+ All Categories
Home > Documents > Pneumatic Sample Conveying System - Gamet … · Pneumatic Sample Conveying SystemPneumatic Sample...

Pneumatic Sample Conveying System - Gamet … · Pneumatic Sample Conveying SystemPneumatic Sample...

Date post: 11-Apr-2018
Category:
Upload: vunguyet
View: 263 times
Download: 1 times
Share this document with a friend
2
Our DS-2 and DS-3 systems are designed to handle grain samples in the gentlest manner while providing sampling results in a timely manner. Properly installed, these systems are suitable for use with sample conveying lines of up to 800 feet. Today’s sampling solutions require flexibility. Our pneumatic sample conveying systems provide for multiple options when considering where to place your sample inspection office. Because these units are used to convey product both horizontally and vertically, you can provide a safe environment for sample grading personnel. Pneumatically convey samples up to 800 feet. 2” and 3” conveying line systems available. Modular frame allows the pump and airlock / cyclone sections to be split. Sutorbilt ® Legend ® series rotary blowers. Separate drives supplied for pump and airlock. Variable frequency pump drives available. System can also be used to return excess sample. DS-2 & DS-3 Systems DS-2 & DS-3 Systems Pneumatic Sample Conveying System Pneumatic Sample Conveying System GAMET MANUFACTURING, INC. 7400 Boone Avenue North Brooklyn Park, MN USA 55428 [email protected] www.gametmfg.com Toll Free 888-647-5475
Transcript
Page 1: Pneumatic Sample Conveying System - Gamet … · Pneumatic Sample Conveying SystemPneumatic Sample Conveying System DS2 Specifications Conveying Line Size: 2” Diameter Pump Drive

Our DS-2 and DS-3 systems aredesigned to handle grain samples inthe gentlest manner while providingsampling results in a timely manner.Properly installed, these systems are suitable for use with sample conveying lines of up to 800 feet.

Today’s sampling solutions require flexibility.Our pneumatic sample conveying systemsprovide for multiple options when considering where to place your sampleinspection office. Because these units areused to convey product both horizontally andvertically, you can provide a safe environmentfor sample grading personnel.

� Pneumatically convey samples up to 800 feet.

� 2” and 3” conveying line systemsavailable.

� Modular frame allows the pump andairlock/cyclone sections to be split.

� Sutorbilt® Legend® series rotary blowers.

� Separate drives supplied for pump and airlock.

� Variable frequency pump drives available.

� System can also be used to return excesssample.

DS-2 & DS-3 SystemsDS-2 & DS-3 Systems

Pneumatic SampleConveying SystemPneumatic SampleConveying System

GAMET MANUFACTURING, INC.7400 Boone Avenue North • Brooklyn Park, MN USA 55428

[email protected] • www.gametmfg.comToll Free 888-647-5475

Page 2: Pneumatic Sample Conveying System - Gamet … · Pneumatic Sample Conveying SystemPneumatic Sample Conveying System DS2 Specifications Conveying Line Size: 2” Diameter Pump Drive

Pneumatic Sample Conveying SystemPneumatic Sample Conveying System

DS2 Specifications

� Conveying Line Size: 2” Diameter

� Pump Drive Motor: 3 HP

� Airlock Drive Motor: 1/2 HP

� Power Requirements: 3/60/230 - 460 - 575

� TEFC and Class II, Group G

� System Discharge: 3” Diameter

� Primary Use: Conveying samples thathave been divided to the testing lab.

DS3 Specifications

� Conveying Line Size: 3” Diameter

� Pump Drive Motor: 5 HP

� Airlock Drive Motor: 1/2 HP

� Power Requirements: 3/60/230 - 460 - 575

� TEFC and Class II, Group G

� System Discharge: 3” Diameter

� Primary Use: Conveying samplesprior to dividing from the primarysampler to a divider.

Provided for use with both 2” and 3” conveyinglines, these systems allow for sample conveying of both a divided sample and a complete sample, and for flow rates of up to80,000 bushels per hour.

The 2” conveying line is ideal for conveying finished samples that are ready for analysis.The 3” system can convey all of the collectedsample, elevating it to a point that it can bedivided with the excess sample dropping backinto the product stream. This allows the finished sample to then drop by gravity to the collection point.

Additionally, both sizes can be used as grainreturn systems to help keep the inspection area neat and functional.

GAMET MANUFACTURING, INC.7400 Boone Avenue North • Brooklyn Park, MN USA 55428

[email protected] • www.gametmfg.comToll Free 888-647-5475


Recommended