10
POLYPROPYLENE PIPING SYSTEM (PP-RCT) Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Est.
POLYPROPYLENEPIPING SYSTEM (PP-RCT)
Plastic Pipes & Fittings FactoryYousif Khalid Al-Adasani Est.
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
3
PP-RCT Pressure Piping System
Material :
PP-RCT is Polypropylene random copolymer with modified Crystallinity structure and elevated temperature resistance.
Manufacturing standards :
DIN 8077, DIN 8078, DIN EN ISO/ BS EN ISO 15874
Major advantages of Al-Adasani PP-RCT Piping system
• High chemical resistance
• Internal/ External corrosion resistance
• Non-toxic and resistant to microbiological attack
• Low friction loss
• Light weight end easy installation
• Has got good insulating properties (Low thermal conductivity)
Application field
• Drinking water systems
• Service Hot & Cold water systems
• Industrial projects
• Agricultural projects
• Central heating system
• House Connections
General properties of PP-RCT material
Properties PP-RCT UnitDensity ≈ 0.905 g/cm3
Mean Coefficient of Linear ≤ 1.5 ×10-4 K-1
Thermal Expansion Vicat Softening Temperature ≥ 125 Co
Thermal Conductivity ≈ 0.24 W/ K. MModulas of Elasticity ≈ 900 N/mm2
Tenstile Strength ≥ 24 MPa
Heat Reversion < 2% -
Impact Resistance Complies with DIN 8078 -
Surface Resistance ≥1012 Ω
4
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
d : outside diameters : wall thicknessmeasurements in mm
008 Excluding Design
008 Excluding Design
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
5
WELDING SOCKET(COCT)
WELDING ELBOW(BECG 900)
WELDING ELBOW(BECH 450)
WELDING TEE(TECT)
Dmm
Lmm
Zmm
20 32 325 35 332 43 340 43 350 52 463 61 675 73 690 73 6110 84 8
Dmm
Lmm
Zmm
20 29 1425 33 1732 40 2140 47 2650 51 2863 60 3275 59 2890 79 46110 94 58
Dmm
Lmm
Zmm
20 22 425 26 732 30 940 34 1250 34 1263 42 1475 46 1690 65 35110 74 42
Dmm
L1mm
L2mm
Zmm
20 54 27 1225 63 31 1332 75 38 1640 86 44 2150 105 52 2663 122 62 3375 139 70 3990 159 82 49110 179 94 59
PP-RCT Pipes Fittings PN : 25 bars
DIN EN ISO/ BS EN ISO 15874
6
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
REDUCED WELDING TEE(TRCT)
REDUCED WELDING SOCKET(RECT)
D1mm
D2mm
L1mm
L2mm
Z1mm
Z2mm
Z3mm
25 20 62 31 13 13 1332 20 75 38 17 22 1732 25 75 38 17 20 1740 20 86.5 40.0 21.4 21.0 21.440 25 86.5 38.25 21.4 21.25 21.440 32 86 44 21 25 2150 20 104 42.8 25.5 26.8 25.350 25 105 52 33 35 3350 32 105 52 33 33 3363 25 126 49.5 34 31.5 3463 32 126 55.5 34 36.4 3463 40 126 54.5 34 31.5 3463 50 126 57.5 34 32.5 3475 25 144 58 39.5 38.5 39.575 32 144 60 39.5 38 39.575 40 145 59.5 40.0 35.0 40.075 50 144 62 39.5 35.0 39.575 63 144 65 39.5 34.5 39.5
D1mm
D2mm
Lmm
Zmm
25 20 39 2332 20 42 2632 25 43 2640 20 50 3040 25 50 3040 32 50 3050 20 55 3550 25 55 3550 32 55 3750 40 54 3463 25 65 4863 32 65 4563 40 65 4463 50 72 4575 32 65 4575 40 67 4575 50 68 4375 63 72 4490 40 65 4190 50 76 5190 63 79 5190 75 82 52110 63 88 60110 75 92 60110 90 95 63
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
7
WELDING END CAP(EPCT)
Dmm
Lmm
20 2525 2832 3340 3850 4663 5575 5890 68
WELDING ELBOW ADAPTOR,(FEMALE THREAD (ABCT)
WELDING TEE ADAPTORFEMALE THREAD (ATCT)
FEMALE ADAPTOR(FACT)
Dmm
RInch
tmm
Z1mm
Z2mm
Lmm
20 1/2" 18 11 20 3520 3/4" 18 17 24 3925 1/2" 20 15 24 3925 3/4" 20 15 24 3932 3/4" 18 12 32 6632 1" 18 12 32 66
Dmm
RInch
tmm
Zmm
20 1/2" 16 2520 3/4" 18 2525 1/2" 16 2625 3/4" 18 2532 3/4" 20 4032 1" 20 4040 11/4" 20 4650 11/2" 24 4663 2" 28 48
8
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
SLANTED SEAT VALVE(GVCT)
Dmm
tmm
Zmm
Lmm
25 16 86 118
32 18 82 118
MALE ADAPTOR(MACT)
Dmm
RInch
tmm
Zmm
20 1/2" 16 2520 3/4" 18 2525 1/2" 16 2625 3/4" 18 2532 3/4" 20 3732 1" 20 3740 11/4" 20 4550 11/2" 24 4263 2" 28 5275 21/2" 29 50
STEP-OVER BEND(SOCT)
Dmm
Hmm
h1mm
h2mm
L1mm
Lmm
20 46 28.2 24 15.5 160
25 58.0 35 32 22 201
32 66 43 34.5 22.5 172
40 82 53 43 21.5 240
WELDING UNION PP-RCT TO BRASS(UBCT)
Dmm
RInch
tmm
Zmm
20 3/4" 16 4425 3/4" 16 4432 1" 19 4540 11/4" 21 4850 11/2" 24 5463 2" 30 60
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
9
Welding plug for repair of holesup to ø8mm
WARH WAPL
assembly plug for gauge ”1/2
Backing Ring, ODBC
Note: The Backing Ring is made from C-PVC, black
Flange Adapter, QRCT
Pipe out side diameter, mm
50637590110
d2
6176.390
109.2130
b
1315
17.117.118
d1
48.861.973.688.8
108.5
50637590110
d3637892110133
40506580100
Nominal flange size D
152168187
202.5220
K
110125145160180
d41818181818
Number of bolts
44488
Pipe out side diameter, mm
CONCEALED / SHUT OFF VALVE(CVCT)
Dmm
RInch
tmm
Zmm
Lmm
20 3/4" 15 66 96
25 3/4" 16 64 96
32 1" 18 80 116
40 1" 21 73 115
GATE VALVE(TGCT)
Dmm
RInch
tmm
Zmm
Lmm
20 3/4" 15 66 96
25 3/4" 16 64 96
32 1" 18 80 116
40 1" 21 73 115
Dimensions in mm
Dimensions in mm
20
Plastic Pipes & Fittings Factory Yousif Khalid Al-Adasani Ent.
Plastic Pipes & Fittings FactoryYousif Khalid Al-Adasani Est.
P.O. Box 1653, 13017 SAFAT, KUWAIT /Sabhan Industrial Area Cable: YOUKADSAN
Telephone: 24743800 - 24743801 - 24730225 - 24730226 - 24714870Fax: 24718258 - 24764115
Website: www.aladasani.com - Email: [email protected], [email protected]
01/1
7
