55
CS 2100 & CS 2200 Our Next Generation Intraoral X-ray Systems Public © Carestream Health, 2014
CS 2100 & CS 2200
Our Next Generation Intraoral X-ray Systems
Public © Carestream Health, 2014
CS 2100 & CS 2200
• Product introduction
• Product enhancements
• CS 2100
• CS 2200
• Irix mounting configuration
• Options and accessories
p.2
Public © Carestream Health, 2014
CS 2100 & CS 2200
Next Generation CS 2100
• Affordable, high frequency technology
• Designed for dental professionals seeking ease of use and reliability
• Provides high quality results for accurate and safe diagnostics.
• Flexible and smart design helps meet the needs of almost any practice
CS 2100 & CS 2200
Next Generation CS 2200
• Improved design for added durability and reliability
• Designed with safety, comfort and efficiency in mind
• High frequency generator supports superior image quality and better safety conditions for your patients and staff
• Features an intuitive timer
CS 2100 & CS 2200
Next Generation CS 2200
• Timer interface improves the user-friendliness and the reliability
• Complies with modern quality control and Euratom directives
– Regarding failsafe procedures
– Emitted dose display for better patient dose tracking
• Interface is very intuitive and easy-to-use.
• Makes exposure setting failsafe and helps avoid retakes – User friendly and intuitive interface
– Simplification of the exposure setting process
– Clear displays, allowing easier reading even from distant location
• Timer includes a complete diagnostic tool for easier servicing by technicians, which helps improve uptime
What is the role of the CS 2100 and CS 2200?
• Intraoral generators are a key component of Carestream Dental Systems total intraoral solution, which includes:
– X-ray tube manufacturing
– Image capture technology
– Imaging software
• Intraoral products are designed to work together seamlessly
CS 2100 & CS 2200
PRODUCT ENHANCEMENTS CS 2100 & CS 2200
p.7
Public © Carestream Health, 2014
Reliability is Our Key Goal
GOAL:
To work to continuously improve the reliability of our
CS 2100 and CS 2200 Intraoral X-Ray Systems
We have implemented the following changes:
• Modified the manufacturing process to improve product quality
• Improved the materials used in manufacturing
• Changed the product design to improve reliability
• Introduced new system components used in manufacturing
• Improved the testing process for each unit, both during manufacturing and upon completion
• Simplified the installation process via product enhancement and a Quick Start Guide
p.8
Public © Carestream Health, 2014
Improvements to Generator Head
p.9
© Carestream Health, 2014
New cable wiring and welding
process
Wire protection
New fork
cover
Improved Electronic
Board
100% Test of Tank Lid
100% Test of
Connector
New design New material
E13 cut HTR power
E14 HT internal sparking
External wire cut at connector
Oil leakage
New start up procedure and
Quick User Guide
ERROR CODES
Improvements to Wall Mount and Arm
p.10
© Carestream Health, 2014
Inversed mount
New bolts for
electronic board protection
Pre-wired clip-on connectors
Insulation plate
Electronic board damaged at installation
Easier installation
Simplified installation software
Pre-wired clip-on connectors incl
2100 New brake material
Pre-wired clip-on connectors
Cable sheath
Modified fixation holes
ERROR CODES
Additional Product Improvements
• 100% unit testing has been implemented
–Additional tests of the connector and tank lid will also be performed during manufacturing
–Each unit will be tested after full assembly
• Packaging has been adapted
–Packaging now includes handles for easier movement
–Package can be placed flat on long edge or stood upright
• A Quick Start Installation Guide
–Reminds and guides users through restarting procedure
–Addresses seasoning needs
• Manuals have been updated
–Reflect changes to the products
–Facilitate maintenance, diagnostics and parts replacement
p.11
© Carestream Health, 2014
New updated packaging showing redesigned handles
CS 2100 Introducing the Next Generation
Benefits
• Affordable, yet feature-rich intraoral imaging
• DC technology (Very High Frequency), replacing AC technology
–Dose reduction (up to 30%) thanks to the VHF
–Better control of exposure parameters: reproducibility and consistency
• Extremely simple to use
• User-friendly exposure time selection button
• Dose display after each exposure
• Ergonomic design
• Full range of options and accessories that maximise the overall flexibility of the unit
• Improved servicing
Timer
Unique, easy to use timer with multiple functions:
• Timer
– Manual time setting
– Film / Digital mode
• Emitted dose display
• User Menu
– Settings customization
– Tube seasoning
• Technical Menus
– Interface with firmware
– 2 counters for exposures
– Up to 59 management error codes
– Calibrated generator parameters
Installation Layouts
Left orientation Right orientation Vertical orientation
Configurations STANDARD CONFIGURATION
Standard 2-wire cable
Remote timer. Can be located anywhere from close to the unit to outside of the operating room
Timer can also be mounted on the wall-framework (fixing kit and link cable supplied in std configuration).
A reliable and ergonomic designed exposure button to trigger each exposures.
OPTIONAL CONFIGURATION (with additional Cat 5154307 accessory)
3 over-twinned pairs + 1 shield cable
Why 60 kV DC ?
More penetrating x-ray beam is consecutive to a technology change from AC to DC (VHF). Consequently, to match radiographic contrast obtained with Irix 70kV AC , beam energy has to be reduced down from 70 to 60kV DC.
DC-VHF
AC
kV 70 kV - AC
70 kV - DC
60 kV - DC
70 kV - AC
70 kV - DC
60 kV - DC
X-ray energy levels
Dis
trib
utio
n Resulting radiographic contrast
Reduction of soft radiations (low energies)
70 kV AC vs 60 kV DC
18
Technical Specifications MEASUREMENT VALUE
Tube Voltage 60 kV
Tube Current 7 mA
Frequency 300 kHz Very High Frequency
Tube Focal Spot 0.7 mm CEI
Total Filtration 2.5 mm eq. AI
Input Voltage 230-240 V – 50/60 Hz
Weight ~ 18 kg - ~ 40 lbs
3 arm lengths available: Short (170 cm / 67 in.); Standard (188 cm / 74 in.); Long (205 cm / 81 in.)
Accessories: Mobile stand Floor mounting column Rectangular collimators (size A, B and C), ….
Mounting options: Standard wall mount Ceiling mount
Dimensions
514 mm
214
mm
1007
mm
819
mm
2072
mm
39-5
/8in
.
20-1/4in.
B
47-1
/4in
.
80 mm
1200
mm
3-1/8in.R
C
32-1
/4in
.8-
7/16
in.
A
81-9
/16i
n.
N :
1.9 mm
Al
par arrete du :
Filt tot :HT : 70 kVTUBE N :
TYPE HOM
OLO
GUE s
o
o
oTYPE :
81-1
/2in
.20
72 m
m
47-1
/4in
.12
00 m
m
R
16-5
/16i
n.41
5 m
m
39-5
/8in
.10
07 m
m
300°
63in
.16
00 m
m
1-3/4in.44 mm
B
A
12-1/4in.310 mm
11-15/16in.303 mm
20
Cat Numbers There are 5 Cat Numbers for 230 V systems
Cat Number Description
5153671 CS 2100 230V / 170 cm Short Wall Mount
5153663 CS 2100 230V / 188 cm Standard Wall Mount
5153655 CS 2100 230V / 205 cm Long Wall Mount
5154349 CS 2100 230V / Ceiling Mount
5155304 CS 2100 230V / Ceiling Mount Faro
21
Cat Numbers There are 4 Cat Numbers for 110 V systems
Cat Number Description
5153648 CS 2100 110V / 170 cm Short Wall Mount
5153630 CS 2100 110V / 188 cm Standard Wall Mount
5153622 CS 2100 110V / 205 cm Long Wall Mount
5154356 CS 2100 110V / Ceiling Mount
CS 2200 Introducing the Next Generation
Benefits
• Choice between 60 or 70 kV for high contrast or high latitude images
• DC technology (Very High Frequency technology)
–Dose reduction (up to 30%) thanks to the VHF
–Better control of exposure parameters: reproducibility and consistency
• One level of mA (7 mA): simplification, shorter exposure times, failsafe, reduction of motion blur
• Hand-held timer for freedom of movement in the practice
• Easy-to-use, intuitive and failsafe timer
• Simplified and mistake-proof setting of exposure parameters
• Dose display after each exposure
• Full range of options and accessories that maximise the overall flexibility of the unit
• Improved servicing
Timer
Multiple user functions:
• Exposure settings
– 60 / 70 kV
– 3 patient sizes: child / adult / large patient
– 3 pre-set modes: phosphor plate/digital/film
– 1 manual mode timer
– 1 intuitive tooth selection wheel:
– incisor / premolar / molar - maxillary or mandibular – Bite-wing anterior / posterior - Occlusal
• Emitted dose display
Timer
Multiple service functions:
• User Menu
– Settings adjustments
– Tube seasoning
• Technical Menus
– Interface with firmware
– 2 counters for exposures
– Up to 59 management error codes
– Calibrated generator parameters
Installation Layouts
Left orientation Right orientation Vertical orientation
Configurations STANDARD CONFIGURATION
3 over-twinned pairs + 1 shield cable included in the accessory
Timer can also be mounted remotely on the wall.
OPTIONAL CONFIGURATION (with additional Cat 5159678 accessory)
Timer is fixed on the wall apply with a back magnetic plate.
60kV and 70kV DC
• Selecting 60 or 70 kV will adjust the contrast (gray shade) levels of the radiographic image
• Provides the dentist freedom of choice according to the type of examination (periodontics, endodontics), diagnostic standards, and the morphology of the patient
• 60 kV will provide radiographs with high contrast
• 70 kV will provide radiographs with high latitude, and with additional dose reduction
70 kV - DC
60 kV - DC
Resulting radiographic contrast
29
Technical Specifications MEASUREMENT VALUE
Tube Voltage 60 kV – 70 kV
Tube Current 7 mA
Frequency 300 kHz Very High Frequency
Tube Focal Spot 0.7 mm CEI
Total Filtration 2.5 mm eq. AI
Input Voltage 230-240 V – 50/60 Hz
Weight ~ 18 kg - ~ 40 lbs
3 arm lengths available: Short (170 cm / 67 in.); Standard (188 cm / 74 in.); Long (205 cm / 81 in.)
Accessories: Mobile stand Floor mounting column Rectangular collimators (size A, B and C), ….
Mounting options: Standard wall mount Ceiling mount
Dimensions
31
Cat Numbers There are 5 Cat Numbers for 230 V Systems
Cat Number Description
5153580 CS 2200 230V / 170 cm Short Wall Mount
5153572 CS 2200 230V / 188 cm Standard Wall Mount
5153564 CS 2200 230V / 205 cm Long Wall Mount
5154331 CS 2200 230V / Ceiling Mount
5155288 CS 2200 230V / Ceiling Mount Faro
32
Cat Numbers There are 4 Cat Numbers for 110 V Systems
Cat Number Description
5153614 CS 2200 110V / 170 cm Short Wall Mount
5153606 CS 2200 110V / 188 cm Standard Wall Mount
5153598 CS 2200 110V / 205 cm Long Wall Mount
5154323 CS 2200 110V / Ceiling Mount
CS 2200
IRIX Mounting Configuration
Benefits
• Use of Trophy Irix anchorage points (and Gendex Oralix AC)
• No impact to existing practice environment
• Simplified installation
• DC technology (Very High Frequency technology) –Dose reduction (up to 30%) thanks to the VHF –Better control of exposure parameters: reproducibility and consistency
• Choice between 60 or 70 kV for high contrast or high latitude images
• One level of mA (7 mA): simplification, shorter exposure times, failsafe
• New easy-to-use, intuitive and failsafe interface
• Simplified and mistake-proof setting of exposure parameters
• Dose display after each exposure
• Improved servicing
Wall Mount Compatibility
Left or right orientations are possible to suite the practice environment
Anchorage points of Irix base
35
Anchorage points of Oralix AC base
Gendex Oralix AC
Trophy Irix
Irix Replacement: EASY and Fast
The former Irix unit can be replaced in less than 1 hour, using the same anchorage points and cables (power supply, exposure switch command).
There is no additional work required to redecorate the area after installation.
User’s Interface
Multiple user functions:
• Exposure settings
–60 / 70 kV
–3 patient sizes: child / adult / large patient
–3 pre-set modes: phosphor plate/digital/film
–1 manual mode timer
–1 intuitive tooth selection wheel:
– incisor / premolar / molar - maxillary or mandibular – Bite-wing, anterior / posterior, occlusal
• Emitted dose display
X-ray activation by existing switch
or supplied exposure button
User’s Interface
Multiple service functions:
• Anterior / posterior - Occlusal
• Emitted dose display
• User Menu
–Settings adjustments
–Tube seasoning
• Technical Menus
–Interface with firmware
–2 counters for exposures
–Up to 59 management error codes
–Calibrated generator parameters X-ray activation by existing switch
or supplied exposure button
Installation Layouts
Left orientation Right orientation
Configuration
X-rays are activated by a separate exposure switch.
User’s interface is attached on the wall apply. Standard 2-wire cable
41
Technical Specifications MEASUREMENT VALUE
Tube Voltage 60 kV – 70 kV
Tube Current 7 mA
Frequency 300 kHz Very High Frequency
Tube Focal Spot 0.7 mm CEI
Total Filtration 2.5 mm eq. AI
Input Voltage 230-240 V – 50/60 Hz
Weight ~ 18 kg - ~ 40 lbs
3 arm lengths available: Short (170 cm / 67 in.); Standard (188 cm / 74 in.); Long (205 cm / 81 in.)
Accessories: Rectangular collimators (size A, B and C), ….
Mounting options: wall mount
Dimensions
43
Cat Numbers There are 3 Cat Numbers (only available 230 V )
Cat Number Description
5159652 CS 2200 230V / 170 cm Short Wall Mount / Irix Mounting Configuration
5159645 CS 2200 230V / 188 cm Standard Wall Mount / Irix Mounting Configuration
5159660 CS 2200 230V / 205 cm Long Wall Mount / Irix Mounting Configuration
ACCESSORIES & OPTIONS
CS Intraoral X-ray Systems
3 Extension Arms
Extension arms available for CS2100 & CS 2200 :
Extension arm of 470 mm (18.50’’) – short 170 cm span
Extension arm of 648 mm (25.5’’) – standard 188 cm span
Extension arm of 850 mm (32.5’’) – long 205 cm span
Ceiling Mount (available for 110V & 230 V)
Ceiling Mount Faro (only available for 230 V)
Cat 5155825: Standard grip for adapting a lamp on the ceiling column
Faro Grip for adapting a Faro lightning system on the ceiling column (included in package)
Ceiling Mount
Mounting Configurations
• These mounting options are usable with both CS 2100 & CS 2200, but can only be associated with the standard wall-mounting configurations
• They are not compatible with the CS 2200 / Irix Mounting Configuration
Mounting Options
•Mobile base •Floor column stand •Counter plate •Metal plate for pass-through configuration •Irix wall mask apply
Mounting Options – Mobile base
Mobile base Cat 5154281
Must be combined together with either CS 2100 or CS 2200 / Standard wall-mounting configuration.
CE and C-UL Certified for highest safety
CS 2100 Mobile Unit
CS 2200 Mobile Unit
Mounting Options – Floor Column Stand
CS 2100 Floor Mounting Column Unit
CS 2200 Floor Mounting Column Unit
Floor column stand Cat 5154273
Must be combined together with either CS 2100 or CS 2200 / Standard wall-mounting configuration.
CE and C-UL Certified for highest safety
Installation plates
Counter plate for standard wall-mounted configurations Cat 5154265
Metal plate for pass-through configuration (US&C mainly) Cat 5188305
Irix wall mask apply Cat 5156369 (in case of horizontal layout)
Accessories for the intraoral product range
• X-ray exposure switch - Cat 5154307
(it is compulsory when mounting the CS 2100 with the timer on the wall-apply cover)
• Separate timer box for CS 2200 - Cat 5159678 (*)
(it is compulsory to mount the CS 2200 with the timer on the wall)
• Square collimator size C (delivered with the unit) for sizes 1 & 2 film/plate and size 2 sensor
• Square collimators size A and B for other smaller sized sensors and/or films/plates
(*) note: for former Trophy Elitys, Kodak 2000 or Kodak 2200 (with 4 and 7 mA), use Cat
5154315
List of Cat Numbers for Collimators
• Collimators fit the size of imaging receptor to limit patient dose by limiting the surface exposed to radiations.
• Labeled A, B and C to avoid confusions between film/plate sizes (ISO 3665 – sizes 0, 1, 2, 3 & 4) and sensor sizes (internal – sizes 0, 1 & 2
5154232 Collimator - size A - 19 x 24 mm
5154240 Collimator - size B - 23 x 35 mm
5154257 Collimator - size C - 31 x 39 mm
COLLIMATOR TYPE
Format (mm) For use with digital sensor For use with film or CR
A 19 x 24 Size 0
B 23 x 35 Size 1 Size 0 22 x 35
C 31 x 39 Size 2 Size 1 24 x 40 Size 2 31 x 41
Standard cone 60 mm diameter Size 3 27 x 54 Size 4 57 x 76
