pools - A.T.A. S.r.l · • Dosing and controlling systems for dry feeder and salt chlorine...

1

POOLS CATALOGUE

2

DESIGN. PRODUCTION. CONSULTING.EVERYTHING UNDER CONTROL.

4 5

Systems deliverable as single or twin units

• pH / Redox measurement and control

Proportional pump driven by internal built-in pH meter (0÷14pH) stand-byand level control, supplied withoutpH probe.

Proportional pump driven by internalbuilt-in ORP (ORP) meter (0÷1000mV) stand-by and level control, supplied without ORP probe.

VMS PHProportional pump driven by internal built-inpH meter (0÷14pH) and level control,supplied without pH probe.PVDF pump head and accessories

VMS RHProportional pump driven by internalbuilt-in ORP (ORP) meter (0÷1000mV)and level control,supplied without ORP probe.PVDF pump head and accessories

VPHEProportional pump driven by internal built-in pH meter (6.8÷7.4pH) and level control,supplied without pH probe. LED display.PVDF pump head and accessories

VRHEProportional pump driven by internal built-in ORP meter (660÷740mV) and level control,supplied without pH probe. LED display.PVDF pump head and accessories

DIGITAL MULTIFUNCTION PUMP(Constant, Divide, Multiply, PPM, Batch, Volt,mA, %, ml/q), stand-by*, and flow sensor input*, alarm output** and level control.

• Level gauges and mass-flow control

AMS MF

KMS MF

TMS MF

VMS MF

Dosing pumps

CONSTANT ANALOG DOSING PUMPS

*Not

ava

ilabl

e on

mod

. VM

S M

F **

Exte

rnal

ala

rm a

vaila

ble

on d

eman

d on

mod

. VM

S M

F an

d m

od. V

CL

Proportional controller for ORP with output for disinfectant or salt chlorine generator.

AMS CL

KCL

TCL

VCL

TMS PH

TMS RH

VMS PH - VMS RH

VPHE - VRHE

FMS EV

Pressurebar

Flowl/h

4 20

3 30

Pressurebar

Flowl/h

4 20

3 30

Pressurebar

Flowl/h

5 1

10 4

3 102 17

Pressurebar

Flowl/h

2 2

Solenoid ValveVAC

ConsumptionA

230 10

Pressurebar

Flowl/h

7 20

3 40

2 60

Stroke lenght andstroke speed adjustment

Pressurebar

Flowl/h

2 18

5 10

20 01

Stroke lenght andstroke speed adjustment

Pressurebar

Flowl/h

4 20

3 30

Stroke speed adjustment

Pressurebar

Flowl/h

5 1

10 4

3 10

2 17

Stroke speed adjustment

6 7

Swimming pool controller with 2 metering pumps for acid (pH) and flocculant (gr/h) and 230 VAC output for salt generator or dry feeder. Ranges: 0-14 pH and 0-10 mg/l Cl2. Chlorine probeto specified at order. Controller settings by wheel. LCD backlight display. Alarm output, max dosing time alarm, probe check-up, pH priority dosing. 230VAC output for solenoid valve for dryfeeder or chlorine generator (hydrolisys) dosing. Liquid ends in PVDF.Pressure 3bar - Flow 10l/h (sezione pH)

Swimming pool controller with 2 metering pumps for acid (pH) and anti-algae and 230 VAC output for salt generator or dry feeder. Ranges: 0-14 pH and 0-10 mg/l Cl2. Chlorine probe to be specified at order. Controller settings by wheel. LCD backlight display.Alarm output, max dosing time alarm, probe check-up, pH priority dosing. Weekly timer for Anti-algae dosing. 230VAC output for solenoid valve for dry feeder or chlorine generator (hydrolisys) dosing. Liquid ends in PVDF. Pressure 3bar - Flow 10l/h

• Dosing and controlling systems for dry feeder and salt chlorine generator

WDPHCA

WDPHCF

• Multiple chemicals measurement and control

Dosing pumps

pH & Chlorine

Swimming pool controller with 2metering pumps for acid (pH) andchlorine (Cl).

Ranges: 0-14 pH and 0-10 mg/l Cl2.Chlorine probe to specify at order.Controller settings by wheel. LCDbacklight display.

Alarm output, max dosing timealarm, probe check-up, pH prioritydosing. Liquid ends in PVDF.

pH & Redox (ORP)

Swimming pool controller with 2metering pumps for acid (pH) anddisinfectant (ORP).

Ranges: 0-14 pH and 0-1000 mV.Controller settings by wheel. LCDbacklight display.

Alarm output, max dosing timealarm, probe check-up, pH prioritydosing.Liquid ends in PVDF.

WDPHCL

WDPHRH

WDPHCLS - WDPHRHS pH / Redox (ORP) & EV

Swimming pool controller with one meteringpumps for acid (pH) and one 230VAC outputdriven by Redox (ORP) for salt generator ordry feeder.Liquid ends in PVDF.

Swimming pool controller with one meteringpumps for acid (pH) and one 230VAC outputdriven by Chlorine for salt generator ordry feeder. Available also with one meteringpump for acid (pH) and one 230VAC outputdriven by bromine for dry feeder (brominator).Liquid ends in PVDF. Chlorine probeto specify at order.

Pressurebar

Flowl/h

5 1

3 10

Pressurebar

Flowl/h

5 1

3 10

Pressurebar

Flowl/h

5 1

3 10

Section pH / Redox

Solenoid ValveVAC

ConsumptionA

230 10

Pressurebar

Flowl/h

3 10

Pressurebar

Flowl/h

3 10(section pH)

8 9

Foot-bath disinfection system. It works with a pulser sender water meter (1/2” size).

% control with level probe.

Dechloration system for filters cleaning waters. It works with a pulse sender water meter (1.1/2” or da 2” size).

PPM Control

Foot-bath disinfection system. It works with a pulser sender water meter (1/2” size).

% control with level probe.

VMS MF

TMS MF

VMS MF

CTFI

CTFI

CTFI

• pH and active oxygen measurement and control • Foot-bath disinfection systems

• Dechloration system for filters cleaning waters

Dosing pumps

FLOCCULANT

Metering pump for flocculant withdouble measurement scale (24h)

From 0 to 300 gr/dayFrom 0 to 3000 gr/day

* With level probe

ALGICIDE

Pump with weekly timer, microprocessor, digital controls, LCD display, level probe.

H2O2 Metering pump for active oxygenpump with supplied temperature probe.

Settings:- temperature compensation- pool volume

Pressurebar

Flowl/h

5 12

Pressurebar

Flowl/h

3 10

Pressurebar

Flowl/h

3 10(sezione pH)

3 4(sezione

ossigeno attivo)

Pressurebar

Flowl/h

3 4

Pressurebar

Flowgr/24h

5 3000

Pressurebar

Flowl/h

3 30

Pressurebar

Flowl/h

3 10

2 17

CTFI 1/2”

CTFI 1/2”

CTFI 1.1/2”CTFI 2”

Swimming pool controller with 2 metering pumps for acid (pH) and Active Oxygen. Ranges: 0-14 pH and temperature reading. PT100 temperature probe inlcuded. Controller settings by wheel.LCD backlight display. Alarm output, max dosing time alarm, probe check-up. Standard dosing volume at 25°C and 30°C based on swimming pool volume (m3). Weekly or daily timer. Liquid ends in PVDF.Pressure 3bar - Flow 10l/h (pH)Pressure 3bar - Flow 4l/h (Active Oxygen)

WDPHOS

VMS EN

VMSA H2O2

VCOG - VCLG*

10 11

LDPHxx Series Digital Controllers

Digital controller with microprocessor and LCD backlight display. Using a revolutionary wheel the controller can be easily programmed.

3 proportional pulses setpoints and 2 proportional On/Off or timered (PWM) setpoints. Stand-by input and max dosing time alarm. CHLORINE / BROMINE selector. Alarm for probe failure. General alarm output.

LDPHRH pH (0÷14) - ORP (0÷1000mV - °C (0÷99,9) LDPHCL* pH (0÷14) - Chlorine (0÷10 mg/l Cl2)* - °C (0÷99,9)LDPHO2 pH (0÷14) - O2 (0÷200 mg/l H2O2) - °C (0÷99,9)LDPRC pH (0÷14) - Chlorine (0÷10 mg/l Cl2) - °C (0÷99,9) and ORP only reading (0÷1000mV)

*Chlorine probe to specify at order.

MAX5(pH / Total chlorine / Free chlorine /Combined chlorine / Redox / °C / Turbidity / Conductivity )

MAX5 is a multiple digital controller system. It reads and controls up to 5 channels that can be programmed to control pH - ORP - Chlorine - Turbidity - Temperature - Total Chlorine control.

It features 6 setpoint outputs, 6 proportional pump outputs, 5 level tank inputs, 5 flocculant/algicide dosing timer, water meter input for water restore, alarm output. MAX5 can be connected to a PCfor pool remote controlling/ programming using a standard USB port or RS485 connection or GSM MODEM.

All information are provided through a widescreen LCD display (240x64). Using a revolutionary wheel the controller can be easily programmed. Self-installing communication software.

Control is delivered via a rotational encoder

MAX5 working ranges are:

pH: from 0 to 14 pHORP (Redox): from 0 to 1000 mVTotal Chlorine: from 0 to 10 mg/lFree Chlorine: from 0 to 10 mg/lCombined Chlorine: from 0 to 10 mg/lTurbidity: from 0 to 30 NTUTemperature: from 0 to 100 °CConductivity: from 0 to 300 mS

LDxx Series Digital Controllers

Digital controller with automatic temperature compensation (ETEPT probe, not included). LCD backlight display. Outputs: On/Off, proportional digital, max dosing time alarm, chart recorder output (0-20 or 4-20), serial port for printer or GSM Modem, probe cleaning output. Inputs: pulse emitter water meter input, product levels,stand-by, flow.

RS232/485 serial port.“SMS alarm” ready. IP65 housing.

LDPH pH (0÷14 pH), °C (0÷150) LDRH ORP (-1000÷+2000 mV), °C (0÷150) LDCL Free chlorine, Chlorine, Oxygen Peroxide, Ozone, Bromine (based on choosen probe), °C (0÷150)

Single unit controller for: pH or ORP or Conductivity or Chlorine or Ozone or Dissolved Oxygen or Chlorine Dioxide or H2O2 and Temperature. Automatic temperature compensation (ETEP probe, not included).Two On/Off set points. 0÷20 mA or 4÷20 mA output proportional to measured value.

RACK mounting(48x96mm)

RAIL mounting(6 moduli)

• Digital controllers for swimming pools parameters control: pH - Redox - Cl2 - °C - Br2 - O3 - Total chlorine - H2O2

Single parameter digital instruments Multi-parameter digital instruments

JC SERIES J DIGITAL SERIES DIN DIGITAL SERIES

RACK mounting(96x96mm)

• Simultaneous multi-parameter measurement and control

12 13

For pH or ORP control.Salt chlorine generator output.

1. Controller WDPHRHS 07 06 (6 l/h)2. NFIL Filter3. Probe Redox ERHS4. Probe pH EPHS5. Probe Holder NPED4

Dimensions: 400x600 mmPre-assembled panel.Available with customized / coloured background

For pH and Redox control.

1. Controller WDPHRH 03 10 (10 l/h)2. NFIL Filter3. Probe Redox ERHS4. Probe pH EPHS5. Probe Holder NPED4


For pH proportional controland active oxygen.

1. Dosing Pump VMS PH 07 062. Dosing Pump VMS H2O2 03 043. NFIL Filter4. Temperature Probe5. Probe pH EPHS6. Probe Holder NPED4


For pH proportional controland Chlorine (Redox).

1. Dosing Pump VMS PH 07062. Dosing Pump VMS RH 07063. NFIL Filter4. Probe Redox ERHS5. Probe pH EPHS6. Probe Holder NPED4


Complete control and dosing systems

PA- PHH2O2 PA- PHRH PA- WDPHRH PA- WDPHEV

• Water treatment

1 1

22

33

44

5 5

1 12 2

3 34 45 5

6 6

14 15

• pH / Chlorine treatment

For proportional pH and chlorine.

1. Controller WDPHCL2. NFIL Filter3. Proximity sensor SEPR4. Probe pH EPHS5. Open amperometric cell ECL6


Chlorine

Inorganic and organic chlorine

PA-WDPHCL

PA-WDPHCLO

For proportional pH and chlorine (inorganic and organic).

1. Controller WDPHCL2. NFIL Filter3. Proximity sensor SEPR4. Probe pH EPHS5. Probe chlorine ELC3S/106. Probes holder PEF1


Salt sterilizer version: - Flocculant PA-WDPHCFSA- Algicide PA-WDPHCASA

1. Controller WDPHCA 07 062. Probe Redox EPHS3. NFIL Filter4. Proximity sensor SEPR5. Amperometric cell ECL6


Bromine dry feeder version: - Flocculant PA-WDPHCFBR- Algicide PA-WDPHCABR

1. Controller WDPHCL 07 062. Probe Redox EPHS3. NFIL Filter4. Proximity sensor SEPR5. Amperometric cell ECL6


• Water treatment

Complete control and dosing

PA-WDPHCFSA / PA-WDPHCASAPA-WDPHCFBR / PA-WDPHCABR

1

2 3

4

5

1

2 3

4

6

5

1

2

3

4

5

16 17

For pH and chlorine proportional control.Large size swimming pool.

1. Controller LDPHCL2. Dosing Pump acid VMS MF 02 17 (17 l/h)3. Dosing Pump chlorine GMS MF 03 30 (30 l/h)4. NFIL Filter5. Probe pH EPHS6. Proximity sensor SEPR7. Temperature probe ETEPT8. Open amperometric cell ECL6


PA- LDPHCLOB

PA- LDPHCLOBG

For pH and chlorine proportional control.Large size swimming pool.

1. Controller LDPHCL2. Dosing Pump acid GMS MF 03 30 (30 l/h)3. Dosing Pump chlorine GMS MF 01 50 (50 l/h)4. NFIL Filter5. Probe pH EPHS6. Proximity sensor SEPR7. Temperature probe ETEPT8. Open amperometric cell ECL6


To use with dry feeder (chlorine / bromine) or sterilizer. Medium size swimming pools.

1. Controller LDPHCL2. Dosing Pump acid VMS MF 03 10 (10 l/h)3. NFIL Filter4. Probe pH EPHS5. Proximity sensor SEPR6. Temperature probe ETEPT7. Open amperometric cell ECL6


• LDPHCL controller based system with open amperometric cell ECL6

Control and dosing

PA- LDPHCL

PA- LDPHCLO

For pH and chlorine proportional control. Medium size swimming pools.

1. Controller LDPHCL2. Dosing Pump acid VMS MF 03 10 (10 l/h)3. Dosing Pump chlorine VMS MF 02 17 (17 l/h)4. NFIL Filter5. Probe pH EPHS6. Proximity sensor SEPR7. Temperature probe ETEPT8. Open amperometric cell ECL6


1

1

4

5

6

7

8

2 3

4

5

6

8

7

2 3

1 2

4

5

6

8

7

3

1 2

3

4

5

6

7

18 19

For dosing and controlling proportional pH and chlorine (inorganic and organic).For big-size swimming pools.

1. Controller LDPHCL2. Dosing Pump acid VMS MF 02 17 (17 l/h)3. Dosing Pump chlorine GMS MF 03 30 (30 l/h)4. NFIL Filter5. Proximity sensor SEPR6. Probe pH EPHS7. Probe chlorine ECL3S/108. Probes holder PEF1


PA- LDPHCLVG

PA- LDPHCLGD

For dosing and controlling proportional pH and chlorine (inorganic and organic).For mid-size swimming pools.

1. Controller LDPHCL2. Dosing Pump acid GMS MF 03 30 (30 l/h)3. Dosing Pump chlorine GMS MF 01 50 (50 l/h)4. NFIL Filter5. Proximity sensor SEPR6. Probe pH EPHS7. Probe chlorine ECL3S/108. Probes holder PEF1


To use with dry feeder or salt chlorine generator. For mid-size swimming pools.

1. Controller LDPHCL2. Dosing Pump acid VMS MF 03 10 (10 l/h)3. NFIL Filter4. Proximity sensor SEPR5. Probe pH EPHS6. Probe chlorine ECL3S/107. Temperature probe ETEPT8. Probes holder PEF1


• LDPHCL controller based system with closed amperometric cell ECL3S/10 and PEF1

Control and dosing

PA- LDPHCLV

PA- LDPHCLVD

For dosing and controlling proportional pH and chlorine (inorganic and organic).For mid-size swimming pools.

1. Controller LDPHCL2. Dosing Pump acid VMS MF 03 10 (10 l/h)3. Dosing Pump chlorine VMS MF 02 17 (17 l/h)4. NFIL Filter5. Proximity sensor SEPR6. Probe pH EPHS7. Probe chlorine ECL3S/108. Temperature probe ETEPT9. Probes holder PEF1


1 2 3

4 5

8

76

1 2 3

4 5

8

6 7

1

1

6

45

9

8 7

2 3

3

5

4

8

7 6

2

20 21

MAX5 RS485 + USB version The core of your communication system is MAX5 integrated. The software included realizes the connection beetween controller and PC by RS485 ora USB port.

MAX5 GSM + RS485 + USB versionGSM option is available for multiple MAX5 remote control.The communication software included allows to control one or more controllers even if they are installed on different plants. More over you canalways realizes the connection between the controller and PC by RS485 or a USB port. GSM option features SMS communication and SMS alarm.

Options: ETHERNET + RS485 + USBInternet: to log-in all you need is a PC, the remote management software and either local or remote network access. You can set the device to trigger email alerts. You can also access the Internet either by plugging a RS485 cable into your computer or via USB.

MAX5 WEBSERVER + HOSTING ServiceInternet: just a web browser for remote and reliable control of one or more MAX5 controllers. NO software or application needed. We host your controller’s interface! Otherwise you can always realize the connection between the controller and PC by RS485 or a USB port.

Hosting service operates with ETHERNET or GPRS / GSM option.

• LAN - GPRS/GSM - Webserver with HOSTING service

Worldwide controlling system

For pH, ORP, Free chlorine and Temperature

1. Controller MAX52. Dosing Pump acid VMS MF 03 10*3. Dosing Pump chlorine VMS MF 02 17*4. NFIL Filter5. Probe EPHS di pH6. Probe ECL3S/10 chlorine libero7. Proximity sensor SEPR8. Temperature probe ETEPT9. Probe ERHS di Redox10. Probes holder PEF1

*GMS pump version (Ordering code PA-M5DG)

Dimensions: 800x800 mm Pre-assembled panel. Available with customized / coloured background

Advanced complete systems

PA-M5D

PA-M5DB

1. Multiparameters controller MAX5 (pH, Cl, Clt, T°)2. Dosing Pump acid VMS MF 03 103. Dosing Pump chlorine VMS MF 02 174. Dosing Pump flocculante VCLG*5. Dosing Pump anti-alghe VMS EN 07 06*6. NFIL Filter7. Probe pH EPHS

*not available for panel PA-M5DV

Dimensions: 1000x800 mmPre-assembled panel. Available with customized / coloured background

PA-M5DV

REMOTE CONTROL

MAX5

For pH, ORP, Free chlorine, Chlorine, Combined chlorine, Temperature, Flocculant and Algicide


8. Probe Redox ERHS9. Temperature probe ETEPT10. Probe free chlorine ECL3S/1011. Probe chlorine ECL8/1012. Proximity sensor SEPR13. Probes holder PEF22

1 2 3

5

47

10

6

8 9

1

7 89

10 11

612

13

2 3 4 5

22 23

Accessories for controllers

EPHS

pH electrode for pressures up to 7bar/70°C (3.5bar/80°C).0.8m cable. Epoxy body.Minimum 100μS.

ERHS

ORP electrode for pressures up to7bar/70°C (3.5bar/80°C).0.8m cable. Epoxy body.Minimum 100μS.

ECL8

Total chlorine amperometric cell (organic and inorganic),from 0 to 2 mg/l ; from 0 to 20 mg/l, pH and temperature compensated.

PEF1

Porta elettrodo a deflusso per ECL1/2/3/8/9/10/11ed elettrodi di pH, Redox e temperatura.Fornito con regolatore di flusso tipo SEPR. Raccordi 6X8.

NFIL CA

Activated 5” filter with carbonfilter cartridge. 6x8 fittings.

NFIL

Filter with cartridge. Washable.PET (60 μ). 6x8 fittings.

PELC

PVDF in-line electrode holder for pH / Redox electrodeswith 1/2” or 3/4” thread.For saddle connection.

PEL

PVDF in-line electrode holder for pH / Redox electrodeswith 1/2” or 3/4” thread.For “T” connection.

EVLA

Electrovalve for dry feeder. 1/2” fitting.

ETEPT

Temperature probe (0°C÷100 °C, max 10bar).

ECL6 - ECL12

Free chlorine / bromine amperometric cell (organic and inorganic), from 0 to 10 mg/l.Flow switch and flow adjustment.Electrodes holder for pH, Redox and temperature.With proximity switch mod. SEPR. 6x8 fittings.

BUFFER SOLUTIONS

Buffer solutions for probes calibration.

PEF22

Free, total chlorine, pH, ORP and Temperature probes holderwith flow switch and flow adjustment. 6x8 fittings.Best for MAX5 digital controller.

NPED4

Off-line electrode holder for EPH, ERH electrodes. Temperature max 50° C,max pressure 5bar with flow sensor with N.O. contact. 6x8 fittings.

ECL3S/10

Free chlorine amperometric cell (organic and inorganic),from 0 to 10 mg/l, pH and temperature compensated.

24

Accessories for pumps

LINR

1/2” injection lance for dosing sodium hypohlorite in hard water.PVC body.Viton® or EPDM o-ring. Ball valve.

MF MULTIFUNCTIONS VALVE

Multifunction valve (presure, safety, antisyphon and bleed) 1/2” connections for different hoses diameters. Pressure range adjustable from 1 to 5 bar for pressure valve operating mode, from 1 to 18 bar for safety valve operating mode. Discharge connection3/8” 4x6. Viton® or EPDM o-ring. PVDF body.

INJECTIONVALVE 1/2”

Injection valve (PVDF).

LEVEL PROBE

Level probe with foot filter and BNCconnector (full natural PVDF).

CHEMICAL TANKS &SAFETY BAFFLES

Polyethylene, anti-UV for chemicals. Complete chemicaltanks with safety baffles, metering pump and mixer.

MIXV/8

High speed mixer1400 RPM.AISI shaft-PVC coated,different lengths available(630-730-830-930 mm).Marine impeller,diameter 70mm.

MIX/8

Low speed mixer70/200 RPM.AISI shaft-PVC coated,different lengths available(630-730-830-930 mm).3-blade impeller,diameter 150mm.

MIX/MAN

Manual mixer.PVC shaft, differentlengths available(500-600 and 700-800 mm).Impeller diameter 130 mm.

LASP1/x

Suction lanceswith level control,for tanks up to1000 liters.

LASP/x

Suction lanceswith level control,for tanks up to25 liters.

EMEC S.r.l.Via Donatori di Sangue, 1

02100 Vazia (RI) - Italia

T +39 0746 22841T +39 0746 1725114

F +39 0746 22842

[email protected]

Mar

ketin

g D

ept.

05/2

010

sistemi di dosaggiotrattamento acquefertirrigazioneautomazione

Via Molinello 38 16035 Rapallo (GE)Tel. +39 0185263015 Fax +39 0185260114Htpp://www.atasrl.it e-mal:[email protected]

P.iva 03588120109

Date post:	25-Aug-2020
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

pools - A.T.A. S.r.l · • Dosing and controlling systems for dry feeder and salt chlorine...

Documents