1
POROSITY MEASUREMENT
By: Zana Tahir
Karmand Muhammad
Supervised by: Mr.
Barham
2
Outline of presentation
1
1.What is porosity?
2.What is porosity measurement?
3.Classification of porosity.
4.Methods of measuring porosity.
3
porosity
2
Porosity is defined as a measure of the capacity of reservoir rocks to contain or store fluids. The fluids stored in the pore spaces within the reservoir rocks could be gas, oil, and water.
Figure. model pore material of porosity
4
Porosity Indicates
3
1 -High porosity values indicate high capacities of the reservoir rocks to contain these fluids
2 -Low porosity values indicate low capacities of the reservoir rocks to contain these fluids
5
Porosity Measurement
Porosity measurement is a method we can use it to measure the pore spaces between the grains of the rocks , by this way we can indicate the
type of the porosity...
4
6
Porosity Measurement
5Sandstone Crystalline Rock (Granite)
7
Classification of Porosity
porosity
Pore connectio
n
Absolute
effective
Origin primary
Secondary
6
8
Classification of Porosity
Pore Connection:-
1. Absolute porosity: is the ratio between the total pore volume (interconnected pores and isolated ones) and the bulk volume:
7
9
Classification of Porosity
2. Effective Porosity: is the ratio between the interconnected pore volume and the bulk volume:
8
10
Classification of Porosity
According to their origin-:
1.primary(original):-Developed during the deposition of the rock material.
Rocks with the original porosity are more uniform in their characteristics.
2 .Secondary (induced) :-Developed by some geologic processes subsequent to deposition of the rock.
9
11
Methods of measuring porosity
seismic
logging laboratory
10
12
Methods of measuring porosity
1. Laboratory:- Numerous methods can be used in the laboratory to determine porosity and density.
11
13
Methods of measuring porosity
2- logging :-Several logging techniques are available to measure density or porosity
, by using porosity tools:
A-Density Porosity. B-Neutron Porosity. C-Sonic Porosity.
12
14
Methods of measuring porosity
3. seismic :-seismic method is based on the generation of electromagnetic fields in soils and rocks by seismic waves.
13
1514
16
R. Hook, Jeffery.(2003)”An Introduction to Porosity” ,Society of Petro physicists & Well Log Analysts[Online], May. Available:
https://www.onepetro.org/journal-paper/SPWLA-2003-v44n3a4[Accessed 02 May 2015]
Ezekwe, Nnaemeka.(2010)”Petroleum Reservoir Engineering Practice ”InfromIT[online], Sep 14. Available:
http://www.informit.com/store/petroleum-reservoir-engineering-practice-9780137152834?w_ptgrevartcl=Petroleum+Reservoir+Engineering+Practice%3a+Porosity+of+Reservoir+Rocks_1626870
[Accessed 02 May 2015]
15
Reference
17