Date post: | 08-Apr-2018 |
Category: |
Documents |
Upload: | srinivas-naidu |
View: | 231 times |
Download: | 1 times |
of 28
8/6/2019 Port Freight Logistics Plan
1/28
SYDNEY PORTS CORPORATION
Port Freight Logistics PlanA framework to improve road and rail performance at Port Botany
June 2008
8/6/2019 Port Freight Logistics Plan
2/28
2
ContentsSydney Ports Corporation
1. Introduction 3
2. Existing container freight operations 4
2.1. Portside freight operations
2.2. Landside freight operations
Road
Rail
Intermodal terminals
2.3. Future challenges
Areas for improvement
Consistency with best practice
3. Maximising the use of rail infrastructure in servicing the port 11
3.1. Enhancing rail access and operations at Port Botany
Port Botany container terminals
Botany Yard
Port Botany Freight Line3.2. Upgrading rail freight corridors in metropolitan Sydney
3.3. Intermodal terminal development to support rail movements
4. Minimising truck movements in servicing the port 16
4.1. Optimising road operations at Port Botany
Encouraging truck movements away from peak periods
Introduction of high efficiency container trucks in Port Botany
Road enhancements in Port Botany
Operating hours of port logistics industries
4.2. Increasing truck efficiency to minimise road movements
Higher Mass Limits (HMLs)Mechanisms to support better truck scheduling and utilisation
4.3. Expanding road freight corridors in metropolitan Sydney
5. Implementation program 21
5.1. Consultation
5.2. Deliverable milestones
5.3. Reforming Port Botanys links with inland transport IPART
5.4. Efficiency indicators
8/6/2019 Port Freight Logistics Plan
3/28
3
The Port Freight Logistics Plan represents a framework
by Sydney Ports Corporation for improvements to
landside logistics to meet the challenges of managing
port activities in light of anticipated demand. The
Plan discusses existing port operations, initiatives to
maximise the use of rail, and initiatives to minimise
the impact of truck movements generated by the port.
The successful implementation of the Plan will require
ongoing facilitation with a number of industry and
government stakeholders. Sydney Ports believes that
the matters and issues discussed in the Plan will assist
in improving port freight logistics to the benefit of the
port, industry and the community.
The Port Freight Logistics Plan also fulfils the
development consent conditions of the Port Botany
Expansion, as shown in Table 7 on page 27. This
project will support the growth in container volumes
by providing an additional five berths and 60 hectares
of container terminal area. The expanded container
terminal area will also have dedicated road and
rail access.
Sydney Ports Corporation
Sydney Ports Corporation is a State-owned corporation with a mandate
for managing port activities at Port Botany and Sydney Harbour, and a key
stakeholder in facilitating the efficient landside movement of containers
and general cargo.
Introduction
8/6/2019 Port Freight Logistics Plan
4/28
4
Sydneys sea ports are a focal point of a network of
sea, road and rail links connecting the importers and
exporters of NSW with international markets. Growth in
container trade is strongly linked to economic growth.
While there are a number of predictions for container
growth, the annual growth rates for Sydneys container
trade are predicted by Sydney Ports to be between 4.8
per cent and 5.6 per cent per year for the next 20 years.
Port Botanys container trade is forecast to increase
from around 1.6 million TEUs ( twenty-foot equivalent
units) per year to more than 3 million TEUs per year
by 2025.
Sydneys sea ports constitute a significant asset, handling
in excess of $50 billion worth of trade per year. Around
45 per cent of the cargo by volume and 80 per cent by
value handled through Sydneys sea ports is containerised
cargo. Containers carry a broad range of primary products,
manufactured items and consumer goods which are
distributed widely within metropolitan Sydney. More
than 97 per cent of this volume is handled at Port Botany
and over 85 per cent of these are containers packed or
unpacked within the greater metropolitan area of Sydney.
Due to its proximity to the Sydney market, Port Botany is
and will remain the primary port for the import and export
of containerised cargo in NSW.
2.1. Portside freight operations
The portside freight operations consider the
arrangements in place to unload and load containers
from a vessel that arrives at the port. At Port Botany,
there are two container terminals where the initial
storage of containers and the initial transfer of
containers by road or rail are currently undertaken, at
Brotherson Dock North and Brotherson Dock South by
two stevedoring companies: DP World (formerly P&O
Ports) and Patrick (owned by Asciano). The expansionof Port Botany will create a third container terminal.
2.2. Landside freight operations
An efficient transport system in a capital city such as
Sydney depends on the effective integration of the
various components within the transport chain. The
ports area of influence and involvement therefore
extends beyond the traditional confines of the maritime
activities and port operations and into the area of
landside logistics and supply chains. Sydney is a heavily
import dominant port. For every two containers that
arrive with cargo, one returns overseas empty. The
export trade is split between regional product and
metropolitan manufactured goods. The inbound supply
chain for containers is almost exclusively restricted to
the Sydney metropolitan area, with containers being
unpacked in warehouses across the city. However,
there are four concentrated areas for industrial
distribution within the metropolitan area: Port Botany,
inner and middle west, south west and far west.
The logistics chain for the transfer of container cargo
through the port is shown in Figure 1. It operates in
two ways:
Road based where containers are transported directly
by truck to importers warehouses and distribution
centres for unloading. Containers are returned, viaan empty container park, to the port empty or sent
to another warehouse for packing with export goods
and transported to the port for shipment off-shore.
Road and rail based where containers are
transported by rail to intermodal terminals close to
the market being served and unloaded for transport
by truck to warehousing and distribution areas within
that market area. This process reduces the truck
distance involved and will improve the reliability in
delivery times. Empty containers can make the return
journey via the intermodal terminals, or be sent to
exporters warehouses for packing with export goodsand returned to the port via the intermodal terminal.
Sydney Ports Corporation
About 98 per cent of Australias international trade is undertaken by
sea and provision of adequate port facilities and associated landside
logistics is vital for the continued growth of the NSW economy.
2. Existing container freight operations
8/6/2019 Port Freight Logistics Plan
5/28
5
Sydney Ports Corporation
Figure 1: Logistics chain for road and rail based transfer of containers
2. Existing container freight operations
Transport chain using direct road movement
Transport chain using intermodal terminal
ROAD MOVEMENT
ROAD MOVEMENT WAREHOUSE
PORT & STEVEDORING OPERATIONS
INTERMODAL TERMINALPORT & STEVEDORING OPERATIONS
WAREHOUSE
RAIL MOVEMENT
IMPORTER/EXPORTER
IMPORTER/EXPORTER
ROAD MOVEMENT
8/6/2019 Port Freight Logistics Plan
6/28
6
Sydney Ports Corporation
Road
Sydney is supported by a motorway system that
forms an orbital network within the metropolitan areas
(Figure 2). This network provides direct linkages to
industrial areas, warehousing and port related areas
at Port Botany, inner and middle west, south west
and west of Sydney. The orbital network includes the
following roads:
M1 Motorway from Sydney Airport to Sydney CBD.M2 Motorway and Lane Cove Tunnel from Seven
Hills to Gore Hill Freeway.
M4 Motorway from Penrith to Strathfield.
M5 Motorway from Campbelltown to Sydney
Airport.
M7 Motorway from Liverpool to Pennant Hills
(crossing the M4 Motorway).
Cross City Tunnel linking the City West Link to the
M1 Motorway.
There is direct road access at Port Botany to the
Sydney orbital network via Foreshore Road (the main
port access road). Over three-quarters of containers
are transported to and from the port by road by over
200 road transport carriers.
Rail
A dedicated rail freight line exists between Port Botany
and Enfield/Chullora, a distance of approximately 20
kilometres. There is also a freight rail link to the port
at White Bay which joins the main Port Botany Freight
Line at Wardell Junction in Marrickville (Figure 2).
A freight line extension to the south west exists from
Chullora to Sefton Junction (about 2.5 kilometres).
From Sefton Junction to Macarthur, freight trainstraverse and share the passenger network on the
Main South Line. The Australian Rail Track Corporation
received planning approval in December 2006 to
provide a freight line along the existing rail corridor
between Sefton Junction and Macarthur. This project
is expected to be completed by 2009.
A further freight line extension to the north runs from
Chullora to Flemington Junction, Strathfield and North
Strathfield (about five kilometres), where freight trains
then use the passenger network on the Main North
Line to Hornsby via Epping.
Freight trains travelling from Enfield/Chullora to the
west share the passenger rail network on the Main
West Line from Lidcombe to Penrith.
Along the metropolitan rail corridors where freight
trains share the network with passenger trains,
priority is given to passenger services. This represents
a significant constraint to rail freight efficiency,
particularly during the peak commuter hours and when
curfews prevent any activities by freight trains on the
metropolitan rail network.
2. Existing container freight operations
Sydney Ports Corporation
8/6/2019 Port Freight Logistics Plan
7/28
7
Sydney Ports Corporation
2. Existing container freight operations
Motorways
Main roads
Dedicated freight rail lines
Shared passenger/freight rail lines
Dedicated passenger rail lines
Southern Sydney Freight Line (planned)
Intermodal Terminals
Industrial zones
Port facilities
Enfield Intermodal Logistics Centre (planned)
Moorebank Intermodal Terminal (proposed)
Port Botany development area
February 2008
Figure 2: Metropolitan road and rail links
8/6/2019 Port Freight Logistics Plan
8/28
8
Sydney Ports Corporation
The Botany to Enfield freight line is linked to
operational sidings in Port Botany on the Patrick
container terminal, DP World container terminal and
the P&O Trans Australia container park. The port is
serviced by a number of rail operators:
Macarthur Intermodal Shipping Terminal at Minto
is using Independent Rail as its train provider for its
Port Botany shuttle.
Mannway Intermodal Terminal at Villawood haveappointed Southern&Silverton as their rail operator
for Port Botany shuttles.
Maritime Container Services at Cooks River uses
Independent Rail as its rail operator for Port Botany
shuttles.
Camellia Intermodal Terminal is using Patrick
PortLink as its train provider for its rail shuttles.
Yennora Intermodal Terminal is using Patrick
PortLink and InterLink (QR National) as its train
provider for its rail shuttles.
Australian Railway Group (QR National) is operating
the Manildra Groups Manildra and Nowra rail
services.
Patrick PortLink, Southern&Silverton and
Independent Rail are servicing clients in the Central
West, including Bathurst, Blayney, Dubbo, Warren
and Forbes.
Patrick PortLink, Southern&Silverton and
Independent Rail are servicing clients in the North
West, including Narrabri, Wee Waa and Moree.
Sydney Ports and the NSW Government have
identified the need to increase the proportion ofcontainers transported by rail to and from Port Botany
from the current mode share of 20 per cent to a rail
mode share to 40 per cent.
Intermodal terminals
A number of intermodal terminals are located within
the Sydney metropolitan area. These are primarily
located in close proximity to areas of concentrated
industrial distribution. These intermodal terminals
service the port or function as a transfer point
for interstate cargoes. Further information on the
intermodal terminals in Sydney is provided in
Table 1.
Table 1: Intermodal terminals in Sydney
Location Users Siding length Estimated capacity
Camellia Patrick PortLink 300 metres 80,000 TEU
Chullora Pacific National
(interstate operations only)
680 metres 300,000 TEU
Cooks River Maritime Container Services 500 metres 150,000 TEU
Villawood Mannway 350 metres 20,000 TEU
Minto Macarthur Intermodal Shipping Terminal 390 metres 45,000 TEU
Yennora Patrick PortLink/QR National 500 metres 50,000 TEU
Note: Terminal capacity is limited in some cases by the availability of freight train paths.
2. Existing container freight operations
8/6/2019 Port Freight Logistics Plan
9/28
9
Sydney Ports Corporation
2.3. Future challenges
The existing road and rail freight networks have
generally been able to efficiently handle the freight
task. However, there are a number of indicators that
suggest supporting the future freight task will pose
significant challenges:
The volume of road general freight in Australia is
forecast to double over the next 20 years.
Container volumes at Port Botany are anticipatedto increase from 1.62 million in 2006/07 to over
3 million within 20 years.
Continued growth in population and economic
activity also means that increases in freight
movements are inevitable.
The Metropolitan Strategy, released by the NSW
Government in December 2005, provides a strategic
response to these trends and the identification of
a possible future freight network for metropolitan
Sydney. The task of Sydney Ports, other government
agencies, professionals and industry involved inlogistics planning is to use this direction to develop
a series of outcomes that can be achieved in the
short, medium and long term. This will require
close collaboration between all stakeholders. The
Port Botany Logistics Taskforce established by the
NSW Government is a forum where collaboration
on a number of logistics issues is being undertaken
between government and industry.
Areas for improvement
A key objective of the Port Freight Logistics Plan is
to identify areas for improvement in the efficiency
of container movements and rail interfacing through
operational, technological or administrative changes.
Further details on possible improvements in the
efficiency of container movements and rail interfacing
are outlined in Sections 3 and 4. An implementation
program in achieving these improvements with the
involvement of government and industry is outlined in
Section 5.
One area where improvements can be made for
landside logistics relate to operational changes.
These consider commercial and non-commercial
arrangements that can enhance the practices by each
stakeholder or across a number of stakeholders within
the supply chain. The changes can have an impact
on efficient container movement and rail interfacing
by encouraging practices that support better truck
utilisation or increase the viability of train services
by using mechanisms that influence the price andallocation of transport movements for freight.
Technological changes are another area where
landside logistics improvements are possible.
Technological changes consider the use of electronic
methods to streamline or improve operations by each
stakeholder or across a number of stakeholders within
the supply chain. These changes can have an impact
on efficient container movement and rail interfacing
by allowing for the introduction of tools that allow for
real savings in labour and resource utilisation, thereby
allowing for greater efficiencies in the movement of
freight into and out of the port.
Administrative changes can also provide improvements
to the management of logistics at the port. These
changes consider the role of institutions, frameworks,
practices and procedures that support the needs of
each stakeholder or across a number of players within
the supply chain. The changes can have an impact
on efficient container movement and rail interfacing
by allowing for richer information flows, improved
co-ordination and better co-operation within one
element of the supply chain or amongst a number of
stakeholders across the supply chain.
2. Existing container freight operations
8/6/2019 Port Freight Logistics Plan
10/28
10
Sydney Ports Corporation
Consistency with best practice
Sydney Ports closely monitors the performance
of Australian and international ports in relation to
landside logistics operation and management. This is
an important element in benchmarking our strategic
and operational outcomes achieved over a defined
period. The key areas of interest for Sydney Ports are
investigating methods in improving road transport
movements and management, and understanding
identifying ways in increasing the mode share towards
rail that can support the efficient movement of port
related containers within metropolitan Sydney and
regional New South Wales.
It is important that the Port Freight Logistics Plan
is informed by leading examples by other container
ports to ensure that best practice in relation to
freight logistics is being achieved. Table 2 outlines
a range of ports in Australia, Asia, North America
and Europe that have been examined in relation to
landside logistics management Port of Melbourne,
Port of Yokohama, Port of Los Angeles and Port of
Rotterdam. A number of initiatives in relation to road
and rail in the ports at these locations are consistent
with the outcomes being sought by Sydney Ports
and the NSW Government. These include additional
rail infrastructure to provide new access or enhance
existing operations, trucks that can handle a greater
number of containers per vehicle, and mechanisms to
encourage truck movements away from peak periods.
Table 2: Landside logistics improvements in Australian and international ports
Port locationLandside logistics improvements
Rail Road
Port of Melbourne
Australia
Target to increase rail mode share
to 30 per cent
Dynon Port Rail Link to provide rail
access to container terminals
Higher Efficiency Container Trucks with
additional container capacity per vehicleand measurable operational efficiencies to
be introduced within an extended area at
the port
Port of Yokohama
Japan
Provision for direct rail access to
selected container terminal
Port of Los Angeles
United States of America
Completion of Alameda Corridor with
high speed rail access between port
and industrial areas
PierPass charging regime to discourage
truck movements at port during peak
periods
Port of Rotterdam
Netherlands
Expanding rail capacity and removingoperational limitations
Encouraging staggered transportthroughout the day
Introduction of larger trucks(up to 3 TEU capacity)
2. Existing container freight operations
8/6/2019 Port Freight Logistics Plan
11/28
11
Sydney Ports Corporation
The volumes transported by rail to and from Port
Botany have increased from 123,000 in 1997/ 98
to 300,000 in 2006 /07, and currently represents
20 per cent of all containers transported to and
from the port (Figure 3). These volumes include
export products from regional NSW, and port
shuttle movements of exports and imports within
metropolitan Sydney.
The NSW Government and Sydney Ports has ashared objective of achieving a 40 per cent rail mode
share for containers that are transported into and
out of Port Botany. Sydney Ports has developed a
rail simulation model as a tool to test the suitability
of various scenarios in meeting the rail mode share
target. A number of initiatives have been identified to
increase the role of rail in meeting the freight task for
metropolitan Sydney. In supporting these initiatives,
the key is to encourage market forces to drive the
modal shift towards rail in a sustainable manner.
This requires clear policy and investment in certain
network infrastructure to provide the platform for rail
to compete efficiently.
Figure 3: Port Botany rail volumes (1997/98 to 2007/08)
300
350
250
200
150
TEUs(000)
100
50
01997/98 1998/99 1999/00 2000/01 2001/02 2002/03 2003/04 2004/05 2005/06 2005/06 2007/08
FORECAST
A key element in logistics planning for metropolitan Sydney is
maximising the use of rail. The ability of this mode to transport large
volumes offers industry a transport mode that has a higher level of
efficiency, competitive usage costs, reduced environmental impactsand less road congestion.
Sydney Ports Corporation
3. Maximising the use of rail
infrastructure in servicing the port
8/6/2019 Port Freight Logistics Plan
12/28
12
Sydney Ports Corporation
3.1. Enhancing rail access and
operations at Port Botany
A key component in maximising the use of rail
infrastructure is to ensure that Port Botany can cater
for projected demand. A number of initiatives have
been identified that can enhance rail access and
operations, as well as assist in encouraging a higher
mode share for rail of containers entering and leaving
Port Botany.
Port Botany container terminals
This area covers the movement of train services
between Botany Yard to the DP World and Patrick
container terminals. A number of initiatives have been
identified that will improve the efficiency and reliability
of these movements:
Continuing productivity improvements in loading
and unloading containers at stevedore container
terminals. Areas of future focus include stevedore
sidings to accommodate 600 metre train lengths,
introduction of improved rail handling equipment andtechnology by stevedores to handle larger container
volumes and implementation of separate shuttle
services to each stevedores sidings.
Provision of crossover to access the DP World
terminal to increase capacity for DP World rail
operations as this is currently impeded by single
line access. This will reduce the number and
duration of delays for DP World when a train is
waiting on the rail corridor for entry or exit into
Patrick container terminal.
Closure of the Interterminal Access Road rail
level crossing and construction of a grade
separated junction.
Providing rail infrastructure to support the use of
rail by the operator of the third container terminal at
Port Botany. Sydney Ports will provide an additional
track from Botany Yard to the new terminal that
offers a flexible and efficient arrangement for
prospective users.
Botany yard
Botany Yard is located just outside the port precinct.
The role of Botany Yard is to receive freight trains prior
to exchanging containers at the stevedore sidings
(imports and exports) , depart trains along the Port
Botany Freight Line to Cooks River, Enfield and the
metropolitan rail network, and control the access of
trains into and out of the yard, Patrick PortLink yard
and the container terminal sidings. The anticipated
increase in the number of containers transported by
rail will place limitations on effective performance of
the yard, including the availability of track to allow for
the staging and through movement of train services,
suitable lengths of sidings to support standardised
train services, and operational arrangements that allow
for timely and efficient movement of train services
into and out of the yard. A number of initiatives are
proposed over the next five years to support a greater
number of train movements:
Fostering closer management of rail operations
between the Botany Yard and rail sidings at
the container terminals. This includes ongoing
involvement in planning and managing train paths
and stevedore window allocations by Sydney Ports,
RailCorp, Australian Rail Track Corporation (ARTC),
DP World and Patrick.
Agreeing to a standardised train length consist
(600 metres) that reduces shunting and checking
trains.
Providing dedicated trains between each Port
Botany container terminal and metropolitan
intermodal terminals, subject to economically
feasible volumes.
Provision of additional track and infrastructure
in Botany Yard, including lengthening of sidings,
additional through tracks and signalling upgrade.
These works will cater for an increase in the
number of train movements to the port and
support standardised train lengths of 600 metres.
3. Maximising the use of rail infrastructure in servicing the port
Sydney Ports Corporation
8/6/2019 Port Freight Logistics Plan
13/28
13
Sydney Ports Corporation
Port Botany Freight Line
The Port Botany Freight Line covers the length of
dedicated freight railway between Port Botany and
Enfield/Chullora in central-west Sydney. A number of
initiatives are proposed to ensure that rail operations
can cater for future movements into and out of the
port, as well as supporting more reliable and efficient
operations at pinch points:
Closure of Banksia Road pedestrian crossing onthe Port Botany Freight Line and construction of a
pedestrian overbridge to enhance operational safety.
Closure of General Holmes Drive level crossing
and (if required) investigation and construction of
alternate road access to minimise conflicts between
trains and vehicles, as well as eliminating a speed
restriction to the efficient operation of the Port
Botany Freight Line.
Refining access into and out of the Cooks River
intermodal facility through improved coordination
and infrastructure to minimise conflicts on through
movements along the Port Botany Freight Line.
Permitting use of tracks within the Enfield
Marshalling Yards as a common-user facility for rail
freight operators to stage trains which will improve
the efficient management of train services to and
from Port Botany, particularly through the passenger
curfews for regional trains and those metropolitan
intermodal terminals not on the dedicated
freight network.
Commitment to complete the duplication of the Port
Botany Freight Line between Mascot and Cooks
River or equivalent works to provide the necessary
track capacity to meet projected demand. Railmodelling undertaken by Sydney Ports indicates that
this work would be required within the next five to
eight years.
3.2. Upgrading rail freight corridors in
metropolitan Sydney
The anticipated growth in the volume of containerised
freight moved by rail will place more pressure on
existing rail arrangements. Along the metropolitan
rail corridors where freight trains share the network
with passenger trains, priority is given to passenger
services. This represents a significant constraint to
rail freight efficiency, particularly during the peakcommuter hours and when curfews prevent any
activities by freight trains on the metropolitan rail
network. As a consequence of these constraints,
reliability decreases from 80 per cent to 30 per cent
between Newcastle and Sydney and from 60 per cent
to 40 per cent between Macarthur and Sydney.
The planning and development of rail freight corridors,
including infrastructure design and land preservation,
is needed to improve access within the Sydney
metropolitan area and linkages north to Brisbane and
south to Melbourne. Action in this area will encourage
greater interest in using rail by customers andoperators by improving the reliability of freight train
movements. A number of projects under consideration
by government will enhance rail freight movements in,
out and within the Sydney metropolitan area:
Southern Sydney Freight Line a bi -directional
freight priority line between Macarthur and Sefton
to allow additional train movements between
Port Botany and freight distribution activities in
south-west Sydney. This project is planned to be
completed in 2009 to ensure that sufficient train
paths are available to meet projected growth in
rail mode share.Northern Line Upgrade a rail grade separation in
the vicinity of North Strathfield to allow Up trains
to access the metropolitan freight network without
the need to cross Down tracks, completion of full
quadruplication between North Strathfield and
West Ryde and dedicated freight access between
metropolitan Sydney and Newcastle. This project
will allow for additional train movements between
Port Botany and freight distribution activities in north
and west Sydney.
3. Maximising the use of rail infrastructure in servicing the port
Sydney Ports Corporation
8/6/2019 Port Freight Logistics Plan
14/28
14
Sydney Ports Corporation
3.3. Intermodal terminal development to
support rail movements
The need to expand the intermodal network within
Sydney is a prerequisite for the greater use of rail.
An intermodal terminal is a facility that allows for
the loading and unloading of containers and general
cargo between road and rail based transport.
These facilities are used for container movements
to/from the port and between different states. TheSydney metropolitan area comprises of a number of
intermodal terminals that serve port and interstate
movements. Analysis of container movements by the
Sea Freight Council of NSW in their February 2004
report New South Wales Import Export Container
Mapping Studyindicates that areas in the central-
west, south-west and west of metropolitan Sydney
account for 70 per cent of full import and 34 per cent
of full export container movements. The growth in
container volumes and improvements to transport
capacity can support the development of additional
intermodal terminals.
The Metropolitan Strategyoutlines a proposed network
of additional intermodal terminals in the central-west,
south-west and west of metropolitan Sydney to meet
predicted demand (Figure 4). These facilities are
proposed at Enfield, Moorebank and Eastern Creek
respectively. The NSW Government endorsed plans
for this metropolitan Sydney intermodal network in
May 2007. There are also other proposed intermodal
facilities being undertaken by the private sector,
including an expansion of the Macarthur Intermodal
Shipping Terminal at Minto and a joint venture
arrangement between Kaplan Investment Funds,
QR National and Stocklands for a new intermodal
facility at Moorebank.
The proposed intermodal terminals would have a
number of common elements to meet the required
freight logistics task. There would be direct rail links
(dedicated or shared) to Port Botany. Road transport
will provide and deliver containers and goods to
destinations within the catchment area. The inclusion
of warehousing and freight support services within the
site also provides an opportunity to reduce the number
of large truck movements within local communities.
Sydney Ports has developed a proposal for an
Intermodal Logistics Centre at Enfield that provides
an intermodal facility to cater for demand generated in
central-west Sydney. It is envisaged that this would be
one of the initial intermodal terminals implemented as
part of the proposed metropolitan intermodal network
for Sydney. Planning approval for the facility was given
by the NSW Government in September 2007. It is
envisaged that the facility will be operational by 2011.
3. Maximising the use of rail infrastructure in servicing the port
8/6/2019 Port Freight Logistics Plan
15/28
15
Sydney Ports Corporation
94
Figure 4: Proposed intermodal network for metropolitan Sydney
3. Maximising the use of rail infrastructure in servicing the port
Existing intermodal terminals
Possible intermodal terminals
Proposed dedicated freight rail lines
Existing dedicated freight rail lines
Shared passenger freight rail lines
Motorway network
Ports
Employment lands
Planned employment lands
Potential employment lands for investigation
Existing urban area
Note: Chullora Intermodal Terminal is dedicated to interstate and regional freight.
December 2005 Source: NSW Department of Planning
8/6/2019 Port Freight Logistics Plan
16/28
16
Sydney Ports Corporation
Logistics planning also requires an acknowledgement that road
transport will continue to support the majority of freight movements
within metropolitan Sydney. Recent extensions to the motorway
network have improved accessibility between Port Botany and keydistribution and industrial areas across Sydney.
Sydney Ports Corporation
Figure 5: Port Botany truck arrivals by hour of day
4. Minimising truck movements in
servicing the port
Nevertheless, this infrastructure is shared with
commuter vehicles and can have heavy traffic volumes
during peak periods. An increase in the volume of
freight will translate into an increase in the number of
trucks using the road system. While the future number
of port trucks on the road will continue to represent
a low proportion when compared to total traffic
(between 1 per cent and 2 per cent), it is important
that this growth be accommodated in future road
network planning.
0:00
2:00
4:00
6:00
8:00
10:00
12:00
14:00
16:00
18:00
20:00
22:00
1:00
3:00
5:00
7:00
9:00
11:00
13:00
15:00
17:00
19:00
21:00
23:00
10
8
7
6
Percent
5
4
0
Time
3
2
1
92004 20071999
8/6/2019 Port Freight Logistics Plan
17/28
17
Sydney Ports Corporation
4.1. Optimising road operations at
Port Botany
A number of initiatives have been identified that can
optimise road operations at the port, thereby making
the most productive use of road infrastructure and
operational resources.
Encouraging truck movements away from
peak periods
Analysis by Sydney Ports indicates that a trend
towards truck movements away from peak periods
is emerging (Figure 5). There is also a proportionate
increase in truck movements on weekends
(Figure 6). This trend has been accompanied by
reductions in truck turnaround times during a period
of strong container growth. The anticipated increase
in truck volumes over the next few years will require
a further shift towards operations on a 24 hour,
seven day a week basis.
Introduction of high efficiency container
trucks in Port Botany
Sydney Ports is seeking approval from the Roads
and Traffic Authority (RTA) for the use of high
efficiency container trucks (HECT) in a defined area
within the Port Botany precinct. These vehicles offer
additional container capacity per vehicle and provide
measurable operational efficiencies for the movement
of containers within the port precinct. No operationalimpediments have been identified that could hinder
the effective operation of high efficiency container
trucks. The introduction of high efficiency container
trucks will facilitate improved container terminal
operation and provide more reliable delivery times,
thereby offering greater operating efficiencies for
importers and exporters in receiving and delivering
their cargo. The Port of Melbourne and the Port of
Brisbane already use high efficiency container trucks
within their port precincts.
Figure 6: Port Botany truck arrivals by day of week
4. Minimising truck movements in servicing the port
Monday
25
15
10
5
Percent
0
Tuesday Wednesday Thursday FridayDay of week
Saturday Sunday
202004 20071999
8/6/2019 Port Freight Logistics Plan
18/28
18
Sydney Ports Corporation
Road enhancements in Port Botany
A number of incremental operational and minor
infrastructure road enhancements have been
identified that can provide for better traffic flows and
management to cater for current and future volumes:
A new road access point at Foreshore Road to
support the new container terminal expansion.
This new road will enable traffic generated by the
new terminal to avoid the Penrhyn Road/BotanyRoad/Foreshore Road intersection, thereby avoiding
potential capacity problems at this intersection.
The new road will also facilitate a reduction in the
number of port trucks using Botany Road north of
Foreshore Road. This road is the main access route
for port traffic into and out of the port.
The progressive updating of traffic management
plans for individual sites at Port Botany port to
mitigate and manage truck queuing and access
arrangements.
Sydney Ports will work with other government
agencies to analyse short and long termimprovements to intersection performance, truck
staging areas and contingency management for
Port Botany roads. These proposals would assist in
managing truck movements that balances the need
for operational efficiency and community amenity.
Construction of the proposed extension of Hale
Street by a private developer at Botany to Foreshore
Road. This will allow for direct truck access to Port
Botany. The new road will also facilitate a reduction
in the number of port trucks using Botany Road
north of Foreshore Road. This road is the main
access route for port traffic into and out of the port.
Operating hours of port
logistics industries
The stevedoring terminals at Port Botany operate
on a 24 hours per day, seven days per week basis
(24/7). The other parties in the transport chain for
containerised cargo operate varied hours, with many
businesses continuing to operate on a business
hours/Monday to Friday basis. The latter situation
means that resources, including transportinfrastructure and equipment, are under utilised.
This issue was examined by the Sea Freight Council
of NSW in the report released in January 2005 titled
Freight Supply Chain Coordination of Working
Arrangements.
Industry has identified that an extension of the
operating hours by an increased number of
organisations would provide efficiencies in the
transport chain as well as improved use of freight
transport infrastructure, such as the road network, in
non-peak periods. Government and industry should
continue to work together to implement strategies tospread the working hours of those organisations in the
freight transport chain. The introduction of incentives
and/or penalties may be considered to encourage a
change in operating practices.
4. Minimising truck movements in servicing the port
8/6/2019 Port Freight Logistics Plan
19/28
19
Sydney Ports CorporationSydney Ports Corporation
4.2. Increasing truck efficiency to
minimise road movements
Government and industry are working together to
identify and implement a range of measures that
improve truck efficiency and reduce unnecessary
road movements.
Higher Mass Limits (HMLs)
The NSW Government introduced the Higher MassLimit (HML) network from July 2006. HML allows
eligible road carriers to operate at increased mass limits
compared to statutory limits (Table 3). Road carriers
have to be accredited under the mass management
module of the National Heavy Vehicle Accreditation
Scheme (NHVAS). Continual maintenance of a
vehicles suspension is a requirement for NHVAS
accreditation. This initiative offers greater truck
efficiency while ensuring that the integrity of road
network infrastructure is maintained.
The NSW Government has also approved a number
of roads within metropolitan Sydney where HML
vehicles can operate and also cover other roads within
a 10 kilometre radius where the destination is in a
defined industrial zone. These include:
Princes Highway (from intersection with
King Georges Road) F6 Freeway.
F3 Freeway.
M4 Motorway (west of the M7 interchange) Great Western Highway (west of the M4 Motorway).
M5 Motorway General Holmes Drive
Foreshore Road (to Port Botany).
M7 Motorway (M7 Motorway to Pennant Hills
Road) M2 Motorway Pennant Hills Road
(M2 Motorway to F3 Freeway).
King Georges Road Roberts Road.
4. Minimising truck movements in servicing the port
Vehicle
configuration
Standard (Gross)
Mass Limit
Higher Mass Limit
(HML)
Payload increase
(higher compared
to standard)
19 metre (6 axle)
semi-trailer
42.5 tonnes 45.5 tonnes 10 per cent
25 metre (9 axle)
B-double
62.5 tonnes 68 tonnes 13 per cent
Table 3: Higher Mass Limits of approved NSW roads
8/6/2019 Port Freight Logistics Plan
20/28
20
Sydney Ports Corporation
Mechanisms to support better truck
scheduling and utilisation
A number of operational and technological
improvements have been implemented by industry,
such as vehicle booking system and automation of
truck scheduling processes, which has delivered
real benefits in managing truck scheduling and
utilisation. This improvement can be seen in average
truck turnaround times per truck at the Port Botanycontainer terminals, which have decreased from an
hour in 2000 to 50 minutes in 2007.
Government and industry will continue to examine
and progressively introduce a range of mechanisms to
allow for even more efficient use of container trucks,
including:
Delivering an export container or an empty container
to the port precinct and collecting an import
container in the same journey (backloading).
Investing in equipment that can assist trucking
operations such as global positioning systems,
transponders and web camera technology.
Enhancing computer systems, such as vehicle
booking systems.
Supporting greater use of electronic bulletin boards
and SMS technology to disseminate up-to-date
information on port activities and operational delays.
Facilitating greater use of electronic commerce to
eliminate paper documentation.
Examining greater use of technology to assist with
container examination by the border protection
agencies.
Continuing conformance to the introduction of the
Road Transport (General) Act 2005, which defines
mass, dimension and load restraint requirements
for vehicles.
4.3. Expanding road freight corridors in
metropolitan Sydney
The Metropolitan Strategyincludes a careful
examination of transport needs. The objectives in the
Strategy include improving the efficiency of all types
of freight movements in Sydney and connecting the
metropolitan regions with the economic gateways,
namely Port Botany and Sydney Airport. Sydney Ports
supports the examination of proposals to improve theroad connections between Port Botany and Western
Sydney, including an eastern extension of the
M4 Motorway and an increase to the capacity
of the M5 Motorway. These will be important
initiatives to ensure that landside logistics meets
long-term demand.
4. Minimising truck movements in servicing the port
8/6/2019 Port Freight Logistics Plan
21/28
21
The Port Freight Logistics Plan provides a framework to meet the
challenges of managing port activities in light of anticipated demand.
Figure 7: Sydney Ports stakeholder relationships
Transport Chain
Sydney Ports Users Consultative Group
Sydney Ports Cargo Facilitation Committee
Industry Groups
NSW Sea Freight Council
Australian Logistics CouncilShipping Australia
Transport Industry Associations
Government Agencies
Ministry of Transport
RailCorp
Roads and Traffic Authority
Local Councils
Australian Rail Track Corporation
Rail Groups
Botany Rail Steering Group
Botany Rail Operations Group
Botany Corridor/Botany Rail Yard/Container Terminals Interface
Group (joint working group)
Sydney Ports Corporation
Sydney Ports Corporation
The Plan discusses existing port operations, initiatives
to maximise the use of rail, and initiatives to minimisethe impact of truck movements generated by the port.
Sydney Ports believes that the matters and issues
discussed in the Plan will assist in improving port
freight logistics to the benefit of the port, industry
and the community.
5.1. Consultation
The successful implementation of the Port Freight
Logistics Plan requires close collaboration between
Sydney Ports and all stakeholders in the logistics
chain, including stevedores, rail operators, the road
haulage industry, importers, exporters, the forwarding
community and related government agencies. Sydney
Ports already works with a number of industry and
government stakeholders to resolve strategic and
operational matters and issues related to port freight
logistics (Figure 7). These relationships will be pivotal
in progressing with the successful implementation of
the Port Freight Logistics Plan.
5.2. Deliverable milestones
A number of initiatives have been identified in Sections
3 and 4 that have been included in an implementation
program to ensure best practice efficient and
advanced port freight logistics. The initiatives
included within the implementation program offer
discrete and incremental operational, technological
and administrative improvements to maximise the
use of rail infrastructure and improve the scheduling
and utilisation of container truck movements.
These initiatives also need to consider and address
environmental impacts as appropriate. The deliverable
milestones of the program are categories as short
term (20082009), medium term (20102012), longterm (20132016) and ongoing. The milestones related
to the implementation program to maximise the use of
rail are provided in Table 4. The milestones related to
measures to improve the scheduling and utilisation of
container truck movements are provided in Table 5.
5. Implementation program
8/6/2019 Port Freight Logistics Plan
22/28
22
Sydney Ports Corporation
5.3 Reforming Port Botanys links with
inland transport Independent
Pricing and Regulatory Tribunal
The NSW Government commissioned a review by
the Independent Pricing and Regulatory Tribunal
(IPART) into the Interface between the Land Transport
Industries and the Stevedores at Port Botany.
On 18 March 2008, the Independent Tribunal released
its final report titled Reforming Port Botanys Links
with Inland Transport. The Independent Tribunal
has made 18 recommendations to improve port
performance.
A number of recommendations relate to the vehicle
booking system, Port Botany Rail Logistics team and
road transport industry matters.
At the time of publishing the NSW Government was
reviewing the recommendations and preparing a
response. Sydney Ports will have a key role to play in
the implementation of the agreed recommendations.
5. Implementation program
* Definition of timing: short term (20082009); medium term (20102012); long term (20132016).
Table 4: Implementation program to maximise the use of rail infrastructure
Enhancing rail access and operations at Port Botany
Program initiative Stakeholder(s) Timing*
Fostering closer management of rail operations
between the Botany Yard and rail sidings on
stevedores container terminals
Sydney Ports, RailCorp, Australian Rail
Track Corporation, DP World, Patrick
Short term
Provision of infrastructure improvements to Botany
Yard to support future growth and
improve access to the container terminals
Sydney Ports, Ministry of Transport,
RailCorp, Australian Rail Track
Corporation, DP World, Patrick
Short term
Medium term
Refining coordination and signalling infrastructure
to support efficient access into and out of the
Cooks River intermodal facility
Sydney Ports, Ministry of Transport,
RailCorp, Australian Rail Track
Corporation
Short term
Medium term
Permitting use of tracks within the Enfield
Marshalling Yards as a common-user facility
for rail freight operators to stage trains
Ministry of Transport, RailCorp,
Australian Rail Track Corporation
Short term
Medium term
Closure of Banksia Road pedestrian crossing
on the Botany Goods Line and construction
of a pedestrian overbridge
Sydney Ports, Ministry of Transport Medium term
Continuing productivity improvements in
container handling at container terminals
DP World, Patrick Medium term
Agreeing to a standardised train length
consist (600 metres) that reduces shunting
and checking trains
Sydney Ports, RailCorp, Australian
Rail Track Corporation, DP World and
Patrick
Medium term
Provision of additional track and infrastructure in
Botany Yard to cater for increase in train
movements and 600 metre train lengths
RailCorp, Australian Rail Track
Corporation
Medium term
Closure of the Interterminal Access Road
rail level crossing and construction of a grade
separated junction
Sydney Ports, RTA, Railcorp, Australian
Rail Track Corporation
Medium term
8/6/2019 Port Freight Logistics Plan
23/28
23
Sydney Ports Corporation
Upgrading rail freight corridors in metropolitan Sydney
Program initiative Stakeholder(s) Timing*
Closure of General Holmes Drive level crossing and
construction of alternate road access
Ministry of Transport, Roads and
Traffic Authority, RailCorp, Australian
Rail Track Corporation
Medium term
Providing rail infrastructure to support the use
of rail by the operator of the third container terminalat Port Botany
Sydney Ports Medium term
Complete the duplication of the Botany Goods Line
between Mascot and Cooks River or equivalent
works to provide track capacity
Ministry of Transport, RailCorp,
Australian Rail Track Corporation
Long term
Construction of Southern Sydney Freight Line
between Macarthur and Sefton Junction
Australian Rail Track Corporation Short term
Medium term
Complete rail grade separation on Main North
Line (at North Strathfield) to segregate freight and
passenger train movements
Ministry of Transport, RailCorp,
Australian Rail Track Corporation
Medium term
Long term
Completion of full quadruplication on Main North
Line (North Strathfield and West Ryde)
Ministry of Transport, RailCorp,
Australian Rail Track Corporation
Medium term
Long term
Dedicated freight access on Main North Line
(West Ryde to Newcastle)
Ministry of Transport, RailCorp,
Australian Rail Track Corporation
Long term
Intermodal terminal development to support rail movements
Program initiative Stakeholder(s) Timing*
Progressive development and/or enhancement of
private sector port related intermodal terminals
Private sector Ongoing
Completion of Enfield ILC Sydney Ports Medium term
Completion of Moorebank Intermodal Terminal Ministry of Transport Long term
* Definition of timing: short term (20082009); medium term (20102012); long term (20132016).
5. Implementation program
Table 4: Implementation program to maximise the use of rail infrastructure (continued)
8/6/2019 Port Freight Logistics Plan
24/28
24
Sydney Ports Corporation
Optimising road operations at Port Botany
Program initiative Stakeholder(s) Timing*
Updating traffic management plans for individual
sites at Port Botany port to mitigate and manage
truck queuing and access arrangements
Sydney Ports Ongoing
Introduction of High Efficiency Container Trucks in
Port Botany, subject to approval by the Roads andTraffic Authority
Sydney Ports, Roads and Traffic
Authority, Australian TruckingAssociation
Short term
A new road access point at Foreshore Road to
support the new container terminal expansion
Sydney Ports, Roads and Traffic
Authority
Short term
Medium term
Construction of the proposed Hale Street extension
to Foreshore Road
EG Property Group, Sydney Ports,
Roads and Traffic Authority
Short term
Medium term
Analyse improvements to intersection performance,
truck staging areas and contingency management for
Port Botany roads
Sydney Ports, Roads and Traffic
Authority, City of Botany Bay, Randwick
City Council
Short term
Medium term
Encouraging truck movements away from peak
periods
Sydney Ports, DP World, Patrick,
Australian Trucking Association, Sydney
Ports Cargo Facilitation Committee
Medium term
Extension of operating hours of port logistics
industries
Sydney Ports Cargo Facilitation
Committee
Medium term
Increasing truck efficiency to minimise road movements
Program initiative Stakeholder(s) Timing*
Continuing conformance to the introduction of the
Road Transport (General) Act 2005, which defines
mass, dimension and load restraint requirements
for vehicles
Roads and Traffic Authority, Australian
Trucking Association, Sydney Ports
Cargo Facilitation Committee
Ongoing
Investing in equipment that can assist trucking
operations including webcams
Private sector, Sydney Ports Ongoing
Reducing barriers to backloading in the port precinct DP World, Patrick, Sydney Ports CargoFacilitation Committee
Medium term
Enhancing computer systems, such as vehicle
booking systems
DP World, Patrick Medium term
Supporting greater use of electronic bulletin boards
and short message services (SMS) to disseminate
up-to-date information on port activities and
operational delays
DP World, Patrick, Sydney Ports Cargo
Facilitation Committee
Medium term
Facilitating greater use of electronic commerce to
eliminate paper documentation
Sydney Ports Cargo Facilitation
Committee
Medium term
Examining greater use of technology to assist with
container examination by the border protection
agencies
Sydney Ports Cargo Facilitation
Committee
Medium term
5. Implementation program
Table 5: Measures to improve the scheduling and utilisation of container truck movements
* Definition of timing: short term (20082009); medium term (20102012); long term (20132016).
8/6/2019 Port Freight Logistics Plan
25/28
25
Sydney Ports Corporation
Expanding road freight corridors in metropolitan Sydney
Program initiative Stakeholder(s) Timing
Consideration of proposals regarding an eastward
extension of the M4 Motorway
Ministry of Transport, Roads and
Traffic Authority
Ongoing
Consideration of proposals regarding enhancements
to the M5 Motorway
Ministry of Transport, Roads and
Traffic Authority
Ongoing
* Definition of timing: short term (20082009); medium term (20102012); long term (20132016).
5. Implementation program
Table 5: Measures to improve the scheduling and utilisation of container truck movements (continued)
5.4. Efficiency Indicators
The effectiveness of the port freight logistics
framework can be monitored though the development
of key indicators to determine any improvements in
the efficiency of the movement of freight. A number of
draft indicators have been identified for port operations,
rail transport, road transport and empty container parks
to provide some information on progress made in the
movement of containers (Table 6). The indicators for
2001 and 2006 are from actual aggregated information
provided by the stevedores. The indicators for 2011 and
2016 are estimated values that have been developed
through projections by Sydney Ports relating to
container throughput and may be reviewed due to
changing circumstances. Information on the indicators
will also be compiled by Sydney Ports on an
annual basis.
8/6/2019 Port Freight Logistics Plan
26/28
26
Sydney Ports Corporation
Table 6: Indicative Sydney Ports freight logistics efficiency indicators at Port Botany (Table to be reviewed)
Indicator 2001 2006 2011 2016
Portope
rations
Crane rate (lifts/hour) 24.8 26.8 28.0 30.0
Ship rate (lifts/hour) 40.5 46.5 48.0 50.0
Total containers (TEU) 890,000 1,440,000 1,750,000 2,200,000
Import containers (TEU) 475,000 740,000 962,500 1,210,000
Export containers (TEU) 415,000 700,000 787,500 990,000
20 containers (per cent) 50 per cent 40 per cent 35 per cent 35 per cent
40 containers (per cent) 50 per cent 60 per cent 65 per cent 65 per cent
Empty export containers
(per cent of all containers)
8/6/2019 Port Freight Logistics Plan
27/28
27
Sydney Ports Corporation
Table 7: Development Consent Conditions for the Port Botany third terminal expansion
Development Application
DA-494-11-2003-I, lodged by
Sydney Ports Corporation with
the Department of Planning
on 26 November 2003, for the
construction and operation of
a new container terminal and
associated infrastructure
Stage 1 development consent
approved by the Minister for
Planning on 13 October 2005
A2.4 Prior to the commencement of construction, the applicant shall prepare,
and submit, for the approval of the Minister, a Port Freight Logistics Plan which:
a) Examines existing container freight logistics and identifies areas for
improvement in the efficiency of container movements and rail interfacing
through operational, technological or administrative changes;
b) Proposes and develops an implementation program to maximise the use of
rail infrastructure;
c) Proposes and develops measures to improve the scheduling and utilisation ofcontainer truck movements so as to minimise the number of trucks attending
the port and truck turnaround times; and
d) Proposes an implementation program (including deliverable milestones and
efficiency indicators) so as to ensure efficient and advanced port freight
logistics consistent with best practice.
The plan must be submitted and approved by the Minister prior to the
commencement of construction.
Development Application
DA-494-11-2003-I, lodged by
Sydney Ports Corporation with
the Department of Planning
on 26 November 2003, for the
construction and operation of
a new container terminal and
associated infrastructure
Stage 2 development consent
approved by the Minister for
Planning on 22 August 2006
A1.4 The scope of the Port Freight Logistics Plan required under condition A2.4
of the development consent granted by the Minister for Planning on 13 October
2005 with respect to development application DA-494-11-2003- I shall be
expanded to also address the following matters:
a) Consideration of the Botany Yard and any constraints on the yard with respectto capacity or timing of any necessary upgrade and/or expansion works;
b) The need and timing of any necessary upgrades and/or expansion works to
provide dedicated departure and arrival roads for the Botany Yard; and
c) A production line arrangement of separate shuttle services to each stevedore
siding for future operations, or other appropriate measure.
8/6/2019 Port Freight Logistics Plan
28/28
Disclaimer The information contained in this publication is produced in good faith and according to the knowledge available
to Sydney Ports Corporation at the time of publication. No warranty is given or representation made as to its accuracy..
Sydney Ports Corporation Port Freight Logistics Plan June 2008
Level 8, 207 Kent Street
Sydney NSW 2000, Australia
PO Box 25
Millers Point, NSW 2000, Australia
Telephone 61 2 9296 4999
Facsimile 61 2 9296 4742
www.sydneyports.com.au