+ All Categories
Home > Documents > PM-712 - kimoto-electric.co.jp · PM-712 is designed to measure both fine (PM2.5) and coarse...

PM-712 - kimoto-electric.co.jp · PM-712 is designed to measure both fine (PM2.5) and coarse...

Date post: 05-Oct-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
2
Particulate Matter Monitor PM-712 M-712 is a continuous PM monitor for measuring both PM 2.5 and PM 10 . Black carbon mainly aributed from diesel emissions is also measured, simultaneously. It's notable that SmartCalc function. SmartCalc evaluates PM 2.5 concentrations to ‘reference’ concentrations with high equivalence of FRM from ‘real’ concentra- tions under ambient condition. PM 2.5 /PM 10-2.5 /PM 10 /OBC Dichotomous Monitor Japanese Patent Application No.3574045 Sample Inlet Virtual Impactor Beta source Sampling Spot for Coarse Sampling Spot for Fine OBC Sensor to Suction Pump PTFE Roll Tape Detector Plastic Scintillator P PM-712 is designed to measure both fine (PM 2.5 ) and coarse (PM 10-2.5 ) fractions in PM 10 using a virtual impactor, simultaneously. PM-712 also measures the black carbon mainly attributed from diesel emissions using OBC (optical black carbon) sensor. (Simple PM 2.5 type is selectable by product code PM-712-00.) KIMOTO realized the precise measurement of PM 2.5 with high-equivalence of FRM by the unique function “SmartCalc” born from our rich experiences. Using this function, ‘real’ PM 2.5 concentrations under ambient con- dition are evaluated ‘reference’ concentrations of FRM after aging for 24 hour with 35%RH. PTFE tape filter that has few effects by moisture and gas adsorption. Easy operation by large color LCD touch panel. USB memory is available for data retrieve. Large capacity memory stores measuring data for 1 year. Optional cover tape roll protects sample spots for speciation analysis. 0 0 1.0 2.0 3.0 4.0 5.0 20 40 60 80 100 Aerodynamic diameter (μm) Penetration rate Virtual impactor PM-712 (VI-4) EPA Virtual impactor (Loo and Cork* ) EPA-WINS /2.5um/16.7 Alpm impactor** Very Sharp Cut Cyclone (VSCC, BGI Inc.)*** WINS and VSCC: 16.7 LPM PM-712: 15.4 +1.3 LPM Loo & Cork: 15.0 +1.7 LPM (%) *Loo, B. W. and Cork, C. P., Aerosol Sci. and Tech., 9(3),167, (1988). Comparison virtual-impactor with main PM2.5 separator D50 = 2.45 μm D20/D80 = 2.82 / 1.97 = 1.43 PM-712
Transcript
Page 1: PM-712 - kimoto-electric.co.jp · PM-712 is designed to measure both fine (PM2.5) and coarse (PM10-2.5) fractions in PM10 using a virtual impactor, simultaneously. PM-712 also measures

Particulate Matter MonitorPM-712

M-712 is a continuous PM monitor for measuring both PM2.5 and PM10. Black carbon mainly a�ributed from diesel emissions is also measured, simultaneously. It's notable that SmartCalc function. SmartCalc evaluates PM2.5 concentrations to ‘reference’ concentrations with high equivalence of FRM from ‘real’ concentra-tions under ambient condition.

PM2.5/PM10-2.5/PM10/OBC

Dichotomous Monitor

Japanese Patent Application No.3574045

Sample Inlet

Virtual Impactor

Beta sourceSampling Spot for Coarse

Sampling Spot for FineOBC Sensor

to Suction PumpPTFE Roll Tape

DetectorPlastic Scintillator

P

PM-712 is designed to measure both f ine (PM2.5) and coarse (PM10-2.5) f ract ions in PM10 using a vir tual impactor, s imultaneously. PM-712 also measures the black carbon mainly at t r ibuted from diesel emissions using OBC (opt ical black carbon) sensor. (Simple PM2.5 type is selectable by product code PM-712-00.)

KIMOTO real ized the precise measurement of PM2.5 with high-equivalence of FRM by the unique funct ion “SmartCalc” born from our r ich experiences . Using this funct ion, ‘ real’ PM2.5 concentrat ions under ambient con-di t ion are evaluated ‘reference’ concentrat ions of FRM after aging for 24 hour with 35%RH.

PTFE tape f i l ter that has few effects by moisture and gas adsorpt ion.

Easy operat ion by large color LCD touch panel .

USB memory is avai lable for data re t r ieve.

Large capaci ty memory s tores measuring data for 1 year.

Optional cover tape rol l protects sample spots for speciat ion analysis .

00 1.0 2.0 3.0 4.0 5.0

20

40

60

80

100

Aerodynamic diameter (μm)

Pen

etra

tion

rate

Virtual impactorPM-712 (VI-4)

EPA Virtual impactor(Loo and Cork* )

EPA-WINS /2.5um/16.7 Alpm impactor**

Very Sharp Cut Cyclone(VSCC, BGI Inc.)***

WINS and VSCC: 16.7 LPMPM-712: 15.4 +1.3 LPMLoo & Cork: 15.0 +1.7 LPM

(%)

*Loo, B. W. and Cork, C. P., Aerosol Sci. and Tech., 9(3),167, (1988).

Comparison virtual-impactor with main PM2.5 separator

D50 = 2.45 μmD20/D80 = 2.82 / 1.97 = 1.43

PM-712

Page 2: PM-712 - kimoto-electric.co.jp · PM-712 is designed to measure both fine (PM2.5) and coarse (PM10-2.5) fractions in PM10 using a virtual impactor, simultaneously. PM-712 also measures

KIMOTO ELECTRIC Co., Ltd.3-1 FUNAHASHI-CHO, TENNOJI-KU, OSAKA 543-0024, JAPANPHONE: +81-6-6768-3401 FAX: +81-6-6764-7040Home page: http://www.kimoto-electric.co.jpE-mail: [email protected]

Note) Specifications are subject to change without the notice for the improvement. Printed in Mar. 2020

Measuring object Particulate Matter in the ambient air

Measuring range PM2.5: 0~1000 μg/m3

PM10: 0~5000 μg/m3

OBC: 0~20 μg/m3

Repeatability ± 2 % of equivalence film number

Instrument reading for standard air sample

± 10% of mass concentration

Span drift

day of equivalent film number

± 3%/ day of equivalent film number

Measuring method PM2.5, PM10-2.5 : Beta ray attenuation methodOBC(Optical Black Carbon): Light scattering method

Sample flow rate 16.7 LPM (15.4LPM + 1.3 LPM)

Linearity ± 5 % of equivalence film number

Digital IN/OUT Ethernet, USB1.1, RS232C

Internal data memory Measuring data (1min. data, 1h data), Messages

Withstand voltage test AC1000V 50/ 60Hz for 1min.

LCD display Measuring data, Output range, Alarm, Performance and Control information

Sampling inlet Inlet: USEPA PM10 InletSeparator: PM2.5 Virtual Impactor

Analog output for telemeter(Optional)

DC 0~1V: 1h value (as provisional): 0 - 500 / 1000/2000/ 5000 μg/m3 4 ranges auto/manual switching *Starting range is selectable. *Fixed range is also available.Contact signals: Output range, Adjustment, Power off, Failure alarm etc.

Zero drift ± 5.0 μg/m3 /day

Flow control Volumetric flow control

Stability for fluctuation in voltage for conc. Stability for fluctuation in voltage for flow

±3%/100±10V of equivalence film number

± 5%/100±10V for sampling flow rate

Filter media PTFE tape roll

Detector Plastic scintillation detector

Power requirement AC 100 V, 50/60 Hz, approx. 450 VA

Insulation resistance More than 5 M OHM

Beta ray source 14C, less than 10 MBq

*For further information, please contact us.

Standard Specifications

Flow Diagram

Size (Desktop type and rack case type)

Product Code (please select to order)

C

0

00

PM10 Simultaneous measurement

No use

OBC measurementNo use

Analog telemeter communication unit

No use

T

B

P M - 7 1 2 -

T1A1

Desktop typeRack case typeOutdoor case typeS1

0Serial recorderNo use

R

Desktop type (weight : approx. 15kg)

Rack case type (weight : approx. 40kg)

Outdoor case type (weight : approx. 80kg)

485

230

490

590

Inletand

Temp./RH sensor875

485

Sample air

Pressure Sensor

OBCSensor(Option)

Valve for head lifting

PM2.5

Beta source/Sampling Head

P

Pressure sensor for outdoor

P

OBC

Temp./RHSensor T,H

Temp/RH sensor for outdoor

T,H

Flow Controller 1

F

Flow Sensor 1

Flow Controller 2

F

FlowSensor 2

Detector1

VirtualImpactor

Pump

PTFE FilterPM10-2.5

(Unit: mm)

Detector2(Option)

1080±5

160


Recommended