International Energy Resources, LLC.

INTERNATIONAL ENERGY RESOURCES, LLC.

PRESENTSTHE IER ENERGY SAVER (ES)!

Protecting, Preserving & Improving the Environment

The Need for the IER (ES)The Need for the IER (ES)

•In the 21In the 21stst century “ century “Going GreenGoing Green” has ” has become a corporate responsibilitybecome a corporate responsibility

•With the rising cost of doing business, With the rising cost of doing business, Energy Efficiency is a mustEnergy Efficiency is a must

•Help meet the social requirements of Help meet the social requirements of ““Being GreenBeing Green” and reap the financial ” and reap the financial

savingssavings

The ProblemThe Problem

• Electric A/C Motors use more than half of all Electric A/C Motors use more than half of all electricityelectricity

• Electricity Costs:Electricity Costs: – 1960’s1960’s .019/kwh .019/kwh – 1970’s1970’s energy crisis .044/kwh energy crisis .044/kwh – 20082008 .10+ /kwh .10+ /kwh

• Most A/C Induction motors operate at 80% Most A/C Induction motors operate at 80% efficiencyefficiency

• NASA research proved that substantial savings NASA research proved that substantial savings could be made on the running costs of A/C could be made on the running costs of A/C Induction motorsInduction motors

The Power Supply The Power Supply DilemmaDilemma

• The adequacy of North America’s Electricity system will The adequacy of North America’s Electricity system will decline unless changes are made soon…decline unless changes are made soon…

……demand for electricity is expected to increase over the demand for electricity is expected to increase over the next ten years by 19% in the U.S., but confirmed power next ten years by 19% in the U.S., but confirmed power capacity will increase by only 6%capacity will increase by only 6%

-NERC (North American Electric Reliability Council)-NERC (North American Electric Reliability Council)

““Over $16 billion dollars of electricity is Over $16 billion dollars of electricity is unusableunusable energy, energy, but but billablebillable in the US.” in the US.”

- U.S. Dept. of Energy- U.S. Dept. of Energy

How the Utility Company & the How the Utility Company & the Environment BenefitEnvironment Benefit• Enhancement of the capacity of the Enhancement of the capacity of the

existing electrical systemsexisting electrical systems• Power supplied to more customers without Power supplied to more customers without

the generation or acquisition of the generation or acquisition of additional additional power plantspower plants..

• Less fossil fuel being used to generate Less fossil fuel being used to generate powerpower

• Less dependency on foreign oilLess dependency on foreign oil

The Unique Energy Savings with The Unique Energy Savings with the IER (ES)the IER (ES)

• The Patented diagnostic device & methodology The Patented diagnostic device & methodology determines to an exact science how much capacitance is determines to an exact science how much capacitance is required to bring each inductive load to unityrequired to bring each inductive load to unity

• Optimizing is precisely accomplished on each inductive Optimizing is precisely accomplished on each inductive load in minutesload in minutes

• The pre-engineered customized systems are assembled The pre-engineered customized systems are assembled from modular components based on sizing resultsfrom modular components based on sizing results

• Installation is fast and simpleInstallation is fast and simple• Power savings are immediate and can be up to 25%Power savings are immediate and can be up to 25%• Realize a rapid return on investment (often 24 months or Realize a rapid return on investment (often 24 months or

less)less)

IER (ES)IER (ES)

• Innovative, unique & Patented *Innovative, unique & Patented *• U.S. ManufacturedU.S. Manufactured• NASA Tested and usedNASA Tested and used• U.S. Government certifiedU.S. Government certified• UL Listed CSA ApprovedUL Listed CSA Approved• Cleaner & Greener / RoHS CertifiedCleaner & Greener / RoHS Certified• Reduces the amount of non-productive current in Reduces the amount of non-productive current in

your existing electrical system, resulting in a your existing electrical system, resulting in a significant reduction in power consumption costssignificant reduction in power consumption costs

• Thousands of installations worldwideThousands of installations worldwide• 5 year warranty / 12 year on Residential5 year warranty / 12 year on Residential *Methodology & Apparatus *Methodology & Apparatus

How does the IER Energy How does the IER Energy Saver (ES) work?Saver (ES) work?

• The IER (ES) stores the reactive power to create the The IER (ES) stores the reactive power to create the electromagnetic field (EMF) around the inductive windings of a electromagnetic field (EMF) around the inductive windings of a motormotor

• As motors operate, reactive power is “pushed” and “pulled” to and As motors operate, reactive power is “pushed” and “pulled” to and from the (ES) by the motor at 60 cycles per secondfrom the (ES) by the motor at 60 cycles per second

• The IER (ES) stores & releases to motors what they need to The IER (ES) stores & releases to motors what they need to function more efficientlyfunction more efficiently

• Electricity reclaimed and recycled by the (ES) would normally be Electricity reclaimed and recycled by the (ES) would normally be pushed back through the power distribution linespushed back through the power distribution lines

• The IER (ES) reclaims, stores, recycles and supplies Reactive The IER (ES) reclaims, stores, recycles and supplies Reactive power to inductive loadspower to inductive loads

Other BenefitsOther Benefits

• The IER (ES) improves the efficiency of the electrical The IER (ES) improves the efficiency of the electrical system & the kW capacity is increasedsystem & the kW capacity is increased

• Maintains quality voltage levels to your system with less Maintains quality voltage levels to your system with less voltage drops especially long runs of cablevoltage drops especially long runs of cable

• Reduces the harmful effects from the EMF’sReduces the harmful effects from the EMF’s• Less power system losses in your distribution systemLess power system losses in your distribution system• Reduces the heat on wires and motorsReduces the heat on wires and motors• Decreases premature failure of motors and other inductive Decreases premature failure of motors and other inductive

equipmentequipment• Motors run cooler and are more efficientMotors run cooler and are more efficient• Increases the life of the motorsIncreases the life of the motors• Reduces maintenance costsReduces maintenance costs

Causes of Low Power FactorCauses of Low Power Factor

• Inductive loads are usually the major portion of Inductive loads are usually the major portion of the power consumed in commercial buildings & the power consumed in commercial buildings & industrial complexes – 80% or moreindustrial complexes – 80% or more

• Types of Inductive loads (reactive Power)Types of Inductive loads (reactive Power)– TransformersTransformers– MotorsMotors– CompressorsCompressors– Fluorescent lighting with T-12 ballastsFluorescent lighting with T-12 ballasts– Older style high intensity discharge lighting (HID)Older style high intensity discharge lighting (HID)– Lightly loaded motors are wasteful and result in lower Lightly loaded motors are wasteful and result in lower

power factorpower factor

Power Factor CorrectionPower Factor Correction

• A 20A 20thth Century Technology Century Technology• Installed on the line side near the main serviceInstalled on the line side near the main service• Main purpose is for the utility company to “clean up” their Main purpose is for the utility company to “clean up” their

“dirty Power” “dirty Power” and saves the electric company moneyand saves the electric company money

Power factor OptimizationPower factor Optimization• A 21A 21stst Century Technology Century Technology• Installed on the demand side, close to the equipmentInstalled on the demand side, close to the equipment• Reduces amperage kWH (slows the meter)Reduces amperage kWH (slows the meter)• Saves the customer moneySaves the customer money• Reduce or eliminate Power Factor Correction penaltiesReduce or eliminate Power Factor Correction penalties

Why you should optimize Why you should optimize Power Factor?Power Factor?

• Reducing Amperage & kW usage, directly Reducing Amperage & kW usage, directly reflects dollar savingsreflects dollar savings

• Reduce the monthly “demand charge”Reduce the monthly “demand charge”• Eliminate the primary power factor Eliminate the primary power factor

surcharge penaltysurcharge penalty– Utilities usually charge customers an Utilities usually charge customers an

additional fee (up to 25% more) when their additional fee (up to 25% more) when their power factor is less than 0.85 (PFC power factor is less than 0.85 (PFC equipment)equipment)

Installing the IER (ES) UnitsInstalling the IER (ES) Units

• 2 Types of installations with the IER 2 Types of installations with the IER (ES)(ES)

Panel Mount Panel Mount – accumulation of smaller – accumulation of smaller inductive loadsinductive loads• Single Phase panel mountSingle Phase panel mount• Three Phase panel mountThree Phase panel mount

Equipment Mount Equipment Mount – Larger individual – Larger individual inductive loadsinductive loads

Return on InvestmentReturn on Investment

Depends On:Depends On:• Age of EquipmentAge of Equipment• Percentage of PF optimizationPercentage of PF optimization• kW per hour chargedkW per hour charged• Run time of inductive loadsRun time of inductive loads• Panel mount or equipment mountPanel mount or equipment mount• Amount of equipment and labor Amount of equipment and labor

needed for optimizationneeded for optimization

Appoquinimink School District, DEAppoquinimink School District, DE

8 out of 10 Schools

Total = 38% Savings

Measuring Power Factor

Select Power Factor

Clamp Load Wire

Leads on Positive and Ground

Read and record initial power factor and Amps

Initial Amps

33.85

Optimized Amps 27.30

6.55 Amp Difference

19.35% Reduction

WHY NOW?•Conditioned power can increase the

life of all electric motors in the facility leading to reduced maintenance costs.

•Up to 25% SAVINGS realized immediately upon installation.

•Environmentally responsible organizations are leading the charge in Protecting, Preserving & Improving our environment.