Qty Item Description Bill No. 09 ELECTRICAL INSTALLATIONS PROVISIONAL SUM A B C 50 Allow for liaising with QGEWC (Kahramaa) and co-ordinate with Kahramaa approved contractor for the execution of scheme No.0018-0074- 2010 under the supervision of Kahramaa Engineer including procurement, installation, testing & commissioning of Kahramaa supplied 11kv H.V switchgear at H.V. Room in substation, procurement of 11kv cable from Kahramaa and laying the same from Kaharmaa network to H.V. switchgear and H.V.switchgear to 2 nos of Transformers including termination at both ends, procurement and laying of single core M.V.cables from Transformers to M.V.panels including termination at both ends and energization of the complete system to the approval of Kahramaa Engineer including all the related builders work. Allow for liaising with QGEWC (Kahramaa) and co-ordinate with Kahramaa for obtaining approval of scheme No.0018-0074-2010, execution of scheme; complete with all fees to Kahramaa for obtaining power supply to the premises. Electrical KW/Hr meter (calibrated by KAHRA-MAA) including all necessary termination, glands; all as specified and in compliances KAHRAMAA regulations for every individual flats.
Transcript
QtyItem Description
Bill No. 09
ELECTRICAL INSTALLATIONS
PROVISIONAL SUM
A
B
C
50
Allow for liaising with QGEWC (Kahramaa) and co-ordinate with Kahramaa approved contractor for the execution of scheme No.0018-0074-2010 under the supervision of Kahramaa Engineer including procurement, installation, testing & commissioning of Kahramaa supplied 11kv H.V switchgear at H.V. Room in substation, procurement of 11kv cable from Kahramaa and laying the same from Kaharmaa network to H.V. switchgear and H.V.switchgear to 2 nos of Transformers including termination at both ends, procurement and laying of single core M.V.cables from Transformers to M.V.panels including termination at both ends and energization of the complete system to the approval of Kahramaa Engineer including all the related builders work.
Allow for liaising with QGEWC (Kahramaa) and co-ordinate with Kahramaa for obtaining approval of scheme No.0018-0074-2010, execution of scheme; complete with all fees to Kahramaa for obtaining power supply to the premises.
Electrical KW/Hr meter (calibrated by KAHRA-MAA) including all necessary termination, glands; all as specified and in compliances KAHRAMAA regulations for every individual flats.
To Collection QR.
Item Description Qty
MAIN AND SUBMAIN INSTALLATIONS
A
2
Note : The works included hereunder shall comprise supply, installation, testing, comissioning and setting to work for all items which are necessary for a complete operational system as outlined in the Drawings and in the specifications.
Dry type transformers as per specifications and Kahramaa approval; supply, install and commission as per Kahramaa regulations including all accessories to the approval of Engineer at site
Dry type Transformer: 1600 KVA, 11 KV/0.433 K.V., DYN 11, 50 Hz step down
To Collection QR.
Item Description Qty
Medium Voltage Switch Board complete as described including all erection ,inter connection and instrumentation as shown in Drawing No. 1613-EL-B1-6-005 SHT.01 OF 01.
A
1
B 1250 amp TP ACB outgoing 2
C 200 amp TP MCCB outgoing 2
D 40 amp TP MCCB outgoing 1
MV Panel - 1 : 6 way TPN, complete with 2500 amp withdrawable type 3P motorized ACB with S/C+O/C release with 30V DC shunt trip with Low Voltage/High Voltage trip facility for incoming(Kahramaa) supply, 2500 amp withdrawable type 4P motorized ACB with S/C+O/C release with 30V DC shunt trip for Generator incomer, 2500 amp 4P+E copper bus bar (Fault rating 44ka for 3 seconds & comply with IEC 439-1/1999) , include for metering kits, CT's, selector switches, earth fault relays, indication lamp, trunking, ammeters,voltmeter, frequncy metre,control fuse, battery & battery charger etc (Form 3B-Type 2) with:
To Collection QR.
Item Description Qty
A
1
B 630AF/500AT amp TP MCCB outgoing 3
C 400 amp TP MCCB outgoing 1
D 200 amp TP MCCB outgoing 1
E 63 amp TP MCCB outgoing 3
F 40 amp TP MCCB outgoing 2
Medium Voltage Switch Board complete as described including all erection ,inter connection and instrumentation as shown in Drawing No. 1613-EL-B1-6-006 SHT.01 OF 01.
MV Panel - 1 : 12 way TPN, complete with 2500 amp withdrawable type 3P motorized ACB with S/C+O/C release with 30V DC shunt trip with Low Voltage/High Voltage trip facility for incoming(Kahramaa) supply, 2500 amp withdrawable type 4P motorized ACB with S/C+O/C release with 30V DC shunt trip for Generator incomer, 2500 amp 4P+E copper bus bar (Fault rating 44ka for 3 seconds & comply with IEC 439-1/1999) , include for metering kits, CT's, selector switches, earth fault relays, indication lamp, trunking, ammeters,voltmeter, frequncy metre,control fuse, battery & battery charger etc (Form 3B-Type 2) with:
To Collection QR.
Item Description Qty
A
1
B
1
1
C 33KVA diesel generator set
D
1
Capacitor Bank with all the necessery incoming & outgoing terminals, controls and all associated accessories as required.
Automatic Power Factor control Capacitor Bank - 250 KVAR,Cubicle type.Floor Standing with 400 Amp MCCBB with Harmonic filtering
Automatic Power Factor control Capacitor Bank - 100 KVAR,Cubicle type.Floor Standing with 200 Amp MCCBB with Harmonic filtering
Diesel driven Generators, skid mounted complete with control panel, frequency meter,starting batteries, charger, residential silencers, exhaust system, instrumentation, automatic Transfer switch and all other associated accessories as specified ;
Diesel tank as approved by WOQOOD installed including all necessary accessories as specified and as shown..
To Collection QR.
Item Description Qty
End feed type bus duct; copper conductor with extruded aluminium housing and side flange confirm to BS EN 60439 and BS EN 60529; complete with universal brackets, expansion fittings, fire barrier, automatic safety shutter, joint coupler, flange end, bends, connector etc. including all accessories and fixing support as specified and shown on drawing 1613-EL-B1-6-007 SHT 1 OF 1.
A
44
B
50
To Collection QR.
Bus Bar riser-1, 1250 amp 4P + E bus bar riser serving SMB-4 & SMB-5 from MV panel-1; complete with 2 nos of 630AF/ 500AT and 400Amps Tap off units, connectors, end feed point including all terminations, connection etc. with associated trunking and all other accessories.
Bus Bar riser-2, 1250 amp 4P + E bus bar riser serving SMB-4 & SMB-5 from MV panel-1; complete with 2 nos of 400Amps Tap off units, connectors, end feed point including all terminations, connection etc. with associated trunking and all otheraccessories.
Item Description Qty
A 1
B 100 amp TP MCCB outgoing 8
C 1
D 100 amp TP MCCB outgoing 8
E 1
F 100 amp TP MCCB outgoing 8
G 1
H 100 amp TP MCCB outgoing 8
Supply & install Distribution Panels in dust and vermin proof enclosure, including bus bars, main incoming and outgoing moulded case interrupter/circuit breakers, instrumentation, fuses, switches, motor controllers, shutdown contactors, earthing, fixing bracket and all necessary provisions for incoming and outgoing cable terminations etc.; all as specified including support frame. as detailed on Drawing No. Q1613-EL-B1-6- 003SHT 001 OF 001.
10 way-3 phase Main Switch Board Ref SMB-1 with 630 amp TP MCCB for incoming supply, 630 amp 4P+E copper bus bar and 630 amp / 5 amp metering kit with :
10 way-3 phase Main Switch Board Ref SMB-2 with 630 amp TP MCCB for incoming supply, 630 amp 4P+E copper bus bar and 630 amp / 5 amp metering kit with :
10 way-3 phase Main Switch Board Ref SMB-3 with 630 amp TP MCCB for incoming supply, 630 amp 4P+E copper bus bar and 630 amp / 5 amp metering kit with :
10 way-3 phase Main Switch Board Ref SMB-4 with 630 amp TP MCCB for incoming supply, 630 amp 4P+E copper bus bar and 630 amp / 5 amp metering kit with :
To Collection QR.
Item Description Qty
A 1
B 100 amp TP MCCB outgoing 5
C 1
D 100 amp TP MCCB outgoing 5
E 1
Supply & install Distribution Panels in dust and vermin proof enclosure, including bus bars, main incoming and outgoing moulded case interrupter/circuit breakers, instrumentation, fuses, switches, motor controllers, shutdown contactors, earthing, fixing bracket and all necessary provisions for incoming and outgoing cable terminations etc.; all as specified including support frame. as detailed on Drawing No. Q1613-EL-B1-6- 003 SHT 001 OF 001.
8 way-3 phase Sub Main Board Ref SMB-5 with 400amp TP MCCB for incoming supply, 400 amp 4P+E copper bus bar and 400 amp / 5 amp metering kit with :
8 way-3 phase Sub Main Board Ref SMB-6 with 400amp TP MCCB for incoming supply, 400 amp 4P+E copper bus bar and 400 amp / 5 amp metering kit with :
8 way-3 phase Sub Main Board Ref SMB-7 with 400amp TP MCCB for incoming supply, 400 amp 4P+E copper bus bar and 400 amp / 5 amp metering kit with :
F 100 amp TP MCCB outgoing 5
G 1
H 100 amp TP MCCB outgoing 5
To Collection QR.
Item Description Qty
A 1
8 way-3 phase Sub Main Board Ref SMB- FAN with 63amp TP MCCB for incoming supply, 63 amp 4P+E copper bus bar,provission for ATS and 63 amp / 5 amp metering kit with :
Supply & install Distribution Panels in dust and vermin proof enclosure, including bus bars, main incoming and outgoing moulded case interrupter/circuit breakers, instrumentation, fuses, switches, motorcontrollers, shutdown contactors, earthing, fixing bracket and all necessary provisions for incoming and outgoing cable terminations etc.; all as specified including support frame. as detailed on Drawing No. 1613-EL-B1-6- 004 SHT 1 OF1.
10 way-3 phase Sub Main Board Ref SMB- LL with 200amp TP MCCB for incoming supply, 200 amp 4P+E copper bus bar and 200 amp / 5 amp metering kit with :
B 100 amp TP MCCB outgoing 1
C 40 amp TP MCCB outgoing 4
D 40 amp SP MCCB outgoing 7
To Collection QR.
Item Description Qty
A 16
B 12
C 16
D 6
Supply & install Lighting/power panel boards in dust and vermin proof enclosure, complete with bus bars, incoming MCCB with outgoing MCB's,ELCB's and spare MCB's as shown on Drwg. QDC 1613-EL-B1-6-001 including connection, fixing accessories, earthing etc.
12 way TPN distribution board, Ref. DB-1, located in Flat No.3/4/7/8 ON 1st, 2nd, 3rd and 4th floors with 100 Amp TP isolator for incoming supply
12 way TPN distribution board, Ref. DB-5, located in Flat No.1/2/4/5 ON 5th, 6th, and 7th floors with 100 Amp TP isolator for incoming supply
8 way TPN distribution board, Ref. DB-1, located in Flat No.1/2/5/6 ON 1st, 2nd, 3rd and 4th floors with 63 Amp TP isolator for incoming supply
10 way TPN distribution board, Ref. DB-5, located in Flat No.3 and 6 ON 5th, 6th, and 7th floors with 100 Amp TP isolator for incoming supply
To Collection
Item Description Qty
A 1
B 1
C 1
D 1
E 1
F 7
Supply & install Lighting/power panel boards in dust and vermin proof enclosure, complete with bus bars, incoming MCCB with outgoing MCB's, ELCB's and spare MCB's as shown on Drwg. QDC 1613-EL-B1-6-002 including connection, fixing accessories, earthing etc.
12 way TPN distribution board, Ref. DB-G- LL, located in ground floor Electrical room with 40 Amp TP isolator for incoming supply
6 way TPN distribution board, Ref. DB-B, located in basement lobby with 40 Amp TP isolator for incoming supply
6 way TPN distribution board, Ref. DB-Q, located in Q-tel room with 100 Amp TP isolator for incoming supply
6 way TPN distribution board, Ref. DB- ROOF, located in lift machine room with 40 Amp TP isolator for incoming supply
4 way TPN distribution board, Ref. DB-MV , located in MV room with 40 Amp TP isolator for incoming supply
8 way SPN distribution board, Ref. DB- LL1to LL7 located in 1st, to 7th floors with 40 Amp SP isolator for incoming supply
G 7
To Collection QR.
Item Description Qty
POWER CABLES.
A 69
B 69
8 way SPN distribution board, Ref. DB-HV located in HV room with 40 Amp SP isolator for incoming supply
Supply & install 600/1000 volts, copper conductors, PVC/SWA/PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
4C-120 mm2 PVC/SWA/PVC +1C-70mm2 PVC/ECC cables serving 200A isolator for fire pump from MV panel-1
4C-16 mm2 PVC/SWA/PVC +1C-16mm2PVC/ECC cables serving 40A isolator for jockey pump from MV panel-1
C 69
D 20
E 25
F 30
G 14
To Collection QR.
Item Description Qty
4C-120 mm2 PVC/SWA/PVC +1C-70mm2 PVC/ECC cables serving 100 KVAR capacitor bank from MV panel-1
2 x 4C-240 mm2 PVC/SWA/PVC +1C-240 mm2 PVC/ECC cables serving SMB-1 from MV panel-2
2 x 4C-240 mm2 PVC/SWA/PVC +1C-240 mm2 PVC/ECC cables serving SMB-2 from MV panel-2
2 x 4C-240 mm2 PVC/SWA/PVC +1C-240 mm2 PVC/ECC cables serving SMB-3 from MV panel-2
E 4C-10 mm2 MICC cables serving DB-MV from MV panel-2. 10
F 2C-10 mm2 MICC cables serving DB-HV from MV panel-2. 10
Supply & install 600/1000 volts, copper conductors, PVC/SWA/PVC or MICC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
4C-25 mm2 PVC/SWA/PVC +1C-16 mm2 PVC/ECC cables serving 63A isolator for lift from MV panel-2
4C-25 mm2 PVC/SWA/PVC +1C-16 mm2 PVC/ECC cables serving 63A isolator for lift from MV panel-2
4C-185 mm2 PVC/SWA/PVC +1C-95 mm2 PVC/ECC cables serving 250 kvar capacitor bank from MV panel-2.
To Collection QR.
Item Description Qty
A 5
B 5
C
D 5
Supply & install 600/1000 volts, copper conductors, PVC/SWA/PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
2 x 4C-240 mm2 PVC/SWA/PVC +1C-240 mm2 PVC/ECC cables serving SMB-4 from Bus bar riser-1
2 x 4C-180 mm2 PVC/SWA/PVC +1C-180 mm2 PVC/ECC cables serving SMB-5 from Bus bar riser-1
2 x 4C-180 mm2 PVC/SWA/PVC +1C-180 mm2 PVC/ECC cables serving SMB-6 from Bus bar riser-2
2 x 4C-180 mm2 PVC/SWA/PVC +1C-180 mm2 PVC/ECC cables serving SMB-7 from Bus bar riser-2
To Collection QR.
Item Description Qty
A 27
B 23
C 18
Supply & install 600/1000 volts, copper conductors, PVC/SWA//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
Supply & install 600/1000 volts, copper conductors, PVC/SWA//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
Supply & install 600/1000 volts, copper conductors, PVC/SWA//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
Supply & install 600/1000 volts, copper conductors, PVC/SWA//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
Supply & install 600/1000 volts, copper conductors, PVC//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
Supply & install 600/1000 volts, copper conductors, PVC//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
conductors, PVC//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
Supply & install 600/1000 volts, copper conductors, XLPE/SWA/PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
A 46
B 54
C 62
D 54
54
4C-16 mm2 XLPE/SWA/PVC +1C-16 mm2 PVC/ECC cables serving 40A TP isolator for smoke extract fan at basement floor from SMB-FAN.
4C-16 mm2 XLPE/SWA/PVC +1C-16 mm2 PVC/ECC cables serving 40A TP isolator for PF-1 from SMB-FAN.
4C-16 mm2 XLPE/SWA/PVC +1C-16 mm2 PVC/ECC cables serving 40A TP isolator for PF-2 from SMB-FAN.
4C-16 mm2 XLPE/SWA/PVC +1C-16 mm2 PVC/ECC cables serving 40A TP isolator for PF-3 from SMB-FAN.
4C-16 mm2 XLPE/SWA/PVC +1C-16 mm2 PVC/ECC cables serving 40A TP isolator for PF-3 from M.V.PANEL-1.
To Collection QR.
Item Description Qty
A 16
B 21
C 26
D 31
E 36
F 41
G 46
H 51
Supply & install 600/1000 volts, copper conductors, PVC//PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-1 from SMB-LL.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-2 from SMB-LL.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-3 from SMB-LL.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-4 from SMB-LL.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-5 from SMB-LL.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-6 from SMB-LL.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-7 from SMB-LL.
2C-10 mm2 PVC/PVC +1C-10 mm2 PVC/ECCcables serving DB-(LL)-8 from SMB-LL.
To Collection QR.
Item Description Qty
A 25
B 3
C 70
D 33
Supply & install 600/1000 volts, copper conductors, PVC/SWA/PVC insulated cables, pulled inside sleeves or installed on cable tray and clipped to wall or in PVC duct complete with all jointing and termination kits, sleeves, conduits, laying of marker tape and protection tiles including all associated civil works etc as specified and shown on drawings.
4C-16 mm2 PVC/SWA/PVC +1C-16 mm2 PVC/ECCcables serving 40A TP isolator for lifting pump from SMB-LL.
Allow for complete bonding to trunking, water heaters, pumps, equipment etc. in full compliance to KAHRAMAA standards.
B Complete earthing system for electromechanical installation and structure.
C 25x3mm bar copper tape (roof conductor) 180
D Air terminal solid copper rod (500mm x15mm dia) 12
E 4
F 240
G Allow for tape to tape cadweld connection.
To Collection QR.
EARTHING & LIGHTNING PROTECTION SYSTEM
Earthing System (TN-S), completely installed including earth electrodes, earth pits, excavation, test links, clips, conduits, fittings, builder's work in connection and all related accessories.
Earth pit(30x300x300mm) with inspection cover and 20 mm copper electrode
Roof conductor down from parapet or high level to roof floor or lower level
To Collection QR.
Item Description Qty
CABLE TRAYS
A Allow for GI Cable trays and accessories
TRUNKING
B Allow for GI trunking and accessories
Supply & install Galvanized steel cable trays and fittings complete with purpose made sunshade/ protection covers, bends and junctions as specified and shown on drgs, including supports, fixings and associated builders works as necessary as detailed in drawings
Supply & install Galvanized steel cable trunking & fitting complete with protection covers as specified including supports, fixings, junction boxes and assocaited builder's work as necessary as detailed in drawings
To Collection QR.
Item Description Qty
LIGHTING INSTALLATION
A Type A, 2x36W surface mounted fluorescent luminaire.IP-54 78
B Type A+E, Ditto; with 2hrs emergency backup. 44
C Type B, 2x26W ceiling mounted luminaire. IP-20 390
D Type C, 2x18W ceiling mounted luminaire. IP-20 308
E Type D, 2x26W recessed luminaire. IP-54 114
F Type F, 2x26W recessed luminaire. IP-20. 9
Supply and install luminaires complete including all lamps, tubes, fittings, supports, control gear, diffusers, flexible connections, ceiling roses and wiring with 450 / 600 volt PVC insulated cable in concealed or exposed conduit or through floor trunking with necessary earthing; fixing in position including final connections and terminations as specified for the complete operational of the system.
G Type F+E, Ditto; with 2hrs emergency backup. 2
H Type G, 2x24W ceiling mounted luminaire. IP-40. 3
J Type G+E, Ditto; with 2hrs emergency backup. 1
To Collection QR.
Item Description Qty
A Type H, 2x26W recessed ceiling luminaire. IP-20 126
Supply and install luminaires complete including all lamps, tubes, fittings, supports, control gear, diffusers, flexible connections, ceiling roses and wiring with 450 / 600 volt PVC insulated cable in concealed or exposed conduit or through floor trunking with necessary earthing; fixing in position including final connections and terminations as specified for the complete operational of the system.
B Type H+E, Ditto; with 2hrs emergency backup. 28
C Type K, 1x70W recessed ceiling luminaire with IP-44 glass attachment. 100
D Type M, 1x18W Mirror Light. 158
E Type N, 1x70W wall mounted luminaire. IP- 65. 45
F Type N1, 1x70W wall mounted HIT luminaire. IP-65. 12
G EXIT Lights
To Collection QR.
Item Description Qty
A General lighting switch, one way, one gang 252
B General lighting switch, two way, one gang 106
C General lighting switch, one way, two gang 28
D General lighting switch, one way, three gang 142
E Bell Push Switch 50
F Photo cell, Contactor 1
G Timer, Contactor 1
H Manual Over Ride Switch 1
I Bell & Transformer 50
Supply & install 240 volt flush mounted accessories / lighting switches completely installed including boxes, plates, conduit boxes, accessories etc, and wiring with 450 / 600 volt PVC insulated cable in concealed or exposed conduit or hrough floor trunking with necessary earthing as specified for the complete operational of the system.
To Collection QR.
Item Description Qty
SMALL POWER INSTALLATION
A 13 amp switched single socket outlet. 462
B 13 amp switched single socket outlet; weather proof. 8
C 13 amp switched twin socket outlet. 441
D 13 amp switched twin socket outlet; weather proof. 4
E 20A Double Pole Switch 439
F 32A Double Pole Switch 1
G Cooker control unit 50
H 13/5 amp Switched Spur Unit 102
J 13/5 amp Switched Unswitched Spur Unit 2
Supply & install 240/415 volt flush mounted accessories completely installed including boxes, plates, conduit boxes, accessories and isolators complete with necessary supports, cable tray, sunshade etc, and wiring with 450 / 600 volt PVC insulated cable to BS 6004/ BS 4607 in concealed or exposed conduit or through floor trunking including all fittings and necessary earthing as specified for the complete operational of the system.
K 45A Flex outlet 480
K TV outlets 100
To Collection QR.
Item Description Qty
A 200A TPN Isolator 1
B 63A TPN Isolator 3
C 40A TPN Isolator 3
D 40A TPN Isolator; Weather proof 51
Supply & install for 415V/240V, isolators as specified complete with necessary supports, cable tray, sunshade etc. and Wiring with 450 / 600 volt PVC insulated cable (Power Cables meassured seperately) to BS 6004 in concealed or exposed conduit and fittings to BS 4607 complete as specified with necessary earthing.
E 20A TPN Isolator 1
F 20A TPN Isolator; Weather proof 1
G 20A DP Isolator; Weather proof 10
To Collection QR.
Item Description Qty
FIRE ALARM SYSTEM
A 1
B 7
C Addressable smoke detector 378
D Addressable Heat detector 102
E Addressable fire alarm bell 22
F Addressable Manual Call Point 46
G Addressable flasher 9
H Interface to lift control panel 1
The works include under this section shall comprise design, development, supply, installation, testing, commissioning and setting to work for all items which are necessary for a complete operational fire alarm system as outlined in the drawings and in the specifications and shall be carried out by a specialized sub contractor
Supply & install Fire alarm fittings and accessories and wiring with 2L x 1.5 mm2 fire resistant cables in PVC/GI conduitsor through cable trunking complete with glands and terminations complets as specified and indicated in the drawings.
6-Loop analogue addressable fire alarm control panel complete with printer, battery, battery charger and all accessories including wiring, conduiting and connection to the power supply
Mimic Panel ( Cable as specified by the specialist system contractor / supplier)
To Collection QR.
Item Description Qty
A Fire telephone panel (10 zone) 1
B Fire telephone 29
C Allow to connect Fire telephone panel with fire alarm panel
Supply & install fire telephone panel and Fire Telephones and accessories and wiring with 2L x 2.5 mm2 fire retardent cables in PVC/GI conduitsor through cable trunking complete with glands and terminations complets as specified and indicated in the drawings.
To Collection QR.
Item Description Qty
TELEPHONE INSTALLATION
A
Note : The works include under this section shall comprise supply, installation, cabling, testing, commissioning and setting to work for all items which are necessary for a complete operational Telephone System as outlined in the drawings and in specifications and shall be carried out by a Q-Tel approved specialized Sub-Contractor as per Q-Tel's standard and regulations and as per drawings.
Co-ordinate with Q-Tel for obtaining connection to the premises. Allow for Q-Tel's supervision fees pertaining to complete telephone installation (Provisonal sum).
Telephone installation devices, fittings, accessories complete with fascia plate cover as specified including 50/25 mm diameter PVC conduits with draw wire inside.
B Telephone Sockets 198
C Telephone Junction Box (400x400x100) 8
D Telephone Pull Box (100x100x100) 50
E Main Distribution Frame 1
F To Telephone Sockets 198
To Collection QR.
Item Description Qty
A
Telecommunication cable; CAT-6 cables per outlet in PVC conduits or in cable trunking / cable tray, complete as specified and shown on Drawings
BUILDERS WORK IN CONNECTION WITH ALL ELECTRICAL INSTALLATIONS.
Holes, chases, cutting back, building in, provision of pipe sleeves, fire barriers and making good finishes as necessary.
B
C
D
E
F Allow for GI conduits, GI connection box etc.
G
H
To Collection QR.
Allow for electrical manholes and trenches for cable laying as necessary/indicated in drawing
Allow for sleeves/ducts for encasing electrical cables passing beneath roads, paved areas and structures.
Isolator supports, equipment supports, sunshades including paint finishing and associated builders work as necessary.
Enclosures for distribution boards, switch boards and the like including paint finishing to Engineer's approval.
Allow for any other builders work deemed necessary for the completion of the Electrical Installations.
Earthing and Bonding System for Low Voltage Equipments with necessary earth bars and accessories as specified
Item Description Qty
A Marking the position of holes, mortises, chases and the like in the structure.
B
C Loose keys, tools and spare parts as specified.
D
E Provide Installation Drawings.
F Provide Record Drawings.
G Provide Operating and Maintenance Manuals.
H Warranties and Guarantees
J Testing and Commissioning.
SUNDRIES IN CONNECTION WITH ALL ELECTRICAL INSTALLATIONS.
Plates, discs, labels, and charts for identification of plant, equipment, pipes valves and the like.
Temporarily operating the Installations and instructing the Employer's representatives in the operations and maintenance of the Installations.
