remote control ). It display willfollowing menu as below :(touch it again to cancel this mode .)
“INTRO”
3/INTer
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
Use the UP, DOWN, LEFT and RIGHTarrows on the remote to select the item,and then press ENTER to confirm .
FOR DVD :
Touch the screen of the section
(or long press the button on the
the remote control ). It display willfollowing menu as below :(touch it again to cancel this mode .)
“INTRO”
3/INTer
Use the UP, DOWN, LEFT and RIGHTarrows on the remote to select the item,and then press ENTER to confirm .
SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL
Each playing, the order is different .(Depend on the disc used for VCD).Touch it again to cancel this function .Note : in random mode, the button isnot available .
DISC Search (GOTO)
Touch to select
FOR DVD :
Touch the screen the of range
(or press on the remote
control ) Twice, the screen will displaythe following message :
“GOTO”
GOTOthe button
Title 01/01 Time -:--:--
0:10:36
You can select the item you want towatch through TIME setting by usingnumberic buttons . (E.x. 0:10:36)
FOR VCD (With PBC OFF):
Touch the screen the of range
(or press GOTO on the remote
control )Once, the screen will display thefollowing message :
“GOTO”
the button
Disc Go To --:--
00:36
Use the numberic buttons to input thetime directly (E.x. : 00:36)
GOTO ENTER
0 1 2 3 4 5
FLAT
DISC-IN
12:16
DVD 1-0:00:16
6 7 8 9 +10
-25-
DISC Operation
AUX Operation
oconnect analogue replay devices.Use this jack to replay sound of otherreplay equipment such as DVD players,computers, etc. Via the loudspeakers.
On the front panel of this unit, there is anAUX IN jack, follow the diagram below t
3) You now hear the sound from theexternal device played back throughthe loudspeakers .
4) Touch the volume+/- sections ontouch screen or use the VOL+/- onthe remote to adjust the volume level.
Touch and hold the / section onthe touch screen , you can select thetitle or chapter of DVD . (Only for theDVD with title /chapter.)
Note:
VOLUME+
AUX IN
VOLUME-
FLAT
DISC-IN
12: 16
MODE MUTE ON
SEL
DSP
S-WOOFERLUDCLKAFTA
1) Please connect the external devicewith stereo jack plug the Aux in socket .
2) Touch the MOD section on screenor press the MOD button to select theAUX IN connection. It will display thefollowing as below :
AUX IN JACK FRONT PANEL
MOD
VIDEO IN (yellow)
RCH IN (red)
LCH IN (white)
AUX IN
-26-
NOTE:
For CD and MP3,the message will
always display on the screen.
SINGLE ELAPSED SINGLE REMAIN
3.Example for MP3:
Each time is pressed or touch , the
message displayed on screen changes
as follows:
OSD
E.Touch or Press for the fifth time:
The message on the screen will be
cleared for SVCD and VCD.
OSD
SINGLE ELAPSED
TRACK 01/16 0:00:56
SINGLE REMAIN
TRACK 01/16 0:05:10
TOTAL ELAPSED
TRACK 01/16 0:31:36
TOTAL REMAIN
TRACK 01/16 0:36:26
2.Example for VCD/SVCD/CD:
A.Touch or Press for first time:OSD
B.Touch or Press for second time:OSD
C.Touch or Press for hird time:OSD
D.Touch or Press for fourth time:OSD
DISC Operation
E. Touch or Press for fifth time:
The message on the screen will be
cleared.
OSD
TITLE ELAPSED
T 01/01 C 01/38 0:02:06
TITLE REMAIN
T 01/01 C 01/38 3:24:36
CHAPTER ELAPSED
T 01/01 C 01/38 0:02:56
CHAPTER REMAIN
T 01/01 C 01/38 0:04:32
ON-SCREEN DISPLAY FUNCTION
During playback, touch the screen
the OSD section (or press the OSD
on the remote), it will display the
following as below :
1. DVD:
A.Touch or Press for first time:OSD
Title Number, Total Title Number,
Chapter Number, Total Chapter Number
of this Title of the disc currently being
played will be shown on the screen,
along with the elapsed time.
B.Touch or Press for second time:OSD
C.Touch or Press for hird time:OSD
D.Touch or Press for fourth time:OSD
OSD
MONO LEFT MONO RIGHT
STEREO
MIX-MONO
For VCD/CD:AUDIO
AUDIO
during playback, touch thesection of the touch screen or Press
on the remote . It is possible toswitch the sound between monauraland stereo sound.
-27-
DISC Special Functions
DVD/VCD Special Function
During DVD playback. Touchthe section on touchscreen(or press the SUBTITLEon the remote) .
SUBTITLE
1. Multi-subtitle LanguageFunction (for DVD Only)
Notes:- The language number is different
according to the disc.- Some discs only contain one subtitle
language.- When no different subtitle language
are recorded, will be displayedat screen left top corner.
Each time the button is pressed or touch,number of the subtitle language changesin sequential order.
SUBTITLE
2. Multi-Audio Language Function
For DVD:During DVD playback , touchthe section on touchscreen (or press the AUDIO
AUDIO
on the remote .) Each time the button ispressed or touch , number of the audiosoundtrack language changes onsequential order.
Notes:- The language number is different
according to the disc.- Some disc only contain one language
soundtrack- When no different language
soundtrack are recorded will bedisplay at screen left top corner.
AUDIO
TITLE
DVD 1-0:00:16
AUDIO ZOOMSUBTITLE
FLAT
DISC-IN
12: 16
RANDOM REPEAT INTRO
SETUP
Touch to select
During DVD playback, touch thesection or Press ANGLE button
on the remote . Each time thebutton is pressed or touch,number
3. Multi-Angle Function(for DVD Only)
of the angle changes in sequentialorder.Notes:- The angle number is different
according to the disc.- The function only work for disc having
scenes recorded at different angles.- When no different angle are recorded,
will be displayed at screen left topcorner.
For DVD:If the DVD has multiple titlesrecorded on the disc. It canselect preferred title from the
4. Title Menu Function
title menu to start playback.- During DVD playback, touch the
section or press TITLE button on theremote .The title menu is display.
- Touch the cursor button shown in TVscreen, select preferred title by thecursor button and confirmed by touchENT button .
Press button on the remotecontrol while the disc is playing, you canswitch between "PBC on"and "PBC off"mode.
TITLE
TITLE/PBCFor VCD:
TITLE
Setup
-28-
USING THE MENU
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set TV Display Mode
TV DisplayNormal/PS
Normal/LB
Wide
Normal/LB
GENERAL SETUP
1.TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Select when a wide-screen TV set is
connected.
Normal/PS (For 4:3 TV)
Normal/LB (For 4:3 TV)
Wide (For 16:9 TV)
16:9 4:3 Letter Box
4:3 Pan Scan
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
LB
ON
ENG
SPDIF/RAW
ON
ON
ON
DOLBY
....GENERAL SETUP PAGE....
Go To General Setup Page
Overview Of The Main Menu
DOLBY
( )1 ( )2 ( )3 ( )4(1) General Settings
(2) Speaker Settings
(3) DOLBY Digital Settings
(4) Preference Settings
TV Setting
OK
Enter Up Down Left RightPrevious
Touch to select
The Following Buttons For Entering
The Selection .
The buttons of the left and right are forselection of setting type .The buttons of the up and down are forselection of the setting program .
1. Touch the screen of range
or press the button on remote .
2.The SETUP menu is displayed.
3.Select the preferred item by touch the
/ / / range on the screen
or by using the / / / buttons .
4.Touch screen of the range or
Press on the remote to confirm .
“ SETUP ”
SETUP
“ OK ”
ENTER
-29-
Setup
5.CAPTIONS SETUPActivate the CAPTIONS feature byselecting ON. And release this feat-ure by selecting OFF.
2.ANGLE MARK DISPLAY SETUPIf it is set to ON, when the multi-angleDVD disc is playing, (the anglemark) will appears on the screen; if isset to OFF, the mark will not appear.
4.SPDIF OUTPUTThis is to activate the audio outputfrom SPDIF OFF mode to SPDIF/RAWmode to SPDIF/PCM mode.
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set Angle Mark
ON
OFF
ONAngle Mark
OSD Lang
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set OSD language
English
French
German
Spanish
Italian
Portuguese
OSD Lang
English
OSD Lang
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
DOLBY
....GENERAL SETUP PAGE....
Setup SPDIF
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
Spdif Output SPDIF/RAW
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
DOLBY
....GENERAL SETUP PAGE....
Closed Caption
ON
OFF
ON
Captions
GENERAL SETUP
LANGUAGE DISPLAYING
3.OSD LANG TYPE SETUPTouch the / section on the touchscreen or press the / button on theremote to select the preferred OSD
language , then touch the section
to confirm .
OK
Setup
6.SCREENSAVER SETUPIf the screen displays a static image fortoo long, some "burn-in" may occur,leaving a permanent trace of the imagebehind. To avoid this, turn ON theSCREENSAVER item. After a shortperiod of inactivity on the monitor, theunit will substitute a moving image toavoid burn-in.
7.LAST MEMORY SETUPSelect the LAST MEMORY outputON/OFF.
SPEAKER SETUP
DOLBY DOWNMIXMany DVD discs are recorded using asurround sound recording technologycalled Dolby AC3 5.1. When such a discis played in a normal 2- or 4-channelplayback unit like this one, the surroundsound must be "downmixed" to stereo.In this case, choose "stereo," unless theoutput from this unit is connected to amobile Dolby surround sound system.In that case, choose LT/RT.
DOLBY DIGITAL SETUP
DYNAMIC RANGE CONTROLSelect DRC and adjust the dynamicrange of a Dolby Digital encodedprogram. There are 8 steps betweenfull compression and off compression.
GENERAL SETUP
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
DOLBY
....GENERAL SETUP PAGE....
Screen Saver
Screen Saver ON
OFF
ON
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set Last Memory State
ON
OFF
ONLast Memory
DOWNMIX
DOLBY
....Speaker Setup Page....
Set Downmix Mode
LT/RT
STEREO
DOWNMIX
STEREO
....DOLBY Digital Setup....
Set DRC OFF
DOWNMIXDYNAMIC
DOLBY
FULL
6/8
4/8
OFF
2/8
.....Speaker Setup Page.....
-30-
Setup
OSD Lang
Preferred Audio Language
English
French
German
Spanish
Italian
Portuguese
EnglishTV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
DOLBY
....Preference Page....
Audio
--- PREFERENCES PAGE ---
1. TV TYPE SETUPThis player is capable of playing discsrecorded in either PAL or NTSC formats.Make the selection based on whether youare connecting the unit to a PAL TV or anNTSC TV. You can also set the unit toAUTO (autoselect). The disadvantage toautoselect is that each time you turn theunit on it checks to see what kind ofmonitor is connected, which causes asmall delay and some flickering of thedisplay image which you may findunpleasant.
2.AUDIO LANGUAGE SETUPSelect the preferred AUDIO soundtracklanguage using the cursor buttons.
3.SUBTITLE LANGUAGE SETUPSelect the preferred SUBTITLElanguage by using the cursor buttons.
4.DISC MENU LANGUAGE SETUPSelect the preferred DISC MENUlanguage by using the cursorbuttons.
OSD Lang
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
DOLBY
....Preference Page....
Set TV Standard
PAL
AUTO
NTSCNTSC
TV Type
OSD Lang
Preferred Subtitle Language
English
French
German
Spanish
Italian
Portuguese
Off
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
DOLBY
....Preference Page....
Subtitle
Off
OSD Lang
Preferred Menu Language
English
French
German
Spanish
Italian
Portuguese
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
DOLBY
....Preference Page....
Disc Menu
English
-31-
Setup
5.PARENTALSelect suitable parental guidance withthe cursor buttons and confirm it bypressing the ENTER button.
6.PASSWORD SELECTIONThe password must be used to makechanges to the Parental Control menuabove. The factory default password is
. To change this password, presschange. You will be asked for the currentpassword. Once you have entered it,you have the opportunity to change it.Then, when you enter the ParentalControl menu, you will be required touse this new password in order to makeany changes.
1379
7.DEFAULTSSelecting the DEFAULT item andconfirming RESET will return ALLpersonal settings you have made,including radio and TV presets, to thefactory default settings.
DEFAULTS TABLE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL
PREFERENCES
TV DISPLAY
ANGLE MARK
SPDIF OUPUT
OSD LANGUAGE
CAPTIONS
LAST MEMORY
DOWNMIX
DYNAMIC
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
NORMAL/LB
ON
ON
ENGLISH
ON
STEREO
AUTO
ENGLISH
OFF
ENGLISH
8 ADULT
1379
ON
OFF
SCR SAVER
SPDIF/RAM
OSD Lang
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
DOLBY
....Preference Page....
Set Parental Control
4PG13
5PGR
6R
7NC 17
8ADULT
OFF
8ADULTParental
--- PREFERENCES PAGE ---
OSD Lang
Changed Password
CHANGE
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
DOLBY
....Preference Page....
CHANGE
Password
OSD Lang
Load Factory Setting
RESET
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
DOLBY
....Preference Page....
RESETDefault
Age control
-32-
Other Main Operation
Important Note:To prevent damage to the USB device,do not remove or disconnect it duringplayback. it is also a good practice toremove the USB drive during discplayback.
In USB Playback mode
REPEATREPEAT
Use the UP, DOWN, RIGHT or LEFTbuttons to navigate to and select filesto play, and press ENTER to beginplayback (or viewing, in the case ofJPEG files). To skip to the next or lasttrack, touch or press the or .Press the or buttons for FastForward or Fast Reverse playback.
play modes are also availableby repeatedly pushing untilthe desired mode is found.
Following the diagram below, connectyour USB device to the front panelUSB port . If it is properly connected,the device will be mounted and startplaying automatically.
-33-
Changing From USB to DISC PlaybackmodesIf you are in USB Playback mode andwish to begin playback of a disc alreadyin the player, touch the range on thetouch screen or press the STOP on theremote once. Then touch GOTO rangeon the screen or press the GOTO on theremote and the player will switch toDVD/VCD/CD/MP3 Playback mode.
Changing From DISC to USB PlaybackModesIf the disc present in the player is anMP3 disc, touch section on screenor press the STOP on remote once thentouch or press the GOTO to USBplayback.If the disc present in the player is anDVD or VCD or CD disc, touch onthe screen or press STOP twice on theremote then touch GOTO section onthe screen or press the GOTO buttonon the remote to USB playback.
USB Operation
Other Main Operation
Inserting and removing a SD or MMC card on the front panel of unit .
SD/MMC card OPERATION
Mode change to SD/MMC cardAfter a SD or MMC card was inserted into the main unit card slot . The unit will startsplaying the files contained on the memory card . Once the unit read the memory cardsuccessfully, the first file on the memory card will automatically start play back .Press the mode button repeatedly is allowing changing to other modes .
The unit can support playback MP3/WMA/JPEG/MP4 and Divx format which arestored into SD and MMC memory card .Please read below before you start the operation of memory card .
File Playback OperationAll the SD or MMC memory car playback operation function is same as the operationon .Please to operation for more details .
CD/MP3/WMA“ MP3/WMA”
Change DISC to SD/MMC cardThe operations are same as USB mode, refer to see USB operation .
Change SD/MMC card to DISCThe operations are same as USB mode, refer to see USB operation .
-34-
Press in till heard a .“CLICK”
Removing the SD or MMC card .
Remove the memory card .
Inserting the SD or MMC card .
Insert the memory card into slotwith label side facing backward .
Press in till heard a .“CLICK”
Label side facingbackward
Other Main Operation
00:56 04:07
003/112
Repeat one
Mp3
Mp3
Mp3
....... .......
K P
woman 1
new ton
1
2
3
4 5 6 1 Current track(file)(highlighted bar)2
Elapsed playing time of the currenttrack(
4 total playing time.
5 Operation mode icon. (Play),(stop), (pause), (forward)(reverse).
6
Current track (file) number/totalnumber of tracks(files) in the currentfolder.
3not available for JPEG disc)
( not available forJPEG disc)
Selected playback mode
Touch the screen, it will display the following as below :(when the parking brake is applied .)
MP3/WMA/JPEG/MPEG4 DISC PLAYWhen you insert a disc which contains MP3, WMA or JPEG files, the different filetypes are detected, and a list of the files are produced, as shown in the diagrambelow.
-35-
In stop mode, touch the / / / sections on touch screen (or Use / / /
on the remote control ) to select the item or folder, then touch the range
(or press button on the remote control ) to confirm.
“OK”
ENTER
Touch the screen of range or press longer on the remote controlrepeatedly can select two kinds of repeat play mode.
Play the same song over and over again.
Play all songs on the disc, then repeats the entire disc over and over again .
“REPEAT ” “REPEAT”
REP-ONE:
REP ALL:
MODE
SEL VOLUME+VOLUME-
MUTE ON
MP3 02-0:36:20
FLAT
DISC-IN
08: 16
Touch repeatedly OK
FLAT
DISC-IN
12: 16
MP3 02-0:36:20
1. Touch the or section to skip a track ahead or back.2. Press the or button to skip a track ahead or back.
Moving To Another Track :
1. Touch briefly the “ / ” range on touch screen for fast forward / fast backward.2. Press longer the or button for forward or backward .
Fast Forward/Fast Backward
Specification
-36-
TFT Monitor:Monitor Screen Size: 7 Inch WideNumber of Pixels: 480 X RGB X 234 pixelsColor System: NTSC/PAL
NOTE:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
RADIO Section:
For 3 Bands For 2 Bands For 2 Bands
(Europe) (Europe) (U.S.A.)
FM FM FM
Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz
IF: 10.7 MHz 10.7 MHz 10.7 MHz
Sensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBu
MW MW AM
Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHz
IF: 450 KHz 450 KHz 450 KHz
Sensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBu
Audio Signal Output: 2ch&4ch line out
Characteristics: (1)Frequency Response 20 Hz - 20 KHz
(2)S/N Ratio 90 dB (JIS)
(3)Wow and Flutter Below measurable limits
Generall :
Supply Voltage: 12V DC (11V-15V)
Current Consumption: Less than10 A
Signal System: Compositive video 1.0Vp-p 75
Discs Played: (1)DVD-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
888-J9000-03S
Before going through the check list, check wiring connection. If any of the problemspersist after check list has been made, consult your nearest service dealer.
Trouble Shooting
-37-
Inserting the disc in reversedirection
Press the RESET button.Front panel is not properly fixedinto its place
The car ignition switch isnot on
If the power supply is properlyconnected to the car accessoryterminal,switch the ignition keyto "ACC"
The fuse is blown Replace the fuse
Presence of disc inside theplayer.
Remove the disc in the player,then put a new one
Insert the compact disc withthe label facing upward
The disc is extremely dirtyor defective
Clean the disc or try to play anew one
Temperature inside the caris too high
Cool off or until the ambienttemperature return to normal
The built-in microcomputeris not operating properlydue to noiseThe antenna cable is notconnected
Insert the antenna cable firmly
The signals are too weak Select a station manually
SYMPTOM CAUSE SOLUTION
Television/videoimageappearsblack-white
The color system isset incorrectly
Please switch to correct colorsystem from menu
No television/videoimage appears
The unit is not connectedto the parking brakedetection switch
Make proper connection
according to wire connection“ ”
The parking brake is notengaged
For safety reasons no television/video images are displayedwhile the vehicle is moving.Engaging the parking brake willcause images to be displayed.
The operation keysdo not work
The radio does notwork
Disc can not beloaded or ejected
No power
No color in pictureThe disc format is notaccordingto the TV-setused (PAL/NTSC)
Please the television mode ofthe choice accommodation
JPEG disc cannot be playedback
No JPEG files are recordedon the disc.
JPEG files are not recordedin a compliant formant
Change the disc Record JPEGfiles using a compliantapplication
Change the disc