Date post: | 01-Apr-2016 |
Category: |
Documents |
Upload: | moneygall-glazing-accessories-ltd-glasspartscouk |
View: | 215 times |
Download: | 0 times |
Smooth cushioning, gentle closingAUTOCLOSE DESIGN SELECTCOMFORTSTOP
InnovatIon!
Portavant Glass fittings with logic
General notes:
Complete sets:The complete sets include the following number of ComforT SToP and AUTo CLoSE cushioning and self-closing mechanisms, in line with your requirements, and they are identified by the following icons: - 1 per sash for cushioning on one end- 2 per sash for cushioning on both ends- Without cushioning.
We deliver the profiles for the complete sets together in shock resistant cardboard packaging.
Profiles:If you sent us your order structured glass sliding door by glass sliding door, the track profiles and cover profiles will be packed, belonging to each sliding door, in pairs in shock resistant packing. In any other case, Willach reserves the right to pack the profiles in the best way to ensure a safe transport.
All prices are gross prices in € EX WorKS, according to Incoterms 2000, incl. packaging, without VAT or any other duties, levies and fees that might arise in your country.
Subject to modification.
Price list 06/2010
Choose the method of ordering which suits you best.
order option 2
Combine single components indi-vidually for your
Portavant systems.
Use the “Complete set” tab to compile
your order.
Use the “Single components” tab to compile your
order.
Use the already ready-to-use sets for your Portavant
systems.
order option 1
Complete sets with the required system compo-
nents such as tracks, cover profiles, accessory kits
and choice of cushioning option.
Single components
• Tracks• Cover profiles• Additional profiles such as floor-wall and ceiling profiles• Accessory kits• Accessories such as end plates & hair-bristle lining
Add optional acces-sories and handles
to the individu-ally combined single components to meet the requirements of
your installation.
Add optional acces-sories and handles
to the complete sets to meet the requi-
rements of your installation.
PortavantGlass fittings with logic
Select the Portavant solution to meet your needs in only three steps, using our complete sets.
Select installation situation, determine measurements.
1
Select optional accessories
32
Select complete set
PortavantGlass fittings with logic
Complete sets
1. Step: Select installation situation, determine measurements.
one sash pages13 - 16
two sashes pages17 - 20track fixed to ceiling
without side-light
one sash pages5 - 8
two sashes pages9 - 12
track fixed to wall
one sash pages21 - 26
two sashes pages27 - 32track fixed to ceiling
with side-light
one sash pages33 - 41
Installation in glass facade
21 3
Determination of measurements: track fixed to wall, systems with 1 sash
Your project measurements (mm)Clear width (building) = LW =
Calculation of glass widthA = LW + 70 =
Calculation of profile length(track & cover profile)C = A x 2 =
Your project measurements (mm)room height (upper edge of profile) = r =
Calculation of glass heightH1 = r - 43 =
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 xGlass thickness (without film)x 2,5 =
Number of possible cushioning systems as set out table
Examination of possible cushioning options
Length of track & cover profilefor your Portavant system
Maximum number of cushioning systems for your Portavant system
Calculation of glass width and profile length
Calculation of glass width and profile length
≤ 80 81–120
2x per sash
Without
Sash weight (kg)
Gla
ss w
idth
(mm
)
≥ 10
5072
0 –
1049
<
720
Without
1x per sash
2 31
PortavantGlass fittings with logic
track fixed towall
1 sash
5
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
Complete set, 1 sash 1996 mm 617 012.1996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
includes:
1x track profile for track fixed to wall
1x straight cover profile
1x accessory kit II „straight cover profile“
2996 mm 617 012.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 012.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 8).
Complete set, 1 sash 2996 mm 617 112.2996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to wall
1x straight cover profile
1x accessory kit II „straight cover profile“
1x complementary accessory kit A
cut to size in mm 617 112.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 8).
Complete set, 1 sash 1996 mm 617 212.1996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to wall
1x straight cover profile
1x accessory kit I „straight cover profile“
2996 mm 617 212.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 212.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 8).
Complete sets: track fixed to wall, 1 sash, “straight cover profile”
21 3
track fixed towall
1 sash
1x per sash
2x per sash
Without
6
Complete sets: track fixed to wall, 1 sash, “rounded cover profile”
Complete set, 1 sash 1996 mm 617 010.1996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
includes:
1x track profile for track fixed to wall
1x rounded cover profile
1x accessory kit II „rounded cover profile“
2996 mm 617 010.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 010.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 8).
Complete set, 1 sash 2996 mm 617 110.2996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to wall
1x rounded cover profile
1x accessory kit II „rounded cover profile“
1x complementary accessory kit A
cut to size in mm 617 110.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 8).
Complete set, 1 sash 1996 mm 617 210.1996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to wall
1x rounded cover profile
1x accessory kit I „rounded cover profile“
2996 mm 617 210.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 210.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 8).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed towall
1 sash
1x per sash
2x per sash
Without
7
Accessories
You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed towall
1 sash
8
Determination of measurements: track fixed to wall, systems with 2 sashes
Your project measurements (mm)Clear width (building) = LW =
Calculation of glass width
A = LW/2 + 33 =
Calculation of profile length(track & cover profile)C = A x 4 + 4 =
Your project measurements (mm)room height (upper edge of profile) = r =
Calculation of glass heightH1 = r - 43 =
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 xGlass thickness (without film)x 2,5 =
Number of possible cushioning systems as set out table
Examination of possible cushioning options
Length of track & cover profilefor your Portavant system
Maximum number of cushioning systems for your Portavant system
Calculation of glass width and profile length
Calculation of glass width and profile length
≤ 80 81–120
2x per sash
Without
Sash weight (kg)
Gla
ss w
idth
(mm
)
≥ 10
5072
0 –
1049
<
720
Without
1x per sash
2 31
PortavantGlass fittings with logic
track fixed towall
2 sashes
9
Complete sets: track fixed to wall, 2 sashes, “straight cover profile”
Complete set, 2 sashes 3996 mm 617 012.3996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
per sash
includes:
1x track profile for track fixed to wall
1x straight cover profile
2x accessory kit II „straight cover profile“
5996 mm 617 012.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 012.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 12).
Complete set, 2 sashes 5996 mm 617 112.5996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitper sash
includes:
1x track profile for track fixed to wall
1x straight cover profile
2x accessory kit II „straight cover profile“
2x complementary accessory kit A
cut to size in mm 617 112.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 12).
Complete set, 2 sashes 3996 mm 617 212.3996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to wall
1x straight cover profile
2x accessory kit I „straight cover profile“
5996 mm 617 212.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 212.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 12).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
track fixed towall
2 sashes
1x per sash
2x per sash
Without
10
Complete sets: track fixed to wall, 2 sashes, “rounded cover profile”
Complete set, 2 sashes 3996 mm 617 010.3996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
per sash
includes:
1x track profile for track fixed to wall
1x rounded cover profile
2x accessory kit II „rounded cover profile“
5996 mm 617 010.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 010.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 12).
Complete set, 2 sashes 5996 mm 617 110.5996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitper sash
includes:
1x track profile for track fixed to wall
1x rounded cover profile
2x accessory kit II „rounded cover profile“
2x complementary accessory kit A
cut to size in mm 617 110.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 12).
Complete set, 2 sashes 3996 mm 617 210.3996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to wall
1x rounded cover profile
2x accessory kit I „rounded cover profile“
5996 mm 617 210.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 210.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 12).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed towall
2 sashes
1x per sash
2x per sash
Without
11
Accessories
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed towall
2 sashes
12
Determination of measurements: track fixed to ceiling, systems with 1 sash
Your project measurements (mm)Clear width (building) = LW =
Calculation of glass widthA = LW + 70 =
Calculation of profile length(track & cover profile)C = A x 2 =
Your project measurements (mm)room height (upper edge of profile) = r =
Calculation of glass heightH1 = r - 43 =
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 xGlass thickness (without film)x 2,5 =
Number of possible cushioning systems as set out table
Examination of possible cushioning options
Length of track & cover profilefor your Portavant system
Maximum number of cushioning systems for your Portavant system
Calculation of glass width and profile length
Calculation of glass width and profile length
≤ 80 81–120
2x per sash
Without
Sash weight (kg)
Gla
ss w
idth
(mm
)
≥ 10
5072
0 –
1049
<
720
Without
1x per sash
2 31
PortavantGlass fittings with logic
track fixed toceiling 1 sash
13
Complete sets: track fixed to ceiling, 1 sash, “straight cover profile”
Complete set, 1 sash 1996 mm 617 022.1996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
includes:
1x track profile for track fixed to ceiling
1x straight cover profile
1x accessory kit II „straight cover profile“
2996 mm 617 022.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 022.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 16).
Complete set, 1 sash 2996 mm 617 122.2996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x straight cover profile
1x accessory kit II „straight cover profile“
1x complementary accessory kit A
cut to size in mm 617 122.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 16).
Complete set, 1 sash 1996 mm 617 222.1996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x straight cover profile
1x accessory kit I „straight cover profile“
2996 mm 617 222.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 222.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 16).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
track fixed toceiling 1 sash
1x per sash
2x per sash
Without
14
Complete sets: track fixed to ceiling, 1 sash, “rounded cover profile”
Complete set, 1 sash 1996 mm 617 020.1996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
includes:
1x track profile for track fixed to ceiling
1x rounded cover profile
1x accessory kit II „rounded cover profile“
2996 mm 617 020.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 020.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 16); „rounded cover profile for rear side“ (see p. 16).
Complete set, 1 sash 2996 mm 617 120.2996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x rounded cover profile
1x accessory kit II „rounded cover profile“
1x complementary accessory kit A
cut to size in mm 617 120.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 16); „rounded cover profile for rear side“ (see p. 16).
Complete set, 1 sash 1996 mm 617 220.1996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x rounded cover profile
1x accessory kit I „rounded cover profile“
2996 mm 617 220.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 220.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 16); „rounded cover profile for rear side“ (see p. 16).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed toceiling 1 sash
1x per sash
2x per sash
Without
15
Accessories
are you using the „rounded cover profile“ on the front side of your sys-tem and do you want to produce the curved look on the rear side as well?
Rounded cover profile for rear side 1996 mm 617 500.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit
2996 mm 617 500.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 500.3996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 500.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). End plates for rear cover profile are not included in the accessory kits (see p. 16).
are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates?
End plate for „rounded cover profile& rounded cover profile for rear side“
617 250.0000.020 stainless steel
1 unit
track fixed to ceiling
left or right hand use Note: end plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed toceiling 1 sash
16
Determination of measurements: track fixed to ceiling, systems with 2 sashes
Calculation of glass width and profile length
Calculation of glass width and profile length
Your project measurements (mm)Clear width (building) = LW =
Calculation of glass widthA = LW/2 + 33 =
Calculation of profile length(track & cover profile)C = A x 4 + 4 =
Your project measurements (mm)room height (upper edge of profile) = r =
Calculation of glass heightH1 = r - 43 =
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 xGlass thickness (without film)x 2,5 =
Number of possible cushioning systems as set out table
Examination of possible cushioning options
Length of track & cover profilefor your Portavant system
Maximum number of cushioning systems for your Portavant system
≤ 80 81–120
2x per sash
Without
Sash weight (kg)
Gla
ss w
idth
(mm
)
≥ 10
5072
0 –
1049
<
720
Without
1x per sash
2 31
PortavantGlass fittings with logic
track fixed toceiling
2 sashes
17
Complete sets: track fixed to ceiling, 2 sashes, “straight cover profile”
Complete set, 2 sashes 3996 mm 617 022.3996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
per sash
includes:
1x track profile for track fixed to ceiling
1x straight cover profile
2x accessory kit II „straight cover profile“
5996 mm 617 022.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 022.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 20).
Complete set, 2 sashes 5996 mm 617 122.5996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitper sash
includes:
1x track profile for track fixed to ceiling
1x straight cover profile
2x accessory kit II „straight cover profile“
2x complementary accessory kit A
cut to size in mm 617 122.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 20).
Complete set, 2 sashes 3996 mm 617 222.3996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x straight cover profile
2x accessory kit I „straight cover profile“
5996 mm 617 222.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 222.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 20).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
track fixed toceiling
2 sashes
1x per sash
2x per sash
Without
18
Complete sets: track fixed to ceiling, 2 sashes, “rounded cover profile”
Complete set, 2 sashes 3996 mm 617 020.3996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
per sash
includes:
1x track profile for track fixed to ceiling
1x rounded cover profile
2x accessory kit II „rounded cover profile“
5996 mm 617 020.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 020.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. recommendation: hair-bristle lining (see p. 20); „rounded cover profile for rear side“ (see p. 20).
Complete set, 2 sashes 5996 mm 617 120.5996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitper sash
includes:
1x track profile for track fixed to ceiling
1x rounded cover profile
2x accessory kit II „rounded cover profile“
2x complementary accessory kit A
cut to size in mm 617 120.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. recommendation: hair-bristle lining (see p. 20); „rounded cover profile for rear side“ (see p. 20).
Complete set, 2 sashes 3996 mm 617 220.3996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x rounded cover profile
2x accessory kit I „rounded cover profile“
5996 mm 617 220.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 220.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. recommendation: hair-bristle lining (see p. 20); „rounded cover profile for rear side“ (see p. 20).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed toceiling
2 sashes
1x per sash
2x per sash
Without
19
Accessories
are you using the „rounded cover profile“ on the front side of your sys-tem and do you want to produce the curved look on the rear side as well?
Rounded cover profile for rear side 1996 mm 617 500.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit
2996 mm 617 500.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 500.3996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 500.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). End plates for rear cover profile are not included in the accessory kits (see p. 20).
are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates?
End plate for „rounded cover profile& rounded cover profile for rear side“
617 250.0000.020 stainless steel
1 unit
track fixed to ceiling
left or right hand use Note: end plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed toceiling
2 sashes
20
Calculation of profile length(track & cover profile)C = A x 2 =
Your project measurements (mm)room height (upper edge of profile) = r =
Calculation of glass heightSliding sash (mm)H1 = r - 43 =
Calculation of glass heightSide-light (mm)H2 = r - 63 =
Your project measurements (mm)Clear width (building) = LW =
Calculation of glass widthSliding sash (mm)A = LW + 35 =
Calculation of glass widthSide-light (mm)B = A + 35 =
Maximum number of cushioning systems for your Portavant system
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 xGlass thickness (without film)x 2,5 =
Number of possible cushioning systems as set out table
Examination of possible cushioning options
Length of track & cover profilefor your Portavant system
Calculation of glass width and profile length
Calculation of glass width and profile length
≤ 80 81–120
2x per sash
Without
Sash weight (kg)
Gla
ss w
idth
(mm
)
≥ 10
5072
0 –
1049
<
720
Without
1x per sash
Determination of measurements: track fixed to ceiling with side-light, 1 sash
2 31
PortavantGlass fittings with logic
track fixed to ceiling/Side-light
1 sash
21
Complete sets: track fixed to ceiling with side-light, 1 sash, “straight cover profile”
Complete set, 1 sash 1996 mm 617 026.1996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
includes:
1x track profile for track fixed to ceiling
1x straight cover profile for side-light
1x accessory kit II „straight cover profile“
2996 mm 617 026.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 026.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).
Complete set, 1 sash 2996 mm 617 126.2996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x straight cover profile for side-light
1x accessory kit II „straight cover profile“
1x complementary accessory kit A
cut to size in mm 617 126.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).
Complete set, 1 sash 1996 mm 617 226.1996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x straight cover profile for side-light
1x accessory kit I „straight cover profile“
2996 mm 617 226.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 226.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25), recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
track fixed to ceiling/Side-light
1 sash
1x per sash
2x per sash
Without
22
Complete sets: track fixed to ceiling with side-light, 1 sash, “rounded cover profile”
Complete set, 1 sash 1996 mm 617 024.1996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
includes:
1x track profile for track fixed to ceiling
1x rounded cover profile for side-light
1x accessory kit II „rounded cover profile“
2996 mm 617 024.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 024.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).
Complete set, 1 sash 2996 mm 617 124.2996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x rounded cover profile for side-light
1x accessory kit II „rounded cover profile“
1x complementary accessory kit A
cut to size in mm 617 124.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).
Complete set, 1 sash 1996 mm 617 224.1996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x rounded cover profile for side-light
1x accessory kit I „rounded cover profile“
2996 mm 617 224.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 224.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed to ceiling/Side-light
1 sash
1x per sash
2x per sash
Without
23
Accessories
Do you wish to frame the fixed side-lights of your system with a floor-wall profile?
Floor-wall-profile (U-profile) 1996 mm 617 520.1996.110 EV 1 1 unitfixed side-light, profile height 16 mm .120 C 31 1 unit
2996 mm 617 520.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 520.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 520.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 520.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 26); end plate (see p. 26).
Do you wish to extend the fixed side-lights of your system further than the track?
Ceiling profile (U-profile) 1996 mm 617 530.1996.110 EV 1 1 unitfixed side-light, profile height 35 mm .120 C 31 1 unit
Calculation of glass height at ceiling
profile (H3)
Your project measurements (mm)
room height (upper edge of profile) =
r = ________
Calculation of fixed sash glass height at
the ceiling profile (mm) =
H3 = r - 27 mm = ________
2996 mm 617 530.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 530.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 530.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 530.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 26); end plate (see p. 26).
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed to ceiling/Side-light
1 sash
24
Accessories
Do you wish to close the open slot for receiving the fixed side-light in the cover profile at the door opening with a special cover profile?
Cover profile 1996 mm 617 540.1996.110 EV 1 1 unitfixed side-light .120 C 31 1 unit
2996 mm 617 540.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 540.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizeNote: for clip-on on cover profiles for fixed side-light.
are you using the „rounded cover profile“ on the front side of your sys-tem and do you want to produce the curved look on the rear side as well?
Rounded cover profile for rear side 1996 mm 617 500.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit
2996 mm 617 500.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 500.3996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 500.length.110 EV 1 per m cut to size
.120 C 31 per m cut to size
Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). End plates for rear cover profile are not included in the accessory kits (see p. 25).
are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates?
End plate for „rounded cover profile with fixed side-light & rounded cover
617 251.0000.020 stainless steel
1 unit
profile for rear side“
track fixed to ceiling
left or right hand use
Note: End plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.
Figure Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed to ceiling/Side-light
1 sash
25
Accessories
are you using the floor-wall-profile and do you want to add end plates to the floor-wall-profile?
End plate for floor-wall-profile left or right hand use
617 257.0000.020 stainless steel
1 unit
are you using the ceiling profile and do you want to add end plates to the ceiling profile?
End plate for ceiling profileleft or right hand use
617 263.0000.020 stainless steel
1 unit
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
Do you wish to attach the fixed side-lights or other fixed glass sashes in the cover profile, the floor-wall-profile or the ceiling profile with a silicone gasket?
Silicone gasket for side-lightpacking unit = 50 m
glass thickness 8 mm
617 254.0000.000 transp. 1 m
617 254.0000.090 black 1 m
glass thickness 10 mm
617 255.0000.000 transp. 1 m
617 255.0000.090 black 1 m
glass thickness 12 mm
617 256.0000.000 transp. 1 m
617 256.0000.090 black 1 m
You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed to ceiling/Side-light
1 sash
26
Calculation of profile length(track & cover profile)C = A x 4 + 4 =
Your project measurements (mm)room height (upper edge of profile) = r =
Calculation of glass heightSliding sash (mm)H1 = r - 43 =
Calculation of glass heightSide-light (mm)H2 = r - 63 =
Your project measurements (mm)Clear width (building) = LW =
Calculation of glass widthSliding sash (mm)A = LW/2 + 33 =
Calculation of glass widthSide-light (mm)B = A + 35 =
Maximum number of cushioning systems for your Portavant system
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 xGlass thickness (without film)x 2,5 =
Number of possible cushioning systems as set out table
Examination of possible cushioning options
Length of track & cover profilefor your Portavant system
Calculation of glass width and profile length
Calculation of glass width and profile length
≤ 80 81–120
2x per sash
Without
Sash weight (kg)
Gla
ss w
idth
(mm
)
≥ 10
5072
0 –
1049
<
720
Without
1x per sash
Determination of measurements: track fixed to ceiling with side-light, 2 sashes
2 31
PortavantGlass fittings with logic
track fixed to ceiling/Side-light
2 sashes
27
Complete sets: track fixed to ceiling with side-light, 2 sashes, “straight cover profile”
Complete set, 2 sashes 3996 mm 617 026.3996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
per sash
includes:
1x track profile for track fixed to ceiling
1x straight cover profile for fixed side-
light
2x accessory kit II „straight cover profile“
5996 mm 617 026.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 026.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32).
Complete set, 2 sashes 5996 mm 617 126.5996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitper sash
includes:
1x track profile for track fixed to ceiling
1x straight cover profile for fixed side-
light
2x accessory kit II „straight cover profile“
2x complementary accessory kit A
cut to size in mm 617 126.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32).
Complete set, 2 sashes 3996 mm 617 226.3996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x straight cover profile for fixed side-
light
2x accessory kit I „straight cover profile“
5996 mm 617 226.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 226.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32), silicone gasket (see p. 32), end plates for floor-wall-, ceiling profile (see p. 32).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
track fixed to ceiling/Side-light
2 sashes
1x per sash
2x per sash
Without
28
Complete sets: track fixed to ceiling with side-light, 2 sashes, “rounded cover profile”
Complete set, 2 sashes 3996 mm 617 024.3996.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
per sash
includes:
1x track profile for track fixed to ceiling
1x rounded cover profile for fixed side-
light
2x accessory kit II „rounded cover profile“
5996 mm 617 024.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 024.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32); „rounded cover profile for rear side“ (see p. 31).
Complete set, 2 sashes 5996 mm 617 124.5996.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitper sash
includes:
1x track profile for track fixed to ceiling
1x rounded cover profile for fixed side-
light
2x accessory kit II „rounded cover profile“
2x complementary accessory kit A
cut to size in mm 617 124.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32); „rounded cover profile for rear side“ (see p. 31).
Complete set, 2 sashes 3996 mm 617 224.3996.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitincludes:
1x track profile for track fixed to ceiling
1x rounded cover profile for fixed side-
light
2x accessory kit I „rounded cover profile“
5996 mm 617 224.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 224.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
1) Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32); „rounded cover profile for rear side“ (see p. 31).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed to ceiling/Side-light
2 sashes
1x per sash
2x per sash
Without
29
Accessories
Do you wish to frame the fixed side-lights of your system with a floor-wall profile?
Floor-wall-profile (U-profile) 1996 mm 617 520.1996.110 EV 1 1 unitfixed side-light, profile height 16 mm .120 C 31 1 unit
2996 mm 617 520.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 520.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 520.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 520.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 32); end plate (see p. 32).
Do you wish to extend the fixed side-lights of your system further than the track?
Ceiling profile (U-profile) 1996 mm 617 530.1996.110 EV 1 1 unitfixed side-light, profile height 35 mm .120 C 31 1 unit
Calculation of glass height at ceiling
profile (H3)
Your project measurements (mm)
room height (upper edge of profile) =
r = ________
Calculation of fixed sash glass height at
the ceiling profile (mm) =
H3 = r - 27 mm = ________
2996 mm 617 530.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 530.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 530.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 530.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 32); end plate (see p. 32).
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed to ceiling/Side-light
2 sashes
30
Accessories
Do you wish to close the open slot for receiving the fixed side-light in the cover profile at the door opening with a special cover profile?
Cover profile 1996 mm 617 540.1996.110 EV 1 1 unitfixed side-light .120 C 31 1 unit
2996 mm 617 540.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 540.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizeNote: for clip-on on cover profiles for fixed side-light.
are you using the „rounded cover profile“ on the front side of your sys-tem and do you want to produce the curved look on the rear side as well?
Rounded cover profile for rear side 1996 mm 617 500.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit
2996 mm 617 500.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 500.3996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 500.length.110 EV 1 per m cut to size
.120 C 31 per m cut to size
Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). End plates for rear cover profile are not included in the accessory kits (see p. 31).
are you installing the rear curved co-ver profile in your system and do you want to equip it with end plates?
End plate for „rounded cover profile with fixed side-light & rounded cover
617 251.0000.020 stainless steel
1 unit
profile for rear side“
track fixed to ceiling
left or right hand use
Note: end plates for straight cover profiles or rounded cover profiles for fixed side-light with straight look on the rear side are included in the accessory sets. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.
Figure Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
track fixed to ceiling/Side-light
2 sashes
31
Accessories
are you using the floor-wall-profile and do you want to add end plates to the floor-wall-profile?
End plate for floor-wall-profileleft or right hand use
617 257.0000.020 stainless steel
1 unit
are you using the ceiling profile and do you want to add end plates to the ceiling profile?
End plate for ceiling profileleft or right hand use
617 263.0000.020 stainless steel
1 unit
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
Do you wish to attach the fixed side-lights or other fixed glass sashes in the cover profile, the floor-wall-profile or the ceiling profile with a silicone gasket?
Silicone gasket for side-lightpacking unit = 50 m
glass thickness 8 mm
617 254.0000.000 transp. 1 m
617 254.0000.090 black 1 m
glass thickness 10 mm
617 255.0000.000 transp. 1 m
617 255.0000.090 black 1 m
glass thickness 12 mm
617 256.0000.000 transp. 1 m
617 256.0000.090 black 1 m
You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).
Figure Product description Profile length Product number Execution Unit List price
21 3
track fixed to ceiling/Side-light
2 sashes
32
Your project measurements (mm)Height of door aperture = LH =
Calculation of glass height (mm)H1 = LH + 28 =
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 x Glass thickness (without film)x 2,5 =
Examination of possible cushioning options
• With a sash weight of up to 80 kg, there is a choice of cushioning on one end, cushioning on both ends and no cushioning.
• Cushioning is not possible with a sash weight of 81-120 kg
Number of possible cushioning systems as set out table
Determination of measurements: installation in glass facade, 1 sash, clear width 1000
Maximum number of cushioning systems for your Portavant system
Complete sets are also available for clear width = 1200 (see p. 36).
Please allow us to advise you for different installation situations with installation in glass facade.
LW = Clear width
LH = Clear height
LWt = Clear width when door open
A = Glass width of sash
BO = Transom light width
Calculation of glass width and profile length
Calculation of glass width and profile length
2 31
PortavantGlass fittings with logic
Installation in glass facade
1 sash
33
Complete sets: installation in glass facade, 1 sash, clear width 1000, “straight cover profile”
Complete set, 1 sash 2074 mm 617 019.2074.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
clear width 1000 mm
includes:
1x track profile installation in glass
facade
1x straight cover profile
1x profile for glass facade
1x accessory kit II „glass facade“
Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).
Complete set, 1 sash 2074 mm 617 119.2074.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm
includes:
1x track profile installation in glass
facade
1x straight cover profile
1x profile for glass facade
1x accessory kit II „glass facade“
1x complementary accessory kit A
Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39): recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).
Complete set, 1 sash 2074 mm 617 219.2074.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm
includes:
1x track profile installation in glass
facade
1x straight cover profile
1x profile for glass facade
1x accessory kit I „glass facade“
Note: suitable for sash weight up to 120 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
Installation in glass facade
1 sash
1x per sash
2x per sash
Without
34
Complete sets: installation in glass facade, 1 sash, clear width 1000, “rounded cover profile”
Complete set, 1 sash 2074 mm 617 017.2074.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
clear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“
Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).
Complete set, 1 sash 2074 mm 617 117.2074.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A
Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).
Complete set, 1 sash 2074 mm 617 217.2074.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit I „glass facade“
Note: suitable for sash weight up to 120 kg, sash width 1070 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
Installation in glass facade
1 sash
1x per sash
2x per sash
Without
35
Your project measurements (mm)Height of door aperture = LH =
Calculaion of glass height (mm)H1 = LH + 28 =
Your project measurements (mm)
Glass thickness =
Calculation of sash weight (kg)Sash weight =A/1000 x H1/1000 x Glass thickness (without film)x 2,5 =
Examination of possible cushioning options
• With a sash weight of up to 80 kg, there is a choice of cushioning on one end, cushioning on both ends and no cushioning.
• Cushioning is not possible with a sash weight of 81-120 kg
Number of possible cushioning systems as set out table
Maximum number of cushioning systems for your Portavant system
Complete sets are also available for clear width = 1000 (see p. 33).
Please allow us to advise you for different installation situations with installation in glass facade.
Calculation of glass width and profile length
Calculation of glass width and profile length
LW = Clear width
LH = Clear height
LWt = Clear width when door open
A = Glass width of sash
BO = Transom light width
Determination of measurements: installation in glass facade, 1 sash, clear width 1200
2 31
Installation in glass facade
1 sash
36
Complete sets: installation in glass facade, 1 sash, clear width 1200, “straight cover profile”
Complete set, 1 sash 2474 mm 617 019.2474.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
clear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit II „glass facade“
Note: only suitable for sash weight up to 80 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).
Complete set, 1 sash 2474 mm 617 119.2474.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A
Note: only suitable for sash weight up to 80 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).
Complete set, 1 sash 2474 mm 617 219.2474.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit I „glass facade“
Note: suitable for sash weight up to 120 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40)
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
Installation in glass facade
1 sash
1x per sash
2x per sash
Without
37
Installation in glass facade, 1 sash, clear width 1200, “rounded cover profile”
Complete set, 1 sash 2474 mm 617 017.2474.110 EV 1 1 unit1x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unit
clear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“
Note: only suitable for sash weight up to 80 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).
Complete set, 1 sash 2474 mm 617 117.2474.110 EV 1 1 unit2x CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A
Note: only suitable for sash weight up to 80 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommenda-tion: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).
Complete set, 1 sash 2474 mm 617 217.2474.110 EV 1 1 unitwithout CoMFoRt StoP + aUto CLoSE .120 C 31 1 unitclear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit I „glass facade“
Note: suitable for sash weight up to 120 kg, sash width 1270 mm. other profiles: floor-wall-profile, ceiling profile (see p. 39). recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40); „rounded cover profile for rear side“ (see p. 40).
Cover design number of sashesnumber of cushioning systems Product description Profile length Product number Execution Unit List price
21 3
Installation in glass facade
1 sash
1x per sash
2x per sash
Without
38
Accessories
Do you wish to frame the glass facade of your system with a floor-wall-profile?
Floor-wall-profile (U-profile) 1996 mm 617 520.1996.110 EV 1 1 unitfixed side-light, profile height 16 mm .120 C 31 1 unit
2996 mm 617 520.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 520.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 520.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 520.length.110 EV 1 per m cut to size1)
.120 C 31 per m cut to size1)
recommendation: silicone gasket (see p. 41); end plate (see p. 40).
Do you wish to attach the fixed glass sashes of your system with a ceiling profile?
Ceiling profile (U-profile) 1996 mm 617 530.1996.110 EV 1 1 unitfixed side-light, profile height 35 mm .120 C 31 1 unit
2996 mm 617 530.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 530.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 530.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 530.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 41); end plate (see p. 40).
Figure Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
Installation in glass facade
1 sash
39
Accessories
are you using the „rounded cover profile“ on the front side of your sys-tem and do you want to produce the curved look on the rear side as well?
Rounded cover profile for rear side 2074 mm 617 500.2074.110 EV 1 1 unittrack fixed to wall .120 C 31 1 unit
2474 mm 617 500.2474.110 EV 1 1 unit
.120 C 31 1 unit
Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). end plates for rear cover profile are not included in the accessory kits (see p. 40).
are you using the profile for glass facade and do you want to add end plates?
End plate for profile for glass facadewith rounded cover profile for rear side
617 265.0000.020 stainless steel
1 unit
Note: end plates for straight cover profiles or rounded cover profiles for fixed side-light with straight look on the rear side are included in the accessory kits.
are you using the floor-wall-profile and do you want to add end plates?
End plate for floor-wall-profileleft or right hand use
617 257.0000.020 stainless steel
1 unit
are you using the ceiling profile and do you want to add end plates?
End plate for ceiling profileleft or right hand use
617 263.0000.020 stainless steel
1 unit
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
Figure Product description Profile length Product number Execution Unit List price
21 3
Installation in glass facade
1 sash
40
Accessories
Do you wish to attach the side-lights or other fixed glass sashes in the cover profile, the floor-wall-profile or the ceiling profile with a silicone gasket?
Silicone gasket for fixed side-lightpacking unit = 50 m
glass thickness 8 mm
617 254.0000.000 transp. 1 m
617 254.0000.090 black 1 m
glass thickness 10 mm
617 255.0000.000 transp. 1 m
617 255.0000.090 black 1 m
glass thickness 12 mm
617 256.0000.000 transp. 1 m
617 256.0000.090 black 1 m
You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).
Figure Product description Profile length Product number Execution Unit List price
21 3
PortavantGlass fittings with logic
Installation in glass facade
1 sash
41
Installation in glass facade
1 sash
Choose the single components from our range.
PortavantGlass fittings with logic
Single componentsProfiles
Single components: profiles
track profile 1996 mm 617 015.1996.110 EV 1 1 unittrack fixed to wall .120 C 31 1 unit
2996 mm 617 015.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 015.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 015.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 015.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58).
track profile 1996 mm 617 025.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit
2996 mm 617 025.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 025.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 025.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 025.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58).
Figure Product description Profile length Product number Execution Unit List price
Single componentsProfiles
44
Single components: profiles
Straight cover profile 1996 mm 617 055.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit
2996 mm 617 055.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 055.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 055.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 055.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58).
Rounded cover profile 1996 mm 617 035.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit
2996 mm 617 035.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 035.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 035.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 055.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58); „rounded cover profile for rear side“ (see p. 49).
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsProfiles
45
Single components: profiles
Straight cover profile for fixed side-light 1996 mm 617 065.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit
2996 mm 617 065.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 065.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 065.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 065.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58).
Rounded cover profile for fixed side-light 1996 mm 617 045.1996.110 EV 1 1 unittrack fixed to ceiling or track fixed to wall .120 C 31 1 unit
2996 mm 617 045.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 045.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 045.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 045.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: hair-bristle lining (see p. 58); „rounded cover profile for rear side“ (see p. 49).
Figure Product description Profile length Product number Execution Unit List price
Single componentsProfiles
46
Single components: profiles
Rear profile for glass facade 4960 mm 617 005.4960.110 EV 1 1 unitfor attaching the track to a glass facade .120 C 31 1 unit
cut to size in mm 617 005.length.110 EV 1 per m cut to size
.120 C 31 per m cut to size
other required system components: track profile for wall mounting (see p. 44); „straight cover profile“ respectively „rounded cover profile“ (see p. 45); accessory kit I „glass facade“ without ComforT SToP + AUTo CLoSE respectively accessory kit II „glass facade“ with ComforT SToP + AUTo CLoSE (see p. 55/56); if applicable complementary accessory kit „glass facade“ (see p. 57); if applicable floor-wall-profile, ceiling profile (see p. 47/48). recommendation: „rounded cover profile for rear side“ (see p. 49); end plates for profile for glass facade with „rounded cover profile“ on rear (see p. 58). Note: end plates for the installation in glass facade with straight design on the rear side are included in the accessory kits.
Floor-wall-profile (U-profile) 1996 mm 617 520.1996.110 EV 1 1 unitfixed side-light, profile height 16 mm .120 C 31 1 unit
for attaching your fixed sash to the floor
and the wall2996 mm 617 520.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 520.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 520.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 520.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 59), end plate for floor-wall-profile (see p. 58).
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsProfiles
47
Single components: profiles
Ceiling profile (U-profile) 1996 mm 617 530.1996.110 EV 1 1 unitfixed side-light, profile height 35 mm .120 C 31 1 unit
for attaching your fixed sash to the
ceiling2996 mm 617 530.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 530.3996.110 EV 1 1 unit
.120 C 31 1 unit
5996 mm 617 530.5996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 530.length.110 EV 1 per m cut to size
.120 C 31 per m cut to sizerecommendation: silicone gasket (see p. 59), end plate for floor-wall-profile (see p. 58).
Cover profile 1996 mm 617 540.1996.110 EV 1 1 unitfixed side-light .120 C 31 1 unit
for covering the open slot in the cover for
fixed side-lights in the door opening2996 mm 617 540.2996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 540.length.110 EV 1 per m cut to size
.120 C 31 per m cut to size
Note: for clip-on on cover profiles for fixed side-light.
Figure Product description Profile length Product number Execution Unit List price
Single componentsProfiles
48
Single components: profiles
Rounded cover profile for rear side 1996 mm 617 500.1996.110 EV 1 1 unittrack fixed to ceiling .120 C 31 1 unit
for producing a curved look also on the
rear side of your system 2996 mm 617 500.2996.110 EV 1 1 unit
.120 C 31 1 unit
3996 mm 617 500.3996.110 EV 1 1 unit
.120 C 31 1 unit
cut to size in mm 617 500.length.110 EV 1 per m cut to size
.120 C 31 per m cut to size
Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). end plates for rear cover profile are not included in the accessory kits (see p. 58).
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsProfiles
49
Single componentsProfiles
Single components: accessories
are you installing the „straight cover profile“ and do you require an acces-sory kit for doors up to 120 kg sash weight without CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 55.
accessory kit I „straight cover profile“ 617 205.0000.000 1 unit2x end stop mechanism for holding in
end position
for sash weight up to 120 kg
includes:
2x clamp-carriers with height ad-
justment, safety catch and anti-tilt-
protection
4x safety studs for special applications
1x set elastomeric clamping inserts
from 8 mm tempered glass till 12,76
mm laminated glass
1x floor guide from 8 mm till 12,76 mm
glass thickness
2x end stops with 2 rubber cushions
each
2x return stops for holding the door in
the final position
2x end plates (stainless steel) for
„straight cover profile + track profile“
2x end plates (stainless steel) for
„straight cover profile of side-light +
track profile“
Note: 1x per door sash required. Suitable for sash weight up to 120 kg. Note: glass facade installation requires accessory kit I „glass facade“ (see p. 55).
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsaccessories
51
Single components: accessories
are you installing the „rounded cover profile“ and do you require an acces-sory kit for doors up to 120 kg sash weight without CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 55.
accessory kit I „rounded cover profile“ 617 200.0000.000 1 unit2x end stop mechanism for holding in
end position
for sash weight up to 120 kg
includes:
2x clamp-carriers with height ad-
justment, safety catch and anti-tilt-
protection
4x safety studs for special applications
1x set elastomeric clamping inserts
from 8 mm tempered glass till 12,76
mm laminated glass
1x floor guide from 8 mm till 12,76 mm
glass thickness
2x end stops with 2 rubber cushions
each
2x return stops for holding the door in
the final position
2x end plates (stainless steel) for
„rounded cover profile + track profile“
2x end plates (stainless steel) for
„rounded cover profile of side-light +
track profile“
Note: 1x per door sash required. Suitable for sash weight up to 120 kg. Note: glass facade installation requires accessory kit I „glass facade“ (see p. 55).
Figure Product description Profile length Product number Execution Unit List price
ZubehörSingle components
accessories
52
Single components: accessories
are you installing the „straight cover profile“ and do you require an accessory set for doors up to 80 kg sash weight with CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 56.
accessory kit II „straight cover profile“ 617 225.0000.000 1 unit1x CoMFoRt StoP + aUto CLoSE
1x end stop mechanism for holding in end position
for sash weight up to 80 kg
includes:
2x clamp-carriers with height ad-
justment, safety catch and anti-tilt-
protection
4x safety studs for special applications
1x set elastomeric clamping inserts
from 8 mm tempered glass till 12,76
mm laminated glass
1x floor guide from 8 mm till 12,76 mm
glass thickness
2x end stops with 2 rubber cushions
each
1x return stop for holding the door in
the final position
1x cushioning and self-closing system
ComforT SToP + AUTo CLoSE with
patented working mechanism and
fixing adapter
2x end plates (stainless steel) for
„straight cover profile + track profile“
2x end plates (stainless steel) for
„straight cover profile profile of side-
light + track profile“
Note: 1x per door sash required. only suitable for sash weight up to 80 kg. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted. Note: glass facade installation requires accessory kit II „glass facade“ (see p. 56).
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsaccessories
53
Single components: accessories
are you installing the „rounded cover profile“ and do you require an accessory set for doors up to 80 kg sash weight with CoMFoRt StoP and aUto CLoSE? this accessory kit is suitable for all Portavant installations except glass facades. the corresponding accesso-ry kit for glass facades can be found on p. 56.
accessory kit II „rounded cover profile“ 617 220.0000.000 1 unit1x CoMFoRt StoP + aUto CLoSE
1x end stop mechanism for holding in end position
for sash weight up to 80 kg
includes:
2x clamp-carriers with height ad-
justment, safety catch and anti-tilt-
protection
4x safety studs for special applications
1x set elastomeric clamping inserts
from 8 mm tempered glass till 12,76
mm laminated glass
1x floor guide from 8 mm till 12,76 mm
glass thickness
2x end stops with 2 rubber cushions
each
1x return stop for holding the door in
the final position
1x cushioning and self-closing system
ComforT SToP + AUTo CLoSE with
patented working mechanism and
fixing adapter
2x end plates (stainless steel) for
„rounded cover profile + track profile“
2x end plates (stainless steel) for
„rounded cover profile of side-light +
track profile“
Note: 1x per door sash required. only suitable for sash weight up to 80 kg. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted. Note: glass facade installation requires accessory kit II „glass facade“ (see p. 56).
Figure Product description Profile length Product number Execution Unit List price
Single componentsaccessories
54
Single components: accessories
Do you use Portavant for the ins-tallation in glass facade and do you require an accessory kit for doors up to 120 kg sash weight without CoMFoRt StoP und aUto CLoSE?
accessory kit I „glass facade“ 617 207.0000.000 1 unitfor „straight & rounded cover profile“
2x end stop mechanism for holding in end position
includes:
2x clamp-carriers with height ad-
justment, safety catch and anti-tilt-
protection
4x safety studs for special applications
1x set elastomeric clamping inserts
from 8 mm tempered glass till 12,76
mm laminated glass
1x floor guide from 8 mm till 12,76 mm
glass thickness
2x end stops with 2 rubber cushions
each
2x return stop for holding the door in
the final position
2x end plates (stainless steel) for
„straight cover profile + track profile“
2x end plates (stainless steel) for
„rounded cover profile + track profile“
2x end plates (stainless steel) for profile
for glass facade
1x set of fixing materials for glass
facade with 14 drill holes (incl. shims,
screws and sealing compound)
Note: 1x per door sash required. Suitable for sash weight up to 120 kg.
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsaccessories
55
Single components: accessories
Do you use Portavant for the ins-tallation in glass facade and do you require an accessory kit for doors up to 80 kg sash weight with CoMFoRt StoP und aUto CLoSE?
accessory kit II „glass facade“ 617 227.0000.000 1 unitfor „straight & rounded cover profile“
1x CoMFoRt StoP + aUto CLoSE 1x end stop mechanism for holding in end position includes: 2x clamp-carriers with height ad-justment, safety catch and anti-tilt-protection 4x safety studs for special applications 1x set elastomeric clamping inserts from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm glass thickness 2x end stops with 2 rubber cushions each 1x return stop for holding the door in the final position 1x cushioning and self-closing system ComforT SToP + AUTo CLoSE with patented working mechanism and fixing adapter 2x end plates (stainless steel) for „straight cover profile + track profile“ 2x end plates (stainless steel) for „rounded cover profile + track profile“ 2x end plates (stainless steel) for profile for glass facade 1x set of fixing materials for glass facade with 14 drill holes (incl. shims, screws and sealing compound)
Note: 1x per door sash required. only suitable for sash weight up to 80 kg. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted.
Figure Product description Profile length Product number Execution Unit List price
Single componentsaccessories
56
Single components: accessories
Do you wish to equip your system with additional cushioning systems for up to 80 kg sash weight?
Complementary accessory kit a 617 230.0000.000 1 unit1x retrofit ComforT SToP + AUToCLoSE for sash weight up to 80 kg Note: only suitable for sash weight up to 80 kg. Also required for cushioning on both sides.
The complementory accessory kit A can be combined with accessory kit I and accessory kit II. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted.
Do you with to equip your system with cushioning systems for up to 40 kg sash weight?
Complementary accessory kit B 617 233.0000.000 1 unit1x retrofit ComforT SToP+ AUToCLoSE for sash weight up to 40 kg Note: only suitable for sash weight up to 40 kg.
The complementory accessory kit B can be combined with accessory kit I. ComforT SToP + AUTo CLoSE can be used on one side from 720 mm sash width onwards. ComforT SToP + AUTo CLoSE can be used on both sides from 1050 mm sash width onwards. ComforT SToP + AUTo CLoSE can be retrofitted.
are you looking for a Portavant with synchronously opening system in which both sashes can be opened simultanously by hand?
Complementary accessory kit C 617 210.0000.000 1 unitfor 2-sash synchronously openingsystem, in connection with 2x accessory kit I, for sash weight up to 80 kg
Note: the synchronised fitting is only suitable for a door sash weight of up to 80 kg each. The synchronised fitting is only suitable for wall and ceiling mounting without side-lights. The kit for synchronously opening doors cannot be combined with ComforT SToP + AUTo CLoSE.
Do you require additional accessories to the components included in the accessory kits I and II „glass facade“ for glass facade installation?
Complementary accessory kit „glass 617 237.0000.000 1 unitfacade“
contains: 1x set of fixing materials for glass facade with 14 drill holes (incl. shims, screws and sealing compound)
Do you wish to install a timber sliding door instead of a glass sliding door and do you require an adapter for applying Portavant?
Complementary accessories kit „timber 617 235.0000.000 1 unitsliding door“
contains: 1x set of fixing materials for timber sliding door (incl. screws) 2x roller assembly adapter sheet for timber sliding door 2x safety catch for timber sliding door 1x floor guide for timber sliding door
Note: Please allow us to advise you with regard to size and application. Note: The complementary accessory kit „timber sliding door“ can be combined with accessory kits I and II. ComforT SToP + AUTo CLoSE can be used on a single side from sash width 720 mm. ComforT SToP + AUTo CLoSE can be used on both sides from sash width 1050 mm. ComforT SToP + AUTo CLoSE can also be retrofitted.
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsaccessories
57
Single components: accessories
are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates?
End plate for „rounded cover profile & rounded cover profile for rear side“
617 250.0000.020 stainless steel
1 unit
track fixed to ceiling left or right hand use Note: end plates for „straight cover profile“ and „rounded cover profile“ with straight design on the rear side are included in the complemen-
tory accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.
are you installing the rear „rounded cover profile“ in your system with side-light and do you want to equip it with end plates?
End plate for „rounded cover profile with fixed side-light & rounded cover
617 251.0000.020 stainless steel
1 unit
profile for rear side“ track fixed to ceiling left or right hand use
Note: end plates for „straight cover profile“ and „rounded cover profile“ for fixed side-light with straight design on the rear side are included in the complementory accessory kits. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.
are you using the floor-wall-profile and do you want to add end plates?
End plate for floor-wall-profileleft or right hand use
617 257.0000.020 stainless steel
1 unit
are you using the ceiling profile and do you want to add end plates?
End plate for ceiling profileleft or right hand use
617 263.0000.020 stainless steel
1 unit
are you installing the „rounded cover profile“ on the front and rear side of your glass facade installation system and do you want to use end plates?
End plate for profile for glass facade with „rounded cover profile“ on rear
617 265.0000.020 stainless steel
1 unit
Note: end plates for „straight cover profile“ and „rounded cover profile“ for the installation in glass facade with straight design on the rear side are included in the complementory accessory kits.
Do you want to add a hair-bristle lining to your system?
Hair-bristle lining 617 253.0000.315 1 mfor cover profiles and track profiles
packing unit = 20 m
Figure Product description Profile length Product number Execution Unit List price
Single componentsaccessories
58
Single components: accessories
Do you wish to attach the side-lights or other fixed glass sashes in the cover profile, the floor-wall profile or the ceiling profile with a silicone gasket?
Silicone gasket for side-lightpacking unit = 50 m
glass thickness 8 mm
617 254.0000.000 transp. 1 m
617 254.0000.090 black 1 m
glass thickness 10 mm
617 255.0000.000 transp. 1 m
617 255.0000.090 black 1 m
glass thickness 12 mm
617 256.0000.000 transp. 1 m
617 256.0000.090 black 1 m
Do you require additional floor gui-des to the one included in the acces-sory kit?
Replacement floor guide 617 264.0000.000 EV 1 1 unitglass thickness 8 to 12,76 mm
incl. inserts Note: one floor guide is available in the complete sets and accessory kits.
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Single componentsaccessories
59
Photographic print with kind authorization of the Dorint Resort An den Thermen Freiburg (Germany)
Single componentsaccessories
Choose the pull handles from our range.
PortavantGlass fittings with logic
Handles
Handles
Finger pull handle (enclosed)diameter 64 mm
617 266.0000.020 stainless steel
1 pair
self-adhesive, no drill holes in glass
suitable for any glass thickness
weight: 0,4 kg
Note: no glass drilling required
assembly jig 617 290.0000.000 1 unitfor self-adhesive finger pull handle
(Art. No. 617 266.0000.020)
for safe positioning on the sliding door,
both sides and congruent
Finger pull handle (enclosed) 617 267.0000.110 EV 1 1 pairdiameter 65 mm 617 267.0000.120 C 31 1 pair
for 50 mm diameter drill hole
glass thickness 8 to 10 mm
weight: 0.4 kg
617 267.0000.020 stainless steel
1 pair
Note: colour EV 1 suitable for profiles in EV 1; colour C31 suitable for profiles in C31.
Figure Product description Profile length Product number Execution Unit List price
HandlesHandles
62
Handles
Pull handle 617 268.0000.110 EV 1 1 pairhandle length 400 mm
distance between drill holes 200 mm617 268.0000.020 stainless
steel1 pair
handle diameter 25 mm
drill hole diameter 16 mm
glass thickness 8 to 12,76 mm
weight: 1,5 kg
Note: colour EV 1 suitable for profiles in EV 1.
Pull handle 617 269.0000.110 EV 1 1 pairhandle length 700 mm
distance between drill holes 500 mm617 269.0000.020 stainless
steel1 pair
handle diameter 25 mm
drill hole diameter 16 mm
glass thickness 8 to 12,76 mm
weight: 2,1 kg
Note: colour EV 1 suitable for profiles in EV 1.
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Handles
63
HandlesHandles
Packaging
Do you require profile packing mate-rial to pack the profiles cut by your own?
optional profile packing material
profile cardboard packing
in endless ondulated cardboard
packing unit = 50 m
top for cardboard packing (2 units per
profile cardboard packing are necessary)
packing unit = 50 units
PE-spacer (1 piece per 0,5 m profile + 1
piece per cardboard box are necessary)
packing unit = 50 units
VWDV.0003 1 m
VWDV.0002 1 unit
VXDV.0001 1 unit
Do you require packaging samples for your customer?
Packaging sample with 150 mm profiles
rounded cover profile 617 600.0000.110 EV 1 1 unit
straight cover profile
617 600.0000.120 C 31 1 unit
617 601.0000.110 EV 1 1 unit
617 601.0000.120 C 31 1 unit
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
Packaging
65
Tools
Do you require a torque driver for the professional mounting of end stops?
torque driver 3 nm (without bit) 617 260.0000.000 1 unitfor the professional mounting of the end
stops
Blade for 3 nm
(not suitable for torque driver 12 Nm)
617 259.0000.000 1 unit
Do you require a torque driver for the professional mounting of clamp-carriers?
torque driver 12 nm (without bit) 617 261.0000.000 1 unitfor the professional mounting of clamp-carriers
Blade for 12 nm
(not suitable for torque driver 3 Nm)
617 258.0000.000 1 unit
Figure Product description Profile length Product number Execution Unit List price
PortavantGlass fittings with logic
tools
67
for your notes 68
for your notes
PortavantGlass fittings with logic
69
The companyWillach belongs to the leading producers of glass fittings in Europe. Since its establishment in 1889, the manufacture of products to the highest quality and precision standards has been the supreme dictum of the company. Numerous technical innovations and intelligent solutions with regard to detail meant that Willach was able to cement its pioneering reputation at an early stage. With the Vitris product line, Willach today offers a range of high quality fittings for glass sliding doors. furthermore the product range comprises a comprehensive modular system of showcase fittings, sliding door locks and slot bar systems for discerning interior, shop and trade show furnishings. Vitris products are certified in accordance with ISo standards and are manufactured at our ruppichteroth (Germany) production site to meet stringent manufacturing standards. This forms the basis for the excellent quality and consistently high level of availability of the complete Vitris range.
Contact us and let us advise you!
Gebr. Willach GmbHStein 2D-53809 ruppichterothGermanyTel.: +49 (0)2295 92 08 -421/-422fax: +49 (0)2295 92 08 [email protected]
flyers, brochures and drawings are merely product descriptions and represent neither assured properties nor statements of guarantee.
Stamp
Utilise all the benefits
CoMFoRt StoP The cushioning system for your safety. ComforT SToP slows the glass door effectively, gently and quietly irrespec-tive of its weight and speed of closure, and does so over a distance of several centi-metres.
EXaCt tRIGGER The triggering mechanism for reliable functioning. Its revolutionary design principle (patent pending) ensures that the cushioning system is always reliably functioning.
SYStEM FIt The modular solution for your installation situation. makes almost any installation possible with modular system components in a variety of combinations.
aUto CLoSE The self-closing system to make you feel good. AUTo CLoSE fully closes the glass door effectively, gently and quietly once it has been slowed by the inno-vative cushioning system
EaSY InStaLL The solution for ease of assembly without having to cut glass. Turns the installation of glass sliding doors into child’s play.
DESIGn SELECt Perfection and diversity for your design highlights. Enables stylistic highlights with beautifully shaped, sophis-ticated cover profiles in a curved or straight design and the appropriate, innovative handles in your preferred colour.
COMFORTSTOP AUTOCLOSE
DESIGN SELECT