Power System ProtectionApplication Training

5 Day Course30th October to 3rd November 2017

MWC ClubMahindra World City

Chennai, India

this COURSE

TRAINING COURSESby PEARL

Participants

“An investment in knowledge always pays the best interest”

- Benjamin Franklin

Learning is a continuous process and it enables one to be competitive in their field. Successful organizations across the world give high priority for training their employees regularly. With technology changing continuously and power system growing in complexity & size, updating the knowledge of the power system operation, maintenance and design staff has become a necessity. In addition to increasing the quality and efficiency of the staff, it also increases the general job satisfaction level and helps in retaining employees.

Consistent with this belief and built on a strong experience in the field of Power System Protection and Automation, PEARL offers an extensive range of training modules for practicing professionals at different capacities, from fresh to experienced engineers. Our training modules cover the

entire spectrum of power system protection, including generation, transmission, distribution and industrial systems. These courses are designed to suit professionals at different responsibilities such as research, design, application, operation & maintenance, testing & commissioning, etc. We also create new modules to meet specific requirements of our customers.

We differentiate our training offerings with our highly skilled faculty and by being flexible and customizing the modules to the needs of our trainees. Our courses package a wealth of fundamental knowledge, theoretical studies, several numerical examples and are enriched with real field case studies.

This course is designed to benefit practicing engineers. It will be useful to engineers with design, application, engineering, operation, planning or commissioning responsibilities.

This five day course on power system protection application is designed to cover protection of equipments commonly encountered in industrial power systems such as generators, transformers, cables and motors.

Sessions specially designed to discuss aspects of protection philosophy, techniques for fault calculation and selection of instrument transformers are also included.

The topics of the course and the sequence in which the topics are taught have been carefully planned to help the participants understand the subject easily.

After successful completion of this course, participants would be able to understand the fundamental philosophy of various power system protection applications. They would also gain knowledge on basic fault analysis, helping them to analyze system events and perform post fault trouble shooting and suggest improvements.

With the knowledge gained in this course, they would be able to operate and maintain the protection systems better and also perform effective and fast trouble shooting when required.

The number of trainees in the course is limited so as to ensure better interaction and individual participation of every trainee.

To be effective, the minimum pre-requisite for this course is a graduate electrical engineering degree or diploma. Participants with ITI certification must have at least two years of relevant work experience to enable easy learning during this course.

theCOURSE OUTLINE

FUNDAMENTAL CONCEPTS- Various elements of power system - Operating states of the power system- Building blocks of protection system- Vital properties of a protection system- Zones of protection- Main and back-up protection- Monitoring of protection system

BASIC FAULT CALCULATIONS- Types of faults - Single-phase and three-phase fault

calculations- Per unit calculation method- Worked examples for fault calculations

INSTRUMENT TRANSFORMERS- Types of current transformers- Effect of current transformer core and

winding design on its performance- Causes of errors in current transformers- Reasons for saturation of current

transformers and its effect on protection- Specification of current transformers used

for protection and metering applications- Types of voltage transformers- Specifying voltage transformers for

protection and metering applications- Various methods of connection of voltage

transformers and their application

OC AND EF PROTECTION- Different types of over current protection

devices- Various operating characteristics of over

current protection function and their application

- Philosophy for selecting the settings of OC and EF protection for various applications

- Procedure for coordinating over current and earth fault protections

- Application of sensitive earth fault protection and their settings

- Use of directional relays and their settings- OC and EF worked examples- OC and EF coordination tutorial

TRANSFORMER PROTECTION- Types of 3-phase transformer connections- Fault current distribution in 3-phase

transformers- Types of faults in transformers- Transformer differential protection- Restricted EF protection for star and delta

winding- Backup OC and EF protection- Ancillary protection of transformers

INDUCTION MOTOR PROTECTION- Characteristics of induction motors- Thermal overload protection of motors- Locked rotor and stalling protection- Supply voltage unbalance protection- Short circuit protection- Earth fault protection

GENERATOR PROTECTION- Types of faults possible in synchronous generator- Protections for detecting phase-phase, phase-ground and inter-turn faults in stator winding- Earth fault protection of rotor windings- Loss of excitation protection- Principle for detecting loss of prime moverand its setting for various types of prime movers- Operating principle of protection for detecting abnormal operating conditions of generators- Principle of backup protection of generators against uncleared system faults

TO ENROLLThe charges for this 5 day course are:

For participants from India : Rs. 40,000/- per participant* For participants from outside India: $ 1,000/- per participant** The above fees includes GST

Lunch and day time refreshments shall be provided during the course. Participants will have to make their own arrangement for stay and transportation.

To participate in this course, kindly register online at the following course website http://www.pearlabs.com/PC10201701/

Alternatively contact us via phone or email us: Phone/Fax: +91 44 27460029 E-mail: training@pearlabs.com

On receipt of registration form, we will send an invoice indicating the fees payable and the mode of payment. Each participant will have to submit individual forms. On request we can provide one invoice for multiple participants from the same organization. Enrollment to the course will be confirmed only on receipt of the fees.

We will be happy to provide assistance in arranging hotel accommodation for outstation participants. We will also provide invitation letters to overseas participants to enable them to apply for visa to travel to India. Kindly indicate if you require any such assistance.

about PEARL

Protection Engineering And Research Laboratories provides expert technical solutions in the field of Power System Proteciton and Automation. At PEARL we have highly qualified people with decades of industrial and academic expereince. We have expertise to offer in a wide range of activities including research, design, application, engineering and on-site troubleshooting.

Established in 2007, PEARL has been offering its services to major industries and utilities in Asia and Australia. We provide our services to conduct various power system studies including protection setting & coordination, load flow, short circuit, transient stability and motor starting studies. In addition to conducting power system and protection studies, we specialize in conducting post fault analysis to identify the root cause of power interruptions and provide solutions to avoid such incidents in future.

We have conducted training programs for participants from different parts of Asia and Australia. We have experience in training engineers from power generation, transmission and distribution utilities and also from different types of industries including steel, oil & gas, mining, cement and aluminum.

Providing power system and post fault analysis consultancy gives us exposure to power systems and practices across the globe and keeps us updated with the latest products and systems. This enriches the quality and effectiveness of our training courses.

At PEARL we firmly believe that regular infusion of fresh talent into the field is the key to the sustained growth of the power industry. We allocate considerable resources to create enthusiasm in young engineers and motivate them to choose a career in the field of power system protection & automation.

With a vision to become a global centre of excellence in the field of Power System Protection and Automation, we at PEARL are committed to our core beliefs and values viz., Innovation, Integrity, Quality, Commitment and Customer Relationship.

OUR FACULTYThis course would be conducted by our following two faculties:

1. Dr. G. Pradeep Kumar, Ph.D, MIET, MIEEE

2. Dr. M. Tamije Selvy, Ph.D, MIEEE

Dr. Pradeep and Dr. Tamije together established the Protection Engineering And Research Laboratories and manage its operations. They personally involve in every technical service provided by PEARL.

Both of the faculties have their doctorates from the University of Western Ontario, Canada. Over the past 7 years, they have conducted large number of training programs to engineers from utilities and industries in many Asian countries and Australia.

Dr. Pradeep has more than 22 years of experience in power system protection. He has a wide experience in protection system design, application, testing and commissioning. He had worked with ALSTOM, India for over 8 years before pursuing his doctoral degree program.

Dr. Tamije has more than 18 years of experience in power system protection. She has a wide experience in power system and protection modelling and testing.

OUR CLIENTELE

Some of the major clients we have provided our services to in the recent past:

OEMs & EPC ContractorsAlstom, ABB, Siemens, Easun Reyrolle, Larsen & Toubro, ETA Dubai, Tadmur Doha, Tata Projects, GE, Schneider

IndustriesIndian Oil, Shell, NALCO, DUBAL, GASCO, Qatar Petroleum, PDO Oman, Exon Mobil, Essar Steel, CPCL, HPCL, MRPL, Rio Tinto

UtilitiesPower Grid India, TNB Malaysia, SESCO Malaysia, NGCP Philippines, Dewa Dubai, MEA Thailand, PTTEP Thailand, NTPC India, Ausnet, PLN Indonesia, NEEPCO

ConsultantsTesla New Zealand, Petrofac, Technip, CPRI, M N Dastur & Co, Fitchner, SMEC Australia.

Over

1900engineers trained since 2007

From

26countries

TESTIMONIALS “I truly appreciate Dr. Pradeep and Dr. Tamije’s patience in guiding us to

understand power system from a very simple perspective. I have never understood power system as much as I do now.”

- Tan Sien Hun, TNB, Malaysia

“I liked most the ability of the trainers to explain the most complicated subject in a very simple way so that it is easily understood.”

- A. Roy, IOCL, India.

“I liked the detailed discussion & elaboration about small small things as abeginner towards moving to depth of the subject.”

- A. K. Prajapati, IOCL, India.

“I appreciate the training mechanics wherein queries related to the subject matter in discussion are addressed immediately.”

- Glenn L. Girao, NGCP, Phillippines

“Outstanding lecturer with mastery of subject and orderly discussion making us participative.”

- Edgar Fronds, NGCP, Phillippines

An ideal opportunity to enrich your technical Knowledge and experience history & culture. Dont miss it!!

Protection Engineering And Research LaboratoriesNo. 77, 1st floor, Bharathiar Street, Veerapuram, Mahindra World City, Chengalpattu - 603004, Kanchipuram district, TN, INDIA

Phone / Fax : +91 (0)44 27460029, E-mail: training@pearlabs.com, Website: www.pearlabs.com

TRAINING VENUE

P27/1, 2nd Avenue,Mahindra World City, Chengalpattu, New ChennaiKancheepuram district, Tamil Nadu - 603004

Telephone: +91-44-4940-0000http://mwcclub.mahindraworldcity.com/about-us/mwc-club/

CITY of CHENNAIChennai (formerly known as Madras) is the fourth largest metropolitan city of India. It is both the commercial and cultural capital city of the south- eastern state of Tamil Nadu. The city is located on the Coromandel Coast of the Bay of Bengal. Rightly known as an exotic state, Chennai is famous for its cutworks in the temples, coconut fringes,

and silk sarees. This 350 year old city is surrounded by the green environment and gifted by the rich traditional charm of art and culture.

The training venue shall be the Mahindra World Club in Mahindra World City, located at the suburbs of Chennai. S t r a t e g i c a l l y situated between thriving industrial h u b s a n d historical places, M W C i s w e l l

connected to airport, railway station and bus stops.

The temple town of Kancheepuram, with a large number of historical temples, is around 30 kms from MWC. Kancheepuram is also known for its exquisite silk sarees. The UNESCO Heritage Site of Mahabalipuram, with its shore temple, beaches and sulptures, a must see place, is stuated at around 35kms rom MWC.