Date post: | 22-Mar-2016 |
Category: |
Documents |
Upload: | sunlite-mitre-10 |
View: | 216 times |
Download: | 0 times |
Limited Edition Power Pack 35 Piece Pack Includes:DV18DL Impact (Hammer) Driver Drill, CR18DL Reciprocating Saw, G18DL Angle Grinder, R18DL Wet & Dry Vacuum, UB18DL Lantern, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Site Bag
Limited Edition Power Pack 4
2 Piece Pack Includes:DV18DSL Impact (Hammer) Driver Drill, WH18DSL Impact Driver, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Charger And Carry Case
Limited Edition Power Pack 1
2 Piece Pack Includes:DV18DL Impact (Hammer) Driver Drill, WH18DL Impact Driver, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Carry Case
Also available: Power Pack 22 Piece Pack Includes:DV18DL Impact (Hammer) Driver Drill, WR18DL Impact Wrench, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Carry Case
Limited Edition Power Pack 62 Piece Brushless Pack Includes:DV18DBL Impact (Hammer) Driver Drill, WR18DBDL Impact Wrench, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Charger And Carry Case
Also available: Power Pack 52 Piece Brushless Pack Includes: DV18DBL Impact (Hammer) Driver Drill, WH18DBDL Impact Driver, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Charger And Carry Case
Visit www.hitachibonusbattery.com.au to Redeem Online!
Full Terms and Conditions Apply, see website for details. Eligible products are limited to 18V 3.0Ah Tool Sets (which must include a tool, 2 batteries and a charger only) and Limited Edition Power Packs. Valid for purchases between 15.01.12 - 31.03.12
Products Marked With This Symbol Are Eligible For A Bonus Battery!
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Batteries & Charger Sold Separately
18V Slide Reciprocating Saw CR18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
18V Slide 115mm Angle Grinder G18DSL18V Slide Circular Saw C18DSL18V Slide Jigsaw CJ18DSL
18V Slide Blower & Vacuum RB18DSL(H4)18V Slide Wet & Dry Vacuum R18DSL(H4)
Batteries & Charger Sold Separately
• Capable of Approx. 29mins Continuous Run Time When Using 3.0Ah Battery • Semi Transparent Dust Case• Lightweight At 1.5kg (With 3.0Ah Li-ion Battery)
• Blade Can Be Loaded In Upward Or Downward Direction • Tool-less Blade Change• External Access To Carbon Brushes
• 165mm Blade With Cutting Capacity Up To 57mm • Electric Brake And Magnesium Blade Cover
• Compact, Slim, Soft Grip Body And Lightweight At 1.8kg • Safety Overload Circuit And Anti-Start Safety Override When Replacing Batteries
• Three Mode Orbital Action Or Straight Cut• Tool-less Blade Change • Integrated Dust Blower
• Capable of Approx. 19mins Continuous Run Time When Using 3.0Ah Battery• Can Be Converted To Vacuum With Optional Accessory: Dustbag 323587 • Lightweight At 1.7kg (With 3.0Ah Li-ion Battery)
18V Slide Impact Driver WH18DSAL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
• 145Nm Tightening Torque• Lightweight At 1.5kg • Steel Belt Hook
18V Slide Li-ion Range
Also available: ‘Naked’ CR18DSL(H4)
Also available: ‘Naked’ G18DSL(H4)
* Only Available Naked * Only Available Naked
Also available: ‘Naked’ C18DSL(H4) Also available: ‘Naked’ CJ18DSL(H4)
Also available: ‘Naked’ WH18DSAL(H4)
18V Slide Rotary Hammer Drill DH18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• SDS Plus Chuck With 16mm Max Drilling Capacity• Two Mode Action: Hammer Drilling For SDS Plus Drill Bits And Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits
Also available: ‘Naked’ DH18DSL(H4)
Simply purchase any eligible Hitachi 18V 3.0Ah Tool Set or Limited Edition Power Pack between 15.01.12 and 31.03.12 from an authorised Hitachi Dealer and redeem a BONUS 18V 3.0Ah battery online!
www.hitachibonusbattery.com.au
Keep an eye out for this symbol to redeem your
bonus battery!
18V Slide Impact Wrench WR18DBDL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 250Nm Tightening Torque • 30% More Efficient Hitachi Brushless Motor • 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
18V Slide Impact (Hammer) Driver Drill DV18DBL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
18V Slide Driver Drill DS18DBL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 30% More Efficient Hitachi Brushless Motor• 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required • 2 Speed Gearbox With All Metal Gears
18V Slide Compact Drills DS/DV18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
18V Slide Driver Drill DS18DSFL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
• 13mm Keyless Chuck• Steel Belt Hook• 2 Speed Gearbox With All Metal Gears
• 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock• 2 Speed Gearbox With All Metal Gears • 57Nm Hard Torque
18V Slide Impact Driver WH18DBDL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
18V Slide Impact Driver WH18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 145Nm Tightening Torque • Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit • Steel Belt Hook
• 30% More Efficient Hitachi Brushless Motor• 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required • 2 Speed Gearbox With All Metal Gears
• 165Nm Tightening Torque • 30% More Efficient Hitachi Brushless Motor• 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
Also available: ‘Naked’ DV18DBL(H4)
Also available: ‘Naked’ WR18DBDL(H4)
Also available: ‘Naked’ WH18DBDL(H4)
18V Slide Li-ion Range
DS18DSLDriver Drill
DV18DSLImpact (Hammer) Driver Drill
Also available: - ‘Naked’ DS18DSFL(H4) - Slide Impact Driver Drill DV18DSFL / ‘Naked’ DV18DSFL(H4)
Also available: ‘Naked’ DS18DBL(H4)
Also available: ‘Naked’ WH18DSL(H4)
Also available: - 'Naked' DV18DSL(H4) - 'Naked' DS18DSL(H4)
18V Slide Electronic Pulse Driver WM18DBL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 33Nm Tightening Torque • 30% More Efficient Hitachi Brushless Motor• Industry First Low Noise Electronic Pulse System• 5 Operation Modes - Easily Select The Right Function For The Right Job
Also available: ‘Naked’ WM18DBL(H4)
NEW
AM/FM Radio UR18DSL(H4)
Includes AC Adaptor
• Compatible With All Hitachi 9.6V - 18V Slide & Cassette Batteries (Excluding 10.8/12V Peak)• Compatible With iPod, MP3 And CD Players
* Only Available Naked
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Batteries & Charger Sold Separately
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Batteries & Charger Sold Separately
18V Cassette Wet & Dry Vacuum R18DL(H4)
18V Cassette Jigsaw CJ18DL 18V Cassette Blower & Vacuum RB18DL(H4)
18V Cassette 115mm Angle Grinder G18DL
• Capable of Approx. 29mins Continuous Run Time When Using 3.0Ah Battery• Semi Transparent Dust Case• Lightweight At 1.5kg (With 3.0Ah Li-ion Battery)
• Three Mode Orbital Action Or Straight Cut• Tool-less Blade Change • Integrated Dust Blower
• Capable of Approx. 19mins Continuous Run Time When Using 3.0Ah Battery • Can Be Converted To Vacuum With Optional Accessory: Dustbag 323587 • Lightweight At 1.7kg (With 3.0Ah Li-ion Battery)
• Compact, Slim, Soft Grip Body And Lightweight At 1.9kg• Safety Overload Circuit And Anti-Start Safety Override When Replacing Batteries
18V Cassette Li-ion Range
18V Cassette Reciprocating Saw CR18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
18V Cassette Circular Saw C18DL
• Blade Can Be Loaded In Upward Or Downward Direction• Tool-less Blade Change• External Access To Carbon Brushes
• 165mm Blade With Cutting Capacity Up To 57mm• Electric Brake And Magnesium Blade Cover• Base Plate Fine Angle Adjustment
* Only Available Naked
* Only Available Naked
Also available: ‘Naked’ CR18DL(H4)
Also available: ‘Naked’ C18DL(H4)
Also available: ‘Naked’ CJ18DL(H4)
Also available: ‘Naked’ G18DL(H4)
18V Cassette Hedge Trimmer CH18DL
Includes 1 x 1.5Ah Li-ion Battery with MPC and Cooling Charger
• 520mm Blade• 15mm Cutting Capacity• Up to 50 min Run Time (With 1.5Ah)
Also available: ‘Naked’ CH18DL(H4)
COMING SOON IN 18V SLIDE!
NEW
Simply purchase any eligible Hitachi 18V 3.0Ah Tool Set or Limited Edition Power Pack from an authorised Hitachi Dealer and redeem a bonus 18V 3.0Ah
Battery!
Products Marked With This Symbol Are Eligible For A Bonus Battery!
Visit www.hitachibonusbattery.com.au to Redeem Online!
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
18V Cassette Impact Driver WH18DL18V Cassette Impact Driver WH18DFL18V Cassette Impact Wrench WR18DL
18V Cassette Driver Drill DS18DL18V Cassette Driver Drill DS18DFL
18V Cassette Impact (Hammer) Driver Drill DV18DL18V Cassette Rotary Hammer Drill DH18DL
• SDS Plus Chuck With 16mm Max Drilling Capacity• Two Mode Action: Hammer Drilling For SDS Plus Drill Bits And Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
18V Cassette Impact (Hammer) Driver Drill DV18DFL
• 13mm Keyless Chuck• Lightweight At 1.6kg• 2 Speed Gearbox With All Metal Gears
• Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit• 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock • 2 Speed Gearbox With All Metal Gears
• 13mm Single Sleeve Keyless Chuck • Lightweight At 1.7kg • 2 Speed Gearbox With All Metal Gears
• Two Power Mode: Save Mode For Small Bit or Power Mode For Larger Bit • 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock • 2 Speed Gearbox With All Metal Gears
• 150Nm Tightening Torque • Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit• Belt Hook With LED Light
• 130Nm Tightening Torque• Lightweight At 1.5kg• Belt Hook With LED Light
• 150Nm Tightening Torque• Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit• Belt Hook With LED Light
18V Cassette Li-ion Range
Also available: ‘Naked’ DH18DL(H4) Also available: ‘Naked’ DV18DFL(H4) Also available: ‘Naked’ DV18DL(H4)
Also available: ‘Naked’ DS18DFL(H4) Also available: ‘Naked’ DS18DL(H4)
Also available: ‘Naked’ WR18DL(H4) Also available: ‘Naked’ WH18DFL(H4) Also available: ‘Naked’ WH18DL(H4)
18V Cassette High Torque Impact Wrench WR18DHL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 480Nm Tightening Torque • Forward & Reverse Rocker Switch• Bright LED light
Also available: ‘Naked’ WR18DHL(H4)
NEW
COMING SOON IN 18V SLIDE!
• Fires 50 - 90mm 34° Framing Nails• Sequential & Bump Fire Trigger• Tool-less Depth Dial• Industrial Strength Top Housing
• Fires 32-65mm DA Series Finish Nails• Sequential & Bump Fire Trigger• Integrated Air Duster• Tool-less Depth Dial
DA Finish Nailer NT65MA4Framing Nailer NR90AD
14.4V Slide Li-ion Range
Pneumatics
14.4V Slide Impact Wrench WR14DBDL
• 235Nm Tightening Torque• 30% More Efficient Hitachi Brushless Motor• 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
14.4V Slide Impact (Hammer) Driver Drill DV14DBL 14.4V Slide Impact Driver WH14DBDL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
14.4V Slide Driver Drill DS14DBL
• 30% More Efficient Hitachi Brushless Motor• 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required • 2 Speed Gearbox With All Metal Gears
• 160Nm Tightening Torque• 30% More Efficient Hitachi Brushless Motor• 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
• 30% More Efficient Hitachi Brushless Motor• 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required • 2 Speed Gearbox With All Metal Gears
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Also available: ‘Naked’ DV14DBL(H4) Also available: ‘Naked’ WH14DBDL(H4)
Also available: ‘Naked’ DS14DBL(H4) Also available: ‘Naked’ WR14DBDL(H4)
Hitachi’s brushless motors are designed to make maximum use of battery energy. They work up to 30% longer per charge than conventional models. It’s due to no energy loss through friction resistance, heat or sparking. This also provides a significant increase in power, providing a greater capacity to handle bigger workloads.
The brushless motors are also smaller in size making the tools more compact and lightweight.
Once they’re fully charged, they’re ready to work longer.
Scan this QR code to see a demonstration of Carbon Brush
vs Brushless Hitachi tools
C Series Finish Nailer NT65M2
• Fires 25 - 65mm C Series Finish Nails• Sequential & Bump Fire Trigger• Integrated Air Duster• Tool-less Depth Dial
C1 Series Finish Nailer NT50AE2
• Fires 15 - 50mm C1 Series Finish Nails• Sequential & Bump Fire Trigger• Tool-less Depth Dial
Also available: 15 - 32mm C1 Series Nailer NT32AE2
Narrow Crown Stapler N3804AB3
• Fires 13 - 38mm 6000 Series Narrow Crown Staples• Sequential & Bump Fire Trigger• Tool-less Depth Dial
10.8V Li-ion Range
Pneumatics
10.8V Impact Driver WH10DL
• 105Nm Tightening Torque• Lightweight At 0.9kg
10.8V Driver Drill DS10DFL
• 10mm Single Sleeve Keyless Chuck• Lightweight At 1.0kg• 2 Speed Gearbox With All Metal Gears
10.8V Mini Grinder GP10DL
• Compact, Slim, Soft Grip Body • Lightweight At 0.48kg• Anti-Start Safety Override When Replacing Batteries
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
10.8V Combination Pack PACK232
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 1.5Ah Li-ion Batteries with MPC, 42 Accessories, Charger and Carry Case
Mini Grinder Accessory Sets 753948 / 753949
• Both kits contain high quality 1/8” (3.2mm) shaft diameter bits which are compatible with the Hitachi GP10DL and the majority of competitor mini grinders
753949 – 397 Piece Mini Grinder Accessory Set753948 – 200 Piece Mini Grinder Accessory Set
188mm
210mm
208mm
139mm
204mm
Also available: ‘Naked’ DS10DFL(H4)
Also available: ‘Naked’ GP10DL(H4) Also available: ‘Naked’ WH10DL(H4)
Includes DS10DFL Driver Drill, GP10DL Mini Grinder, 42 Accessories, 2 x 1.5Ah Li-ion Batteries with MPC, Charger And Carry Case
• 550W Motor• 13mm Keyless Chuck• Reversible With Variable Speed
Also available: 16mm Impact Drill DV16VSS
16mm Impact Drill DV16V
• Heavy Duty 590W Motor• 13mm Metal & Plastic Keyless Chuck• Robust Aluminium Housing
BONUS
13mm Impact Drill DV13VSS
18mm Impact Drill DV18V
• 690W Motor• 13mm Keyless Chuck• Aluminium Housing • Variable Speed With Reverse
Drill With Safety Clutch D13VB3
• 790W Motor• 2 Speed Gearbox• 13mm Keyless Chuck • 40mm Wood Capacity• Variable Speed With Reverse
20mm Impact Drill DV20VB2
• 730W Motor • 2 Speed Gearbox • Variable Speed With Reverse• 13mm Keyed Chuck
1 x Site Bag
Drilling
6.5mm High Speed Drill D6SH
• 240W Motor• 6.5mm Keyed Chuck• High 4500rpm Speed• Compact & Lightweight
Hitachi’s Slide Compound Mitre Range encompasses the following features within its range:
• Linear ball bearing slide system for superior accuracy and control. • Positive stops on mitre and bevel scale, for easy to read measurements and quick settings. • High sub fences to support work piece for improved stability while cutting. • Splinter guard to prevent material from splintering increasing user safety. • High levels of dust collection to keep jobsite clean.• Quick Change Depth Adjustment Guide• Laser Marker, Digital Readout and LED Light (not featured on all tools).
Hitachi’s dual slide
system provides
accurate & increased
cutting capacity whilst
providing added safety
and portability
D Handle Jigsaw FCJ65V3
• 400W Motor• Variable Speed• Compact & Lightweight
185mm Circular Saw C7SB2-K
• 1710W Motor • Lightweight At 4.6kg• Aluminium Base With 60mm Depth Of Cut
Includes 2 x Blades and Carry Case
235mm Circular Saw C9SA2
• 2000W Motor • Lightweight At 6.8kg• Aluminium Base With 86mm Depth Of Cut
125mm Random Orbital Sander SV13YB
• 230W Motor• Lightweight At 1.4kg• High Dust Collection
Also available: 125mm Variable Speed Orbital Sander SV13YA
1/3 Sheet Orbital Sander FSV10SA
• Velcro Pad & Clamp System• Includes Punch Plate & Dust Bag• Lightweight At 1.3kg
Wood Work
305mm Slide Compound Saw with Laser C12RSH
• 1520W Motor• 107 x 312mm Cutting Capacity With Zero Clearance Slide Structure
Also available: 305mm Slide Compound Saw with Laser Marker and Digital Readout C12LSH
216mm Slide Compound Saw C8FSE
• 1050W Motor • 75 x 262mm Cutting Capacity With Positive Mitre Stops
Also available: 216mm Slide Compound Saw with Laser Marker & LED Light C8FSHE
255mm Compound Mitre Saw C10FCE2
• 1520W Motor • 89 x 101mm Cutting Capacity With Positive Mitre Stops
Also available: 255mm Compound Mitre Saw with Laser Marker C10FCH2
190mm Circular Saw C7MFA
Includes 2 x 40T Blades
• 1010W Motor • Lightweight At 3.4kg• Aluminium Base With 68mm Depth Of Cut
Also available: 165mm Circular Saw C6MFA
Hitachi's Powerful 125mm Angle Grinder
30mm 3 Mode Rotary Hammer DH30PC2
• 850W Motor With 5.4 Joules Impact• SDS Plus With 30mm Max. Drilling Capacity• Variable Speed
32KG Demolition Hammer H90SB
• 1650W Motor• 55 Joules Impact Energy• 28mm Hex. Drive
Hitachi's G13YF & G13VA Grinders
• 1430 Watts of Power
• Overload Protection
• Soft Start
• Constant Speed Control
• Kick Back Protection
• Zero Voltage Restart
• Anti Vibration Side Handle
• Tool-less Wheel Guard
16.5KG Demolition Hammer H65SB2
Includes 1 x Chisel, 1 x Point and Case
• 1400W Motor • 42 Joules Impact Energy• 30mm Hex Drive
NOW WITH NEW CASE!
40mm 2 Mode Rotary Hammer DH40MRY
• 950W Motor With 10 Joules Impact• SDS Max Chuck With 40mm Max Drilling Capacity • Variable Speed
• 620W Motor With 1.4 Joules Impact• SDS Plus Chuck With 22mm Max Drilling Capacity • Variable Speed With Reverse
• 800W Motor With 3.2 Joules Impact• SDS Plus Chuck With 24mm Max Drilling Capacity • Variable Speed With Reverse
Wood Work
BONUS
22mm 2 Mode Rotary Hammer DH22PG
1 x SDS Plus Bit Set
24mm 3 Mode Rotary Hammer DH24PC3
125mm Angle Grinder Pack G13SR3-BP
Pack Includes:730W Angle Grinder With 3 x Cutting Wheels, 1 x Grinding Wheel, 1 x Diamond Wheel, 1 x Tape Measure & Carry Case
Also available: 100mm Angle Grinder Pack G10SR3-BP
125mm Angle Grinder G13YF 125mm Angle Grinder G13SB3
• 1430W Motor• Soft Start, Constant Speed Control, Overload Protection, Kick Back Protection, 0 Voltage Restart• Tool-less Guard
• 1300W Motor • Anti Vibration Side Handle• Tool-less Guard
230mm Angle Grinder G23SE2
• 2400W Motor• Anti Vibration Handle• Tool-less Guard
125mm Variable Speed Angle Grinder G13VA
• 1430W Motor• Soft Start, Constant Speed Control, Overload Protection, Kick Back Protection, 0 Voltage Restart• Tool-less Guard
100mm Angle Grinder With Paddle Switch G10SQ
• 840W Motor• 196mm Ultra Slim Grip Circumference• Full Length Paddle Switch
180mm Angle Grinder G18SE3
• 2400W Motor• Anti Vibration Side Handle• Tool-less Guard
Metal Work
125mm Angle Grinder Cutting Pack G13SR3-CWP
Pack Includes:730W Angle Grinder With 10 x Cutting Wheels, 1 x Grinding Wheel, 1 x Tape Measure & Carry Case
Also available: 100mm Angle Grinder Cutting Pack G10SR3-CWP
Cut Off Machine & Angle Grinder Kit Pack 224
Pack Includes:• 2400W, 355mm Cut Off Machine• 730W, 100mm Angle Grinder With Bonus
NEW
DISCLAIMERPrices effective from the 01/01/2012 to 31/03/2012 unless stock is sold out. All prices include GST unless otherwise marked. Prices and products are current at the time of printing but are subject to change without notice. Prices in this catalogue are a guide only, prices may vary from store to store. Accessories not included unless otherwise stated. Illustrations are for display purpose only. Not all items shown in this brochure are held in stock by retailers at all times. Orders can be taken for product not held in stock at time of enquiry. Errors and Omissions Excepted (E&OE). Brochure prepared by Hitachi Power Tools Australia Pty Ltd ABN 27 072 677 153 for use by participating retailers. www.hitachi-powertools.com.au
To contact Hitachi scan this QR reader on your
mobile device
125mm Angle Grinder With Paddle Switch G13SQ
Drill Press B16RM
• 750W (1Hp) Motor With 16mm Chuck• Laser Guide For Pre-alignment Of Drilling• 12 Speed Belt Drive
• 840W Motor• 196mm Ultra Slim Grip Circumference• Full Length Paddle Switch
Reciprocating Saw Blade Pack 75204941 Piece Socket Set 752500Diamond Wheel Pack 797130
• Includes 12 Blades in a Roll Up Satchel• Assortment of Timber and Metal Applications
• Includes 10 Impact Sockets, 28 Hex. Driver Bits & 3 Adaptors
• Includes 3 x 105mm Wheels 1) Continuous Rim - Ideal for Porcelain Cutting 2) Segmented Rim - Ideal for Concrete Cutting 3) Turbo Rim - Ideal for All Purpose Fast Cutting
Find Us On Facebook
Accessories
NEW
38mm 2 Mode Rotary Hammer DH38MS
• 950W Motor With 9 Joules Impact• SDS Max Chuck With 38mm Max. Drilling Capacity• 12 Angle Chisel Position
NEW