Carrying potable water & edible fluids
Transportation of chemicals & fluids
Solar, Central & Radiant floor heating Applications
Suitable for both hot & cold water
Plumbing System
Apollo Pipes Ltd., Email: [email protected] | Web: www.apollopipes.com
1800-121-3737 | 011-43334000
Products: CPVC PIPES & FITTINGS | uPVC PLUMBING SYSTEM | PRESSURE PIPES & FITTINGS | SWR DRAINAGE SYSTEM | COLUMN PIPES | WELL CASING PIPES | HDPE PIPES | SPRINKLER SYSTEM
APOLLO PIPES LTD. is the key group company of Sudesh Group. The company has an enriching experience of decades in manufacturing pipes and related products for all purposes. With a manufacturing plant having 20 extrusion lines and producing 60,000 tonnes of polymers annually, APOLLO PIPES LTD. has the largest manufacturing unit at a single location under one roof in North India. APOLLO PIPES LTD. business activities are focused on development, manufacturing and distribution of Plastic Piping Systems under the brand name of APL APOLLO.
APOLLO PIPES have plants located at Dadri, Sikandrabad (Uttar Pradesh) and Ahmedabad (Gujarat). The plants use flexible manufacturing techniques, greener technologies and modern machinery. We strictly follow the national and international standards while manufacturing all kinds of CPVC Pipes and Fittings, uPVC Plumbing System, uPVC SWR Piping Systems, uPVC Pressure Pipes and Fittings, Elastomeric (Ring Fit Pipes), Column Pipes, uPVC Well Casing Pipes, HDPE Pipes, Sprinkler System and Cable Ducts.
Largest manufacturing unit at a single location
under one roof in North India
Manufactures pipes and related products
for civil infrastructure, industrial and
agriculture purposes
Key group company of the Sudesh Group;
headquartered in New Delhi
Manufacturing plants have 20 extrusion lines
producing 60,000 tonnes polymers annually
Strong reputation for the high quality products and strong distribution network
Among the market leaders in piping
and related products segment
More than a decade of being amongst
the leaders
About Apollo Pipes
uPVC Plumbing SystemAPL Apollo uPVC Pipes being lead-free are non-toxic and hence, favoured for use in applications such as potable water pipes, specifically formulated for the use. Joining is accomplished quickly and efficiently utilising inexpensive tools thereby greatly reducing labour and installation costs.
ApplicationsAPL Apollo range of uPVC Plumbing Pipes & Fittings can be used for an array of applications, including:
Hot and cold water distribution in residential, commercial and industrial spaces
Carrying portable water and edible fluids
Transportation of chemicals and other hot, corrosive fluids
Solar heating, central heating and radiant floor heating applications
uPVC Plumbing Features and Benefits
Manufactured from quality raw material
World-class machining
Easy handling, transportation and installation
Economical
Excellent chemical resistance
Non-conductive
Longevity of life cycle
Quality water
Manufactured under stringent quality standards
Exceeds in reliability
Low frictional losses
Leak-proof joints
Standard ComplianceTechnical SpecificationDimensions of uPVC Plumbing Pipes confirming to ASTM D–1785
Nominal Bore Outside DiameterWall Thickness
Working PressureMin Max
(In) mm mm mm mpa
½ 21.34 ± 0.10 2.77 3.28 2.07
¾ 26.67 ± 0.10 2.87 3.38 1.65
1 33.40 ± 0.13 3.38 3.89 1.55
1 ¼ 42.16 ± 0.13 3.56 4.07 1.27
1 ½ 48.26 ± 0.15 3.68 4.19 1.14
2 60.32 ± 0.15 3.91 4.42 0.96
2 ½ 73.02 ± 0.18 5.16 5.77 1.03
3 88.90 ± 0.20 5.49 6.15 0.89
4 114.3 ± 0.23 6.02 6.73 0.76
Nominal Bore Outside DiameterWall Thickness
Working PressureMin Max
(In) mm mm mm mpa
½ 21.34 ± 0.10 3.73 4.24 2.90
¾ 26.67 ± 0.10 3.91 4.42 2.34
1 33.40 ± 0.13 4.55 5.08 2.21
1 ¼ 42.16 ± 0.13 4.85 5.43 1.79
1 ½ 48.26 ± 0.15 5.08 5.69 1.65
2 60.32 ± 0.15 5.54 6.20 1.38
2 ½ 73.02 ± 0.18 7.01 7.85 1.45
3 88.90 ± 0.20 7.62 8.53 1.31
4 114.3 ± 0.23 8.56 9.58 1.10
Sche
dule
40
Sche
dule
80
Nominal Bore Outside DiameterWall Thickness
Working PressureMin Max
(In) mm mm mm mpa
½ 21.34 ± 0.10 4.32 4.83 3.52
¾ 26.67 ± 0.10 4.32 4.83 2.69
1 33.40 ± 0.13 5.08 5.69 2.48
1 ¼ 42.16 ± 0.13 5.46 6.12 2.07
1 ½ 48.26 ± 0.15 5.72 6.40 1.86
2 60.32 ± 0.15 6.35 7.11 1.65
2 ½ 73.02 ± 0.18 7.62 8.53 1.59
3 88.90 ± 0.20 8.89 9.96 1.52
4 114.3 ± 0.23 11.10 12.42 1.52
Sche
dule
12
0
COUPLER½” - 2”
REDUCING COUPLER3/4’’X½’’ - 2’’X1 ½’’
TEE½” - 2”
ELBOW 900
½” - 2”
REDUCING TEE3/4’’X1/2’’ - 2” X1 ½”
ELBOW 450½” - 1”
REDUCING ELBOW3/4’’X1/2’’ - 1’’X3/4’’
BALL VALVE½” - 2”
UNION½” - 2”
TANK CONNECTOR½” - 2”
END CAP½” - 2”
REDUCING BUSH3/4’’X1/2’’ - 2’’X1 ½’’
MALE ADAPTOR PLASTIC THREADED
½” -2”
MALE ADAPTOR BRASS THREADED
1/2’’X1/2’’ - 3/4’’X1/2’FEMALE ADAPTOR
PLASTIC THREADED1/2’’ - 2’’
FEMALE ADAPTOR BRASS THREADED
1/2’’X1/2’’ - 3/4’’X1/2’’’
FEMALE ELBOW BRASS THREADED1/2’’ X 1/2’’ -
1’’ X 1/2’’
FEMALE TEE BRASS THREADED
1/2’’ X 1/2’’ - 1’’ X 1/2’’
THREADED COUPLER1 ¼’’
UPVC SOLVENT (BLUE)25 ml Tube - 946 ml Tin
uPVC Fittings in SCH-80 as per ASTM D-2467
MEASURING: In order to make a proper and neat joint, we should measure the Pipe length accurately and make a visible marking using a pen. Ensure that the Pipes & Fittings are compatible.
FITTING PREPARATION: Use a clean dry cloth, wipe the dirt and moisture from the Fittings, sockets and the Pipe. Dry fit the Pipe to ensure total entry into the bottom of the Fittings socket and make a visible marking using a dark pen.
CUTTING: We can cut the Pipe easily with a sharp saw/cutter. Cutting the Pipe as squarely as possible (at 90O) provides optimal bonding area within a joint. Inspect Pipe ends thoroughly prior to making a joint. If a crack
or splintering is noticed, cut off a minimum of 25 mm beyond the visible crack before proceeding
DEBURING/BEVELING: Burrs in and on end can obstruct flow or proper contact between the Pipe and socket of the Fitting during assembly and should be removed from both in and outside of the Pipe.
A slight bevel end of the Pipe will ease entry of the Pipe into the socket of the Fitting socket.
Installation Guide
ASSEMBLY: Immediately after applying the solvent, insert the Pipe into the socket. Rotate the Pipe ½ or ¼ while inserting. This motion ensures an even distribution of cement within the joint. Properly align the Fittings and
leave it for 10-20 seconds to allow the joint set-up.
SOLVENT CEMENT APPLICATION: Use only APL Apollo uPVC Cement to ensure a perfect solvent weld joint. When making a joint, apply an even coat of cement on the Pipe end and also inside the Fitting socket.
Do not use thickened or lumpy solvent cement; it should have a flow consistency like syrup.
Apollo Pipes Ltd., 37, Hargobind Enclave, Vikas Marg, New Delhi - 110092Email: [email protected] | Web: www.apollopipes.com
1800-121-3737011-43334000
CPVC Pipes & Fittings : APL Apollo CPVC Pipes & Fittings (as per ASTM D-1784, ASTM D-2846, ASTM F-439, ASTM F-441, ASTM F-438 & ASTM F-493) is a safe, long lasting and cost-effective solution for hot and cold water. This system is suitable for all plumbing and potable water application.
Pressure Pipes & Fittings : These pipes and fittings are used in variety of applications like irrigation , water supply, industrial process line, swimming pools, fire fightning, etc.
SWR Drainage System : APL Apollo uPVC SWR Piping System (as per IS:14735-99 & IS:13592-92) is an easy & economical product, ideal for drainage of soil waste and rain water application in residential, commercial and Industrial buildings.
Column Pipes : APL Apollo Column Pipes are manufactured for borewell / submersible pumps which offer many advantages like-light weight, high tensile load capacity, leak-proof joints and long life with economy and hence, emerges as the best option for conventional metal pipes.
Well Casing Pipes : APL Apollo uPVC Well Casing Pipes an ideal preference for applications like protection of domestic, irrigation, industrial and mining borewells.
HDPE Pipes : HDPE is strongly resistant to stress cracking and has low creep rupture properties. It has excellent insulation properties over a wide range of frequencies and is not chemically active.
Sprinkler System : APL Apollo Sprinkler System (as per IS:14151) is suitable for almost all field crops like wheat , gram, pulses as well as vegetables, cotton, soya bean, tea, coffee and other fodder crops, Suitable for residential, industrial, hotel, resorts, public & government enterprises, golf links, race courses, etc.
Our Product Range
