Date post: | 20-Jan-2016 |
Category: |
Documents |
Upload: | bathsheba-booker |
View: | 214 times |
Download: | 0 times |
portfolio
michael wybenga
portfolio :: michael wybenga 2
swimming micro-robot
_ early design (artists conception)
portfolio :: michael wybenga 3
swimming micro-robot | cont.
_ scaled prototype to test feasibility of flexible filament.
_ compliant mechanism design balancing applied inertial forces, drag forces, and body stiffness
_more information at
real.uwaterloo.ca/~wybenga
(under research section)
portfolio :: michael wybenga 4
swimming micro-robot | cont.
_ flexible filament made by using four piece mold built using 3D rapid prototyping (two pieces removed for clarity)
_ four pieces used to allow for mold release
_ room temperature, atmospheric pressure mold
portfolio :: michael wybenga 5
snowmobile engine head
_ new three piece cylinder head design to allow for high pressure fuel injection directly into cylinder of two stroke snowmobile engine
_ parts in grey, green, and yellow custom designed
_ parts in purple are purchased
_ hardware omitted for clarity
portfolio :: michael wybenga 6
snowmobile engine head | cont.
_ cut away with parts removed to show complexity of cylinder base.
_ parts designed to be manufactured with 3-axis CNC mill and CNC lathe
_ click for e-drawing
portfolio :: michael wybenga 7
snowmobile engine head | cont.
_ drawing of cylinder dome showing pertinent tolerances
portfolio :: michael wybenga 8
SMA power door lock toggle
_ novel power door lock actuator using shape memory alloys.
_ prototype design to facilitate manufacturing on site.
_ design replaces actuator shown below
portfolio :: michael wybenga 9
SMA power door lock toggle | cont.
design concept one
design concept two
design concept three
NOTE :: Final design is an amalgamation of concept two and three
portfolio :: michael wybenga 10
miscellaneous work
_ personal project
portfolio :: michael wybenga 11
miscellaneous work
_ section of mass produced document transport machine
_ third year work term project
portfolio :: michael wybenga 12
miscellaneous work
geneva
mechanism
shutter
scissor linkage
shutter path
cylindrical joint
drive shaftfeed back sensor
ink pad stamp foam backing
1 2 3
4 5 6
portfolio :: michael wybenga 13
miscellaneous work
_ optical device that allows bicycle riders to see ahead of them when bent over with head down.
_ simple design to facilitate manufacture by manual mill and lathe
_ personal project
_ click for e-drawing