14
PORTFOLIO 2016
Pablo Gómez Alabau
CONCEPT: Mulple Funcon Table Lamp. A single device to create different atmospheresDesigned to provide, upon request and with a single gesture, a warm, so ambient light, a bright room light or a direconal reading light. It also allows different combinaons
DEVELOPMENT: Meant to be manufactured in various types of plasc material with different visual sensaons. Stages: Concept, sketch, 3D design and planimetriy.
LUMINARY DESIGNUNIVERSITY PROJECT
WATERTIGHT BATTERY PACK DESIGNFOR: BUNKER SEGURIDAD
CONCEPT: Waterght box (IP65), designed to house a radio transmier and a baery pack. Suitable for diffe-rent supports like IR columns, poles or outdoor wall mounng.
DEVELOPMENT: In cooperaon with the electronic department, developing simultaneously the PCB and the whaterght box. Designed to be easily handeled by the installer even in dificult places. Reduced dimensions for tower fing. Stages: Concept creaon, sketching, measurement process, 3D design (Caa), Prototype in resin, design review and preparaon for manufacturing, mould developing (externalized), manufactured in ABS.
CONCEPT: Mulmedia device. Designed to reaplace diverse mulmedia equipment as a HI-Fi music players, home cinema, DVD player, etc. It has an extractable core, (see UMPC design) that can manage the media and be used both as a remote control and a fully funconal autonomous UMPC.
DEVELOPMENT: Concept creaon and sketching oriented to its funconality. Inner basic dimensions derived from real hardware. Sound and speakers study, for the design of the acousc box of the sound system.Mulple mechanisms design for the interacon between diferent components. Desinged in Solidworks, rende-ring in Photowork360º and Photoshop.
MEDIA CENTER DESIGNUNIVERSITY PROJECT
UMPC DESIGNINDUSTRIAL DESIGN ENGINEERING FINAL YEAR PROJECT
CONCEPT: Ultra movile PC, designed for mulple funcons.
DEVELOPMENT: Concept creaon and sketching oriented to its funconality. Inner basic dimensions derived from real hardware. Design of several mechanisms, to modify its shape to be used for gaming, mulmedia playback, office work, and sketch and drawing. Ergonomic study made for a perfect adaptaon to its use.Desinged in Solidworks, rendering in Photowork360º and Photoshop
CONCEPT: Project for “Hipotesis Urbana”, a huge plan for the remodeling of M-3o orbital motorway in Madrid, Spain. This project was conceved to combine urban furniture and social concerns.
DEVELOPMENT: Ment to be manufactured in a material suitable for all weather condions.
PICKNICK TABLE/HOMELESS SHELTER UNIVERSITY PROJECT
1. Standard table configurationt 2. Benches slide to their final position
3. Bench backs move to form a bed and a drawer
4.Table top comes down on the sides
5. The third plate goes down to form last walls
CONCEPT: Enrely designed with straight lines. Thought to preserve the essence of the original bole shape. Updated graphic design and label. The final product mixes tradion and trendiness.
JACK DANIELS BOTTLE RESTYLINGUNIVERSITY PROJECT
CONCEPT: Engine design for a chainsaw
DEVELOPMENT: Diferent engine types study. Mechanical design and calculaons for the engine body. Design of intake and exhaust port. Thermic study, convecon fins calculaon. Volumetric and mixture calculaon. Design and mechanical calculaon for the remaining parts in the assembly.
TWO STROKE ENGINE DESIGNINDUSTRIAL ENGINEERING FINAL YEAR PROJECT
FIXING PLATES FOR IR TOWERS FOR: BUNKER SEGURIDAD
CONCEPT: Fixing system for IR tower in marine environments.
DEVELOPMENT: Mecanichal and environmental study, designed in generave sheetmetal module in Caa. Research on materials suitable to be used in port areas
FIXING SYSTEM FOR MULTIPLE USES AND SURFACESFOR: BUNKER SEGURIDAD
CONCEPT: ABS plasc bracket.
DEVELOPMENT: Conceived to unify all fixing devices produced by the company, in order to cut manufacturing costs by reducing the number of different injecon moulds. This will allow to increase the amount of pieces or-dered of a standardized piece, reducing the price per part. It was a great work in the areas of space manage-ment, measures, organizaon and design.
CONCEPT: Whaterght box (IP65), designed to house microwave sensor. Suitable for diferent supports like co-lumns, poles or outdoor wall mounng.
DEVELOPMENT: Designed to be easily handeled by the installer even in dificult places. Reduced dimensions for tower fing. Mechanism designed for the orientaon of the sensor (180º horizontal, 35º vercal) Concept creaon, sketching, measurement process, 3D design (Caa), manufactured in ABS.
MICROWAVE WATERTIGHT SECURITY BEAM HOUSING DESIGN
BUNKER SEGURIDAD
Pablo Gómez AlabauNAME SURNAME
DATE OF BIRTH
PHONE NUMBER
NATIONALITY
12/06/1987ADDRESS
C/ Petunias Nº21 CP:28042Madrid Spain
Tlf: +34 609 86 10 08
Spanish
2015Master CATIA V5 R21+ Act. V6 (120h), Industrial and product design.-Master funded by the company Bunkers security s.l.Complete vision of the different modules conforming the program and its applicaon in the area of design, allowing a producve use of the tool. Also the upgrade to V6, where an ad-vanced use of the tool is provided, and working in digital mockup.
2010-20132010-2013Industrial engineering. ETSI Alfonso X el Sabio.-Final year proyect:"Redesign of the two-stroke engine for a chainsaw." (2013)Deep knowledge of mechanics, materials technology and manufacturing, chemistry, ther-modynamics and energy, electricity and electronics. Use of compung tools. Ability to analyze and synthesize that allows me to reach the cause of problems and disnguish the essenal from the accessory, providing soluons in an organized and effecve way.
WORK EXPERIENCE
EDUCATION AND TRAINING
2014-NOWProduct development and creave deparment.Bunker seguridad electronica S.A.Perimetral securityInIn charge of the whole product generaon process, from concept generaon and product design, to preparaon for manufacturing. Responsible for technical office including purcha-se department support. Responsible for creave department and graphic design.
2011-NOW Freelance graphic designer.Self employedVariousBBranding and corporate identy design; corporate identy manuals, adversing, logo, label design, and others, for mulple organizaons and private costumers such as food compa-nies, gyms or events management companies.
2006Establishment managerHäagen-DazsCoffe shop.Establishment shopman, stock control, waiter, cashier.
DATEOCCUPATIONEMPLOYER
SECTOR OF BUSSINESMAIN RESPONSABILITIES
DATEOCCUPATIONEMPLOYER
SECTOR OF BUSSINESMAIN RESPONSABILITIES
DATEOCCUPATIONEMPLOYER
SECTOR OF BUSSINESMAIN RESPONSABILITIES
“First Cerficate in english” by Cambridge University.Preparaon courses for “Advanced Cerficate in english” Cambridge Exam.English intensive summer course, 2002, 2003 and 2004 in Southborne school of english in Bournemouth, England.“A2 Cerficaon in German” by Tandem internaonal School.
2012Parcipaon in the Erasmus program in Ostrava, Czech Republic
2013-2014Pencil drawing and ilustraon class , at La Mina art school.
Spanish
As responsible for design and technical office, I had to coordinate work groups (3, 4 people) from different departments, from purchase to assembly line during the creaon and implementaon of new products.In addion during the musical producon and performance years I had the opportunity to organize many of the events in which my band took part .
During my me at Bunkers Seguridad, I have worked in small teams in va-rious projects. I have also good skills dealing with final client, and at ad-dressing large groups of persons due to my experience as vocalist of musi-cal formaons.
2009-2010Graphic design course and adversing producon. Cice (Madrid).DesignDesign basic principles. Usage of graphic language as a concepon and transmission of ideas. Illustraon techniques. Image digital processing. Deep knowledge of pre-prinng and the different pre and final prinng systems. Layout and graphic pro-ject planning, knowing the technical and aesthecal foundaons present in any pro-fesional project.
2006-2010Technical Engineering in Industrial Design. ETSI Alfonso X el Sabio-Final year proyect:”Design of a domesc media center with removable operave personal core ” (2010)Training in funconal aspects related to use and operaon; formal aspects, related to aesthecs; construcve, related to manufacturing; logiscs related to distribuon and rerement. design of products that combines technology with aesthec, economy and funconality, among other aspects.
PERSONAL SKILLS
MOTHER TONGUE
OTHER LANGUAGES
COMUNICATION SKILLS
ORGANISATIONAL / MANAGERIAL SKILLS
EDUCATION AND TRAINING
JOB RELATED SKILS
DIGITAL COMPETENCE
OTHER SKILLS
DRIVING LICENCE
Ease of treatment, cordiality and great capacity to learn and adapt myself to new work environments.Highly qualified for work with and learning new soware.Creave and resoluve personality.Specific training and opmal for the mechanical and product design.
Expert in CATIA V5, focused on design.Expert in Adobes creave suite, Phtoshop Illustrator Indesgn.Advanced at SolidWorks, (Design).Advanced at Autocad.Good at Microso Office.Knowlage at programming, java, Html.AlsoAlso University aproach to, Matlab and simulink, MathCad, Ansys, Paclet tracer, and witness.
As a final point in this area, I want to highlight that I am curious person with enthusiasm in learning. As an illustrave example, speaking of technical areas like, car mechanics, I am involved in a personal project, the restora-on of a XJ 1992 Jaguar
Lead vocalist at mulple musical formaons since 2004. (3 EP published.)
B
