www.elsteel.com The best technical solution at the best possible price

PLUG & POWER

Patented

Plug & Power

Imagine a separation plate with plug-in facilities:

for any size motor starter!for any size breaker!in any position!with any brand!

Removable or withdrawable!

This leaflet deals with Plug & Power.Techno Module available in the Constructors Manual

Specifications of Plug-in

ELSTEEL

Design verified IEC 61439 üArc fault IEC 61641 üAny unit size, fitted anywherein the system ü

No tools needed for insertionor removal of units ü

New breakers can be addedanywhere in the panel ü

Fastest way of constructiondue to pre-assembled units ü

Locked position without screws ü

Breakers or starters can be replaced ü

Cable termination left or right ü

Fully insulated busbar optional ü

Dual purpose, breaker or

motor starterü

Plugs directly to the busbar üAny breaker brand can be

usedü

5 pole incoming üDOL or ∆ ükA rating 80kA/ 1 sec. ü

Removable units - when you need to add or replace a breaker on a live panel!

Incoming connections are plug type. Outgoing connections are fixed type.

Specifications of Withdrawables

ELSTEEL

Design verified IEC 61439 üArc fault IEC 61641 üAny unit size, fitted anywherein the system ü

All cables are terminated in theside cable compartment ü

No tools needed for insertionor removal of units ü

A unit is replaced in seconds! ü

Heavy duty SS handles and mechanism ü

Pull, plug, release and testfunctions, all in one handle ü

All electrical components can be “lifted”out of the units ü

Plugs directly to the busbar üSafety lock while removing the

unitü

Optional shutters üCan have termination left/ rightor back ü

Lockable in “on” and “service”

positionü

Fully insulated busbar optional ü

Any breaker brand can be

usedü

5 pole incoming üDOL or ∆ ükA rating 80kA/ 1 sec. ü

Withdrawable units - make fast replacements in an emergency or save the cost of production stand-still!

Incoming connections are plug type. Outgoing connections are plug type.

TYPE DESCRIPTION NOMINAL SIZE (W×H) QTY ORDER No.

PVSP 4.10 VERTICAL SEPARATION PLATES 400 × 1000 01 34420

PVSP 4.12 VERTICAL SEPARATION PLATES 400 × 1200 01 34421

PVSP 4.14 VERTICAL SEPARATION PLATES 400 × 1400 01 34422

PVSP 4.16 VERTICAL SEPARATION PLATES 400 × 1600 01 34423

TYPE DESCRIPTION SIZE (W×H) QTY ORDER No.

PBC6.10 FILLER PLATE FOR 600 WIDTH 600×1000 01 34430

PBC6.12 FILLER PLATE FOR 600 WIDTH 600×1200 01 34431

PBC6.14 FILLER PLATE FOR 600 WIDTH 600×1400 01 34432

PBC6.16 FILLER PLATE FOR 600 WIDTH 600×1600 01 34433

12 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

SEPERATION PLATE

SEPERATIONS PLADE

SCHOTTUNG

FILLER PLATE FOR 600 WIDTH

BAGPLADE FOR 600 BREDDE

ZUSATZ-RÜCKWAND FÜR 600mm BREITE

Разделительная панель

Установочная панель

13LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPE DESCRIPTION QTY ORDER No.

TBCV 4 TOP & BOTTOM COVER 400 01 21615

TBCV 6 TOP & BOTTOM COVER 600 01 21616

TYPE DESCRIPTION

MAX. DISTANCEBETWEEN BUSBAR

HOLDERS

SHORT CIRCUIT

QTY ORDER No.

RBH 3 REAR BUSBAR HOLDER FOR 1×10×30 Cu 200mm 35kA/1s 01 21602

RBH 4 REAR BUSBAR HOLDER FOR 1×10×40 Cu 200mm 50kA/1s 01 21603

RBH 8-1 REAR BUSBAR HOLDER FOR 1×10×80 Cu 200mm 50kA/1s 01 21604

RBH 8-2 REAR BUSBAR HOLDER FOR 1×10×80 Cu 100mm 80kA/1s 01 21605

TYPE DESCRIPTION QTY ORDER No.

MBO MOTHER BOARD 01 21600

TYPE DESCRIPTIONDISTANCE BETWEEN BUSBAR HOLDERS

QTY ORDER No.

BUIN 1 BUSBAR INSULATION 100mm 100mm 01 SET 21610

BUIN 2 BUSBAR INSULATION 200mm 200mm 01 SET 21611

14 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

REAR BUSBAR HOLDER

SKINNEHOLDER

SAMMELSCHIENEN-HALTER

MOTHER BOARD

MOTHER BOARD

MOTHER BOARD

BUSBAR INSULATION

SKINNE ISOLERING

SAMMELSCHIENEN-ISOLIERUNG

TOP & BOTTOM COVER

TOP & BUND AFDÆKNING

SCHOTTUNG OBEN / UNTEN

Монтажное основание

Задний шинодержатель

Шинная изоляция

Верхняя и нижняя перегородка

15LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPE DESCRIPTIONRATED

CURRENTSHORTCIRCUIT

QTY ORDER No.

CCO 1.8 CONNECTION FOR 10×80 DROPPER BUSBAR 1250A 80 kA/1s 01 SET 21241

TYPE DESCRIPTIONRATED

CURRENTSHORTCIRCUIT

QTY ORDER No.

CCO 1.4 CONNECTION FOR 10×40 DROPPER BUSBAR 800A 50 kA/1s 01 SET 21240

16 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

CONNECTIONFOR DROPPER BUSBAR

UP TO 800A

LASKER FOR 800A

VERBINDUNGSLASCHE 800A

CONNECTIONFOR DROPPER BUSBAR

1250A

LASKER FOR 1250A

VERBINDUNGSLASCHE 1250A

СВЯЗИДЛЯ ШИН ПИПЕТКУ ДО 800A

СВЯЗИДЛЯ ШИН ПИПЕТКУ 1250A

17LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPE DESCRIPTIONRATED

CURRENTSHORTCIRCUIT

QTY ORDER No.

HVCP 4-2 H TO V CONNECTOR - 2 BUSBAR PER PHASE 800A 50 kA/1s 1 SET 20895

HVCP 4-3 H TO V CONNECTOR - 3 BUSBAR PER PHASE 800A 50 kA/1s 1 SET 20896

HVCP 4-4 H TO V CONNECTOR - 4 BUSBAR PER PHASE 800A 50 kA/1s 1 SET 20897

HVCP 4-2.2 H TO V CONNECTOR - 2 BUSBAR PER PHASE 1250A 80 kA/1s 1 SET 20898

HVCP 4-3.2 H TO V CONNECTOR - 3 BUSBAR PER PHASE 1250A 80 kA/1s 1 SET 20899

HVCP 4-4.2 H TO V CONNECTOR - 4 BUSBAR PER PHASE 1250A 80 kA/1s 1 SET 20901

TYPE DESCRIPTIONRATED

CURRENTSHORTCIRCUIT

QTY ORDER No.

HVCP 2-2 H TO V CONNECTOR - 2 BUSBAR PER PHASE 800A 50 kA/1s 1 SET 20891

HVCP 2-3 H TO V CONNECTOR - 3 BUSBAR PER PHASE 800A 50 kA/1s 1 SET 20892

HVCP 2-4 H TO V CONNECTOR - 4 BUSBAR PER PHASE 800A 50 kA/1s 1 SET 20893

HVCP 2-2.2 H TO V CONNECTOR - 2 BUSBAR PER PHASE 1250A 80 kA/1s 1 SET 20894

18 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

HORIZONTAL TO VERTICALCONNECTOR FOR

200 DEEP BUSBAR CHAMBER

HORIZONTAL TO VERTICALCONNECTOR FOR

400 DEEP BUSBAR CHAMBER

HORIZONTAL ZU VERTIKALVERBINDUNG FÜR

200 TIEF SAMMELSCHIENENRAUM

VANDRET TIL LODRETLASKE FOR

200 DYBT SKINNEFELT

Горизонтального до вертикального соединитель для

200 DEEP ПАЛАТА ШИН

HORIZONTAL ZU VERTIKALVERBINDUNG FÜR

400 TIEF SAMMELSCHIENENRAUM

VANDRET TIL LODRETLASKE FOR

400 DYBT SKINNEFELT

Горизонтального до вертикального соединитель для

400 DEEP ПАЛАТА ШИН

19LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPE DESCRIPTIONSIZE

(W×H)RATED

CURRENT

INCOMINGPOWER

CONTACTSQTY ORDER No.

RUP 6.1-80 REMOVABLE UNIT 600×100 80A 3P+N+E 01 35410

RUP 6.1.5-80 REMOVABLE UNIT 600×150 80A 3P+N+E 01 35411

RUP 6.2-80 REMOVABLE UNIT 600×200 80A 3P+N+E 01 35412

RUP 6.1.5-160 REMOVABLE UNIT 600×150 160A 3P+N+E 01 35413

RUP 6.2-250 REMOVABLE UNIT 600×200 250A 3P+N+E 01 35414

RUP 6.3-250 REMOVABLE UNIT 600×300 250A 3P+N+E 01 35415

RUP 6.4-400 REMOVABLE UNIT 600×400 400A 3P+N+E 01 35416

RUP 6.4-630 REMOVABLE UNIT 600×400 630A 3P+N+E 01 35417

RUP 6.6-630 REMOVABLE UNIT 600×600 630A 3P+N+E 01 35418

TYPE DESCRIPTIONSIZE

(W×H)RATED

CURRENT

INCOMINGPOWER

CONTACTSQTY ORDER No.

RUP 4.1-80 REMOVABLE UNIT 400×100 80A 3P+N+E 01 35400

RUP 4.1.5-80 REMOVABLE UNIT 400×150 80A 3P+N+E 01 35401

RUP 4.2-80 REMOVABLE UNIT 400×200 80A 3P+N+E 01 35402

RUP 4.1.5-160 REMOVABLE UNIT 400×150 160A 3P+N+E 01 35403

RUP 4.2-250 REMOVABLE UNIT 400×200 250A 3P+N+E 01 35404

RUP 4.3-250 REMOVABLE UNIT 400×300 250A 3P+N+E 01 35405

RUP 4.4-250 REMOVABLE UNIT 400×400 250A 3P+N+E 01 35406

1: ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

REMOVABLE UNITFEEDER

400 WIDE

PLUG-IN INDSATS 400

STECKEINSATZ 400ABGÄNGE

REMOVABLE UNITFEEDER

600 WIDE

PLUG-IN INDSATS 600

STECKEINSATZ 600ABGÄNGE

See page no.23,25,27 for selection of Mounting plates

Втычной модуль шириной400 для

распредельных нагрузок

Втычной модуль шириной600 для

распредельных нагрузокSee page no.24,26,28 for selection of Mounting plates

21LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPE DESCRIPTIONSIZE

(W×H)RATED

CURRENT

INCOMINGPOWER

CONTACTSQTY ORDER No.

RUPM 6.1-80 REMOVABLE UNIT 600×100 80A 3P+N+E 01 35430

RUPM 6.1.5-80 REMOVABLE UNIT 600×150 80A 3P+N+E 01 35431

RUPM 6.2-80 REMOVABLE UNIT 600×200 80A 3P+N+E 01 35432

RUPM 6.3-80 REMOVABLE UNIT 600×300 80A 3P+N+E 01 35433

RUPM 6.4-80 REMOVABLE UNIT 600×400 80A 3P+N+E 01 35434

RUPM 6.3-250 REMOVABLE UNIT 600×300 250A 3P+N+E 01 35435

RUPM 6.4-250 REMOVABLE UNIT 600×400 250A 3P+N+E 01 35436

RUPM 6.6-250 REMOVABLE UNIT 600×600 250A 3P+N+E 01 35437

TYPE DESCRIPTIONSIZE

(W×H)RATED

CURRENT

INCOMINGPOWER

CONTACTSQTY ORDER No.

RUPM 4.1-80 REMOVABLE UNIT 400×100 80A 3P+N+E 01 35420

RUPM 4.1.5-80 REMOVABLE UNIT 400×150 80A 3P+N+E 01 35421

RUPM 4.2-80 REMOVABLE UNIT 400×200 80A 3P+N+E 01 35422

RUPM 4.3-80 REMOVABLE UNIT 400×300 80A 3P+N+E 01 35423

RUPM 4.4-80 REMOVABLE UNIT 400×400 80A 3P+N+E 01 35424

RUPM 4.4-250 REMOVABLE UNIT 400×400 250A 3P+N+E 01 35425

22 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

REMOVABLE UNIT MOTOR STARTER

600 WIDE

PLUG-IN INDSATS 600 BREDDE

DIREKTE START

STECKEINSATZ 600 BREITE

FÜR DIREKTSTART

REMOVABLE UNIT MOTOR STARTER

400 WIDE

PLUG-IN INDSATS 400 BREDDE

DIREKTE START

STECKEINSATZ 400 BREITE

FÜR DIREKTSTART

Втычной модуль шириной400 для прямого

пуска двигателей

Втычной модуль шириной600 для прямого

пуска двигателей

See page no.29,30,34,35 for selection of Mounting plates

See page no.31,32,33,36,37 for selection of Mounting plates

23LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPESIZE

W × H × DRATED

CURRENT

POWER CONTACTS ORDER No.RAL 7032

Smooth

ORDER No.RAL 7035

Fine Tex.INCOMING OUTGOING

FWCP 6.1-80 600x100x400 80A 3P+N+E 3P+N 36100 36104

FWCP 6.1-5-80 600x150x400 80A 3P+N+E 3P+N 36110 36114

FWCP 6.2-80 600x200x400 80A 3P+N+E 3P+N 36120 36124

FWCP 6.1-5-160 600x150x400 160A 3P+N+E 3P+N 36130 36134

FWCP 6.2-250 600x200x400 250A 3P+N+E 3P+N 36140 36144

FWCP 6.3-250 600x300x400 250A 3P+N+E 3P+N 36150 36154

FWCP 6.4-400 600x400x400 400A 3P+N+E 3P+N 36160 36164

FWCP 6.4-630 600x400x400 630A 3P+N+E 3P+N 36170 36174

FWCP 6.6-630 600x600x400 630A 3P+N+E 3P+N 36180 36184

TYPESIZE

W × H × DRATED

CURRENT

POWER CONTACTS ORDER No.RAL 7032

Smooth

ORDER No.RAL 7035

Fine Tex.INCOMING OUTGOING

FWCP 4.1-80 400x100x400 80A 3P+N+E 3P+N 36000 36004

FWCP 4.1-5-80 400x150x400 80A 3P+N+E 3P+N 36010 36014

FWCP 4.2-80 400x200x400 80A 3P+N+E 3P+N 36020 36024

FWCP 4.1-5-160 400x150x400 160A 3P+N+E 3P+N 36030 36034

FWCP 4.2-250 400x200x400 250A 3P+N+E 3P+N 36040 36044

FWCP 4.3-250 400x300x400 250A 3P+N+E 3P+N 36050 36054

FWCP 4.4-250 400x400x400 250A 3P+N+E 3P+N 36060 36064

24 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

FULLY WITHDRAWABLE FEEDER

600 WIDE

FULLY WITHDRAWABLEFEEDER

400 WIDE

VOLLEINSCHUB 400

VOLLEINSCHUB 600

Выдвижной модуль для распредельных нагрузок

Выдвижной модуль для распредельных нагрузок

UDTRÆKSBARE SKUFFER

UDTRÆKSBARE SKUFFER

See page no.38,40,42 for selection of Mounting plates

See page no.39,41,43 for selection of Mounting plates

25LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPESIZE

W × H × D

POWER CONTACTS CONTROL CONTACTSORDER No.

RAL 7032

Smooth

ORDER No.RAL 7035

Fine Tex.CURRENT

RATINGINCOMING OUTGOING

TERMINALNUMBER

CURRENTRATING

NO. OFCONTACTS

TERMINALNUMBER

FWCPD 6.1-20 600x100x400 20 3P+N+E 3P 10 to 12 10A 14 13 to 26 36300 36304

FWCPD 6.1-80 600x100x400 80 3P+N+E 4P 1 to 4 10A 17 10 to 26 36310 36314

FWCPD 6.1-5-80 600x150x400 80 3P+N+E 4P 1 to 4 10A 17 10 to 26 36320 36324

FWCPD 6.2-250 600x200x400 250 3P+N+E 4P 10A 17 10 to 26 36330 36334

FWCPD 6.3-250 600x300x400 250 3P+N+E 4P 10A 17 10 to 26 36340 36344

FWCPD 6.4-250 600x400x400 250 3P+N+E 4P 10A 17 10 to 26 36350 36354

FWCPD 6.6-400 600x600x400 400 3P+N+E 4P 10A 17 10 to 26 36360 36364

TYPESIZE

W × H × D

POWER CONTACTS CONTROL CONTACTSORDER No.

RAL 7032

Smooth

ORDER No.RAL 7035

Fine Tex.CURRENT

RATINGINCOMING OUTGOING

TERMINALNUMBER

CURRENTRATING

NO. OFCONTACTS

TERMINALNUMBER

FWCPD 4.1-20 400x100x400 20 3P+N+E 3P 10 to 12 10A 14 13 to 26 36200 36204

FWCPD 4.1-80 400x100x400 80 3P+N+E 4P 1 to 4 10A 17 10 to 26 36210 36214

FWCPD 4.1-5-80 400x150x400 80 3P+N+E 4P 1 to 4 10A 17 10 to 26 36220 36224

FWCPD 4.2-80 400x200x400 80 3P+N+E 4P 1 to 4 10A 17 10 to 26 36230 36234

FWCPD 4.3-250 400x300x400 250 3P+N+E 4P 10A 17 10 to 26 36240 36244

FWCPD 4.4-250 400x400x400 250 3P+N+E 4P 10A 17 10 to 26 36250 36254

26 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

FULLY WITHDRAWABLE DOL MOTOR STARTER

600 WIDE

FULLY WITHDRAWABLE DOL MOTOR STARTER

400 WIDE

VOLLEINSCHUB 400 DIREKTSTART

VOLLEINSCHUB 600DIREKTSTART

Выдвижной модуль для прямого пуска двигателей

Выдвижной модуль для прямого пуска двигателей

UDTRÆKSBARE SKUFFERDIREKTE START

UDTRÆKSBARE SKUFFERDIREKTE START

See page no.44 for selection of Mounting plates

See page no.45,46,47,48,49 for selection of Mounting plates

27LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPESIZE

W × H × D

POWER CONTACTS CONTROL CONTACTSORDER No.

RAL 7032

Smooth

ORDER No.RAL 7035

Fine Tex.CURRENT

RATINGINCOMING OUTGOING

TERMINALNUMBER

CURRENTRATING

NO. OFCONTACTS

TERMINALNUMBER

FWCPS 6.1-20 600x100x400 20 3P+N+E 6P 10 to 15 10A 11 16 to 26 36500 36504

FWCPS 6.1-5-20 600x150x400 20 3P+N+E 6P 10 to 15 10A 11 16 to 26 36510 36514

FWCPS 6.2-80 600x200x400 80 3P+N+E 8P1 to 4

1 to 410A 17 10 to 26 36520 36524

FWCPS 6.3-80 600x300x400 80 3P+N+E 8P1 to 4

1 to 410A 17 10 to 26 36530 36534

FWCPS 6.4-250 600x400x400 250 3P+N+E 4P 10A 17 10 to 26 36540 36544

FWCPS 6.6-250 600x600x400 250 3P+N+E 4P 10A 17 10 to 26 36550 36554

TYPESIZE

W × H × D

POWER CONTACTS CONTROL CONTACTSORDER No.

RAL 7032

Smooth

ORDER No.RAL 7035

Fine Tex.CURRENT

RATINGINCOMING OUTGOING

TERMINALNUMBER

CURRENTRATING

NO. OFCONTACTS

TERMINALNUMBER

FWCPS 4.2-20 400x200x400 20 3P+N+E 6P 10 to 15 10A 11 16 to 26 36400 36404

FWCPS 4.3-80 400x300x400 80 3P+N+E 8P1 to 4

1 to 410A 17 10 to 26 36410 36414

FWCPS 4.4-80 400x400x400 80 3P+N+E 8P1 to 4

1 to 410A 17 10 to 26 36420 36424

28 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

FULLY WITHDRAWABLE STAR DELTA MOTOR STARTER

400 WIDE

FULLY WITHDRAWABLE STAR DELTA MOTOR STARTER

600 WIDE

VOLLEINSCHUB 400 STERNDREIECK

VOLLEINSCHUB 600 STERNDREIECK

Выдвижной модуль дляпуска двигателей по схеме

«Звезда-Треугольник»

Выдвижной модуль дляпуска двигателей по схеме

«Звезда-Треугольник»

UDTRÆKSBARE SKUFFERSTJERNE TREKANT

UDTRÆKSBARE SKUFFERSTJERNE TREKANT

See page no.50 for selection of Mounting plates

29LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

zTYPE

RATED CURRENT (A)

TEMP.RISE( T)

WATT LOSS (W)

CUT-OFF CURRENT(kA)

L1 ORDER No.

FBM8M8 160-175 160 70 3.50 63 175 21790

FBM8M8 160-225 160 70 4.50 63 225 21791

FBM8M8 160-275 160 70 5.50 63 275 21793

FBM8M8 160-325 160 70 6.25 63 325 21794

FBM8M8 160-375 160 70 7.25 63 375 21795

FBM8M8 160-425 160 70 8.25 63 425 21797

FBM8M8 160-475 160 70 9.25 63 475 21798

FBM8M8 160-525 160 70 10.25 63 525 21799

FBM8M8 160-575 160 70 11.25 63 575 21801

FBM8M8 160-625 160 70 12.25 63 625 21802

- TYPERATED CURRENT

(A)TEMP.RISE

( T)WATT LOSS

(W)CUT-OFF CURRENT

(kA)L1 ORDER No.

FBM8R 160-175 160 70 3.50 50 175 21750

FBM8R 160-225 160 70 4.50 50 225 21751

FBM8R 160-275 160 70 5.50 50 275 21753

FBM8R 160-325 160 70 6.25 50 325 21754

FBM8R 160-375 160 70 7.25 50 375 21755

FBM8R 160-425 160 70 8.25 50 425 21757

FBM8R 160-475 160 70 9.25 50 475 21758

FBM8R 160-525 160 70 10.25 50 525 21759

FBM8R 160-575 160 70 11.25 50 575 21761

FBM8R 160-625 160 70 12.25 50 625 21762

BRAIDED Cu FLEXI - BAR UP TO 160A

FLEXBÄNDER Cu GEFLOCHTEN

FLEXIBLE SKINNER

Медная плетеная гибкаяшина в изоляции на ток 160А

TYPERATED CURRENT

(A)TEMP.RISE

( T)WATT LOSS

(W)CUT-OFF CURRENT

(kA)L1 ORDER No.

FBM8M6 160-175 160 70 3.50 63 175 21640

FBM8M6 160-225 160 70 4.50 63 225 21641

FBM8M6 160-275 160 70 5.50 63 275 21643

FBM8M6 160-325 160 70 6.25 63 325 21644

FBM8M6 160-375 160 70 7.25 63 375 21645

FBM8M6 160-425 160 70 8.25 63 425 21647

FBM8M6 160-475 160 70 9.25 63 475 21648

FBM8M6 160-525 160 70 10.25 63 525 21649

FBM8M6 160-575 160 70 11.25 63 575 21651

FBM8M6 160-625 160 70 12.25 63 625 21652

2: ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

BRAIDED Cu FLEXI - BARUP TO 160A

FLEXBÄNDER Cu GEFLOCHTEN

FLEXIBLE SKINNER

Медная плетеная гибкаяшина в изоляции на ток 160А

BRAIDED Cu FLEXI - BARUP TO 160A

FLEXBÄNDER Cu GEFLOCHTEN

FLEXIBLE SKINNER

Медная плетеная гибкаяшина в изоляции на ток 160А

31LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

TYPERATED CURRENT

(A)TEMP.RISE

( T)WATT LOSS

(W)CUT-OFF CURRENT

(kA)L1 ORDER No.

FB 630-175 535 80 5.00 65 175 21085

FB 630-225 535 80 6.25 65 225 21092

FB 630-275 535 80 7.75 65 275 21093

FB 630-325 535 80 9.25 65 325 21087

FB 630-375 535 80 10.50 65 375 21094

FB 630-425 535 80 12.00 65 425 21095

FB 630-475 535 80 13.50 65 475 21089

FB 630-525 535 80 14.75 65 525 21096

FB 630-575 535 80 16.25 65 575 21097

FB 630-625 535 80 17.50 65 625 21091

TYPERATED CURRENT

(A)TEMP.RISE

( T)WATT LOSS

(W)CUT-OFF CURRENT

(kA)L1 ORDER No.

FB 400-175 400 70 5.75 65 175 21710

FB 400-225 400 70 7.50 65 225 21711

FB 400-275 400 70 9.25 65 275 21713

FB 400-325 400 70 10.75 65 325 21714

FB 400-375 400 70 12.50 65 375 21715

FB 400-425 400 70 14.25 65 425 21717

FB 400-475 400 70 15.75 65 475 21718

FB 400-525 400 70 17.50 65 525 21719

FB 400-575 400 70 19.25 65 575 21721

FB 400-625 400 70 20.75 65 625 21723

TYPERATED CURRENT

(A)TEMP.RISE

( T)WATT LOSS

(W)CUT-OFF CURRENT

(kA)L1 ORDER No.

FBM8M8 250-175 250 70 4.25 65 175 21695

FBM8M8 250-225 250 70 5.50 65 225 21696

FBM8M8 250-275 250 70 6.50 65 275 21698

FBM8M8 250-325 250 70 7.75 65 325 21699

FBM8M8 250-375 250 70 9.00 65 375 21700

FBM8M8 250-425 250 70 10.25 65 425 21702

FBM8M8 250-475 250 70 11.25 65 475 21703

FBM8M8 250-525 250 70 12.50 65 525 21704

FBM8M8 250-575 250 70 13.75 65 575 21706

FBM8M8 250-625 250 70 15.00 65 625 21707

BRAIDED Cu FLEXI - BAR250A

FLEXBÄNDER Cu GEFLOCHTEN

FLEXIBLE SKINNER

Медная плетеная гибкаяшина в изоляции на ток 250А

32 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

ORDER INFORMATION

BRAIDED Cu FLEXI - BAR400A

FLEXBÄNDER Cu GEFLOCHTEN

FLEXIBLE SKINNER

Медная плетеная гибкаяшина в изоляции на ток 400А

BRAIDED Cu FLEXI - BAR535A

FLEXBÄNDER Cu GEFLOCHTEN

FLEXIBLE SKINNER

Медная плетеная гибкаяшина в изоляции на ток 535А

33LATEST VERSION AVAILABLE AT www.elsteel.com

INSTRUCTIONS

34 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT 3P FEEDER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

35LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

REMOVABLE UNIT 3P FEEDER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

36 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT 4P FEEDER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

37LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

REMOVABLE UNIT 4P FEEDER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

38 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT 3P + N LINK FEEDER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

39LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

REMOVABLE UNIT 3P + N LINK FEEDER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

3: ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT DOL MOTORSTARTER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

41LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

REMOVABLE UNIT DOL MOTORSTARTER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

42 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT DOL MOTORSTARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

43LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

REMOVABLE UNIT DOL MOTORSTARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

44 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT DOL MOTORSTARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

45LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

REMOVABLE UNIT STAR DELTA MOTORSTARTER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

46 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT STAR DELTA MOTORSTARTER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

47LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

REMOVABLE UNIT STAR DELTA MOTORSTARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

48 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

REMOVABLE UNIT STAR DELTA MOTORSTARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

49LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

WITHDRAWABLE UNIT 3P FEEDER 400 WIDE

4: ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT 3P FEEDER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

51LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

WITHDRAWABLE UNIT 4P FEEDER 400 WIDE

52 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT 4P FEEDER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

WITHDRAWABLE UNIT 3P +N LINK FEEDER 400 WIDE

53LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

54 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT 3P +N LINK FEEDER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

WITHDRAWABLE UNIT DOL MOTOR STARTER 400 WIDE

55LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

56 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT DOL MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

57LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

WITHDRAWABLE UNIT DOL MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

58 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT DOL MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

59LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

WITHDRAWABLE UNIT DOL MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

5: ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT DOL MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

61LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

WITHDRAWABLE UNIT STAR DELTA MOTOR STARTER 400 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

62 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT STAR DELTA MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

63LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

WITHDRAWABLE UNIT STAR DELTA MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

64 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT STAR DELTA MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

65LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

WITHDRAWABLE UNIT STAR DELTA MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

66 ISSUED BY: N. R DATE: 01.04.2013 APPROVED BY: N. F DATE: 01.04.2013

SELECTION GUIDE

WITHDRAWABLE UNIT STAR DELTA MOTOR STARTER 600 WIDE

This page only serves as a guide to choose the right size.

Mounting plates are supplied without holes.

67LATEST VERSION AVAILABLE AT www.elsteel.com

SELECTION GUIDE

EUROPEElsteel UK - EnglandTel: ++44 197 885 5909Fax: ++44 197 885 5824Mail: sales@elsteel.co.uk

Elsteel Ltd. - PolandTel: ++48 77 465 4666Fax: ++48 77 465 4674Mail: elsteel@elsteel.pl

Elsteel Ltd. - IrelandTel: ++44 289 077 4041Fax: ++44 289 078 3197Mail: ghavlin@parkelect.co.uk

Envolventes Elsteel - SpainTel: ++34 95 567 5988Fax: ++34 95 567 5987Mail: josemanuel@cenazarenos.com

EFA Elektro AS - NorwayTel: ++47 6 681 2400Fax: ++47 6 680 0478Mail: geir.sogn@efa.no

RS Components Ltd. - EnglandTel: ++44 1536 20 1234Fax: ++44 1536 20 1501Web: www.rswww.com

TMS GmbH - GermanyTel: ++49 4554 705 6500Fax: ++49 4554 705 6503Mail: info@technomodul.de

Kulik Telecom B. V. - NetherlandsTel: ++31 182 61 8777Fax: ++31 182 61 6064Mail: info@kulik.nl

Rafmidlun hf - IcelandTel: ++354 540 3500Fax: ++354 540 3501Mail: kolbeinn@rafmidlun.is

N. N. Control Panels Ltd. - CyprusTel: ++357 25 71 4816Fax: ++357 25 71 4415Mail: info@nncontrolpanels.com

Culic Elektro Centar - CroatiaTel: ++38 5 2120 4333Fax: ++38 5 2120 4343Mail: niksa@culicec.hr

Elektra-Bree-Bordenbouw nv - BelgiumTel: ++32 8941 0041Fax: ++32 8941 0049Mail: koen.geebelen@ebbordenbouw.be

Alewijnse Panelenbouw B.V- NetherlandsTel: ++31 243 716 511Fax: ++31 243 716 510Mail: e.borren@alewijnse.nl

Montakon - Netherlands (Box Items)Tel: ++31 73 599 6000Fax: ++31 73 599 6060Mail: michiel.janssen@montakon.nl

SKS Automaatio Oy - FinlandTel: ++358 20 764 61Fax: ++358 20 764 6820Mail: automaatio@sks.fi

EUROPE - Contd.Cebco Limited - Czech RepublicTel: ++420 604 645 648Mail: info@cebco.czMail: cebco@seznam.cz

UAB Electric Box - LithuaniaTel: ++370 45 580 242Fax: ++370 45 580 242Mail: saulius@electricbox.lt

NORTH AMERICAWestshore Controls - CanadaTel: ++1 604 817 0987Fax: ++1 604 943 1661Mail: westshorecontrols@gmail.com

AUSTRALIAIPD Group Ltd. - Australia & New ZealandTel: ++61 2 9645 0777Fax: ++61 2 9645 1608Mail: brian.rodricks@ipdgroup.com.au

MIDDLE EASTVoltamp Energy SAOG - OmanTel: ++968 2 444 9140Fax: ++968 2 444 6584Mail: pronab@voltampoman.com

Sharikah Fanniyah Omaniyah Ltd. - OmanTel: ++968 2 481 5970Fax: ++968 2 481 0706Mail: sfoelect@omantel.net.om

National Electrical Industries Co. LLC. - OmanTel: ++968 2 445 4028Fax: ++968 2 445 3721Mail: sudarsan@neioman.com

International Electrical Ind. Co. LLC. - OmanTel: ++968 2 444 7053Fax: ++968 2 444 7054Mail: sharma@iei-me.com

Bloudan Control Systems Industry - DubaiTel: ++971 4 339 0499Fax: ++971 4 339 1553Mail: arun@bcsdubai.com

Power & Control Fzco - DubaiTel: ++971 4 883 0391Fax: ++971 4 883 0392Mail: rami@pnc-ae.com

Elsteel Middle East L.L.C - DubaiTel: ++971 555 570046Fax: ++971 433 93528Mail: arun@elsteelme.com

Harb Electric - LebanonTel: ++961 1 821 625Fax: ++961 1 821 626Mail: mazen_harb@harbelectric.com

Saudi United for Mech. Elec. - Saudi ArabiaTel: ++966 1 265 2953Fax: ++966 1 265 2443Mail: syed-muneer@eco.com.sa

Jawad Electric Switchgear Mfg. - Jordan Tel: ++962 6 488 5617Fax: ++962 6 489 1481Mail: b_hindi@jawadswitchgear.com

Schneider Electrical Engineering Ltd - IsraelTel: ++972 4 609 4433Fax: ++972 4 649 2216Mail: oded@sche.co.il

MIDDLE EAST - Contd.PAC International - QatarTel: ++974 6699 6445Fax: ++974 4469 0364Mail: mazen_harb@harbelectric.com

KG Switchgear - QatarTel: ++974 4416 5836Fax: ++974 4416 5837Mail: kumar@kgswitchgear.com

Zaki El-Sewedy Group - EgyptTel: ++202 334 43762Fax: ++202 330 33960Mail: hesham.saleh@elsewedy.net

Pacific Ocean Elect. Switchgear Ind. - SharjahTel: ++971 653 45334Fax: ++971 653 47212Mail: henry@pacificocean.ae

ASIAElsteel Ltd. - Sri LankaTel: ++94 11 225 2485Fax: ++94 11 225 2698Mail: elsteel@elsteel.com

Elsteel Modular Products (Pvt) Ltd. - IndiaTel: ++91 832 661 1111Fax: ++91 832 661 1112Mail: elsteel@elsteel.in

Elsteel Techno - Singapore & MalaysiaTel: ++65 645 546 98Fax: ++65 645 591 31Mail: elsteel@singnet.com.sg

Norr Systems Pte Ltd. - SingaporeTel: ++65 678 505 00Fax: ++65 678 506 00Mail: raman@norrsystems.com

Swift Energy - MalaysiaTel: ++60 196 681 02Fax: ++60 162 102 030Mail: bctan@senergy.com.my

Fudo Automation Systems - Hydrabad, IndiaTel: ++91 40 2004 0814Fax: ++91 40 2754 4075Mail: fudo@rediffmail.com

Prakticheskaya Electrotekhnica - KazakhstanTel: ++7 727 3783 294Fax: ++7 727 3783 487Mail: ovetlugin@mail.ru

AFRICAElsteel Ltd. - South AfricaTel: ++27 11 383 8300Fax: ++27 11 824 1353Mail: sales@atisystems.co.za

M & E Commercial Engineers Ltd.- MauritiusTel: ++230 670 5201Fax: ++230 670 5200Mail: mec.eng@intnet.mu

Specialised Power Systems Ltd. - KenyaTel: ++254 20 207 7219Fax: ++254 20 353 2986Mail: specialised@wananchi.com

CISJSC Electronmash - RussiaTel: ++781 2 320 1262Fax: ++781 2 320 1262Mail: alexeev@electronmash.ru

www.elsteel.com

FMTUFFM!Efonbsl!�!Fabriksvej 23 · 3000 Helsingor

Tel +45 49 22 33 44 · Fax +45 49 22 33 45

elsteel@elsteel.dk · xxx/fmtuffm/dpn

DISTRIBUTORS

VERSION 1