VS VS
Do Not Publish
Cathode
Separator
Anode
Multi stacked layers of mono-cell
X-ray Image
One continuous sheet
X-ray Image
Lamination & Stacking Conventional Winding
Financially Strong $24B profitable company, developing and manufacturing lithium technologies for >23 years
Long standing, financially stable company capable of supporting 10 year product warranties
66% revenues from Basic Materials & Chemical business, not battery business
Manufacturing capabilitiesOperating global cell manufacturing with production capacities > 65GWh by 2020
Successfully suppling quality li-ion cells to the world’s leading automotive EV manufacturers
~700k EVs with zero safety infractions
Company with a chemical background (you want this of your battery manufacturer)
Experience in multiple lithium chemistries, battery formats and applications ranging
from handheld devices to EVs
LG Chem is not an integratordeveloping their own cell materials, using cell technologies based on their own IP
RESU13
Scalable capacities, 3.3kWh – 13.1kWh
Multiple inverter compatibilities*
High & low voltage options are available
Indoor and outdoor installation
Aesthetic, compact design, industries highest energy density
Wall or floor mounted**
International safety certifications
Why LG Chem ?
*please visit lgesspartner.com for complete list
**varies by model
< >
Manual Lift Lifting Handles – Sold Separately
Category RESU10H
Electrical
Characteristics
Total Energy 9.8 kWh
Usable Energy1) 9.3 kWh
Inverter Interface Voltage RangeCharge 400 ~ 450VDC
Discharge 350 ~ 430VDC
Charge/Discharge CurrentContinuous 11.9A@420V / 14.3A@350V
Peak discharge 18.9A@370V for 10 sec.
Max. Charge/Discharge Power2) 5kW
Peak Power (only discharge)3) 7kW for 10 sec.
Communication Interface RS485
DC Disconnect Circuit Breaker, 25A, 600V rating
Mechanical
Characteristics
Dimension (W x H x D) 29.3’’ X 35.7’’ X 8.1’’
Weight 214 lbs
Operating
Conditions
Installation Location Indoor / Outdoor (Wall-Mounted)
Operating Temperature 14 ~ 113°F (-10 ~ 45°C)
Operating Temperature (Recommended) 59 ~ 86°F (15 ~ 30°C)
Storage Temperature4) -22 ~ 131°F (-30 ~ 55°C)
Cooling Strategy Natural Convection
Reliability/
Certification
SafetyCell UL1642
Battery Pack TUV (IEC 62619) / CE / UL1973
Hazardous Materials Classification Class 9
Transportation UN38.3 (UNDOT)
Ingress Rating IP55
※ Test Conditions - Temperature 25°C, at the beginning of life
※ Total Energy is measured under specific condition from LGC(0.3CCCV/0.3CC)
1) Value for Battery Cell Only (Depth of Discharge 95%), 2kW charge/discharge power.
2) LG Chem recommends 3.3kW for maximum battery lifetime
3) Peak Current excludes repeated short duration (less than 10 sec. of current pattern)
4) Commissioning RESU should be within 180 of manufacturing date; RESU will be
shipped with up to 30% SOC
Do Not Publish
Light & Compact Design
Easy for installation with
world best energy density
Requisite certifications
supported
Wall mounting installation
IP55 (NEMA 3R) supporting
outdoor installation
Maximum power of 5kW
(RESU10H)
High efficiency
in its product’s heat dissipation
If you are not going to
commission the battery the
same day that you install it, you
need to turn off the circuit
breaker and then the
auxiliary switch!
Do Not Publish
for SolarEdge for SMA
Violation of NEC code if
clear cover is missing or
damaged
Do Not Publish
Very Important!!
Do Not Publish
Suppress latch release buttonsOpen door 2-10°, then pull
away from chassis
Turn off the circuit breaker and
then turn off the auxiliary switch
Replace wiring box cover, close
latches and contact customer
support 1-888-375-8044
Installation Location
No flammable or explosives nearby
Ambient temperature 14~113℉ (-10~45℃)
Wall must be able to support battery weight
Access Door
>12“ recommended clearance for proper ventilation and installer convenience
Hardware Recommendationsdiameter: 10mm (0.4”) min.length: 70mm (2.8”) min.material: stainless steel (8.81T)
(4)
(4) (2)
(2)
* (n) denotes recommended number of fasteners
* min. clearance of 250mm (10”) between fasteners
Do Not Publish
24”
12”
12”12”
1) Preparation
Before Mounting
2) Unpacking
Location
- Wall stability
- Clearance
- Environmental considerations
(no direct sunlight & rain/snow)
- No flammables or explosives nearby
Personal Safety
- Wear protective gear (PPE)
- Battery Pack
- Manual
- W/M Bracket
- Screws (2ea)
Proper Fixation
3) W/M Bracket Installation
- Use minimum 12 screws for
W/M bracket fixation
- Check minimum screws
numbers for each zone
Check s/n
- Battery age
- Battery type
- Keep pkg materials
12”12”
12”
24”
SolarEdge/RESU10H Post Installation Checklist
Strongly recommended to exhaust all inverter troubleshooting before resorting to the battery.
Latest SolarEdge Firmware Updates
SolarEdge Firmware Update Instructions Firmware Update by SDS/MicroSD Card
* Please check for latest firmware versions *
Strongly recommended to exhaust all inverter troubleshooting before resorting to the battery.
RESU10H Fault ID ChecklistRESU10H Type R Installation Manual
Do Not Publish
The s/n label is located behind the
access door.
Take a photo of the s/n label.
Mfr Date: yy/mm/dd format
DLT 1 = RESU10H Type C (SMA battery)
SEG 1 = Primary RESU10H (SolarEdge)
SEG 2 = Secondary RESU10H (SolarEdge)
Authorized RESU Distributors………….Only purchase RESU from an Authorized RESU Supplier!!*you need to be certified to purchase and install RESU
RESU Resource Page……………………………...........…… for RESU updates and RESU related materialshttps://mailchi.mp/830aaacb3c75/lgchem_ess_northamerica
Company and RESU Registrations………….......................................... take picture of serial numberwww.lgesspartner.com
RESU Installation Certification Test………..…...……............... 100% to pass, enter email correctlyhttps://www.surveymonkey.com/r/LGC_RESU10H
CA SGIP Incentives..………………….……………… Current applications an be swapped with RESU10H
Save your packaging materials!
Save this number in your phone
This is important!
Get this email!
1. Get RMA # 2. Call distributor to ship back3. Get email from distributor