Page 1 of 2
KWP.001
•
•
•
•
The KWP Series of wire potentiometers are designed to withstand the harsh environments within motorsport and on-vehicle automotive testing applications.
By using a retractable polyamide coated stainless steel wire, the KWP offers high performance and reliability at temperatures up to +180°F. Alternatively, it is capable of operational excellence in cold environments down to –5°F.
The design allows for various mounting options for the sensor and comes supplied with a cable output as standard.
Typical applications include: pedal travel, steering angle and suspension travel.
PMC/KA Sensors adopts a continuous development program which sometimes necessitates specification changes without notice
• " "
•
•
•
•
Range (Inches) 2 6 10 20 30 40 50
Linearity (±%) 0.5 0.25 0.25 0.25 0.25 0.25 0.25
Resolution (inches) 0.004 0.004 0.004 0.006 0.008 0.012 0.016
Resistance (kΩ) 1.0 ±10%
Supply Voltage Maximum of 32Vdc at 1kΩ / 1W Max
Temperature Range -5°F to +180°F (-20°C to +80°C)
Temperature Coefficient ±0.0015 % FSO/°F
Construction Draw Wire: Polyamide Coated Stainless Steel
Draw Wire Acceleration Approximately 10G
Draw Wire Retraction Force Approximately 0.25lbsf (1N)
Draw Wire Extension Force Approximately 0.55lbsf (2.5N) 0.35lbsf 0.35lbsf
Protection Class IP20 or IP60 with Cable and Boot Fitted
Electrical Connection Solder Tags or 40", 55spec, 26AWG Cable + DR25 Sleeve
Options Cable, Connector Fitted, Labelling or Solder Tags
Page 2 of 2
KWP.001
The KA configuration tool is used to specify a standard KA Sensor, other options are available.
+Ve Supply 0V Supply Signal
Red Black White
•
•
•
•
•
•
•
•
0.93
" (K
WP
50-7
50)
1.
55"
(KW
P 1
000
-12
50)
Ø 0.11"(3PLCS)
Dimensions in inches
•
•
•
•
- - - -Range (Stroke) 2 inch A02
6 inch A06
10 inch A10
20 inch A20
30 inch A30
40 inch A40
50 inch A50
Electrical Connection 55spec, 26 AWG Cable + DR25 Sleeve C
Solder Tab S
Cable Length N/A 000
40 inches A40
Special Code None 000
KWP
Cable Direction
1.18
" (K
WP
50-7
50)
1.
81"
(KW
P 1
000
-12
50)
1.18" (KWP50-750) 1.81" (KWP 1000-1250)
0.93" (KWP50-750) 1.55" (KWP 1000-1250)
0.59" 0.47"
0.55
"
26AWG 55spec Cable DR25 Sleeve
Ø1.06"
0.83
"
Ø 0.12"
0.08
"
0.47
"
1.85
"