One、specification No. Valves of AW series with pneumatic operator are suitable for ９０° reverse〔１／４round〕。Such as ball valve、butterfly valve、plug valve and so on。The design and manufacture are according to JIS standard，the connection is according to international standard ISO5211。 The actuator equipments in our company are mass producing、good function and stable quality。Together with many operating accessories，reasonable appliance。It can be widely used by all kinds of equipments and remote operating of producing line and controlling of valves。

Pneumatic operator’ s equipped model and No.

Pneumatic operating equipped model and No.

Two、Pneumatic operated equipped structure characteristic

         

Duel operating typeSingle operating type〔repositioning spring type〕

Transmission structureStandard typeHigh strength typeLow pressure type

AW13 AW13S - AW13L

double-cylinder

Shifting Fork Organization

AW17 AW17S - AW17LAW20 AW20S - AW20LAW28 AW28S - AW28LAW35 - -AW40 - - -AW60 - - -

①operating equipped model：AW ②operating equipped specification： AW：13、17、20、28、 35、40、60 ③Motion type： AW：/：motion type P：0.3-0.7Mpa S：single motion standard type P：0.4-0.7Mpa L：single motionlow pressure type P：AW13L：0.25-0.4Mpa AW17L：0.23-0.36Mpa AW20L：0.28-0.46Mpa AW28L：0.24-0.39Mpa ④SPECIFICATION（choose） /：No environment Temp.（-20～+80℃） A：Frontal motion spring restoration [Supply for pressure lost，counter-clockwise whirl（Top see）] B. Bolt and nut stainless steel requirement C：Use for controlling F：High frequency（500 thousands endure motion，only for dual motion） K：Use for high temp.（0～+180℃） T：Use for low temp.（-45～+60℃） N：Air connection:NPT Use for high speed（AW、AW-S） ⑤Subordinate institution：（choose） /：No subordinate institution L：Open resist equipment H：Dual motion with hand lever（AW13） HG：Dual motion gear operated equipment（AW17、AW20、AW28） HW：Single operated lateral hand wheel（AW-S）

AW

Dual motion, double-cylinder with strong strength. P：0.3-0.7Mpa,use for big ormedium size valves，The output torque of shifting fork institutions similar to the operating torque of middle and big size valves

Power character

Three, pneumatic driving device structure characteristic and main component and part

AW-S

Single motion? spring restoration，spring in the cylinder ，safe and reliable。 Stype is atandard type：P：0.4-0.7Mpa

Ltype is low pressure type：P：0.28-0.46Mpa

AW type actuator handling character is similar to the parabola ,suitable to the middle and big size valves.

1, axle bearing [metal lining PTEE] friction coefficients small , lubricate to seal off effect well.2, baffle plate [HT200 (FC200)] makes an air chamber isolate from the organization turning round , cuts down air consumption , prevents dead person from carrying out an air cylinder , at the same time, is piston guiding , ensures that action is stable. 3, enters gas mouth [RC1/4, 3/8 , 1/2]. 4, the piston [HT200 (FC200)] is deft be able to bear pressure , the propulsive force losing the sex minor , sealing up completely well. 5, the piston rod [45 (S45C + HCr)] intensity is high , the surface plates with the hard chromium , able to endure mean. 6, plates with the hard chromium axis pin [45 (S45C + HCr)] outside , balances piston rod output power supplying with a shift fork. 7, hand movement worm gear operation implement assembles platform 8, scrolls [45 (S45C + HCr)] are able to endure mean.9, air cylinder [QT450-10 (FCD450)]. 10, 5 degree of position-limit double-screw bolt adjustment switch angle , respectively adjustable positiveness and negativeness of switch. The O type circle [NBR] is water-proof 11. 12, shift forks, [QT450-10 (FCD450)] changes linear motion into the motion turning round , the valve exporting force moment characteristic property adapting to the middle heavy calibre twists from characteristic property.

13, the box experiences and observes [HT200 (FC200)].Double movement type characteristic: 1st, dials the fork transmission system, its output pitch of strand characteristic suits in the heavy-caliber valve actuates the pitch of strand characteristic. 2nd, the air chamber and the swiveling mechanism isolate, the air consumption are few.

3rd, the two-cylinder double-piston, the output strength isbig. 4th, the volume is small, the weight is light, performreliably. 5th, works P:0.3-0.7MPA ambient temperature T:-20-+80

And dyadic Shan action spring replacement Shan action spring place style pretends to have the spring jar in AW type one side side of

side side of pair of air cylinders, pressure adapting to two kinds operation, the athlete selected for a sports meet moves device (HW , the sidehand wheel). AW-S: Standard form P: 0.4-0.7MPA AW-L: Low pressuretype P: AW13L;0.25-0.40MPA AW17L:0.23-0.36MPA AW20L:0.28-0.46MPA AW28L:0.24-0.39MPA AW35L: AW40L:

Four, pneumatic driving device pair of action style and Shan action style exterior dimension picture

 

SIZE Unit：mm

SIZE AW13AW13SAW17AW17SAW20AW20SAW28AW28SAW35AW35S

A 200 200 - - - - - - - -

m1 68 68 95 95 115 115 158 158 - -

m2 132 132 176 176 232 232 302 302 - -

L 600 1020 800 1260 1140 1510 1460 2060 1860 2605

L1 - 287 - 378 - 530 - 680 - -

L2 - 523 - 610 - 885 - 1160 - -

H 285 285 348 348 425 425 527 527 260 260

H1 157 157 209 209 244 244 305 305 - -

H2 128 128 172 172 213 213 273 273 - -

H3 85 85 105 105 130 130 165 165 - -

C 100 100φ160

φ160 φ200

φ200 φ280

φ280 φ300

φ300

D 132 132φ190

φ190 φ230

φ230 φ316

φ616 φ350

φ350

f M16 M16 M16 M16 M16 M16 M20 M20 M24 M24

g - - 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2

g1 - - - -1/4 - 3/8 - 1/2 1/2 1/2

φd 44 44 50 50 64 64 85 85 105 105

d1 45 45 - - - - - - - -

s 27 27 - - - - - - - -

i 38 38 60 60 75 75 100 100 100 100

φf 80 80 120 120 140 140 220 220 220 220

T 4 4 - - - - - - - -

b - - 12 12 18 18 24 2428×2

28× 2

t 4 4 - - - - - - - -

j - - 99 99 109 109 137 137 - -

K1 - - 110 110 120 120 210 210 - -

K2 - - 80 80 100 100 - - - -

φh - - 19 19 23 23 27 27 - -

wt〔Kg〕

35.8 55.4 75 102.5 130 181 275 398 - -

Five, pneumatic driving device air matches tube main point1、Pair of action style matches tube principle Normal close style ( electrifies opening style ) Chang come untied style ( electrifies breaking a type up )

2, Shan action style matches tube principle Normal close style ( electrifies opening style ) Chang come untied style ( electrifies breaking a type up )

3, the principle ( adjusting style matching tube matches electricity valve locator ) Dual action style Single action style

Six, AW type pair of action style exports the moment of torsion form

Seven, AW-S type Shan action style exports the moment of torsion form

Eight, pneumatic driving device air wastages secretly scheme against

 单位：N.m

specificationAir pressure〔Mpa〕

0.3 0.4 0.5 0.6 0.7AW13 515 620 770 930 1080AW17 950 1270 1590 1910 2230AW20 2150 2870 3580 4300 5020AW28 5150 6860 8580 10300 12020AW35 10120 13500 16870 20250 23620AW40 13220 17630 22040 26450 30860AW50AW60

 Unit：N.m

SpecificationSpring moment of torsion

Air pressure〔Mpa〕

0.4 0.5 0.6

Minimum Maximal Minimum Maximal MinimumMaximalMinimumMaximal

AW13S 230 430 180 330 330 540 490 700

AW17S 330 670 600 930 920 1290 1230 1573

AW20S 1190 1980 880 1670 1600 2390 2320 3110

AW28S 2080 3820 3040 4880 4760 6490 6480 8210

AW35S 4380 8070 5420 9110 8800 12490 12180 15860

AW40S                

AW50S                

AW60S                

 气缸容积： L

规格Model A B A+B

AW13 3.10 3.10 6.20

AW17 6.70 6.70 13.40

AW20 14.80 14.80 29.60

AW28 34.60 34.60 69.20

AW35      

AW40      

AW60      

Nine . The air-operated drive equipment selects with the installation and trial run and the maintenance. 1. before selecting the pneumatics considered first valve's pressure, the temperature, the medium, then determines valve's torque strength: The lubricating fluid increases 20% to take the safety coefficient; The pellet powder lot medium increases 65% to take the safety coefficient, acts according to again was mad that the hydraulic pressure selects the double movement type or the single movement-like torque, the determination air-operated drive equipment model. 2. Before the pneumatics and the valve install, must achieve: 1. valve lever and pneumatics main axle on identical spool thread; 2. The connector and the chassis go through accurate machine work; 3. Ascertain valve operation way (Chang come untied or normal close) , the chassis linking up is assembled on the valve; 4. Ascertain a chassis linking and assembling what be needed direction (straight line or cross spider) a angle , revolution valve stem to get to necessaries handle necessary location; 5. Forbid dismantling the valve being pressed on , use appropriate safety procedure to be a pneumatic device, the installation linking a chassis's is equipment; 6. And then dimension examining that the transmission shaft is suitable including the axis implement and the pneumatic device, the connector uses bolt and valve holder to firm , be OK to pay attention to a valve stem with pneumatic device transmission shaft alignment and implement joint is appropriate including the axis. 3. The pneumatic device is scene appearance , should carry out an upkeep at the regular intervals and takes good care of. Carry out the implement gas source responding to keep clean , clean; The air-filter go along that corresponding to pneumatic device composition uses turns on the water , blows off at the regular intervals, affect the regular job to avoid entering electromagnetic valve and carrying out an implement. Under regular usage situation, respond to every six months check an once , examine and repair an once every year. Ten. Pneumatic driving device accessories function and use. Pair of pneumatic effect driving devices: Control a valve opening an account and being closed down; Pneumatic driving device of Shan effect: Circuit , the gas road are broken up or are close a valve voluntarily when faulty,; The Shan electricity charges electromagnetic valve: The valve opens (be closed down) current supply now and then , the valve closes (open) when blackout; Pair of electricities charge electromagnetic valve: The valve opens a coil when electrify , the valve closes when another coil electrifies. Have the memory function; Answer the message implement: Distant distance delivers valve switch location signal; Electrical equipment locator: The aperture to the valve (is medium according to the size of electric current signals (4 ~ 20 mA) rate of flow) carries out adjustment under the control of; May provide the pneumatic type' locator preventing explosion equally: According to the size of pressure signal (0.02 ~ 0.1 Mpa), control the valve aperture , carry out adjustment under the control of; Pneumatic trigeminy document: Pressure reducing , filter , oil fog implement. To gas source stabilivolt,clean and move component lubrication action; Hand takes up organization: Pawn circuit , the gas road when breaking a malfunction up or having , be used to handle the valve starting and stopping.十一. The points for attention driving device ordering goods is a complicated automation check meter , the consumer control need in the light of , choose following accessories detailedly, and give clear indication of on technology contract to be made up of pneumatic various component. 1, pneumatic driving device: A moves an effect pair , b moves the effect c type only 2, electromagnetic valve: A charges electromagnetic valve b for charging electromagnetic valve c for using the average type of voltage d explosion protection type e pair only 3, the signal couples back: Dyadic a machinery switch b induced average type of dyadic switch d explosion protection type e

4, locator: 5, makes the average type of pneumatic valve of a electricity valve locator b locator c electricity converter d explosion protection type e angry the source sells the trigeminy document at reduced prices: 6, moves a fliteration pressure reducing b oil fog implement personally handling organization 7, peculiar interface dimension 8. Be custom-made peculiarly 

Copyright © Zhengjiang Zhongte pueumatic valve whole set CO.,LTD. All Rights Reserved.