Date post: | 30-Dec-2015 |
Category: |
Documents |
Upload: | gavin-peregrine-dixon |
View: | 216 times |
Download: | 3 times |
Power Saving Business
Plan
Copyright 2011 IDSYS Co.,Ltd. All rights reservedⓒ
• Fluorescent tube luminaire
• 36W X 2tube=72W
89% Saving
20%
40%
60%
80%
100%
Max. 89% energy saving per month (in comparison with 500 sets of fluorescent tube luminaire)
313USD/Month2,800USD/Month
• BioLED Lamp
• 40W
2
The Foundation of BioLED TechnologyThe Foundation of BioLED Technology
Sensitivity of the visual cell is controlled by the substance called rhodopsin,
and this substance is created by the decomposed energy from the light which creates the vision for people. If the intensity of illumination decreases, rhodopsin composes and builds up to its right level. Moreover, if this is well composed, vision inure to the dark and this phenomenon is called “Dark Adaptation”
Weber’s law can be simply put like the equation below: K = ( R2 – R1 ) / R1 = △ R / R1 (K: Weber’s invariable R1: First stimulation R2: Later stimulation)
Weber’s law only regulate whether the human body feels it or not. However, as we have discussed above, BioLED’s intensity of illumination system do not require “not to feel”, but do require the estimate amount so that “human body may feel it based on vision cell, but not by one’s sense.”
Concept of BioLED
Applied Technologies for BioLED
3
Differentiating Factor 1: Maintaining minimum intensity of illumination
◈ Guarantee the clear picture of the CCTV by providing the perfect brightness
◈ Almost no differences in power consumption as compared with the power-off condition
of normal sensor lighting
◈ Can expect twice as longer LED life by using a lower current than a rated current
Normal Sensor Lighting BioBioLEDLED Sensor Lighting
BioLED Sensor Lighting
4
After 120 secondsAfter 120 seconds
Maximum Brightness (40W) Dimming Mode(4W)
◈ Due to 120 seconds of interlock change of intensity of illumination, one’s eye can’t percept
◈ On/off button system which usually decreases the life time of the lamp, BioLED has solved the problem. With low usage of electricity and solving the overheating problem, BioLED can last at least two times longer
◈ Even it gets dim, it never affect CCTV recording
◈ Due to 120 seconds of interlock change of intensity of illumination, one’s eye can’t percept
◈ On/off button system which usually decreases the life time of the lamp, BioLED has solved the problem. With low usage of electricity and solving the overheating problem, BioLED can last at least two times longer
◈ Even it gets dim, it never affect CCTV recording
Differentiating Factor 2: Biometric dimming control
5
Interlock Control
Differentiating Factor 3: Interlock control - Cyber Carpet System
◈ Light gradually controlled by sensor (From 100% to 10% brightness, 16 levels)
◈ Controlling system comes with the CPU, therefore no need for a separate controller
◈ Reciprocal interlocking operation between LEDs with the LAN cables
(Core patent technology)
◈ Light gradually controlled by sensor (From 100% to 10% brightness, 16 levels)
◈ Controlling system comes with the CPU, therefore no need for a separate controller
◈ Reciprocal interlocking operation between LEDs with the LAN cables
(Core patent technology)
6
Independent Controller
◈ Controls to 16 levels of brightness – to minimize potential power usage and to tune every different environment
◈ Helps to avoid malfunction of lighting by hot air from vehicles
◈ Steps of motion sensor [Sensor detects movement => Full brightness for 30 seconds => Light dims for 2 minutes => Minimum brightness maintained]
◈ Controls to 16 levels of brightness – to minimize potential power usage and to tune every different environment
◈ Helps to avoid malfunction of lighting by hot air from vehicles
◈ Steps of motion sensor [Sensor detects movement => Full brightness for 30 seconds => Light dims for 2 minutes => Minimum brightness maintained]
Core TechnologyCore TechnologyCore TechnologyCore Technology
Switch to set minimum degree of brightness(16 phases)Switch to set minimum degree of brightness(16 phases)
Interlocking Cable
connected
Interlocking Cable
connected
7
BioBioLEDLED 40W Flat light -40W Flat light -Technical Description
Light Light SensorSensor
ProductProduct SpecificationSpecificationProductProduct SpecificationSpecification
4646
Unit : mmUnit : mm
183183
183183
12401240
145145
4646
▶ Sensor-type Dimming LED Flat Light (40W~4W) • differentiated with normal on/off sensor light• no need for a separate controller as controlling system comes with the CPU• reciprocal interlocking operation between LEDs with the LAN cables
▶ Power Saving Mode – 4W ▶ Sensor Algorithm • sensor detects movement => full brightness at 40W for 2 minutes => Light dims for 2 minutes => Maintain minimum brightness at 4W
▶ Application • underground parking lots• interior light• hallway, stairway, etc…
Type Unit BL-40-PS-AA Symbol
Power Consumption W 40 Max.
Color Rendering 75 -
Input Voltage V 220 -
Color Temperature K 6,000~7,100 Kelvin
Lumen Lm 2,600 Lumen
Act Temp ℃ -20 ~ 60 -
Dimension mm 1240 X 183 X 46 Size
Illuminance Lx 680 -
Light Light SensorSensor
4646
139139
139139
10661066
106106
4646
8
BioBioLEDLED 22W Flat light -22W Flat light -Technical Description
▶ Sensor-type Dimming LED Flat Light (22W~4W) • differentiated with normal on/off sensor light• no need for a separate controller as controlling system comes with the CPU• reciprocal interlocking operation between LEDs with the LAN cables
▶ Power Saving Mode – 4W ▶ Sensor Algorithm • sensor detects movement => full brightness at 22W for 2 minutes => Light dims for 2 minutes => Maintain minimum brightness at 4W
▶ Application • underground parking lots• interior light• hallway, stairway, etc…
ProductProduct SpecificationSpecificationProductProduct SpecificationSpecification
Type Unit BL-22-PS-AA Symbol
Power Consumption W 23 Max.
Color Rendering 75 -
Input Voltage V 220 -
Color Temperature K 6,000~7,100 Kelvin
Lumen Lm 1,495 Lumen
Act Temp ℃ -20 ~ 50 -
Dimension mm 1066 X 139 X 46 Size
Illuminance Lx 380 -Unit : mmUnit : mm
9
4646
139139
139139
706706
106106
4646
Light Light SensorSensor
BioBioLEDLED 13W Flat light -13W Flat light -Technical Description
▶ Sensor-type Dimming LED Flat Light (12W~4W) • differentiated with normal on/off sensor light• no need for a separate controller as controlling system comes with the CPU• reciprocal interlocking operation between LEDs with the LAN cables
▶ Power Saving Mode – 4W ▶ Sensor Algorithm • sensor detects movement => full brightness at 12W for 2 minutes => Light dims for 2 minutes => Maintain minimum brightness at 4W
▶ Application • underground parking lots• interior light• hallway, stairway, etc…
ProductProduct SpecificationSpecificationProductProduct SpecificationSpecification
Type Unit BL-13-PS-AA Symbol
Power Consumption W 13 Max.
Color Rendering 75 -
Input Voltage V 220 -
Color Temperature K 6,000~7,100 Kelvin
Lumen Lm 845 Lumen
Act Temp ℃ -20 ~ 60 -
Dimension mm 706 X 139 X 46 Size
Illuminance Lx 210 - Unit : mmUnit : mm
10
Comparision TableComparision TableComparision TableComparision TableFluorescent Lamp
32W*2Other LEDs
(40W)BioLED(40W)
Results
Light Source Fluorescent Lamp LED LEDSemiconductor lamp /
discharge tube
Mercury Content 25 mg X X
Luminous Efficiency(lm/W) 54lm/W +70lm/W +70lm/W System Efficiency
Power Consumption(W) 68 W 40 W 40 W
Power Efficiency(%) 100 % 60 % 15 %
Compared to other LED, 45% power saved
Sleep Mode N/A N/ARun by 4W
in sleep modeWith BIOLED,
at least 85% power savedMax. Illumination
@1m 700 lx 700 lx 700 lx
Type Vertical Vertical Vertical
Life Span8,000 ~ 10,000hrs 50,000hrs + 50,000hrs
Fundamentally, it is guaranteed that life span of LED Light is 5 times longer than of Fluorescent Lamp. However, some LED products broken down within 6 months from the installation due to the overheating issue. With low usage of electricity and solving the overheating problem, BioLED can guarantee at least 3 to 5 years life span.
11
▶ As of June
2010CustomerQuantit
yConstruction Remark
Federation of Private Taxi Driver’s Association
23 Aug. 2009
MBC Ilsan Dream Center 40 Nov. 2009 Demonstration Project
The Saemaeul Finance, Ganwon-do Branch 5 Dec. 2009
Shinil 1-cha APT, Shingok-dong, Uijeongbu 270 Feb. 2010
Chungdam Maeul APT, Dukjeong-dong, Yangju
520 Mar. 2010
Sungho APT, Howon-dong, Uijeongbu 270 Mar. 2010
Lucky APT, Oneui-dong, Chunchon 26 Mar. 2010
Samsung APT, Daun-dong, Ulsan 154 May 2010
Sungnam Toll-Gate, Korea Highway 39 Jun. 2010
Shinwon APT, Bun 3-dong, Seoul 202 Under Construction
Hanla Vivaldi APT, Todang-dong, Goyang 303 Under Construction
Construction SituationConstruction Situation
12
Financing StructureFinancing Structure
Shinhan Bank - Apartment Well-Being Loan ▶ Financing service providing the total cost of construction to the construction companies who win the contract for
the construction of apartment public facilities.
BorrowerAPT Resident
Resident Committee
Construction Contract
Payment of maintenance fee
Application for Transfer of obligation
Agreement on transfer of obligation
Loan payment request
Loan repayment
Payment of construction cost
Transfer of obligationLoan contract
BANK
13
14
15
Thank You!Thank You!
IDSYS Co., Ltd.IDSYS Co., Ltd.http://www.id-sys.co.krhttp://www.id-sys.co.kr
Copyright 2011 IDSYS Co.,Ltd. All rights reservedⓒ