Date post: | 04-Jun-2018 |
Category: |
Documents |
Upload: | rohaibi-abu-bakar |
View: | 256 times |
Download: | 2 times |
of 23
8/14/2019 P.P CNC LATHE
1/23
8/14/2019 P.P CNC LATHE
2/23
DIFFERENCE BETWEENCONVENTIONAL & CNC MACHINE
Spindlehead
Main
motor
Saddle
Hand- wheels
Controlshaft
Feedshaft
Leadscrew
HeadstockGearing
8/14/2019 P.P CNC LATHE
3/23
DIFFERENCE BETWEENCONVENTIONAL & CNC
MACHINEAngular position
transducerSingle Axis
Drive X
Single Axis
Drive Z
Main Drive
Resolver Z Axis
Measuring system
Resolver X AxisMeasuring system
Spherical thread
8/14/2019 P.P CNC LATHE
4/23
JENIS-JENIS CONTROLLER.
1. FANUC.
2. OKUMA.
3. MITSUBISHI.
4. SIMEN.
5. HASS.
8/14/2019 P.P CNC LATHE
5/23
PRODUCT MAKE FROM CNC
8/14/2019 P.P CNC LATHE
6/23
AUTOMOTIVE INDUSTRY
8/14/2019 P.P CNC LATHE
7/23
PART-PART OF MACHINE.
8/14/2019 P.P CNC LATHE
8/23
VARIOUS TYPES OF TURNING
TOOLS
8/14/2019 P.P CNC LATHE
9/23
8/14/2019 P.P CNC LATHE
10/23
8/14/2019 P.P CNC LATHE
11/23
TYPICAL TURNING TOOL.
8/14/2019 P.P CNC LATHE
12/23
TURNING CENTER CUTTER.
Types of cutters used on CNC turning centers:-
1. Carbides (and other hard materials) insert turning
and boring tools2. Ceramics
3. High Speed Steel (HSS) drills and taps
8/14/2019 P.P CNC LATHE
13/23
STANDARD INSERT SHAPE. V used for profiling, weakest
insert, 2 edges per side. D somewhat stronger, used for
profiling when the angle allowsit, 2 edges per side.
T commonly used for turningbecause it has 3 edges per side.
C popular insert because thesame holder can be used forturning and facing. 2 edges perside.
W newest shape. Can turn andface like the C, but 3 edges per
side. S Very strong, but mostly usedfor chamfering because it wontcut a square shoulder. 4 edgesper side.
R strongest insert but leastcommonly used.
8/14/2019 P.P CNC LATHE
14/23
8/14/2019 P.P CNC LATHE
15/23
CHUCK The unit to set/dismount a
workpiece is called the chuck,and in general, the chuck withthree soft jaws is used. Thejaws work together with thechuck unit and can beautomatically opened/closedby the foot switch.
Chuck jaw foot switch
This switch is to open andclose the jaws of the chuckhydraulically.
8/14/2019 P.P CNC LATHE
16/23
TAILSTOCK
This is the table to hold the workpiece with longprojection with the tailstock spindle at its center.The tailstock spindle is hydraulically driven and is
moved front and rear by the foot switch
8/14/2019 P.P CNC LATHE
17/23
BED & TOOL SLIDE/TURRET
the tableis to supportthe spindle head,carriage, and tool slide.
the tool slideis to which
tools are set Fig. shows the drum
type tool slide. Twelvetools can be set to thistool slide, and any tool
can be indexed by thetool slide indexingmechanism.
8/14/2019 P.P CNC LATHE
18/23
ON/OFF SWITCH Power source ON/OFF
switch This pushbutton
switch is to put on andoff the power sourcefor the lathe and NCunit.
CRT control panel This control panelconsists of the CRTdisplay, functionselection keys,numeric value keys,
etc. and is used toperform control suchas the selection offunctions of the NCunit andregistration/edition ofprograms.
8/14/2019 P.P CNC LATHE
19/23
CRT CONTROL PANEL & MACHINE
CONTROL PANEL CRT controlpanel consists ofthe CRT display, function
selection keys, numeric valuekeys, etc. and is used toperform control such as theselection of functions of theNC unit and
registration/edition ofprograms.Machine control panel This control panel consists of
various function selectionswitches of machineoperations, the manual dials,
etc. and is used to selectmachine functions inprogrammed operation andto perform manualoperation.
8/14/2019 P.P CNC LATHE
20/23
HYDRAULIC POWER UNIT
This unit is a hydraulic power source for indexingtools in the tool slide, opening/closing the chuckautomatically, moving the tailstock spindle, etc.
8/14/2019 P.P CNC LATHE
21/23
COOLANT.
Penentuan penggunaan coolant:-
1. Kelajuan mesin.
2. Jenis mata alat.
3. Jenis mesin.
4. Jenis benda kerja.
8/14/2019 P.P CNC LATHE
22/23
COOLANT.
Kesan tidak menggunakan coolant:-
1. Tatal (cip) melekat pada mata alat(insert).
2. Mata alat(insert) mudah tumpul.3. Geseran bertambah.
8/14/2019 P.P CNC LATHE
23/23
STATION NUMBERS