To mount the Zip-On Panel, begin by securing the two neoprene straps to the top row of MOLLE webbing on the rear plate bag.
Once the panel is snapped on, secure the zipper on each side of the plate bag.
The bottom GP pouch can be folded flat for quick access. Both Wide GP pouches also feature a pass through pocket behind them.
Side loops are provided along both sides of the Zip-On Panel. These can be used as attachment points to tie in charges or similar items.
The drop down pocket can separate to allow longer objects such as a holligan tool to fully pass through. Folding the pocket inside out allows this pass through to remain open.
The top GP pouches were designed to carry 40mm grenades or flash bangs and can be used with any SPS pouch inserts.They also have a hidden pocket directly behind them.
The Zip-On Panel has a drop-down pocket designed to carry bolt cutters. The pocket is accessed by separating the hook and loop at the bottom of the panel and unfolding it.
Two center pull straps connect to the back side of the Zip-On Panel to secure the pocket closure. The straps can also be used to divide the pocket opening when bolt cutters or hooligan tools are inserted.
