1
POWDER COATING S'VSTEMS www.powderx.com Phone: 1-800-326-4840 Fax: 256-726-9976 E-mail: sales @ powderx.com Powder-X debuts its Quantum Series batch oven line. Capitalizing on Powder-X's Jet-Fire technol- ogy, operating temperatures are reached up to 400% faster. Gas usage and emissions are sig- nificantly reduced due to proprietary air blending and higher turn-down ratios. Pretreatment sta- tions, booths, dry steam units, and complete automated systems are also available. Circle 031 on reader service card T. GEORGE PODEIJ. & CO. www.cprsystemsonline.com Phone: 574-233-9111 Fax: 574-233-3899 E-mail: [email protected] High-pressure spray wand phosphatizing sys- tem with pressure up to 4,000 psi. Thoroughly clean and phosphatize large metal products prior to liquid or powder coating. Wash water is collected through grade-level drains and com- pletely recycled, reclaiming chemicals for their reuse. Custom-designed high-pressure cleaning power increases paint adhesion and enhances your production line. Circle 036 on reader service card. BLACKSTONE-NEY ULTRASONICS www.blackstone-ney.com Phone: 716-665-2340 Fax: 716-488-9498 E-mail: jmccanna @ blackstone-ney.com Three standard size robust agitation units are designed for heavy-duty industrial parts cleaning using not only high-intensity ultrasonic energy but vertical parts agitation as well. Each incorpo- rates an air-powered agitation platform that agi- tates parts with a six-inch stroke up to 80 times per minute. Standard features include autofill, liquid makeup, pump and filter, overflow weir skimmer, and automatic oil removal system. Ultrasonic time, cleaning tank temperature warm up, filtration, and oil removal are all digitally self- contained. Circle 010 on reader service card ADF SYSTEMS, LTD. www.adfsys.com Phone: 1-800-959-1191 Fax: 1-800-798-5100 E-mail: [email protected] ADF manufactures a washer for any application, whether you need continuous flow or batch sys- tems. Single or multi-stage systems are offered for your cleaning needs, and a complete list of accessories. Whether your requirements are for a standard washer, or a custom system, ADF has a washer for your application. Circle 040 on reader service card T&S ENTERPRISES www.taegerenterprises.com Phone: 813-779-8024 Fax: 813-779-0732 E-mail: [email protected] T&S Enterprises' patented washer "Clear Choice" design makes maintenance easier, pro- motes easy equipment revisions to meet chang- ing process requirements, provides process observation from the exterior of the machine, and allows quicker in-plant installation. The stainless steel and corrosion-resistant materials of construction give you increased equipment life with excellent value for your investment. Each washer is engineered and designed to match your specific process requirements. Circle 035 on reader service card 3~ C.~ CORP. Phone 847-546-8225 www.grievecorp.com Fax: 847-546-9210 E-mail: [email protected] (Attention: Frank Calabrese) No. 830 is an electrically heated, 850°F walk-in oven from Grieve, currently used for heat treat- ing and high-temperature paint baking. The oven features an aluminized steel exterior and interior with 7-in. thick insulated walls, plus a 4-in. thick insulated floor with built-in truck wheel guide tracks. Inner and outer door gaskets are provid- ed.The inner gasket seals against the door plug, while the outer gasket seals directly against the front face of the oven. Circle 045 on reader service card PROGRESSIVE TECHNOLOGIES, INC. www.ptihome.com Phone:616-957-0871 Fax: 616-957-3484 E-mail: jmw@ ptihome.com Progressive Technologies' Robotic Blast System features a 4-axis CNC-controlled gantry robot easily programmed for repeatable nozzle posi- tioning. Its programmable indexing shuttle turn table extends for ease of loading. The pressure media delivery provides control for excellent part processing. Media size control is achieved with the Sweco media classifier. Circle 032 on reader service card CAN-AM ENGINF~,RF.D PRODUCTS INC. www.canamengineered.com Phone:1-800-229-7551 Fax: 734-427-4282 E-mail: turbo @canamengineered.com Can-Am's Turbine-powered Liquid Spray appli- cation system is unique. Its variety of spray guns work very well at pressure ranges of 0.5-8.75 P.S.I and C.F.M. outputs of 9-28. These spray guns are used in many industries utilizing liquid spray application. T.E. improvements provide Can-Am users 30-60% material savings regard- less of the competing technology. Circle 044 on reader service card Fall 2005 7
