Portable Ultrasonic Flow Meter (F-133P)

Technical Specifications of Main Body Flow Measurement Accuracy better than + 0.5%

Calorimetric Measurement

Accuracy 2%-3%

Working Power Supply built-in Ni-MH rechargeable battery, charging source 220V, which

supplies for up to 24 hours after charging.

Measuring Period: 500ms (2 times per second, and 128 groups of data collected during

each period)

Display 8 digits, 2 lines characters displayed on the same screen.

Thermal Loss Calculation beginning with 0.25K, temperature resolution: 0.01℃

Processing Temperature Range 4℃ ～ 95℃

Ambient Temperature -20℃～60℃

Signal Output isolated RS485

Communication Protocol MODBUS protocol, FUJI extension protocol

Printout Equipped with built-in integrated thermal printer, which can realize

real-time or timed printing.

Data Storage

The optional built-in data storage unit (SD card) can store time,

instantaneous flow, accumulative flow, signal status and etc. The data

can be transferred into the computer (only one from data storage and

printing functions can be selected).

Installation external application installation Self

-

Other Functions diagnosis to indicate whether the current working condition is

normal or not.

Self

Specifications of Clamp-on Sensor

Technical

parameters:

Standard S1

type

Standard M1

type

Standard L1

type

High-

temperature

S1H type

High-

temperature

M1H type

Applicable

pipe diameter

(DN) 15～100 50～700 100～10000 15～100 50～700

Material ABS Special high-temperature

material

Working

frequency IMHZ

Installation

method V (N、

W)method

V、Z

method Z method

V (N、W)method

V、Z method

Calibration Pairing & Calibrating for the complete machine

Magnetism Yes N/A

Applicable

temperature 0～70℃ 0℃～160℃

Protection

grade: IP65

Dimensions 45×30×30 60×45×45 80×70×55 90×85×24 90×82×29

Mass (gram) 75 250 650 94 150

Media type: Water, seawater, sewage, alcohol, various oils and other single, uniform and

stable liquid that can transmit ultrasonic wave

material mortar, polypropylene, polystyrene, bakelite, polytetrafluoroethylene etc.

Signal cable Standard configuration: 5mX2, and 10mX2 or 15mX2 are optional.

Medium

turbidity: ≤20000ppm with low bubble content

Applicable

pipes:

Uniform and compact pipes made of carbon steel, stainless steel, cast iron,

copper, PVC, aluminum, glass fiber reinforced plastics, and lining is

permitted.

Pipe lining Epoxy asphalt, rubber,