Pneumatic Tyred Rollers -...

Pneumatic Tyred RollersCP224 / CP224W / CP274

One for every need The new rollers are available in three versions with compaction widths from 1800 to 2300 mm / 71 to 91 inches and a maximum operation mass of up to 27,000 kgs / 59,500 lbs. They are ideally suited for a wide range of high-quality applications. In addition, the fully hydraulic propulsion system increases reliability and reduces maintenance costs. Modern modular modelsAs with all Dynapac rollers, these new models are built on a modular concept, which simplifies service and repair procedures substantially. Since the modular concept includes the use of shared components for several models, stock-keeping of spare parts is easier to manage, enabling quicker service to end-users.

Pure perfectionA perfect end result is dependant on the performance of the roller and on the skills of the operator. In a Dynapac, the operator can take advantage of a highly ergonomic and user-friendly operator environment. The spacious asymmetrical cab can be equipped with air conditioning or ACC.

The operator unit with rotating and sliding seat and steering module provide outstanding visibility. The visual display panel shows all relevant information clearly and simply. With the optional temperature sensor and unique Dynapac DCA-A compaction analyzer, the work progress is fully monitored. In fact, you even have the option to adjust tyre pressures whilst compacting.

◄ ◄

The Dynapac Touch

Dynapac presents a series of pneumatic tyred rollers. These machines incorporate several new features that will enhance efficiency, serviceability, operator comfort and the end result. The unique cab design offers an outstanding workplace for the operator, and the dual-circuit braking system is another Dynapac-only feature.

With genuine Dynapac performance you can add the final touch to any project. The progressive design and striking Dynapac color scheme makes it clear to eve-ryone that you have chosen the right machine for the job.

◄

The CP224 and CP274 are not just excellent choices for finishing and sealing. Soil compaction is also carried out to perfection.

◄

2

Take the guesswork out of compaction

Compaction analysis

Temperature- first and last pass

Number of passes at each position inside and outside the temperature range

Playback of the rolling pattern

Full statistics

Print to paper or export to PDF

Compaction Documentation

Number of passes

Surface temperature (core temperarure)

Graphic display of the temperature and the number of passes

Background material for the quality analysis

Support for continuous improvements of the paving process, rolling patterns and overall compaction results

The pass-count and asphalt temperature are presented in real-time on the operator screen - providing vital information for a successful compaction job.Compaction is precision work. In order to reach the right density and obtain the right

surface texture, a series of parameters must be monitored. By using the Dynapac DCA-A compaction analyzer this delicate task becomes a lot easier. Graphic, real-time display of temperature and number of passes, plus the support of GPS positioning, help you in making every job world class.

Furthermore, DCA-A provides full statistics, documentation and thorough data for quality analysis. The rolling pattern can be played back and all results printed on paper or to a PDF file. It is easily understandable how these benefits improve quality and clients’ trust in your capabilities. Dynapac’s DCA-A analysis tool takes the guesswork out of compaction.

A system that helps you do a perfect job

Dynapac Compaction Analyzer for static compaction◄

◄

Pressure contact area overlap The previously compacted areas support the soil being compacted and help achieve a better and more homogeneous compaction.

◄

◄

3

PerformanceA pneumatic tyred roller is a specialized machine – with a wide range of applications. Finishing and sealing are obvious ones but soil compaction can also be carried out with top quality. A significant feature is the smooth start-stop procedure when changing driving direction. The wide base tyres, air-on-the-run option and back-up sprinkler further enhance the end result quality.

Never settle for second best

SafetyThe braking system has two separate circuits which are able to maintain full braking capacity even if a damaged hose or other failure should disable one of the circuits.

Visibility and manoeuvrability are safety corner-stones. Dynapac’s cab design, as well as the 4-post ROPS, minimizes obstruction of the operator’s field of view. Also, precise steering and the powerful braking system keep the operator in control.

ErgonomicsIn a Dynapac, the seat, steering wheel, dashboard and controls are built as an integrated unit, easily adjusted to personal preferences. The entire operator unit can slide and rotate in order to give the best visibility and working conditions possible. Add to that a wide range of options, including air condition or ACC, as well as on-screen troubleshooting informa-tion. A Dynapac is built for long-term productivity.

Environmental careEvery Dynapac is designed and built with focus on reduced environmental impact. Optimized engines reduce fuel consumption and emissions, and engines complying with Stage 3A are fitted as standard. Bio-degradable hydraulic fluid can be used, and it is easy to change engine liquids and hydraulic fluid without risk of spillage. To reduce noise, the cooling fans are thermostatically controlled, and the entire machine produces a surprisingly low level of ambient noise.

4

ServiceabilityDaily service points are few and the large hood and location of filters and filler caps make routine service tasks smooth and fast. And in order to assist the operator, service information is displayed on the dashboard LCD. Several Dynapac models share many common components and sub-systems. This modularity provides cost reductions possibilities - from development to service, spare part management and service technicians’ training and education.

◄

Comfort in mindThe operator unit is designed with operator comfort and safety in mind. The whole unit can slide and rotate to give the best visibility and working conditions possible.

◄ Service - easier than everDaily service points are few and easy. A foldable step on the side makes it easy to reach the filling caps and filters.

5

Optional air-on-the-run for adjusting tyre pressures.

Optional back-up sprinkler pump.

Modular design en-hances serviceability.

Asymmetrical cab and ROPS with a wide range of optional equipment.

The Dynapac DCA-A compaction analysis tool provides superior control.

Redundant dual-circuit braking system for increased reliability and safety.

Choice of two travel speeds

CP224W: Wide-base tyresWide-base tyres cause less lateral movement of the particles than standard tyres.

Dual-circuit braking system The braking system has two separate circuits. This means that full braking capacity is maintained even if a damaged hose or other failure should disable one of the circuits.

Brake pedal

BrakecylindersValve

Disc brakes

6

24 volts electrical system increases cranking capac-ity and general durability.

Engine type Stage 3A standard for all markets.

Fully hydraulic propulsion reduces maintenance costs.

Sliding and rotating operator’s module increases visibility and comfort.

Optional steel ballast can be mounted in separate boxes under the frame.

Easy and fast drain of water ballast increases productivity.

Outstanding operator comfort

Balanced all the way

In a Dynapac, the operator has the advantage of a highly ergonomic and user-friendly driver’s environment. The spacious asymmetrical cab can be equipped with air conditioning or ACC.

To achieve the same ground pressure on front and rear tyres, the ballast is distributed evenly, whether water, sand or steel is used.

The new CP224/274 rollers are under three

metres in height with Cab or ROPS.

This can be a key factor when transporting the

roller between worksites.

7

Customise Your DynapacStandard Equipment

Battery switchChoice of 2 travel speeds

Documentation (Manuals), one setDrainage for water ballast

Emergency stopEngine temperature display

Fuel level displayHorn

Hour meterHydraulic fluid temperature display

Hydraulic checkpointsHydrostatic drive with 2 hydraulic motors

Interloc systemKey master and start

Lifting pointsParking brake

Redundant brake systemSliding and swiveling operator unit

SpeedometerTachometer display

Tilt steering wheelTie down points

Voltage meter displayWarning – Air cleaner

Warning - BrakeWarning – Clogged hydraulic oil filter

Warning – Engine temperatureWarning – Engine oil pressure

Warning – Hydraulic fluid temperatureWarning – Low charge

Warning – Low fuel level2 multi-disc brakes for parking and

dynamic service brake

Standard Equipment for CabAir filtering systemFan, fresh air (3-speed)Interior lightRear view mirror, internalSeat beltSafety glass, tintedSide windows, openableHeaterWiper with washer, front/rear

Optional EquipmentAir on the runAsphalt temperature meterAWC (Automatic Water Control)Back up alarmBiodegradable hydraulic fluidCab, asymmetric, ROPSCanopyCocoa matsCompaction Analyzer – Dynapac DCA-AEdge cutterFire extinguisherFirst aid boxHeat covers for wheelsLights, driving, right-hand trafficLights, driving, left-hand trafficLights, working, front/rear for cab/ROPS/canopy (Helium or Xenon)Lights licence plateLunch box holderMichelin tyresProcess mirrorsRear view mirrors, externalROPS, 4 posts, with roof and seat beltRotating beaconSeat, luxury for platform and cab Slow moving vehicle signSprinkler and scraper systemSprinkler back up pumpSprinkler timerSteel ballastTool setTowing eyelets front & rearVandal cover for instrument panel (not cab)Water level gaugeWater tank covers, lockable3 inch seat belt

Optional Equipment for CabAir conditioning (AC), basic cooling functionAir conditioning (ACC), automatic climate controlRadio & CD playerRear view mirrors, externalSeat, luxury for cab

Dynapac Compaction Equipment AB, Box 504, SE-371 23 Karlskrona, Sweden. Tel: +46 455 30 60 00, Fax: +46 455 30 60 30We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.

The above information is a general description only, is not guaranteed and contains no warranties of any kind.

Find your local dealer at www.dynapac.com

3492

013

3 01

- O

ctob

er 2

009

Standard equipment / optional equipment may vary for different machines and markets.

Take care of your equipmentService Kit 50 Hrs.Service Kit 250/750 Hrs.Service Kit 500 Hrs.Service Kit 1000 Hrs.

CP224Pneumatic rollers

Technical data

Masses CP224Operating mass (incl. ROPS) 9,450 kgMass with wet sand ballast 14,150 kgMass with max. ballast 21,000 kgCompaction Rolling width 1,800 mmTyre overlap 42 mmWheel loads, without ballast 1,350 kgWheel loads, with wet sand ballast 2,020 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 13/80 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 2.20 m3

Traction Speed low 9 km/ hSpeed high 23 km/ hSpeed high (EEC countries) 20 km/ hEngine Manufacturer CumminsModel QSB 3.3 T3Type Water cooled turbo Diesel with After CoolerFuel tank capacity 210 lRated power 99 hpRated power 74 kWRated power @ 2,200 rpmRated power (rating standard) SAE J1995Electrical system 24VHydraulic system Driving Axial piston pump with variable displacement.

Axial piston motors (2) with variable displacement.Steering Axial piston pump with variable displacement.Service brake 2 multidisc brakes on rear wheels activated by pedal.Parking/ Emergency brake Failsafe multidisc brakes in both gear boxes.


Technical data

Masses CP224Operating mass (incl. ROPS) 9,450 kgMass with wet sand ballast 14,150 kgMass with max. ballast 21,000 kgCompaction Rolling width 1,800 mmTyre overlap 42 mmWheel loads, without ballast 1,350 kgWheel loads, with wet sand ballast 2,020 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 13/80 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 2.20 m3




We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

cp224_en-20090907.125354.pdf 2009-09-07 12:53

http://www.dynapac.com/

CP224WPneumatic rollers

Technical data

Masses CP224WOperating mass (incl. ROPS) 9,450 kgMass with wet sand ballast 14,150 kgMass with max. ballast 21,000 kgCompaction Rolling width 2,265 mmTyre overlap 42 mmWheel loads, without ballast 1,350 kgWheel loads, with wet sand ballast 2,020 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 14/70 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 2.20 m3



CP224WPneumatic rollers

Technical data

Masses CP224WOperating mass (incl. ROPS) 9,450 kgMass with wet sand ballast 14,150 kgMass with max. ballast 21,000 kgCompaction Rolling width 2,265 mmTyre overlap 42 mmWheel loads, without ballast 1,350 kgWheel loads, with wet sand ballast 2,020 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 14/70 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 2.20 m3





cp224w_en-20090907.125406.pdf 2009-09-07 12:54



Technical data

Masses CP274Operating mass (incl. ROPS) 10,800 kgMass with wet sand ballast 17,000 kgMass with max. ballast 27,000 kgCompaction Rolling width 2,300 mmTyre overlap 42 mmWheel loads, without ballast 1,200 kgWheel loads, with wet sand ballast 1,900 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 13/80 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 3 m3




Technical data

Masses CP274Operating mass (incl. ROPS) 10,800 kgMass with wet sand ballast 17,000 kgMass with max. ballast 27,000 kgCompaction Rolling width 2,300 mmTyre overlap 42 mmWheel loads, without ballast 1,200 kgWheel loads, with wet sand ballast 1,900 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 13/80 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 3 m3





cp274_en-20091014.154638.pdf 2009-10-14 15:46


Date post:	01-Aug-2018
Category:	Documents
Upload:	vankhuong
View:	216 times
Download:	0 times

Pneumatic Tyred Rollers -...

Documents