POLYAMIDE 6 & 66 FOR INJECTION MOULDING...2 Polymerization Integrated into In-House Compounding 50...

POLYAMIDE 6 & 66FOR INJECTION MOULDING

polymers.nurel.com

2

Polymerization Integrated into In-House Compounding50 years of experience in polymerization processes and brand new investments in state-of-the-art compound extrusion enable us to improve and widen our polyamide offer with increased capacity of PA6 & PA66 compounds for all polyamide markets involving new exciting products and partnerships.

Promyde® Polyamide 6 & 66Promyde® is processed by injection moulding and extrusion to produce parts and components for electrical and electronics, automotive and general industry always combining cost effectiveness with performance.

Your polyamide service and design partner becoming part of your business.With sophisticated laboratories for analysing both chemical and mechanical properties, along with parallel synergies with other polymerization companies within the SAMCA Group, NUREL can take customer requests for new developments from laboratory stages to full scale industrial production in months. Why not ask us?

Your Local Supply of PromydeNUREL has a PAN European distribution network giving a broad offer of polyamide, technical advice and a quick delivery service.

NUREL ENGINEERING POLYMERSINTRODUCING PROMYDE®

3

4

PROMYDE® PRODUCT OVERVIEWUNREINFORCED PA6

Unreinforced Promyde® is produced in NUREL’s polymerization process in which unique additivation packages and polymer chain modifications are made combining cost effectiveness and differential properties.

Customers receive Promyde unreinforced polyamide 6 in its purest state. Promyde unreinforced products are melted for the first time in our customer’s injection moulding machines. Hence, optimizing processing and performance.

MULTI PURPOSE FAST INJECTION*

B300 P Extremely High Flowing for design innovation, for very small pieces. Also to aid production of large parts in smaller machines. UL Certified.

B15 P For very fast multi cavity moulding of small parts. UL Certified.B20 P For precise technical moulding of both large or small parts. UL Certified.

B30 PWide processing window for general purpose unreinforced applications. B30 P is UL Certified with a Glow Wire Flamability Index 850ºC applicable for electrical parts. UL Certified.

B30 PN Non nucleated with slightly improved impact resistance over B30 P. Excellent colourability. UL Certified.

B35 P For Injection of thick wall parts, for example, thick chains or wheels. UL Certified.

B930 P For transparent applications requiring chemical resistance and mechanical strength.

B730 P For applications in which transparency is needed at high thickness.

HIGH VISCOSITY POLYAMIDEB33 BR1 For strong wheels and castors required to lift heavy loads.B36 BR1 High viscosity injection moulding grade.B38 BR1 For wheels and other thick walled parts.

B40 BR1 High viscosity injection moulding grade suitable for both small and large heavy duty wheels.

IMPACT MODIFIED*

B30 P MID Injection of wall plugs, fixing systems and other applications. A combination of flexibility and resistance to breakage by impact. Also useful in over moulding.

B30 P2 HI For applications requiring extra resistance to breakage by impact.

B30 P2 HI C For extra high impact resistance is in freezing cold temperatures over -30ºC. For example ski wear and auto shock absorbers.

B30 P2 HI60 For impact resistance for Charpy 60 and below.B300 P2 HI For applications requiring extra impact resistance and improved flowability.

B300 P2 HI60 For applications requiring impact resistance for Charpy 60 and below and improved flowability.

FLAME RETARDANT*B15 U For small electrical parts. Glow Wire Flammability Index 960ºC. UL Certified.

B30 U For natural and coloured electrical parts requiring a Glow Wire Flammability Index of 960ºC. UL certified.

B30 P2 U0 For standard unfilled V0 requests. UL certified.B30 P2 U0 T For V0 requests with high mechanical strenght and improved toughness.

*All these grades are also available with UV & HS packages. All colours are available upon request.

5

PROMYDE® PRODUCT OVERVIEWREINFORCED PA6 & PA66

NUREL’s offer for PA6 & PA66 compounds guarantees that our customers receive consistency in processing and product behaviour.

Promyde® Reinforced Products:10-60% GLASS FILLED

Excellent flow processing & smooth surface appearance.

HIGH FLOW

All our reinforced grades are also available with a high flow polymer base.

IMPACT MODIFIED

Both medium and high impact resistant products.

FLAME RETARDANT AND SELF EXTINGUISHINGFor electrical and electronics: V0 ratings, no flame up to 825ºC.

30% & 40% MINERAL FILLED

For extra flatness.

COLOURING

In RAL colour cards and customized colour matching under demand.

LASER MARKING

All our grades are also laser markable under demand.

UV, HS, HR

Improved UV, Heat Resistance and/or Hydrolysis Resistance.

15-30% NATURAL FILLED

Partially biobased and low density.

6

High Flow PA6 - B300 Types:Promyde® High Flow B300 product range includes unreinforced and 15-60% Glass filled references along with other reinforced PAs to achieve an easier and smoother injection process.

• Processing at 30ºC to 45ºC lower temperaturePolymer enters mould coolerand is released earlier.

• Remarkable Cycle Time improvementIts higher fluidity, allows lower injection temperature and, therefore, quicker cooling time, thus improving the output. Reduces cycle time by 30%.

• Reduce Clamp Force significantlyProcess at regular temperatures permits the use of smaller machines.

• Make smoother parts. Improve surface finishOutstanding surface finish up to 60% glass content.

• Innovative design is permittedExtremely small and intricate parts can be designed with Promyde B300.

It is a recommended alternative to PA66 and conventional unfilled PA6 types.

HIGH FLOW POLYAMIDESPROMYDE® SPECIALITIES

7

Comparative Moldflow Study Process at 250ºC & Improve Cycle Time by 30%

Setting the temperature 45ºC lower with Promyde B300 P2 G30 than the competitor’s standard PA6 G30 results in:

The same clamp force for both materials, Promyde cools 30% faster. Not only saving energy, but also increasing productivity.

Filling Temperature: 250ºC Promyde B300 P2 G30 / 295ºC Competitor PA6 G30.

Promyde B300 P2 G30 20s*

Competitor’s PA6 G30 29s*

* Time to reach ejection temperature

(C)283.0

227.8

172.6

117.4

62.23

(C)310.0

256.4

202.8

149.2

95.56

HIGH FLOW POLYAMIDESPROMYDE® SPECIALITIES

Reduced Clamping ForceA simulation of a technical part benefitting from injectionwith Promyde B300 P2 G30 is compared to a conventionalPA6 + 30% glass fiber from an equivalent in the market.

Simulation of Automobile Front Bumperwith two injection inlets

Filling time programmed: 3.65s

Clamp force is reduced by 30% with Promyde®

Both materials are programmed with the same temperature, time and holding pressure. The clamp force is reduced by 30% with Promyde. Thus, a smaller injection machine can be used, enhancing cost effectiveness.

Melt Temperature270ºC

Holding pressure80MPa (15s)

(s)3.750

2.812

1.875

0.9374

0.0000

1500

1000

500

0

Tone

s

Reduction in Clamping Force

PromydeB300 P2 G30

CompetitorsPA6 G30

8

HEAT STABILIZEDPROMYDE® SPECIALITIES

After ageing, PA6 tensile strength begins to be higher than PA66 at any temperature. PA6 shows better performance in terms of mechanical properties than PA66.

Before ageing:

100

120

140

160

180

Time in oven at 170ºC (h)

Tens

ile S

treng

th (M

Pa)

200

220

0 500 1000 1500 2000 2500 3000

B300 P2 G30 HSAPA66 30FV HS

0

50

100

150

Temperature (ºC)

Tens

ile S

treng

th (M

Pa)

200

250

0 50 100 150

B300 P2 G30 HSAPA66 G30 HS

0

50

100

150

Temperature (ºC)

Tens

ile S

treng

th (M

Pa)

200

250

0 50 100 150

B300 P2 G30 HSAPA66 G30 HS

Parts requiring long term thermal protection would benefit from this new PA6 development. Our new Promyde® HSA series maintains its properties even at High Temperature environments such as car engines.

Hi-performance at Hi-temperatureFor applications with temperatures of continuous use up to 185ºC, Promyde HSA grades maintain their mechanical properties with small variations after ageing.

HSA features can be applied to any Promyde product from 10 up to 60% fiber content.

After ageing (3,000h at 170ºC):

9

Nano Clay Fortified Polyamide 6We take special clay and exfoliate it in nano size particles which are then chemically bonded to the polymer matrix.

Nano Clay benefits

• B30 NC 100 is 17% lighter than 30% mineral filled and glass bead filled PA

• Mechanical performance is maintained against PA6 & PA66 compounds

• Besides these benefits, Nano Clay has light blocking properties

New Developments With Natural FibersThe NEW natural fiber-reinforced Promyde range offers PA compounds with a considerable weight reduction, superior thermal resistance and a renewable content from 15 to 30%.

Tensile Modulus (MPa) HDT (ºC) Density (g/cm3)ISO 527-1/-2 ISO 75-1/-2 ISO 1183

B300 P2 NFC 30 4,100 120 1.2

B30 P2 M30 5,200 100 1.36

1.4

1.3

1.2

1.1

1

Density /g/ml)

B30 NC 100

PA630 GB

PA630 M

PA6630 GB

PA6630 M

WEIGHT REDUCTIONPROMYDE® SPECIALITIES

Lightweight materials have always been an important topic in product design across several industries.

The concept has been most important in aviation and automotive as a strategy to significantly reduce fuel consumption, CO2 emissions and to enhance dynamic performance.

NUREL offers three different solutions on its weight reduction portfolio:

Promyde® Reinforced SolutionsGlass Fibers & Glass Beads 10% Reduced Density in Glass Filled PA6

B30 P2 G25 WR is our new proposal for weight reduction where conventional PA with 25-30%GF can be substituted for a lighter weight alternative.

Tensile Modulus (MPa) HDT (ºC) Density (g/cm3)ISO 527-1/-2 ISO 75-1/-2 ISO 1183

B30 P2 G30 9,300 210 1.36

B30 P2 G25 8,000 210 1.32

B30 P2 G25 WR 7,600 200 1.22

10% Weight reduction in Glass & Mineral Filled compounds

A combination of both above technologies can provide further weight reduction up to 20% for applications where mechanical and weight reduction is a need.

FlexuralModulus

(MPa)

FlexuralStrenght

(MPa)

CharpyImpact

(CE 23ºC)

Density (g/cm3)

WeightReduction

(%)ISO 178 ISO 178 ISO 179/1eU ISO 1183 -

B300 P2 G20 M15 8,437 181.5 4.2 1.42 -

B300 P2 G16 HB M15 8,011 174.2 3.6 1.29 9.15

10

IMPROVED TRANSPARENCYPROMYDE® SPECIALITIES

Responding to Modern Consumer TendenciesIn touch with current market trends via other activities within the SAMCA Group, such as ceramic sciences, and conductive technologies, we can modify polymer crystallisation capabilities and also conductive properties to respond to specific modern requirements.

Improved Transparency Recent market requests, asking for transparent polyamides, have coincided with NUREL’s continued development program.

Promyde B930 P and B730 P are available upon request for applications where extra transparency is desired over conventional Polyamide 6 applications. Both are a semi-crystalline copolyamides. B930 P is only recommended for applications under 60ºC and up to 2 mm thick, whereas B730 P is recommended for thicker parts under 80ºC.

Main applications include:• Automotive applications can be used for decorative

surfaces and liquid level indicators• Window and inspection glasses, flow meters• Ink cartridges for printers

Thickness1.5mm

Temperature30ºC

9

6

3

0

% Haze ASTMD 1003

Transparent PA Promyde B930 P Promyde B730 P

11

Conductive Compounds Adjustable to your Needs In response to a growing demand in the electrical, electronic and automotive sectors, where weight limitation and design requirements are becoming stronger, NUREL works in the development of new materials with controlled thermal and electrical properties.

Thanks to our extensive knowledge in polymerization as well as in nanotechnology, we have been able to increase the electrical and thermal conductivity of PA6.

Electrical conductivity

Currently we can offer PA6 polymers with wide range of electrical conductivity, from antistatic grades to highly conductive grades (from 10 to 1012 Ohm).

Electrical conductive compounds are used for applications such as electrostatic painting parts, very fine electronic parts or electrostatic surfaces for medical applications.

Thermal conductivity

NUREL offers the possibility of adding heat-conducting properties to our polymers to help dissipate the heat caused by electrical and electronic circuits. Our new range of Promyde PA6 compounds can reach values of thermal conductivity of between 2 to 10 W / mK, offering a wide range of products for black or also for coloured parts.

Thermo-conductive plastics can also obtain a considerable reduction of weight thanks to the substitution of metallic pieces. Thermo-conductive materials are mainly used for heat sinks in electric motors, circuits or lamps.

CONDUCTIVE COMPOUNDSPROMYDE® SPECIALITIES

12

PROMYDE® PROPERTIESPOLYAMIDE 6

UNREINFORCED PA6 UNREINFORCED PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B15 P B20 P B30 P B30 PN B35 P B33 BR1 B36 BR1 B40 BR1 B930 P B730PDensity 23 ºC ISO 1183 g/cm3 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.11 1.15Viscosity Number 25 ºC ISO 307 cm3/g 120 125 145 145 163 203 228 263 125 -Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.0 3.0 3.0 3.0 3 3.0 3.0 3.0 3.0 3Water absorption 23 ºC/saturation ISO 62 % 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5Flammability 1.5 mm UL-94 Class V-2 V-2 V-2 V-2 V-2 V-2 V-2 V-2 V-2 V-2Glow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 850 850 850 - - - - - 800 800Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 700 700 725 - - - - - 675 825

PROCESSING CONDITIONSMelt Volume rate 275 ºC / 5 kg ISO 1133 cm3/10min 260 226 145 145 75 35 25 14 180 -Melt temperature, injection moulding ºC 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 260 - 280 260 - 280 260 - 280 220 - 250 210 - 290Mould temperature ºC 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 0 - 30 0 - 80

Mould Shrinkage longitudinal % 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 1.20 - 1.40 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.80 - 1.00 0.16 - 0.24transversal % 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 1.08 - 1.40 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.70 - 0.90 0.00 - 0.08

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 3,300 / 1,100 3,300 / 1,100 3,300 / 1,100 3,200 / 1,100 3,300 / 1,100 3,400 / 1,100 3,400 / 1,100 3,400 / 1,100 2,600 / 1,000 2,900 / 1,500Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 85 / 40 85 / 40 85 / 40 85 / 40 85 / 40 85 / 40 85 / 40 90 / 40 75 / 35 50 / 30Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 25 3.5 / 25 3.5 / 25 3.5 / 25 3.5 / 25 4.0 / 25 4.0 / 25 4.0 / 25 4.0 / 40 -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 18 / >50 18 / >50 18 / >50 18 / >50 30 / >50 50 / >50 60 / >50 70 / >50 140 / >50 1.9 / >20Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,800 / 1,000 2,800 / 1,000 2,800 / 1,000 2,700 / 1,000 2,800 / 1,000 2,900 / 1,000 2,800 / 1,000 2,900 / 1,000 2,500 / 1,000 1,800 / 1,300Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 110 / 30 110 / 30 110 / 30 105 / 30 110 / 30 110 / 30 115 / 30 115 / 30 100 / 30 112 / 60

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB NB / NB NB / NB NB / NB NB / NB NB / NB NB / NB NB / NB 95 / NB 139 / NB-30 ºC ISO 179/1eU kJ/m2 320 320 - - - - - - - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5.0 / 30 5.0 / 30 5.0 / 30 5.5 / 30 6.0 / 35 5.4 / 32 6.0 / 35 6.2 / 38 5.0 / 30 6.8 / 40-30 ºC ISO 179/1eA kJ/m2 4.5 4.5 4.5 - - - - - - -

THERMAL PROPERTIESMelting temperature (DSC) 10 ºC/min ISO 3146 ºC 222 222 222 222 222 222 222 222 210 185

Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 65 65 65 65 65 65 65 65 55 600.45 MPa ISO 75-1/-2 ºC 187 187 187 197 187 197 197 197 180 60

Thermal coefficient of linear expasion 23-80 ºC long. ISO 11359-1/-2 10-4/k 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.7023-80 ºC transv. ISO 11359-1/-2 10-4/k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 -Dissipation factor 1MHz ISO 60250 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 -Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 -Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 -Comparative tracking index ISO 60112 600 600 600 600 600 600 600 600 600 -

Unreinforced Unreinforced Unreinforced Unreinforced Unreinforced High viscosity High viscosity High viscosity Improved transparency

Extra improved transparency Lubricated Lubricated Lubricated Lubricated Lubricated

Nucleated Nucleated Nucleated Nucleated

(1) NB: No break. | * dry = dry as moulded / cond. = conditioned according to ISO 1110All these grades are also available with UV & HS packages. All colours are available upon request.

13

UNREINFORCED PA6 UNREINFORCED PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B15 P B20 P B30 P B30 PN B35 P B33 BR1 B36 BR1 B40 BR1 B930 P B730PDensity 23 ºC ISO 1183 g/cm3 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.11 1.15Viscosity Number 25 ºC ISO 307 cm3/g 120 125 145 145 163 203 228 263 125 -Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.0 3.0 3.0 3.0 3 3.0 3.0 3.0 3.0 3Water absorption 23 ºC/saturation ISO 62 % 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5Flammability 1.5 mm UL-94 Class V-2 V-2 V-2 V-2 V-2 V-2 V-2 V-2 V-2 V-2Glow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 850 850 850 - - - - - 800 800Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 700 700 725 - - - - - 675 825

PROCESSING CONDITIONSMelt Volume rate 275 ºC / 5 kg ISO 1133 cm3/10min 260 226 145 145 75 35 25 14 180 -Melt temperature, injection moulding ºC 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 260 - 280 260 - 280 260 - 280 220 - 250 210 - 290Mould temperature ºC 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 0 - 30 0 - 80

Mould Shrinkage longitudinal % 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 1.20 - 1.40 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.80 - 1.00 0.16 - 0.24transversal % 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 1.08 - 1.40 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.70 - 0.90 0.00 - 0.08

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 3,300 / 1,100 3,300 / 1,100 3,300 / 1,100 3,200 / 1,100 3,300 / 1,100 3,400 / 1,100 3,400 / 1,100 3,400 / 1,100 2,600 / 1,000 2,900 / 1,500Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 85 / 40 85 / 40 85 / 40 85 / 40 85 / 40 85 / 40 85 / 40 90 / 40 75 / 35 50 / 30Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 25 3.5 / 25 3.5 / 25 3.5 / 25 3.5 / 25 4.0 / 25 4.0 / 25 4.0 / 25 4.0 / 40 -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 18 / >50 18 / >50 18 / >50 18 / >50 30 / >50 50 / >50 60 / >50 70 / >50 140 / >50 1.9 / >20Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,800 / 1,000 2,800 / 1,000 2,800 / 1,000 2,700 / 1,000 2,800 / 1,000 2,900 / 1,000 2,800 / 1,000 2,900 / 1,000 2,500 / 1,000 1,800 / 1,300Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 110 / 30 110 / 30 110 / 30 105 / 30 110 / 30 110 / 30 115 / 30 115 / 30 100 / 30 112 / 60

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB NB / NB NB / NB NB / NB NB / NB NB / NB NB / NB NB / NB 95 / NB 139 / NB-30 ºC ISO 179/1eU kJ/m2 320 320 - - - - - - - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5.0 / 30 5.0 / 30 5.0 / 30 5.5 / 30 6.0 / 35 5.4 / 32 6.0 / 35 6.2 / 38 5.0 / 30 6.8 / 40-30 ºC ISO 179/1eA kJ/m2 4.5 4.5 4.5 - - - - - - -


Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 65 65 65 65 65 65 65 65 55 600.45 MPa ISO 75-1/-2 ºC 187 187 187 197 187 197 197 197 180 60


ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 3.5 / 7.0 -Dissipation factor 1MHz ISO 60250 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 -Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 -Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 -Comparative tracking index ISO 60112 600 600 600 600 600 600 600 600 600 -

Unreinforced Unreinforced Unreinforced Unreinforced Unreinforced High viscosity High viscosity High viscosity Improved transparency

Extra improved transparency Lubricated Lubricated Lubricated Lubricated Lubricated

Nucleated Nucleated Nucleated Nucleated


Values have been established by standard tests. The data should be considered as a guide and not as binding minimum values. Because may factors affect processing or applications, we recommend that individual tests are performed to determine the suitability of the product use.

14


REINFORCED PA6 REINFORCED PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B30 P2 G10 B30 P2 G15 B30 P2 G20 B30 P2 G30 B30 P2 G35 B30 P2 G40 B30 P2 G50 B30 P2 GFC15 B30 P2 GFC30 B30 P2 GB30 B30 P2 M30 B30 P2 M40Density 23 ºC ISO 1183 g/cm3 1.20 1.22 1.28 1.36 1.40 1.46 1.56 1.22 1.36 1.36 1.36 1.46Viscosity Number 25 ºC ISO 307 cm3/g 145 145 145 145 145 145 145 145 145 145 145 145Moisture absorption 23 ºC/50% r.h. ISO 62 % 2.8 2.6 2.3 2.1 2.0 1.8 1.5 2.6 2.1 2.1 2.1 1.8Water absorption 23 ºC/saturation ISO 62 % 8.5 8.0 6.9 6.7 6.2 6.0 4.5 8.0 6.7 6.7 6.7 5.7Flammability 1.5 mm UL-94 Class HB HB HB HB HB HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - - - - - 750Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - - - - - 700

PROCESSING CONDITIONSMelt Volume rate 275 ºC / 5 kg ISO 1133 cm3/10min 75 60 55 45 35 26 25 60 45 45 45 70Melt temperature, injection moulding ºC 260 - 290 260 - 290 260 - 290 260 - 290 270 - 290 270 - 290 270 - 290 260 - 290 260 - 290 260 - 290 260 - 290 270 - 290Mould temperature ºC 40 - 80 40 - 80 40 - 80 80 - 95 80 - 95 80 - 95 80 - 95 40 - 80 80 - 95 80 - 95 40 - 80 40 - 80

Mould Shrinkage longitudinal % 0.40 - 0.80 0.40 - 0.70 0.40 - 0.70 0.30 - 0.35 0.30 - 0.35 0.30 - 0.35 0.30 - 0.35 0.40 - 0.7 0.30 - 0.35 0.30 - 0.35 - / - - / -transversal % 0.70 - 1.00 0.60 - 0.90 0.60 - 0.90 0.40 - 0.45 0.40 - 0.45 0.40 - 0.45 0.40 - 0.45 0.60 - 0.9 0.40 - 0.45 0.35 - 0.40 - / - - / -

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 4,500 / 2,700 6,000 / 3,400 6,500 / 4,500 9,300 / 6,200 11,000 / 7,500 13,000 / 8,500 15,600 / 10,000 6,000 / 3,400 9,300 / 6,200 4,400 / 1,900 5,200 / 2,000 6,000 / 3,000Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 110 / 68 150 / 78 145 / 85 190 / 110 195 / 130 205 / 138 215 / 150 150 / 78 190 / 110 60 / 40 80 / 50 90 / 60Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 7.0 3.5 / 7.0 3.5 / 6.5 3.0 / 5.0 3.0 / 4.0 3.0 / 3.5 3.0 / 3.5 3.0 / 5.0 8.0 / - 3.0 / 7.0 3.0 / 7.0 3.0 / 7.0Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 4,300 / 2,400 5,000 / 2,400 5,500 / 3,500 8,000 / 5,100 9,500 / 6,000 10,600 / 6,500 14,000 / 8,000 5,000 / 2,400 8,000 / 5,100 4,000 / 1,700 3,900 / 2,000 5,500 / 2,800Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 160 / 90 180 / 90 195 / - 250 / 180 275 / - 285 / 180 340 / - 180 / 90 250 / 180 120 / 70 94 / 50 145 / 110

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 40 / 80 50 / 90 70 / 95 85 / 95 90 / 100 95 / 100 95 / 110 50 / 90 85 / 95 50 / 75 - / - - / --30 ºC ISO 179/1eU kJ/m2 30 43 - 75 - - - 43 75 40 - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5.0 / 8.0 5.5 / 12 8.0 / 26 13 / 25 14 / 25 16 / 22 19 / 27 5.5 / 12 13 / 25 4.0 / 10 5.3 / 25 4.0 / 20-30 ºC ISO 179/1eA kJ/m2 4.0 5.0 - 10 - - - 5.0 10 3.0 4.0 3.0

THERMAL PROPERTIESMelting temperature (DSC) 10 ºC/min ISO 3146 ºC 222 222 222 222 222 222 222 222 222 222 222 222

Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 190 190 205 210 213 213 215 190 210 90 100 1000.45 MPa ISO 75-1/-2 ºC 215 215 215 215 215 215 215 215 215 180 - -

Thermal coefficient of linear expasion 23-80 ºC long. ISO 11359-1/-2 10-4/k 0.30 0.30 0.20 0.20 0.18 0.16 0.13 0.30 0.20 0.20 0.20 0.3023-80 ºC transv. ISO 11359-1/-2 10-4/k 0.70 0.70 0.60 0.60 0.60 0.60 0.50 0.70 0.60 0.60 0.60 0.60

ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.6 / 6.9 3.6 / 6.9 3.8 / 6.8 3.8 / 6.8 3.8 / 6.5 3.9 / 6.5 4.2 / 6.3 3.6 / 6.9 3.8 / 6.8 3.7 / 6.1 3.8 / 6.2 3.9 / 6.2Dissipation factor 1MHz ISO 60250 250 / 2,200 250 / 2,200 250 / 2,200 230 / 2,200 230 / 2,200 190 / 1,800 140 / 1,400 250 / 2,200 230 / 2,200 220 / 2,100 200 / 2,000 180 / 1,800Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Comparative tracking index ISO 60112 500 500 500 500 500 500 500 500 500 500 500 500

Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Glass beads reinforced

Mineral reinforced

Mineral reinforcedFood contact Food contact


15

REINFORCED PA6 REINFORCED PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B30 P2 G10 B30 P2 G15 B30 P2 G20 B30 P2 G30 B30 P2 G35 B30 P2 G40 B30 P2 G50 B30 P2 GFC15 B30 P2 GFC30 B30 P2 GB30 B30 P2 M30 B30 P2 M40Density 23 ºC ISO 1183 g/cm3 1.20 1.22 1.28 1.36 1.40 1.46 1.56 1.22 1.36 1.36 1.36 1.46Viscosity Number 25 ºC ISO 307 cm3/g 145 145 145 145 145 145 145 145 145 145 145 145Moisture absorption 23 ºC/50% r.h. ISO 62 % 2.8 2.6 2.3 2.1 2.0 1.8 1.5 2.6 2.1 2.1 2.1 1.8Water absorption 23 ºC/saturation ISO 62 % 8.5 8.0 6.9 6.7 6.2 6.0 4.5 8.0 6.7 6.7 6.7 5.7Flammability 1.5 mm UL-94 Class HB HB HB HB HB HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - - - - - 750Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - - - - - 700


Mould Shrinkage longitudinal % 0.40 - 0.80 0.40 - 0.70 0.40 - 0.70 0.30 - 0.35 0.30 - 0.35 0.30 - 0.35 0.30 - 0.35 0.40 - 0.7 0.30 - 0.35 0.30 - 0.35 - / - - / -transversal % 0.70 - 1.00 0.60 - 0.90 0.60 - 0.90 0.40 - 0.45 0.40 - 0.45 0.40 - 0.45 0.40 - 0.45 0.60 - 0.9 0.40 - 0.45 0.35 - 0.40 - / - - / -

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 4,500 / 2,700 6,000 / 3,400 6,500 / 4,500 9,300 / 6,200 11,000 / 7,500 13,000 / 8,500 15,600 / 10,000 6,000 / 3,400 9,300 / 6,200 4,400 / 1,900 5,200 / 2,000 6,000 / 3,000Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 110 / 68 150 / 78 145 / 85 190 / 110 195 / 130 205 / 138 215 / 150 150 / 78 190 / 110 60 / 40 80 / 50 90 / 60Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 7.0 3.5 / 7.0 3.5 / 6.5 3.0 / 5.0 3.0 / 4.0 3.0 / 3.5 3.0 / 3.5 3.0 / 5.0 8.0 / - 3.0 / 7.0 3.0 / 7.0 3.0 / 7.0Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 4,300 / 2,400 5,000 / 2,400 5,500 / 3,500 8,000 / 5,100 9,500 / 6,000 10,600 / 6,500 14,000 / 8,000 5,000 / 2,400 8,000 / 5,100 4,000 / 1,700 3,900 / 2,000 5,500 / 2,800Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 160 / 90 180 / 90 195 / - 250 / 180 275 / - 285 / 180 340 / - 180 / 90 250 / 180 120 / 70 94 / 50 145 / 110

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 40 / 80 50 / 90 70 / 95 85 / 95 90 / 100 95 / 100 95 / 110 50 / 90 85 / 95 50 / 75 - / - - / --30 ºC ISO 179/1eU kJ/m2 30 43 - 75 - - - 43 75 40 - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5.0 / 8.0 5.5 / 12 8.0 / 26 13 / 25 14 / 25 16 / 22 19 / 27 5.5 / 12 13 / 25 4.0 / 10 5.3 / 25 4.0 / 20-30 ºC ISO 179/1eA kJ/m2 4.0 5.0 - 10 - - - 5.0 10 3.0 4.0 3.0


Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 190 190 205 210 213 213 215 190 210 90 100 1000.45 MPa ISO 75-1/-2 ºC 215 215 215 215 215 215 215 215 215 180 - -



Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010


Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Glass beads reinforced

Mineral reinforced

Mineral reinforcedFood contact Food contact



16


IMPACT MODIFIED PA6 IMPACT MODIFIED PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B30 P MI D B30 P2 MI B30 P2 HI60 B30 P2 HI B30 P2 HIC B30 P2 G15 MI B30 P2 G30 MI B30 P2 G40 MI B300 P2 HI 60 B300 P2 HI B300 P2 G15 MI B300 P2 G20 MIDensity 23 ºC ISO 1183 g/cm3 1.13 1.10 1.10 1.08 1.05 1.21 1.33 1.43 1.10 1.08 1.21 1.21Viscosity Number 25 ºC ISO 307 cm3/g 110 125 125 125 125 145 110 145 100 100 100 100Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.3 2.5 2.4 2.4 2.4 2.2 6.3 1.5 2.6 2.4 2.2 2.0Water absorption 23 ºC/saturation ISO 62 % 9.5 8.5 8.1 7.6 7.6 7.0 2.0 4.9 8.1 7.6 7.0 6.8Flammability 1.5 mm UL-94 Class HB HB HB HB HB HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 850 - - - - - - - - - - -Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 800 - - - - - - - - - - -


Mould Shrinkage longitudinal % 0.90 - 1.10 0.90 - 1.10 0.80 - 1.00 0.80 - 1.00 0.80 - 1.00 0.30 - 0.35 0.30 - 0.35 - 0.80 - 0.90 0.70 - 0.90 0.30 - 0.35 0.30 - 0.35transversal % 0.80 - 1.10 0.80 - 1.10 0.70 - 1.00 0.70 - 1.00 0.70 - 1.00 0.40 - 0.45 0.40 - 0.45 - 0.70 - 0.90 0.60 - 0.90 0.40 - 0.45 0.40 - 0.45

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 2,800 / 1,100 2,800 / 1,100 2,100/1,300 2,200 / 1,100 2,000 / 1,000 4,500 / 2,400 9,000 / 6,000 11,000 / 6,200 2,100 / 1,300 2,200 / 1,100 4,500 / 2,400 5,000 / 2,900Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 75 / 35 75 / 35 60 / 35 65 / 35 60 / 30 90 / 50 160 / 90 170 / 115 60 / 35 65 / 35 90 / 50 110 / 70Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 4.0 / 25 05 /25 4.5 / 35 4.5 / 35 5.0 / 35 - / - - / - - / - 4.5 / 35 4.5 / 35 - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 50 / 180 25 / 180 35 / >50 35 / > 50 35 / >50 10 / - 4.0 / 6.0 4.5 / 9.5 35 / >50 35 / >50 10 / - 4.5 / -Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,400 / 700 2,300 / 750 1,700 / 900 1,700 / 400 1,700 / 400 3,900 / 2,000 7,500 / 4,000 9,500 / 6,000 1,700 / 900 1,700 / 400 3,900 / 2,000 4,500 / 2,800Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 98 / 32 85 / 25 70 / 35 65 / 20 65 / 20 137 / 70 240 / - 240 / 140 70 / 35 65 / 20 137 / 70 150 / 85

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB NB / NB NB / NB NB / NB NB / NB 75 / 100 100 / 105 100 / 130 NB / NB NB / NB 75 / 100 75 / --30 ºC ISO 179/1eU kJ/m2 - NB NB NB NB 60 90 95 NB NB 60 / - - / -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 13 / NB 14 / NB 65 / 125 100 / 125 80 / NB 16 / 30 20 / 30 22 / 40 65 / 125 100 / 125 16 / 30 20 / 40 -30 ºC ISO 179/1eA kJ/m2 10 12 20 31.5 60 10 16 17 20 32 10 10


Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 60 55 50 50 50 182 200 205 50 50 182 1950.45 MPa ISO 75-1/-2 ºC 150 150 - - - 200 215 215 - - 200 200



Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 -/- 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 - / - 1013 / 1010 1013 / 1010 1013 / 1010


Medium impact res. Medium impact res. High impact res. High impact res. High impact res. at low Temp.

High impact res. High impact res. High impact res. High impact res. High impact res. High impact res. High impact res.Food contact Reinforced Reinforced Reinforced High flow High flow Reinforced Reinforced

High flow High flow


17

IMPACT MODIFIED PA6 IMPACT MODIFIED PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B30 P MI D B30 P2 MI B30 P2 HI60 B30 P2 HI B30 P2 HIC B30 P2 G15 MI B30 P2 G30 MI B30 P2 G40 MI B300 P2 HI 60 B300 P2 HI B300 P2 G15 MI B300 P2 G20 MIDensity 23 ºC ISO 1183 g/cm3 1.13 1.10 1.10 1.08 1.05 1.21 1.33 1.43 1.10 1.08 1.21 1.21Viscosity Number 25 ºC ISO 307 cm3/g 110 125 125 125 125 145 110 145 100 100 100 100Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.3 2.5 2.4 2.4 2.4 2.2 6.3 1.5 2.6 2.4 2.2 2.0Water absorption 23 ºC/saturation ISO 62 % 9.5 8.5 8.1 7.6 7.6 7.0 2.0 4.9 8.1 7.6 7.0 6.8Flammability 1.5 mm UL-94 Class HB HB HB HB HB HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 850 - - - - - - - - - - -Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 800 - - - - - - - - - - -


Mould Shrinkage longitudinal % 0.90 - 1.10 0.90 - 1.10 0.80 - 1.00 0.80 - 1.00 0.80 - 1.00 0.30 - 0.35 0.30 - 0.35 - 0.80 - 0.90 0.70 - 0.90 0.30 - 0.35 0.30 - 0.35transversal % 0.80 - 1.10 0.80 - 1.10 0.70 - 1.00 0.70 - 1.00 0.70 - 1.00 0.40 - 0.45 0.40 - 0.45 - 0.70 - 0.90 0.60 - 0.90 0.40 - 0.45 0.40 - 0.45

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 2,800 / 1,100 2,800 / 1,100 2,100/1,300 2,200 / 1,100 2,000 / 1,000 4,500 / 2,400 9,000 / 6,000 11,000 / 6,200 2,100 / 1,300 2,200 / 1,100 4,500 / 2,400 5,000 / 2,900Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 75 / 35 75 / 35 60 / 35 65 / 35 60 / 30 90 / 50 160 / 90 170 / 115 60 / 35 65 / 35 90 / 50 110 / 70Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 4.0 / 25 05 /25 4.5 / 35 4.5 / 35 5.0 / 35 - / - - / - - / - 4.5 / 35 4.5 / 35 - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 50 / 180 25 / 180 35 / >50 35 / > 50 35 / >50 10 / - 4.0 / 6.0 4.5 / 9.5 35 / >50 35 / >50 10 / - 4.5 / -Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,400 / 700 2,300 / 750 1,700 / 900 1,700 / 400 1,700 / 400 3,900 / 2,000 7,500 / 4,000 9,500 / 6,000 1,700 / 900 1,700 / 400 3,900 / 2,000 4,500 / 2,800Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 98 / 32 85 / 25 70 / 35 65 / 20 65 / 20 137 / 70 240 / - 240 / 140 70 / 35 65 / 20 137 / 70 150 / 85

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB NB / NB NB / NB NB / NB NB / NB 75 / 100 100 / 105 100 / 130 NB / NB NB / NB 75 / 100 75 / --30 ºC ISO 179/1eU kJ/m2 - NB NB NB NB 60 90 95 NB NB 60 / - - / -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 13 / NB 14 / NB 65 / 125 100 / 125 80 / NB 16 / 30 20 / 30 22 / 40 65 / 125 100 / 125 16 / 30 20 / 40 -30 ºC ISO 179/1eA kJ/m2 10 12 20 31.5 60 10 16 17 20 32 10 10


Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 60 55 50 50 50 182 200 205 50 50 182 1950.45 MPa ISO 75-1/-2 ºC 150 150 - - - 200 215 215 - - 200 200



Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 -/- 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 - / - 1013 / 1010 1013 / 1010 1013 / 1010


Medium impact res. Medium impact res. High impact res. High impact res. High impact res. at low Temp.

High impact res. High impact res. High impact res. High impact res. High impact res. High impact res. High impact res.Food contact Reinforced Reinforced Reinforced High flow High flow Reinforced Reinforced

High flow High flow



18

HIGH FLOW PA6 HIGH FLOW PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B300 P B300 P2 G20 M15 B300 P2 G30 B300 P2 G40 B300 P2 G50 B300 P2 G60 B300 P2 GFC15 B300 P2 GFC30 B300 P2 GFC50 B300 P2 M40Density 23 ºC ISO 1183 g/cm3 1.13 1.42 1.36 1.46 1.56 1.69 1.22 1.36 1.56 1.45Viscosity Number 25 ºC ISO 307 cm3/g 100 100 100 100 100 - 100 - - 100Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.0 2.0 2.1 1.8 1.5 1.2 2.6 2.1 1.5 1.8Water absorption 23 ºC/saturation ISO 62 % 9.5 6.0 6.7 6.0 4.5 4.5 8.0 6.7 4.5 5.4Flammability 1.5 mm UL-94 Class V-2 HB HB HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 750 - - - - - - - - -Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 700 - - - - - - - - -

PROCESSING CONDITIONSMelt Volume rate 275 ºC / 5 kg ISO 1133 cm3/10min >300 100 90 57 37 35 135 90 35 300Melt temperature, injection moulding ºC 230 - 280 240 - 290 235 - 250 235 - 260 235 - 260 235 - 270 230 - 260 235 - 250 235- 280 250 - 290Mould temperature ºC 40 - 80 40 - 80 40 - 80 40 - 80 40 -80 40 - 80 40 - 80 40 - 80 40 - 80 40 -80

Mould Shrinkage longitudinal % 0.90 - 1.10 0.20 - 0.30 0.30 - 0.35 0.30 - 0.35 0.90 0.20 - 0.25 0.40 - 0.70 0.15 0.30 - 0.35 - / -transversal % 0.80 - 1.10 0.30 - 0.40 0.40 - 0.45 0.40 - 0.45 1.30 0.30 - 0.35 0.60 - 0.90 0.75 0.40 - 0.45 - / -

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 3,200 / 1,100 9,500 / 5,500 9,900 / 6,700 14,500 / 8,700 17,000 / 10,000 21,000 / 17,000 6,000 / 3,400 9,900 / 6,700 17,000 / 10,000 6,600 / 3,000Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 85 / 40 135 / 75 195 / 115 235 / 150 230 / 160 240 / 190 150 / 80 195 / 115 230 / 160 90 / 60Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 4.0 / 25 - / - - / - - / - - / - - / - - / - - / - - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 10 / > 50 3.5 / 6.5 3.0 / 5.0 3.0 / 3.5 3.0 / 3.5 2.5 / 2.1 3.0 / 7.0 3.0 / 5.0 3.0 / 3.5 3.0 / 7.0Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,800 / 1,000 8,400 / 4,500 8,400 / 5,200 12,000 / 3,500 15,500 / 8,500 19,700 / 14,400 5,700 / 2,800 8,400 / 5,200 15,500 / 8,500 6,300 / 3,000Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 115 / 40 181 / - 275 / 180 340 / 200 370 / 195 406 / 300 180 / 90 275 / 180 370 / 195 130 / 100

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB 70 / 95 85 / 95 103 / 130 105/130 110 / 130 50 / 90 85 / 95 105/130 - / --30 ºC ISO 179/1eU kJ/m2 - - 75 - - - 43 75 - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5 / 40 4.2 / 30 13 / 25 15 / 22 20 / 30 22 / 30 6.5 / 12 13 / 25 20/30 3.5 / 20-30 ºC ISO 179/1eA kJ/m2 4 - 10 - - - 5.0 10 - 3.0


Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 65 205 210 213 215 220 190 210 215 1600.45 MPa ISO 75-1/-2 ºC 187 215 215 215 215 220 215 215 215 -


ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.5 / 7.0 3.8 / 6.8 3.8 / 6.8 3.9 / 6.5 4.2 / 6.3 - 3.6 / 6.9 3.8 / 6.8 4.2 / 6.3 3.9 / 6.2Dissipation factor 1MHz ISO 60250 300 / 3,000 250 / 2,200 230 / 2,200 190 / 1,800 140 / 1,400 - 250 / 2,200 230 / 2,200 140 / 1,400 180 / 1,800Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Comparative tracking index ISO 60112 600 500 500 500 500 500 500 500 500 600

Unreinforced Glass fiber andmineral reinforced

Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Mineral reinforcedFood contact Food contact Food contact



19

HIGH FLOW PA6 HIGH FLOW PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B300 P B300 P2 G20 M15 B300 P2 G30 B300 P2 G40 B300 P2 G50 B300 P2 G60 B300 P2 GFC15 B300 P2 GFC30 B300 P2 GFC50 B300 P2 M40Density 23 ºC ISO 1183 g/cm3 1.13 1.42 1.36 1.46 1.56 1.69 1.22 1.36 1.56 1.45Viscosity Number 25 ºC ISO 307 cm3/g 100 100 100 100 100 - 100 - - 100Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.0 2.0 2.1 1.8 1.5 1.2 2.6 2.1 1.5 1.8Water absorption 23 ºC/saturation ISO 62 % 9.5 6.0 6.7 6.0 4.5 4.5 8.0 6.7 4.5 5.4Flammability 1.5 mm UL-94 Class V-2 HB HB HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 750 - - - - - - - - -Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 700 - - - - - - - - -

PROCESSING CONDITIONSMelt Volume rate 275 ºC / 5 kg ISO 1133 cm3/10min >300 100 90 57 37 35 135 90 35 300Melt temperature, injection moulding ºC 230 - 280 240 - 290 235 - 250 235 - 260 235 - 260 235 - 270 230 - 260 235 - 250 235- 280 250 - 290Mould temperature ºC 40 - 80 40 - 80 40 - 80 40 - 80 40 -80 40 - 80 40 - 80 40 - 80 40 - 80 40 -80

Mould Shrinkage longitudinal % 0.90 - 1.10 0.20 - 0.30 0.30 - 0.35 0.30 - 0.35 0.90 0.20 - 0.25 0.40 - 0.70 0.15 0.30 - 0.35 - / -transversal % 0.80 - 1.10 0.30 - 0.40 0.40 - 0.45 0.40 - 0.45 1.30 0.30 - 0.35 0.60 - 0.90 0.75 0.40 - 0.45 - / -

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 3,200 / 1,100 9,500 / 5,500 9,900 / 6,700 14,500 / 8,700 17,000 / 10,000 21,000 / 17,000 6,000 / 3,400 9,900 / 6,700 17,000 / 10,000 6,600 / 3,000Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 85 / 40 135 / 75 195 / 115 235 / 150 230 / 160 240 / 190 150 / 80 195 / 115 230 / 160 90 / 60Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 4.0 / 25 - / - - / - - / - - / - - / - - / - - / - - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 10 / > 50 3.5 / 6.5 3.0 / 5.0 3.0 / 3.5 3.0 / 3.5 2.5 / 2.1 3.0 / 7.0 3.0 / 5.0 3.0 / 3.5 3.0 / 7.0Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,800 / 1,000 8,400 / 4,500 8,400 / 5,200 12,000 / 3,500 15,500 / 8,500 19,700 / 14,400 5,700 / 2,800 8,400 / 5,200 15,500 / 8,500 6,300 / 3,000Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 115 / 40 181 / - 275 / 180 340 / 200 370 / 195 406 / 300 180 / 90 275 / 180 370 / 195 130 / 100

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB 70 / 95 85 / 95 103 / 130 105/130 110 / 130 50 / 90 85 / 95 105/130 - / --30 ºC ISO 179/1eU kJ/m2 - - 75 - - - 43 75 - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5 / 40 4.2 / 30 13 / 25 15 / 22 20 / 30 22 / 30 6.5 / 12 13 / 25 20/30 3.5 / 20-30 ºC ISO 179/1eA kJ/m2 4 - 10 - - - 5.0 10 - 3.0


Heat Deflection Temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 65 205 210 213 215 220 190 210 215 1600.45 MPa ISO 75-1/-2 ºC 187 215 215 215 215 220 215 215 215 -


ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.5 / 7.0 3.8 / 6.8 3.8 / 6.8 3.9 / 6.5 4.2 / 6.3 - 3.6 / 6.9 3.8 / 6.8 4.2 / 6.3 3.9 / 6.2Dissipation factor 1MHz ISO 60250 300 / 3,000 250 / 2,200 230 / 2,200 190 / 1,800 140 / 1,400 - 250 / 2,200 230 / 2,200 140 / 1,400 180 / 1,800Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Comparative tracking index ISO 60112 600 500 500 500 500 500 500 500 500 600

Unreinforced Glass fiber andmineral reinforced

Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Reinforced Mineral reinforcedFood contact Food contact Food contact



20


FLAME RETARDANT PA6 FLAME RETARDANT PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B15 U B30 U B30 P2 U0 B30 P2 U0 T B30 P2 M25 U2 B30 P2 G20 U0 B300 P2 G30 U0 B300 P2 G25 S2 U2 B300 P2 G30 S1 U2Density 23 ºC ISO 1183 g/cm3 1.13 1.13 1.18 1.17 1,35 1.36 1.40 1.36 1.41Viscosity number 25 ºC ISO 307 cm3/g 120 145 125 125 145 125 100 100 100Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.0 3.0 2.5 2.5 2.2 2.3 2.1 2.2 2.1Water absorption 23 ºC/saturation ISO 62 % 9.5 9.5 9.0 9.0 7.0 6.9 6.5 6.5 6.5Flammability 1.5 mm UL-94 Class V-2 V-2 V-0 V-0 V-2 V-0 V-0 V-2 V-2Glow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 960 960 960 960 960 960 960 960 960Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 750 775 775 775 725 775 775 775 775

PROCESSING CONDITIONSMelt volume rate 275 ºC / 5 kg ISO 1133 cm3/10min 260 145 145 - - - - -Melt temperature, injection moulding ºC 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270Mould temperature ºC 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80

Mould shrinkage longitudinal % 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.20 - 0.50 0.20 - 0.50 0.20 - 0.50 0.20 - 0.50transversal % 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.70 - 0.90 0.70 - 0.90 0.70 - 0.90 0.70 - 0.90

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 3,300 / 1,100 3,300 / 1,100 3,800 / 1,500 3,600 / - 6,000 / - 8,300 / 5,000 9,900 / 6,500 5,400 / - 7,900 / -Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 85 / 40 85 / 40 85 / 40 85/- 75 / - 95 / 40 160 / 110 76 / - 95 / -Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 25 3.5 / 25 3.5 / 25 3.7/- - - - - -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 18 / >50 18 / >50 9 / >50 9.0 /- 3.0 / - 2.5 / 5.0 3.3 / 6.0 3.3 / - 3.0 / -Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,800 / 1,000 2,800 / 1,000 3,400 / 1,200 3,200 / - 5,200 / - 7,200 / 3,500 9,300 / 5,800 4,200 / - 7,500 / -Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 110 / 30 110 / 30 116 / 50 110 /- 115 / - 180 / 90 140 / 80 100 / - 130 / -

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB NB / NB 60 / - 120 /- 30 / - 60 / 80 70 / 95 35 / - 38 / --30 ºC ISO 179/1eU kJ/m2 320 - 55 90 /- - - - - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5.0 / 30 5.0 / 30 3.0 / 18 5.0 /- 3.0 / - 6.5 / 25 6.5 / 20 2.5 / - 3.3 / --30 ºC ISO 179/1eA kJ/m2 4.5 - - - - - - - -

THERMAL PROPERTIESMelting temperature (DSC) 10 ºC/min ISO 3146 ºC 222 222 222 222 222 222 220 221 221

Heat deflection temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 65 65 80 80 150 200 211 180 2000.45 MPa ISO 75-1/-2 ºC 187 187 200 200 - - - - -

Thermal coefficient of linear expasion 23-80 ºC long. ISO 11359-1/-2 10-4/k 0.70 0.70 0.90 0.90 0.20 0.20 0.20 0.20 0.2023-80 ºC transv. ISO 11359-1/-2 10-4/k 1.00 1.00 0.90 0.90 0.60 0.60 0.60 0.60 0.60

ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.5 / 7.0 3.5 / 7.0 3.5 / 7 3.5 / 7 3.7 / 6.8 3.7 / 6.8 3.7 / 6.8 3.7 / 6.8 3.7 / 6.8Dissipation factor 1MHz ISO 60250 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 230 / 2,200 230 / 2,200 230 / 2,200 230 / 2,200 230 / 2,200Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Comparative tracking index ISO 60112 600 600 600 600 525 600 600 600 600

Unreinforced Unreinforced Unreinforced Unreinforced Mineral reinforced Reinforced Reinforced Reinforced ReinforcedHalogen free Halogen free Halogen free Halogen free Halogen free Halogen free Halogen free Halogen free Halogen free

Improved impact res. High flow High flow High flowImproved finish surface Improved finish surface


21

FLAME RETARDANT PA6 FLAME RETARDANT PA6PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B15 U B30 U B30 P2 U0 B30 P2 U0 T B30 P2 M25 U2 B30 P2 G20 U0 B300 P2 G30 U0 B300 P2 G25 S2 U2 B300 P2 G30 S1 U2Density 23 ºC ISO 1183 g/cm3 1.13 1.13 1.18 1.17 1,35 1.36 1.40 1.36 1.41Viscosity number 25 ºC ISO 307 cm3/g 120 145 125 125 145 125 100 100 100Moisture absorption 23 ºC/50% r.h. ISO 62 % 3.0 3.0 2.5 2.5 2.2 2.3 2.1 2.2 2.1Water absorption 23 ºC/saturation ISO 62 % 9.5 9.5 9.0 9.0 7.0 6.9 6.5 6.5 6.5Flammability 1.5 mm UL-94 Class V-2 V-2 V-0 V-0 V-2 V-0 V-0 V-2 V-2Glow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC 960 960 960 960 960 960 960 960 960Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC 750 775 775 775 725 775 775 775 775

PROCESSING CONDITIONSMelt volume rate 275 ºC / 5 kg ISO 1133 cm3/10min 260 145 145 - - - - -Melt temperature, injection moulding ºC 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270 250 - 270Mould temperature ºC 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80 40 - 80

Mould shrinkage longitudinal % 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.90 - 1.10 0.20 - 0.50 0.20 - 0.50 0.20 - 0.50 0.20 - 0.50transversal % 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.80 - 1.10 0.70 - 0.90 0.70 - 0.90 0.70 - 0.90 0.70 - 0.90

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 3,300 / 1,100 3,300 / 1,100 3,800 / 1,500 3,600 / - 6,000 / - 8,300 / 5,000 9,900 / 6,500 5,400 / - 7,900 / -Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 85 / 40 85 / 40 85 / 40 85/- 75 / - 95 / 40 160 / 110 76 / - 95 / -Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 25 3.5 / 25 3.5 / 25 3.7/- - - - - -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 18 / >50 18 / >50 9 / >50 9.0 /- 3.0 / - 2.5 / 5.0 3.3 / 6.0 3.3 / - 3.0 / -Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 2,800 / 1,000 2,800 / 1,000 3,400 / 1,200 3,200 / - 5,200 / - 7,200 / 3,500 9,300 / 5,800 4,200 / - 7,500 / -Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 110 / 30 110 / 30 116 / 50 110 /- 115 / - 180 / 90 140 / 80 100 / - 130 / -

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB NB / NB 60 / - 120 /- 30 / - 60 / 80 70 / 95 35 / - 38 / --30 ºC ISO 179/1eU kJ/m2 320 - 55 90 /- - - - - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 5.0 / 30 5.0 / 30 3.0 / 18 5.0 /- 3.0 / - 6.5 / 25 6.5 / 20 2.5 / - 3.3 / --30 ºC ISO 179/1eA kJ/m2 4.5 - - - - - - - -

THERMAL PROPERTIESMelting temperature (DSC) 10 ºC/min ISO 3146 ºC 222 222 222 222 222 222 220 221 221

Heat deflection temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 65 65 80 80 150 200 211 180 2000.45 MPa ISO 75-1/-2 ºC 187 187 200 200 - - - - -

Thermal coefficient of linear expasion 23-80 ºC long. ISO 11359-1/-2 10-4/k 0.70 0.70 0.90 0.90 0.20 0.20 0.20 0.20 0.2023-80 ºC transv. ISO 11359-1/-2 10-4/k 1.00 1.00 0.90 0.90 0.60 0.60 0.60 0.60 0.60

ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.5 / 7.0 3.5 / 7.0 3.5 / 7 3.5 / 7 3.7 / 6.8 3.7 / 6.8 3.7 / 6.8 3.7 / 6.8 3.7 / 6.8Dissipation factor 1MHz ISO 60250 300 / 3,000 300 / 3,000 300 / 3,000 300 / 3,000 230 / 2,200 230 / 2,200 230 / 2,200 230 / 2,200 230 / 2,200Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Surface resistivity ISO 60093 Ω 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Comparative tracking index ISO 60112 600 600 600 600 525 600 600 600 600

Unreinforced Unreinforced Unreinforced Unreinforced Mineral reinforced Reinforced Reinforced Reinforced ReinforcedHalogen free Halogen free Halogen free Halogen free Halogen free Halogen free Halogen free Halogen free Halogen free

Improved impact res. High flow High flow High flowImproved finish surface Improved finish surface



22

PA6 WEIGHT REDUCTION PA6 WEIGHT REDUCTION POLYAMIDE 66PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B30 NC100 B30 P2 G25 WR B300 P2 NFC30 B300 P2 G16 HB M15 A30 P2 G15 A30 P2 G30 A30 P2 G40 A30 P2 G50Density 23 ºC ISO 1183 g/cm3 1.14 1.22 1.20 1.29 1.23 1.35 1.46 1.57Viscosity number 25 ºC ISO 307 cm3/g 132 - 100 100 150 150 150 120Moisture absorption 23 ºC/50% r.h. ISO 62 % 2.3 1.6 - 2.0 2.6 1.9 1.5 1.2Water absorption 23 ºC/saturation ISO 62 % 7.0 5.0 - 6.0 8.0 6.0 5.0 4.0Flammability 1.5 mm UL-94 Class V-2 HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - -Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - -

PROCESSING CONDITIONSMelt Volume rate 275 ºC / 5 kg ISO 1133 cm3/10min 145 25 22* 100 60 40 25 30Melt temperature, injection moulding ºC 250 - 270 260 - 290 230 -2 40 240 - 290 270 - 300 270 - 300 280 - 300 280 - 300Mould temperature ºC 20 - 80 40 - 80 40 - 80 40 - 80 60 - 90 60 - 90 60 - 90 60 - 95

Mould shrinkage longitudinal % 0.70 - 0.85 0.30 - 0.40 - / - 0.15 - 0.30 0.45 - 0.75 0.20 - 0.40 0.10 - 0.30 0.10 - 0.30transversal % 0.80 - 0.90 0.40 - 0.50 - / - 0.25 - 0.40 0.64 - 0.94 0.40 - 0.50 0.15 - 0.35 0.15 - 0.35

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 4,000 / 2,000 7,600 / 5,700 4,100 / - 9,200 / 5,200 5,500 / 3,500 9,500 / 7,500 13,000 / 8,500 17,000 / 11,000Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 100 / 52 130 / 90 70/- 130 / 75 120 / 80 190 / 130 210 / 150 250 / 190Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 25 - / - - / - - / - - / - - / - - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 4.0 / >25 3.1 / 4.5 2.0 / - 3.5 / 6.5 3.0 / 7.0 3.0 / 5.0 2.5 / 3.5 2.5 / 3.5Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 3,500 / 1,400 6,500 / 4,500 3,600 / - 8,000 / 4,300 4,500 / 2,500 9,000 / 6,500 12,000 / 7,500 16,000 / 10,500Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 130 / 70 170 / 125 100 / - 175 / - 160 / 100 280 / 160 300 / 190 360 / 230

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB 75 / 85 22 / - 70 / 95 80 / 100 80 / 100 95 / 100 95 / 100-30 ºC ISO 179/1eU kJ/m2 - - - - - - - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 4.3 / 10 12 / 30 2 / - 4.0 / 30 8.0 / 15 10 / 25 13.5 / 20 16 / 20-30 ºC ISO 179/1eA kJ/m2 - - - - - - - -

THERMAL PROPERTIESMelting temperature (DSC) 10 ºC/min ISO 3146 ºC 222 220 222 222 260 260 260 260

Heat deflection temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 100 200 120 205 250 250 255 2550.45 MPa ISO 75-1/-2 ºC 195 215 - 215 250 250 260 260

Thermal coefficient of linear expasion 23-80 ºC long. ISO 11359-1/-2 10-4/k 0.30 0.20 - 0.20 - - - -23-80 ºC transv. ISO 11359-1/-2 10-4/k 0.80 0.60 - 0.60 - - - -

ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.6 / 6.5 4 .0 / 7.0 - 3.8 / 6.8 - - - -Dissipation factor 1MHz ISO 60250 250 / 2,500 240 / 2,200 - 250 / 2,200 - - - -Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 - 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Surface resistivity ISO 60093 Ω 1014 / 1011 1013 / 1010 - 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Comparative tracking index ISO 60112 550 550 - 550 600 600 575 550

Nanoclay fortified Reinforced Natural fiber reinforced Reinforced Reinforced Reinforced Reinforced ReinforcedHigh flow High flow

(1) NB: No break. | * dry = dry as moulded / cond. = conditioned according to ISO 1110

PROMYDE® PROPERTIESPOLYAMIDE 6 & 66

23

PA6 WEIGHT REDUCTION PA6 WEIGHT REDUCTION POLYAMIDE 66PHYSICAL PROPERTIES CONDITIONS TEST METHOD UNIT B30 NC100 B30 P2 G25 WR B300 P2 NFC30 B300 P2 G16 HB M15 A30 P2 G15 A30 P2 G30 A30 P2 G40 A30 P2 G50Density 23 ºC ISO 1183 g/cm3 1.14 1.22 1.20 1.29 1.23 1.35 1.46 1.57Viscosity number 25 ºC ISO 307 cm3/g 132 - 100 100 150 150 150 120Moisture absorption 23 ºC/50% r.h. ISO 62 % 2.3 1.6 - 2.0 2.6 1.9 1.5 1.2Water absorption 23 ºC/saturation ISO 62 % 7.0 5.0 - 6.0 8.0 6.0 5.0 4.0Flammability 1.5 mm UL-94 Class V-2 HB HB HB HB HB HB HBGlow wire flammability index 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - -Glow wire ignitability temperature 1.5 mm IEC 60695-2-12,12 ºC - - - - - - - -

PROCESSING CONDITIONSMelt Volume rate 275 ºC / 5 kg ISO 1133 cm3/10min 145 25 22* 100 60 40 25 30Melt temperature, injection moulding ºC 250 - 270 260 - 290 230 -2 40 240 - 290 270 - 300 270 - 300 280 - 300 280 - 300Mould temperature ºC 20 - 80 40 - 80 40 - 80 40 - 80 60 - 90 60 - 90 60 - 90 60 - 95

Mould shrinkage longitudinal % 0.70 - 0.85 0.30 - 0.40 - / - 0.15 - 0.30 0.45 - 0.75 0.20 - 0.40 0.10 - 0.30 0.10 - 0.30transversal % 0.80 - 0.90 0.40 - 0.50 - / - 0.25 - 0.40 0.64 - 0.94 0.40 - 0.50 0.15 - 0.35 0.15 - 0.35

MECHANICAL PROPERTIES (dry/cond.)*Tensile modulus 23 ºC, 1 mm/min ISO 527-1/-2 MPa 4,000 / 2,000 7,600 / 5,700 4,100 / - 9,200 / 5,200 5,500 / 3,500 9,500 / 7,500 13,000 / 8,500 17,000 / 11,000Tensile strength 23 ºC, 50 mm/min ISO 527-1/-2 MPa 100 / 52 130 / 90 70/- 130 / 75 120 / 80 190 / 130 210 / 150 250 / 190Elongation at yield 23 ºC, 50 mm/min ISO 527-1/-2 % 3.5 / 25 - / - - / - - / - - / - - / - - / - - / -Elongation at break 23 ºC, 50 mm/min ISO 527-1/-2 % 4.0 / >25 3.1 / 4.5 2.0 / - 3.5 / 6.5 3.0 / 7.0 3.0 / 5.0 2.5 / 3.5 2.5 / 3.5Flexural modulus 23 ºC, 2 mm/min ISO 178 MPa 3,500 / 1,400 6,500 / 4,500 3,600 / - 8,000 / 4,300 4,500 / 2,500 9,000 / 6,500 12,000 / 7,500 16,000 / 10,500Flexural strength 23 ºC, 2 mm/min ISO 178 MPa 130 / 70 170 / 125 100 / - 175 / - 160 / 100 280 / 160 300 / 190 360 / 230

Charpy unnotched impact strength (1) 23 ºC ISO 179/1eU kJ/m2 NB / NB 75 / 85 22 / - 70 / 95 80 / 100 80 / 100 95 / 100 95 / 100-30 ºC ISO 179/1eU kJ/m2 - - - - - - - -

Charpy notched impact strength 23 ºC ISO 179/1eA kJ/m2 4.3 / 10 12 / 30 2 / - 4.0 / 30 8.0 / 15 10 / 25 13.5 / 20 16 / 20-30 ºC ISO 179/1eA kJ/m2 - - - - - - - -

THERMAL PROPERTIESMelting temperature (DSC) 10 ºC/min ISO 3146 ºC 222 220 222 222 260 260 260 260

Heat deflection temperature (HDT) 1.8 MPa ISO 75-1/-2 ºC 100 200 120 205 250 250 255 2550.45 MPa ISO 75-1/-2 ºC 195 215 - 215 250 250 260 260

Thermal coefficient of linear expasion 23-80 ºC long. ISO 11359-1/-2 10-4/k 0.30 0.20 - 0.20 - - - -23-80 ºC transv. ISO 11359-1/-2 10-4/k 0.80 0.60 - 0.60 - - - -

ELECTRICAL PROPERTIES (dry/cond.)* Dielectric constant 1MHz ISO 60250 3.6 / 6.5 4 .0 / 7.0 - 3.8 / 6.8 - - - -Dissipation factor 1MHz ISO 60250 250 / 2,500 240 / 2,200 - 250 / 2,200 - - - -Volume resistivity ISO 60093 Ω.m 1013 / 1010 1013 / 1010 - 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Surface resistivity ISO 60093 Ω 1014 / 1011 1013 / 1010 - 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010 1013 / 1010

Comparative tracking index ISO 60112 550 550 - 550 600 600 575 550

Nanoclay fortified Reinforced Natural fiber reinforced Reinforced Reinforced Reinforced Reinforced ReinforcedHigh flow High flow

(1) NB: No break. | * dry = dry as moulded / cond. = conditioned according to ISO 1110 Values have been established by standard tests. The data should be considered as a guide and not as binding minimum values. Because may factors affect processing or applications, we recommend that individual tests are performed to determine the suitability of the product use.

PROMYDE® is a trade mark of NUREL ENGINEERING POLYMERS.All information and material included on this document do not have a contractual nature.

2020, NUREL. S.A. Any reproduction, of all or part of this document is expressly prohibited.For the latest version of the data published on this document please refer to polymers.nurel.com

Ctra. Barcelona km 32950016 Zaragoza Spain

Tel.: +34 976 465 579 Fax: +34 976 574 108polymers.nurel.com

Date post:	25-Feb-2020
Category:	Documents
Upload:	others
View:	8 times
Download:	0 times

POLYAMIDE 6 & 66 FOR INJECTION MOULDING...2 Polymerization Integrated into In-House Compounding 50...

Documents