thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

CATEGORY 1 HITCHES

PPI-106M Base Hitch• Vertical mounting hitch• Draft load 7,800 lbf pull on bottom tongue

PPI-126VR Base Hitch• Vertical mounting hitch• Vertical load 1000 lbf• Draft load 29,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 64 HP

PP12XL Base Hitch• Austempered hitch• Vertical mounting hitch• Vertical load 1,600 lbf• Draft load 45,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 64 HP

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 2 HITCHES

PPI-201VH Base Hitch• Vertical mounting hitch• Vertical load 4,000 lbf• Draft load 56,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 154 HP• Also available with 3-sided heat treatment - PPI-201V3

PPI-201VH Perfect Hitch Option

Clevis Options• PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,000 lbf pull on bottom tongue• WB90 (Grade 8 Bolt)• WB91 (Nut)

• PPI-202V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB85 (Grade 5 Bolt)

208 Clevis

206 Clevis

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 3 HITCHES

PPI-237VR Base Hitch• Vertical mounting hitch• Vertical load 4,700 lbf• Draft load 60,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 248 HP

PPI-237VR Perfect Hitch Option

PPI-237VR Clevis Options• PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,000 lbf pull on bottom tongue• WB90 (Grade 8 Bolt)• WB91 (Nut)

• PPI-202V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

208 Clevis206 Clevis

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 3 HITCHES

PPI-301VH & PPI-301V3 Base Hitch• Vertical mounting hitch• Vertical load 5,000 lbf• Draft load 68,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 248 HP

Clevis Options• PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,360 lbf pull on bottom tongue• WB90 (Grade 8 Bolt)• WB91 (Nut)

208 Clevis

206 Clevis

• PPI-302V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

PPI-301VH & PPI-301V3 Perfect Hitch Option

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 3 HITCHES

PPI-321CTD3 Base Hitch• Vertical mounting hitch• Vertical load 6,000 lbf• Draft load 70,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 248 HP

PPI-331VH Base Hitch• Vertical mounting hitch• Vertical load 5,500 lbf• Draft load 70,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 248 HP

PPI-331VH Perfect Hitch Option

Clevis Options• PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,000 lbf pull on bottom tongue• WB82 (Grade 8 Bolt)• WB91 (Nut)

• PPI-302V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

208 Clevis

206 Clevis

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 3 HITCHES

PP23XL Base Hitch• Austempered hitch• Vertical mounting hitch• Vertical load 7,000 lbs.• Draft load 85,000 lbs.• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 248 HP

Clevis Options

208 Clevis206 Clevis

PP23XL Perfect Hitch Option

• PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,000 lbf pull on bottom tongue• WB90 (Grade 8 Bolt)• WB91 (Nut)

• PPI-202V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 3 HITCHES

PP30XL Base Hitch

Clevis Options

208 Clevis206 Clevis

PP30XL Perfect Hitch Option

• PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,360 lbf pull on bottom tongue• WB90 (Grade 8 Bolt)• WB91 (Nut)

• PPI-302V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

• Austempered hitch• Vertical mounting hitch• Vertical load 7,200 lbs.• Draft load 87,000 lbs.• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 248 HP

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 3 HITCHES

PP33XL Base Hitch

PP33XL Perfect Hitch Option

Clevis Options

208 Clevis

206 Clevis

• PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,000 lbf pull on bottom tongue• WB82 (Grade 8 Bolt)• WB91 (Nut)

• PPI-302V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

• Austempered hitch• Vertical mounting hitch• Vertical load 8,000 lbf• Draft load 91,000 lbf• Maximum drawpin size 1.5” for 40° of roll & pitch articulation• Up to 248 HP

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 4 HITCHES

PPI-401V3 Base Hitch• Vertical mounting hitch• Vertical load 7,500 lbf• Draft load 106,000 lbf• Maximum drawpin size 2.0” for 40° of roll & pitch articulation• Up to 402 HP

PPI-401V3 Perfect Hitch Option

Clevis Options• Clevis on cat. 4 hitch for transport use only! • PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,000 lbf pull on bottom tongue• WB82 (Grade 8 Bolt)• WB91 (Nut)

• PPI-302V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

208 Clevis

206 Clevis

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 4 HITCHES

PP40XL Base Hitch

PP40XL Perfect Hitch Option

Clevis Options

PPI-421V3 Base Hitch• Vertical mounting hitch• Vertical load 8,000 lbf• Draft load 106,000 lbf• Maximum drawpin size 2.0” for 40° of roll & pitch articulation• Up to 402 HP

• Clevis on Category 4 hitch for transport use only! • PPI-206VR (Clevis - 1” drawpin size) • PPI-207V (Clevis - 1.375” drawpin size) • PPI-208VR (Clevis - 1.25” x 1.75” slotted hole) • 15,000 lbf pull on bottom tongue• WB82 (Grade 8 Bolt)• WB91 (Nut)

• PPI-302V (Top Plate)• PPI-203VR (V-Block)• PPI-205H (Neoprene Cushions)• WB83 (Grade 5 Bolt)

• Austempered hitch• Vertical mounting hitch• Vertical load 9,000 lbf• Draft load 110,000 lbf• Maximum drawpin size 2.0” for 40° of roll & pitch articulation• Up to 402 HP

208 Clevis

206 Clevis

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 4 HITCHES

PP42XL Base Hitch

PP41RO Base Hitch

• Austempered hitch• Vertical mounting hitch• Vertical load 9,500 lbf• Draft load 112,000 lbf• Maximum drawpin size 2.0” for 30° of roll & pitch articulation• Up to 402 HP

• Vertical mounting hitch• Vertical load 9,000 lbf• Draft load 110,000 lbf• Maximum drawpin size 2.0” for 40° of roll & pitch articulation• Up to 402 HP

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

CATEGORY 5 HITCHES

PP52XL Base Hitch

PP52XLA Perfect Hitch Option

PP53XL Base Hitch

PP53XLA Perfect Hitch Option

• Austempered hitch• Vertical mounting hitch• Vertical load 14,000 lbf• Draft load 155,000 lbf• Maximum drawpin size 2.75” for 30° of roll & pitch articulation• Up to 670 HP

• Austempered hitch• Vertical mounting hitch• Vertical load 12,000 lbf• Draft load 130,000 lbf• Maximum drawpin size 2.75” for 30° of roll & pitch articulation• Up to 670 HP

• AP5XLP - Adjustment Plate (.500” thk - plated)• FA227 - Carriage Bolt (.750-10UNC x 4.5” lg)• PMI-136 - Compression Spring (1.05” OD x .125” wire)• WA65 - Washer (.812” ID x 1.5” OD x .125” thk)• WB91 - Lock Nut (.750-10UNC Steel hex Grade 8)

• AP4-5P - Adjustment Plate (.375” thk - plated)• FA228 - Carriage Bolt (.625-11UNC x 4” lg)• PMI-136 - Compression Spring (1.05” OD x .125” wire)• WA28 - Washer (1.312” OD x .625” ID x .093” thk)• WB131 - Lock Nut (.625-11UNC Steel hex Grade 5 - plated)

HITCH BRACKETS

1.62.25

TYP.R.25

.751.50

5.00

TYP.

17/32" - 0"+1/16"

1.00TYP.1.50 1.00

8.00 2.00

1.00 2.13

(TYP).656+

-.063.000

TYP .25 2.87

R.25(TYP)

1.19 2.37

.75 1.50(TYP)

6.00 .781+-.063.000

(TYP) .38 4.06

R.38(TYP)

-

(TYP).000

1.25

(TYP) .75

.063

2.63

.813+1.50

6.00

.50 4.06

R.50(TYP)

4.06 .375

R.38 (TYP)

9.00

1.19

(TYP)(TYP).000 .75 1.50 .781+

-.063

2.38

.50 4.06

R.63(TYP)

1.71 3.43

1.88 2.25(TYP)

6.00

1.030+-.060.000

1.71

10.00

.060

(TYP).000 1.62 -

(TYP)1.030+ 2.25

3.43

.50 4.06

R.63(TYP)

1.03

12.00

1.50 TYP.

.060+

.000-

3.431.71

2.25TYP.4.06.50

R.63TYP.

4.06.50

R.63TYP.

1.713.43

1.03

12.00

1.50- .000+.060

TYP.3.00TYP.

3

.63 4.06

R.63TYP.

.000

.060

3.50

+

1.63

1.03-

1.88

6.00

2.25±.030

HB106 - FITS PPI-106M HB126 - FITS PPI-126 & PP12XL

HB237 - FITS PPI-237 HB237H - FITS PP23XL

HB237-6 / HB237-8 - FITS PPI-237 HB302 - FITS PPI-201, 301, 321, 401, 421

HB304 - FITS PPI-201, 301, 321, 401, 421 HB305 - FITS PPI-201, 301, 321, 401, 421

HB331 - FITS PPI-331 HB402 - FITS PPI-42XL

thectdgroup.com • info@thectdgroup.com • 1-800-204-4150

I N T E G R A

C

A S T I N G

S

Our products. Your solution.

WELD-ON IMPLEMENT HITCH BRACKETSVarious sizes allow for easy adaptation of the 3-in-1 Implement Hitch.

Always maintain proper PTO dimensions when replacing your implement hitches. It is the responsibility of the Implement Manufacturer / Engineer to determine if the Weld-On Bracket / 3-in-1 Implement Hitch is adequate for the implement application.

IMPORTANT

WARRANTY

The vertical loads and draft loads of hitches and clevises in this catalogue are maximum ultimate strength ratings only.

High vertical loads may require additional induction hardening if affected areas are not hardened already.

Excessive vertical loads which exceed proposed ISO 6489-3 Tractor Drawbar standards will result in excessive wear to hitch or drawbar. Please consult with our sales personnel.

When mounting hitches, always use full shank of the bolt through brackets to maximize the bolt strength.

Warranty for all applications is VOID if usages are outside ASAE standards.

CANADIAN TOOL & DIE LTD. warrants its products to be free from defects in workmanship and material for a period of one year from the date of purchase.

CANADIAN TOOL & DIE LTD. will not be held responsible for any failure of these products due to misuse or abuse (ie. overloading) or incorrect installation.

CANADIAN TOOL & DIE LTD.’s responsibility on all goods purchased is limited to replacement of defective parts only and excludes any compensations for cost of transportation, installation, removal or repairs as well as any contingent or resulting loss or damage that may have occured as a result of defects in workmanship and material.

AFTER AUTHORIZATION FROM CANADIAN TOOL & DIE LTD., such parts are to be returned prepaid to CANADIAN TOOL & DIE LTD., Winnipeg, MB, Canada for inspection. Parts found to be defective will be replaced at no charge, FOB our plant, or full credit will be allowed at our option.