Powerful service OEM solutions

2

For over 30 years

TEKO was founded in 1982 as a commercial agency for refrigeration components. Meanwhile we are distributor of various manufacturers. Close cooperation with the manufacturer as well as our knowledge, own ideas and practical experience to the products combine to our reliable line of refrigeration products.

The electronic control components and software solutions by Wurm Systeme in Remscheid are examples for this. They are mainly used in our system solutions for food retailers, food production and logistics centres.

We have used the compressors from our partner suppliers in TEKO machine units for over 20 years. This also applies to the valves and the oilstar®oil regulation system. The condensers and the evaporators of the TEKO series WHITELINE complete the coordinated package of refrigeration equipment.

An important business branch.Apart from the development of refrigeration systems and the construction of machine units, the delivery of components or special solutions for OEM customers has been an important aspect since the beginning of the company. Therefore, you can be sure that we will provide you with the service you need.

LARGE WAREHOUSEFAST DELIVERY

Our range at a glance

• CO2 condensing units – ROXSTAmicro

• Hermetic reciprocating / scroll compressors & condensing units – Embraco

• Semi-hermetic compressors & condensing units – Frascold

• Hermetic rotary compressors for CO2 and synthetic refrigerants – Panasonic

• Frequency converter for speed-regulated Panasonic-rotary compressors – Invertek

• Valves – GMC, Castel

• Heat transfer units – WHITELINE

• Control electronics – Wurm Systeme

• Oil regulation systems – oilstar®

NEW

NEW

NEW

3

Just-in-time

We offer our OEM customers “just-in-time”-delivery as an additional service. The just-in-time procedure saves you storage costs and means you don't tie up additional capital in material storage. We take care of this for you. We will of course always support you in any possible way; we check quantities of blanket purchase orders and deadlines in order to avoid shortages on your part.

SERVICE is very important to us

You order – we deliver immediately. With our optimized planning, large storage volume of 50,000 products on average and intensive customer contact, we offer you continuous and on-time delivery. Gladly Just-in-time.

Examples for use

• Refrigeration cabinets• Air conditioning units• Medical appliances• Ice machines• Compressed air dryers• Appliances for environmental

simulation• Laboratory appliances

4

Series production according to customer specifications

According to your particular customer specifications and together with you, we produce the right series solution which can be installed in your products for further use.

Our customers are already using such customised small series in different areas. From beverage refrigeration in vending machines, to grain drying installations or small refrigeration cells for food cooling boxes – there are copious options.

As a first step, we clarify your specifications: Cooling capacity, type of installation, spatial conditions, equipment, connections etc., then we design the series and promptly build a prototype. Once you have installed the aggregate successfully and given your approval, we produce the ordered amount. Here, we also offer you the option of just-in-time delivery. We usually conclude a framework agreement on a set amount of items. Then, you individually request product deliveries according to your order situation. An extension by “x” amount of time is possible as well as a project-specific agreement.

SERIAL PRODUCTIONACCORDING TO CUSTOMER SPECIFICATIONS

NEWROXSTAmicro

ROXSTAmicro is the small and compact CO2 box for direct connection with MT and LT plug & play units.

Air or water-cooled condensing unit• Air-cooled version for food retail, commercial

kitchens, cold rooms, ice making• Water-cooled version for combination with water

chillers, dry coolers

CompressorThe speed-controlled, two-stage rotary compressoroffers optimal adaptation to the cooling needs withthe lowest possible energy consumption.

Capacities(t0 MT -7 °C / t0 LT -30 °C / tGK 30 °C)

• MT 0.8...5.4 kW. 1 two-stage CO2 rotary compressor

• LT 0.3...2.5 kW. 1 two-stage CO2 rotary compressor

5

Series solution – Series production

We have created our own production area for the production of small series. With this small production line, the aggregates and small units can be installed, tubed and soldered completely at a work place and tested for pressure strength and tightness.

This guarantees a high level of production accuracy and therefore a high-quality product. The production philosophy developed by TEKO over decades is also applied to small series.

• Bent copper and stainless steel pipes• No hose connections• No fittings• Prefabricated assemblies • Precision tightness test with sensitive gas

detectors (a helium-nitrogen mixture detects leaks down to 1 gram per year)

The qualitative advantages are in our high quality

• High repeatability• No leakage • Longevity• Reliable components

If need be, we can react quickly and even provide fast delivery apart from set call orders.

Our service for you

• For your just-in-time production – storage at TEKO

• Delivery of your required batches• Compliance with delivery dates• Close communication• Fast reaction• We are here for you – not only within our usual

range of services

6

PARTNERSHIPSBETTER TOGETHER

Compressors

The compressors produced by our partner suppliers are used in the areas of commercial refrigeration, industrial refrigeration, logistics, refrigerated transports, air conditioning and heat pumps.

From hermetic compressors and condensing units for low output ranges (Watt) to reciprocating and screw compressors for medium to high output ranges (kW / MW), we provide an extensive compressor portfolio.

Together with the compressor manufacturers, we have already developed efficient technologies such as the finely stepped capacity control XLR which is now produced in series by Frascold.

Oil regulating system. oilstar®

Good oil supply is important for the longevity of your refrigeration unit. That is why we committed ourselves to developing oil components and supported the oilstar® line. We have been using oilstar products in our entire product range since 1999. From mufflers to oil and liquid separators, oil regulating systems and filter-driers - we also provide the whole range individually. The products distinguish themselves through their high quality. In the course of extensive quality assurance, the devices undergo 100% pressure strength and tightness testing.

Valves

The products from GMC and Castel have been used for a long time in TEKO machine units and they have repeatedly proven their quality. The companies provide high-quality valves, sight glasses, driers, filters, mufflers and connections for all kinds of uses.

7

Heat transfer units WHITELINE

To complement your refrigeration system in the

best way, we provide high-quality evaporators and condensers. In this line, we were able to use our know-how in the development and engineering of heat transfer product series.

Since 2014, we provide heat exchangers which meet the future demands of the refrigeration market such as the consequences of the F-Gas Regulation or the ErP Directive. We stock the optimized range of evaporators and condensers for you. Therefore, we can deliver quickly and guarantee fast availability.

For energy-saving operation, we offer condensers in the WVR series with EC fans and various types of evaporators with ESM motors.

Control electronics Wurm Systeme

Since 1985, we are an exclusive sales partner of Wurm Systeme and also integrate the control solutions in our units and concepts. Well-known supermarket chains and food companies often use Wurm technology together with our refrigeration and heat solutions. The suitable switchgear is produced by the subsidiary Wurm Schaltanlagenbau, which has been successful on the market for over 40 years. Of course, we also provide the hard- and software components individually.

Better together

Partnership is a vital part of our company culture. There is a reason why “Better together” is our mission statement. We can only make progress together, using each other’s strengths.

7

Wärmeübertrager. WHITELINE.

Zur optimalen Ergänzung Ihrer Kälteanlage bieten wir Ihnen hochwertige Verdampfer und Verflüssiger. Bei dieser Serie konnten wir das von uns erworbene Know-how in die Entwicklung und das Engineering der Wär-meübertragerserien einfließen lassen.

Seit 2014 erhalten Sie bei uns Wärmetauscher, die den künftigen Anforderungen des Kältemarktes, wie den Auswirkungen der F-Gase-Verordnung oder der ERP-Richtlinie gerecht werden. Das optimierte Ange-bot an Verdampfern und Verflüssigern haben wir für Sie an Lager liegen. Das bedeutet kurze Lieferzeiten und schnelle Verfügbarkeit.

Für den energiesparenden Betrieb erhalten Sie die Verflüssiger der Serie WVR mit EC-Ventilatoren, unter-schiedliche Verdamfpertypen mit ESM-Motoren.

Regelelektronik. Wurm Systeme.

Seit 1985 sind wir exklusiver Vertriebspartner für Wurm-Systeme und integrieren die Regellösungen auch in unsere Anlagen und Konzepte. Bekannte Super-marktketten und Lebensmittelunternehmen setzen auf die Wurm-Technologie oft in Verbindung mit unseren Kälte- und Wärmelösungen. Die passende Schaltanla-ge kommt vom Tochterunternehmen Wurm Schaltan-lagenbau, welches seit über 40 Jahren erfolgreich am Markt ist. Sie erhalten bei uns natürlich auch die Hard- und Softwarekomponenten einzeln.

Zusammen besser.

Partnerschaft ist ein wichtiger Bestandteil unserer Unter-nehmenskultur. Nicht umsonst lautet unser Leitspruch „Zusammen besser“. Denn nur gemeinsam können wir uns weiterentwickeln und die Stärken des jeweils anderen nutzen.

TEKO Refrigerationwww.teko-gmbh.com

Subject to modifications | Version E1 – 02/2020