Date post: | 01-Nov-2014 |
Category: |
Documents |
Upload: | karthick-lakshminarayanan |
View: | 137 times |
Download: | 2 times |
A STUDY ON CAPITAL STRUCTURE IN ARIGNAR ANNA
SUGAR MILLS - KURUNGALAM
The Project Submitted to theBHARATHIDASAN UNIVERSITY,THIRUCHIRAPALLI
In partial fulfillment of the requirements for the award of the degree of
MASTER OF BUSINESS ADMINISTRATION
Submitted byC.PRABHU
Reg.No.11290617
Under the guidance of Prof.A.DIRAVIAM, M.Com.,B.Ed.,M.B.A.,M.Phil.,(Ph.D)
(Head of the Department - Bharath Institute of Management)
BHARATH INSTITUTE OF MANAGEMENT
BHARATH COLLEGE OF SCIENCE AND MANAGEMENT
THANJAVUR-613 005
FEBRUARY 2013
BHARATH INSTITUTE OF MANAGEMENTBHARATH COLLEGE OF SCIENCE AND MANAGEMENT
Bharat Avenue, Near New Bus Stand,
Thanjavur – 613 005, Fax:
04362 – 227185
Phone: 04362 -227937 / 228081
GUIDE . Prof.A.DIRAVIAM, M.Com.,B.Ed.,M.B.A.,M.Phil.,(Ph.D) Date : Head of the Department,Bharath Institute of Management
CERTIFICATE
This is to certify that the project report entitled A STUDY ON CAPITAL STRUCTURE IN ARIGNAR ANNA SUGAR MILLS – KURUNGALAM is the bonafide research work done and submitted by C.Prabhu (Reg. No.11290617) under my guidance in partial fulfillment of the requirements for the award of MASTER OF BUSINESS ADMINISTRATION and the project has not previously formed the basis for the award of any other degree.
Signature of the Guide
]
Signature of the Director Signature of the external examiner
C.PRABHUReg.No.11290617II M.B.A.,BHARATH INSTITUTE OF MANAGEMENTBHARATH COLLEGE OF SCIENCE AND MANAGEMENTThanjavur- 613 005.
DECLARATION
I hereby declare that the project report entitled A STUDY ON CAPITAL
STRUCTURE IN ARIGNAR ANNA SUGAR MILLS – KURUNGALAM submitted for
the M.B.A., Degree is my original work and the project report has not formed the basis for
the award of any other degree.
Place : Thanjavur.Date : Signature of the student
ACKNOWLEDGEMENT
I am deeply indebted to Shri. N.GANESAN M.COM., M.Phil., Ph.D., Founder of Bharath Group of Institutions , Thanjavur for having given me an opportunity to undergo M.B.A course in this institution.
Iexpress my sincere gratitude to Mrs.PUNITHA GANESAN, B.Sc., M.A., Secretary Bharath Group of institutions,Thanjavur for his encouragedment to pursue this project.
I express my sincere and deep sense of gratitude to Prof.Dr.T.VEERASAMY, M.A.,M.Phil., Ph.D., Principal Bharath College, for having promoted strict discipline and hard work during the period of my study in this college.
I wish to express my profound thanks to Dr.RM.CHIDAMBARAM, M.Com.,MA.,MBA.,Ph.D., Director. Bharath Institute of Management, for her constant encouragement for giving me all the assistance to complete this project.
I express my sincere and deep sense of gratitude to Prof.A.DIRAVIAM, M.Com.,B.Ed.,M.B.A.,M.Phil.,(Ph.D).,vice principal &Head of theDepartment, Bharath Institute of Management for the valuable guidance without which it would not have been possible for me to complete this report successfully.
I take this opportunity to express my deep sense of gratitude and respect to my beloved guide Prof.A.DIRAVIAM MBA., M.Phil., (Ph.D) Faculty, Bharath Institute of Management for the valuable guidance without which it would not have been possible for me to complete this project report successfully.
My sincere thanks to xxxxx, Mr xxxxxxxxxx, Training and Development, and other staff who help me in various ways while completing this work.
And last but not least, I would like to thank my beloved parents and all my friends for their moral support during my project work.
Place : ThanjavurDate : Signature of the student.
CONTENTS
Sl.No Title of the Chapter Page
Chapter I 1.1 Introduction
1.2 Review Of Literature
1.3 objective
1.4 Scope
1.5 Limitations
Chapter II 2.Company Profile
Chapter III 3.Analysis & Interpretation
Chapter IV 4.1 Findings
4.2 Suggestion
4.3 Conclusion
Annexure Bibliography
Introduction
Capital Structure refers to planning the divide of available capital for the purpose of
maximizing the long term profitability of the firm. The project planning is a process by which
companies allocate the funds to the various investment projects designed to ensure the growth
and profitability.
Capital structure means the mixture of share capital and other long term liabilities. In
the company, we know that liability of each shareholder is limited but how much be the total
liability of shareholder is the important question? It can be decided by choosing best capital
structure. In capital structure, we include, equity share capital, preference share capital,
debenture and long term debt. Suppose, our company's capital structure may show 50%
equity share capital, 30% pref. share capital and 20% debentures. But all companies' capital
structure may not be equal because different business need different type of capital structure
which will be suitable according to the need of business.
Some of companies want to become smart. They slowly decrease equity share
capital and increases loan excessively which may be very risky because these company has to
pay fixed cost of interest and has to manage repayment of loan after some time. Some
mistake in it, may be risky for its solvency. So, decision relating to capital structure is very
important for company
Capital structure planning is very important to survive the business in long run. After
simple watching the balance sheet of company, you see two sides of balance sheet. One side
is liability side and other side is asset side. Liability side is the mixture of finance of company
which company has collected from internal and external sources and it has been used or will
be used for development of company.
Liability side of balance sheet is made under perfect capital structure planning.
Finance manager and other promoters decides which source of fund or funds should be
selected after monitoring the factors affecting capital structures. So, capital structure planning
makes strong balance sheet. The right capital structure planning also increases the power of
company to face the losses and changes in financial markets. Following points shows the
importance of capital structure and its planning.
The research title to study the “A STUDY ON CAPITAL STRUCTURE AT
ARIGNAR ANNA SUGAR MILLS LTD.” The importance of study is Capital Structure
helps in decision making process when company making Expansion, Establishment of new
projects etc. It helps to know the present value of the company and it avoids unnecessary
expenditure in to undertake the new projects, in the time of removing the decline stage’s
products Etc.
Research objective of the study is to determine whether acquiring capital asset is a
viable or not, to find out the Post Payback Profitability and to find out the Accounting Rate of
Return on investment and to know the Net Present Value.
As I studied in my project on capital structure I found out since the capital invested in
the assets are recovered within a short period of 1.6 year. The proposal is viable to the
company. Post pay back profitability is Rs.14259.49 lakhs. Finally, I would like to suggest
that The Arignar Anna Sugar Mills was located at Kurungulam. It is a small village in
Thanjavur Districts. It was established in the year 1971-72. The company achieved high
crushing of sugar cane session in the year 2005-06 that is 16,39 424 tones. The present year
2008-09 it crushed sugar cane at 17, 44,267 tones. The company also celebrated in company
premises and award given who are directly involved in this achievement.
COMPANY PROFILE
The Tamilnadu Sugar Corporation Limited, Chennai, is a Registered Company under
the provisions of Companies Act, 1956. The Arignar Anna Sugar Mills is one of the Units of
Tamilnadu Sugar Corporation Limited. The Arignar Anna Sugar Mills is situated in
Kurungulam Melpathy Village, Thanjavur Taluk, about 16 Kilometres away from Thanjavur
on the Thanjavur — Pudukkottai Highways.
The total area of land, in which the Mill is situated, is 154.25 Acres. Crushing
operation will be going on for about 6 months in between December —May. During June to
November the work of Overhauling of Machineries will be undertaken. The Factory had its
maiden crushing during 1976-77 with an installed capacity 1250 Metric Tonnes of Cane per
day. The crushing capacity of the Mills was expanded during 1989-90 from 1250 Metric
Tonnes to 2500 Metric Tonnes and crushing at the expanded capacity was started on
26.1.1990 under Expansion and Modernization Scheme.
SUGAR
The main product of Sugar Industry is White Crystal Sugar. A typical White Crystal Sugar contains sucrose (97.5%) reducing sugar (0.86%) other organic compound (0.46%) ash (0.43%) and water (0.75%). Sugar Cane contains 11 to 15% sucrose out of which only 8 to 11% is crystalizable. The remaining sucrose goes into by product along with other sugars viz. Glucose and Fructose.
BAGGASE
Baggase is the first by-product of cane sugar production. The fibrous residual matter left out after extraction of sugar cane juice is known as Baggase. It contains about 48.50% moisture, 48.0% fibre and 2.40% sugar and other minor constituents. It has been mainly used as fuel in Boiler to raise steam. Nowadays it can be used for paper production.
PAPER PRODUCTION FROM BAGASSE
Baggase is used as a raw material in the paper industry. Cuba leads in this industry. A Fungi called white-rot fungi degrades the fibre to cellulose. Hemi cellulose and the lignin. It is done in huge fermentation vessels where the fungi is inoculated. After this preliminary treatment , the material is washed and mixed with a 2 % NaOH solution. This enables
dissolution of lignins. The fibrous matter is washed followed by pulping impresser digesters using sodium sulphide. . sodium sulphide liquors for about 4 hours. The pressure is released in tanks, followed by straining and washing to remove the pith. The digested, washed, pulp is now suitable for mixing with other bamboo pulps to be used for paper making.
FILTER CAKE:
It is obtained from the cane juice, which is used as manure. In the process of clarification, the hot limed juice is delivered to large setting tanks. It consists of large tank with centrally placed slow moving agitator. Horizontal compartments or trags enable mud to slow down, and each having over flow take off for clarified juice. The muds separating in the settling tanks are pumped to rotary filters. Here they are filtered under vacuum using some powdered bagasse (bagacillo) as a filter aid. The pH of the mud to be filtered will be around 7.5. The temperature of sludge is maintained around 60 ° C to enable effective filtration. The cake is continuously washed on the filter and some sugar is recovered here. The cake is rich in protein and waxes.
MOLASSES
Molasses is one of the important by-products , its production depends on the total quantity of cane crushed as well as quality, which varies from region to region . The increases in the percentage of sucrose in molasses greatly affects the final quantity of sugar.
Molasses is the final effluent obtained in the preparation of sugar by repeated crystallization; it is the heavy viscous liquid from which no further sugar can be crystallized by the usual methods.
BLACKSTRAP MOLASSES
Molasses is called as blackstrap molasses because of its dark brown viscous nature. It must not contain less than 40% of total sugar as invert.
The components of molasses include
1. Major components ( water, sugar, non-sugars ) 2. Minor components ( Trace elements, vitamins, growth substance)
WATER:
Commercial molasses have an average water content of 20% . The original end-products in the factory contain 12-17 % water.
The principal sugar present in the molasses are sucrose, glucose
and fructose, the later two making up the major portion of the reducing sugars. The alkaline degradation of sucrose leads not only to glucose and fructose but also to Psicose and other carbohydrates. Molasses sometimes contain another non-reducing sugar namely the trisaccharide ketose.
CO-GENERATION PROJECT: The cane growing share holders of our Company have given their
Consent for the implementation of Co-generation Project at our Mills during the special meeting convened to come out from the sickness and to get Profit in the long run of the industry as the cost of production has considerably increased. Accordingly, action has been taken to implement the Co-generation Project at a capital outlay of Rs.60.00 crores in which the Cane growing members’ share is 10%. (i.e. Rs.6 crores). In respect of growers’ share amount, we have collected Rs.50.00 per tonne of Cane from the Cane proceeds of our cane growers towards share amount. The balance share amount will be collected from the cane growing members in the ensuing season’s cane proceeds. Necesary proposals has been submitted to the Government by our Head Office for implementing the project in our Mills. Orders are awaited.
CANE INFORMATION Sugar cane is a traditional crop of India and it is under cultivation since time immemorial in the Indo-Gangetic belt. There are numerous mentions of sugarcane in several of our ancient books such as "Atharva Veda", "Rig Veda" etc dataing back to 1000BC TO 3000BC. Foreign travelers to India, about 2000 years ago, have mentioned about sugar cane. Buddhist literature has several mentions of sugar cane and sugar.
SUGARCANE Family GraminaeaClass MonocotyledenesOrder GlumaceaeCultivars Complex Hybrids evolved from SpeciesScientific Name Saccharum officinarum . LCultivated Species 1. Saccharum officinarum . L 2. Saccharum sinense Roxb 3. Saccharum barberi JeswSEASONS FOR SUGARCANE Early December – January ( Margazhi – ThaiMid February – March ( Masi – PankguniLate April – May ( Chitthirai – VaikasiSpecial June – August ( Aanni – Avani )AREA COVERAGE Early and Mid Season planting 70%Late Season Planting 20%
Special Season Planting 10%VARIETIES UNDER CULTIVATION Early Co 86032,Co-89014,Co-99004,Co-
99006,CoC-23,Co-94101,Co-94008,Co-92012,CoV-94101
Midlate CoSi-6,CoC-22,Clone-960067
Special All early varieties Varieties Specially Suited to Drought Co-99004,Co-99006,CoSi-6,Saline/ Alkaline Soils CoSi-6,CoG-930076
Cane varieties under cultivationSl.No.
High Sugar Varieties Medium Sugar Varieties Low Sugar VarietiesVariety % Variety % Variety %
1 Co 86032 75.53 Co-Si-6 5.35 0.00 0.002 Co-89014 7..62 CoC 0.42 3 CoC-23 1.45 C-960067 2.08 4 Co-99004 1.34 5 Co-94101 0.25 6 Co-94008 4.67 7 O.V 1.29 TOTAL 92.15 7.85 0.00 0.00
Arignar Anna Sugar Mills was a pioneer in the research-based Sugar Industry,
situated in the state of Tamilnadu; it combines modern technology and the latest
mechanization techniques and compliments it with a 6-decade experience.
Alongside, the factory waste, namely molasses is used by TASCO Oregano
Chemicals. Industrial alcohol/rectified spirit are manufactured with the sugar waste. The
TASCO is also looking towards Venturing into cogeneration of power at all of its sites, with
excess power being sold off to the state power grids.
VISION
The TASCO will continue to expand its operations by expanding production into new
markets and applications. Growth will also come from value added diversification derived
from the group’s strengths in products and processes.
The quality of the products and services delivered by the TASCO will always strive to exceed
customer expectations.
MISSION
The TASCO always has and will continue to use renewable resources in its products.
It believes that this is an important need for sustainable development.
The TASCO has been and always is aware of its social commitment to the community
that it serves. It believes that we have a responsibility and obligation to return to society what
we earn from it.
History of the Arignar Anna Sugar Mills – KURUNGULAM
Tamilnadu Sugar Corporation Limited an undertaking of the Government of
Tamilnadu was incorporated in 17-10-1974. The first mill to be commissioned by Tamilnadu
Sugar Corporation Limited was “Arignar Anna Sugar Mills”. Arignar Anna Sugar Mills is
situated at a distance of 15 Kms. away from Thanjavur – Pudukottai Main Road. The mill
had acquired 154.25 acres of land belonging to the Government and Private Owners. The
Unit commenced its trial (Maiden) crush on 20-02-1977 with an installed capacity of 1250
TCD. The actual cost of the Project was Rs.643.62 Lakhs, whereas the cost of the project
was originally envisaged at Rs.640.32 Lakhs. The Capital outlay of the project viz.
Rs.643.62 Lakhs, whereas the cost of the project was originally envisaged at Rs.640.32 Lakhs
was met out by the issue of Share Capital, obtaining Long Term Loans from Financial
Institutions like Industrial Development Bank of India, Industrial Finance Corporation of
Indian and Indian Overseas Bank. Tamilnadu Sugar Corporation Limited had alloted Share
worth Rs.100.00 Lakhs (constituting 24.33 % of the total Share Capital Rs.411.10 Lakhs) to
cane Growers and Public in the Mill’s jurisdiction, the balance Capital was subscribed the
Government of Tamilnadu.
EXPANSION:--
The Mill had obtained a Letter of Indent from the Government of India for Expansion of its
capacity from 1250 TCD to 2500 TCD during March 1988 (L.I.No.66(1998), dt.14-03-1988).
The capacity was expanded during 1989-90 from 1250 TCD to 2500 TCD and crushing at
expanded capacity was commenced on 26-01-1990.
Arignar Anna Sugar Mills entered the sugar industry in the late thirties. Based in the
Indian state Tamil Nadu, it began operations by setting up two sugar factories, both of which
used a scientific method of cultivation. Despite increasing emphasis on traditional cultivation
methods, Arignar Anna Sugar was among the few to introdmodernity to this industry. During
Sugar factories in Tamil Nadu were being victimized through state policies. Private farms
were being nationalized and the co-operative movement quickened the pace of the ultimate
closure of these farms. This was unfortunate because the yields from the ARIGNAR ANNA
farms were among the best in the world. The yield of cane was 64 ton per acre, recovery of
sugar was 11.5% per acre and yield of Sugar was 7.36 tons per acre. Realizing that it could
no longer work towards its full potential, the TASCO gave up its pioneer position in Tamil
Nadu Sugar industry and re-opened the Arignar Anna Sugar Mills at Kurungulam in the dean
state of Karnataka.
On 6th June 1971, the foundation stone at the factory of the Arignar Anna Sugar Mills
was laid by the Governor of Tamil Nadu. Due to the prevalent India-Pakistan war at that
time. The factory was erected on a war footing and commissioned in a record time of less
than ten months. Production started on 20th April 1972.Today, advanced technology and a
high level of mechanization has made Arignar Anna Sugar Mills one of India’s largest sugar
producers. This TASCO has one of the highest average recovery rates in the industry.
ABOUT THE GROUP
The TASCO Group beats with strong traditional values; hard work, dedication and a
caring attitude. At the same time, it employs modern industrial techniques and is today, the
epitome of contemporaries, omnipresence has a new name. TASCO, manifesting in ways &
means the touch your life, in more ways than you could imagine. Society too experiences the
humane touch of TASCO; in terms of healthcare, rural development and environment-effort.
Going beyond the call of duty because ‘More than state-of-the-art, its state-of-the-heart’ that
matters.
Dynamism put to a growth-oriented approach, underlined with the will to achieve best
describe the group that is the air supply of various industries in India. The TASCO Group
will continue to expand its operations by expanding production into new markets and
applications. Growth will also come from value added-diversification derived from the
Group’s strengths in products and processes.
The Quality of the Products and Services delivered by the TASCO Group will always
strive to exceed customer’s expectations. The TASCO Group always has and will continue to
use renewable resources in its products. It believes that this is an important need for
sustainable development.
The TASCO Group has been always being aware of its Social commitment to the
community that is serves. It believes that we have a responsibility and Obligation to return to
society what we earn from it. Since the last six decades, commencing operations in the high
growth field of sugar, the Group has created the perfect platform for its future success. Built
upon the foundation of care, each of the following facets of the Group was response to a
need.
LOCATION
Arignar Anna Sugar Mills is Located at Kurungulam, a small village in the Thanjavur.
Kurungulam lies in the potential basin between two rivers, Kaveri.
BANKERS AND INSTITUTION:
BANK OF INDIA.
ANDHRA BANK.
BANK OF BARODA.
SYNDICATE BANK.
UNION BANK OF INDIA.
INDUSTRIAL DEVELOPMENT BANK OF INDIA.
KARNATAKA STATE INDUSTRIAL INVESTMENT AND DEVELOPMENT.
CORPORATION BANK.
SICOM LIMITED.
STATE BANK OF INDIA.
COMPANY ACHIVEMENTS
Record crushing by GSM LTD
Arignar Anna Sugar Mills Ltd., Kurungulam completed its crushing season 2005-06
with record crushing achievement. In the season GSM Kurungulam has crushed 16, 39,424
tones with an average sugar recovery of 11.65%. In view of this record crushing the co-
operation from cane suppliers, harvesting and transport agencies and workers are really
commendable. The present year 2008-09 cane crushing of 17, 44,267 tonnes is the highest in
South India. In 1994-95 the GSM got 2nd place in India for cane crushing.
Celebration Rewards and Recognitions by GSM LTD
Achievements made in record crushing were celebrated in GSM Kurungulam by
encouraging and motivating the cane growers, Harvesting and transport agencies. This was
done in a colorful function in the premise of factory on 30.05.2006. As mark of their
contribution in each category highest three prizes were distributed during the function
wherein farmers of the area, harvesting and transport agencies were participated.
PRODUCTION PROCESS
The Specification of Kurungulam Sugar is:
Polarization: 99.80 to 99.88
Moisture: 0.35 to 0.06
Icumsa: up to 150 units
Ash: 0.08 to 0.10Granulation: S-30 of Indian Sugar
Standard Color: Sparking WhitePacking: Present Packing: 100Kg
The ARIGNAR ANNA SUGAR MILLSLTD is the manufacturer of “White Crystal
Sugar”. Along with sugar some other main products manufactured in Arignar Anna Sugar
works Ltd. Are
1. CO – GENARATION (POWER).
2. DISTLERY PRODUCTS.
3. BIO – GAS.
4. OTHER BY PRODUCT.
COMPANY QUALITY POLICY
1. We are committed to produce and supply products to meet our costumer’s needs.
2. We shall continually strive to improve the effectiveness of our Quality
Management system.
3. We shall train and motivate our employees for continual improvement.
4. We are conscious of our responsibility towards Safety, Health and Environment.
5. Quality is what we Think, Act and Believe
POWER DIVISION
The factory being the cooperative society with more then 25.000 farmer members of
the local area involved in its activity and selling their produce to the factory and dependent on
the sugar factory for their existence and livelihood, the creation of co-generation facility has
become prime need due to socio-economic reasons. Secondly, the enormous quantity of
Bagasse that is generated by the factory shall be best utilized by the creation of co-generation
which will help the factory by generating and making available the power.
Further taking into consideration the acute power shortage in the country, both on
demand and energy terms and effort to generate power and augment the grid supply will be a
laudable and worthy effort; the factory has been planning for setting up a 41MW Multi-fuel
Co-generation power project at the factory site. This will enable the factory to play a
significant role in supplying power to the public utility simply by increasing its operating
efficiency in addition to meeting its need of power.
The main purpose of setting up this power project ,as principal fuel, supplemented by
Bagasse, other bio-mass fuel and conventional fuels(as needed for maximizing utilization of
proposed power project) for at least 300 days per year. The part of the project cost shall be
raised by increase in Share Value, a resolution for which has already been passed at an
Annual general Body Meeting held on 22/09/2003 and the same have been got approved by
the Govt of India & Central Register of Co-operative Societies, New Delhi vide their Letter
No.L-11016 /46/87-L&M dated 5th Feb.2004.
The factory, for this worthy project, has obtained all statutory/non-statutory
clearances such as Karnataka State Pollution Board, Airports Authority of India,
Environmental clearance, In- principal clearance, Clearance for installation of 110 KV Sub-
Station from the Karnataka Power Transmission Corp. Ltd which has already been set up
now, to commence with the project.
PRODUCTION AND DISTRIBUTION OF POWER
Particulars Capacity ( MW)
Self load 2.00 MW
Sugar Unit 4.50MW
Export to HESCOM 17.50MW
TOTAL 24 MW
In the off season the plant will import the power of 1.11 MW to maintain the whole
plant.
To produce 1 MW of power the required Bagasse and 60 tonne of water should be
needed. Whole plants machineries has manufactured by Bharat Heavy Electrical Limited.
And to maintain the whole plant automatically the plant management will use DCS software
(Distribution Control System)
DISTILLERY AND CHEMICAL DIVISION
TASCO Organo Chemicals
The factory had installed its own Distillery Unit in October 1984 as a by-product
industry with its capacity of 30KL liters per day .However taking into consideration the stage
wise expansion of the Sugar Mill and the excess availability of molasses, the installed
capacity was later on increased 30 to 90KL Liters with another extra investment of 30.27
crores. The average recovery of Spirit per MT of molasses is 265 Ltrs.
Basically in the beginning means 1986 to 1999 the plant was given on rent to
Saptagiri Enterprise, Bangalore
Recently means in the year 2002 the plant was expanded with extra of 30KL capacity
with extra investment of 30.27 crores. And also recently its expansion work is going on by
increasing the capacity 60 to 200
BAGASSE
Bagasse is the main raw material to the co-generation. It will obtained from sugar unit
as a waste material. So this will become main raw material to the co-generation department.
ETHANOL PLANT PROJECT
The factory also has planned to install Ethanol Plant at the factory site having capacity
of 30,000 LPD for which a detailed Project report is under the progress.
FUTURE GROWTH AND PROSPECTUS
Financials - Projects under Implementation
New Projects
A: The Company has a well-defined strategy for near future. It has identified certain
profitable opportunities that may be captured. These are as follows:
Capacity increase Schedule for commissioning
1. Sugar 8500 TCD to 12000 TCD
12000 TCD to 15000
TCD
IV quarter of 2009
IV quarter of 2009
2. Cogeneration 24 MW to 44 MW IV quarter of 2010
3. Distillery 60 KLPD to 120 KLPD IV quarter of 2009
4. Bulk & Specialty
Chemicals – Expansion
& New Products
IV quarter of 2009
B: Leased sugar factories & distillery Tamil Nadu, GSML has acquired two sugar factories
and one distillery on lease recently further adding to its capacities. These units are in high
recovery areas of western Tamil Nadu.
Projects under Implementation at Kurungulam
Expansion of Ethyl Acetate from 60 TPD to 100 TPD
TASCO Organo Chemicals will boost its Ethyl Acetate (EA) production capacity to
cater to the increasing Local & International demand. The expansion was scheduled for
completion by mid 2006. On completion of the project the Company possessed a production
capacity of 30000 MT per annum, widening its global export base.
Our technology uses Renewable resources to manufacture EA, which is ever so
important in this age of rising prices due to depleting crude oil reserves our long-term goal is
to grow our markets by expanding existing product lines and by introducing new products
based on sustainable technologies & renewable resources”.
Specialty Chemicals
With a view to augment our range of specialty chemicals, we have added one more
baldheaded based product and successfully commissioned the plant recently. The product is
having good export potential.
One time land application for bio-machinated distillery spent wash
Besides the pollution control measures like bio-composting etc for distillery effluent,
Pollution control board has for the first time allowed us to use bio-machinated spent wash to
be used as liquid manure on farm lands. This is being done successfully with our tie-up with
Rahuri Agricultural University for close co-ordination & effective implementation.
Projects under Implementation at Kurungulam
Ethyl Lactate project (450 Tonnes per annum (TPA)
The product is eco-friendly solvent and used for various applications such as the
cleaning of printing equipment, rolls, lithographic plates or blankets, etc., and is will
respected for its superior cleaning ability The raw material used for the manufacture is
molasses which is renewable resource and coming as by product of sugar. The plant is under
commissioning.
PRODUCTION DEPARTMENT
PRODUCTION HIERARCHY
GM (Manufacturing)
Asst. Manager(Lab)
Sr. Manager (Mfg)
Asst. Manager
(Mfg)
Officer (Jr.) Officers
Lab Chemist
Manufacturing Process of Sugar
Sugar (Sucrose) is a Carbohydrate that occurs naturally in every fruit and vegetable.
Sugar occurs in greatest quantities in sugar cane and sugar beet from which it is separated for
commercial use. The natural sugar stored in the cane stalk is separated from the rest of the
plant material through a process known as refining.
In the first stage the sugar cane is cut into small pieces through cutter, and then the
small pieces are pressed to extract the juice. The extracted juice is then sent to boiler house
and heated into two stages. In primary stage it is heated up to 72 ○C and in the secondary
stage to 102 ○ C. hen lime sulphur dioxide and phosphoric acid is added.
Lime is added to settle impurities, sulphur dioxide for bleaching a phosphoric acid to
maintain phosphate content. Then again the juice is heated to 100 ○C to 103 ○C. The juice
begins to thicken and sugar begins to crystallize. Then the crystals are spinned in the
centrifugal pan to remove the syrup producing the raw sugar. And in the final stage, shipping
the sugar to a refinery where it is washed and filtered to remove remaining non-sugar
ingredients and Color and then crystallizing, drying, and packing the refined sugar
OBJECTIVES
1. Production department is the hearts of the industry so it should be continue till the
organization will close.
2. Production department has to maintain good quality of sugar.
3. Production department should produce the particular type of sugar as per requirement
of customer and as per quality, which is approved by quality control department and
govt.
4. This department should maintain the production procedure without any stoppages
PRODUCTION DEPARTMENT
Sugarcane contains about 14% fibred and 86% juice consists of about 13% Sucrose and
73% moistures and non-sugar solids.
Production Process
Cane
Mills Bagasse Fuel Boiler
Juice
Weight Mixed Juice
Juice Heater
(Heater of 70 c)
Juice
Sulphitation
Sulphured Juice
Juice Heater (heater to 100 c)
Clarities
Clear Juice
Evaporator
Syrup
Syrup Sulphured Syrup
Pons
Masscult
Crystallizes
Centrifugal
White sugar
Graders
Sugar weighted and Baggage’s
AGRICULTURAL DEPARTMENT
INTRODUCTION
The agri departments one of the important dept of the company as its function is to the
provide raw materials to the factory & providing proper guidance to the farmer about
cultivation of cane new techniques and supplying seeds and fertilizer.
In the agricultural department 13 Cluster officer i.e. 4 at Mudhol, 1 at Jamakhandi, 1
at Rabakavi, 1 at Terdal, 1 at Harugeri, 1 at Satti, 1 at Mugalkhod, Mudalgi, Kulgod, and one
at Saidapur and Mahalingpur.
The farmers are providing Cane & bonded.i.e. Seasonal 1 year short term, long
Term 15-20years. The objective of agricultural department is to increase yield level
and increasing cane area horizontally and vertically utilizing minimum water.
Objectives
New variety & good quality seeds are provided to former on credit basic without
interest and due a amount incurred in next season. Fertilizers are also provided on credit basic
with interest. Margin money help for mini lift irrigation schemes and recovered through three
installments.
AGRICULTURE DEPARTMENT HIRERARCHY
General manager
Office manager
Assistant Manager
Fertilizer section
Clerk
Clerks
Office clerk
CANE DEVELOPEMENT DEPARTMENT
General Manager
Cane DevelopmentOfficer
Assistant Cane Development Officer
Supervisors
Office Boy
OBJECTIVES OF CANE DEVELOPMENT DEPARTMENT
To get high yield of sugar cane to the factory in right time.
To improve of variety of cane.
To develop the backward area.
To provide all facilities like seeds, fertilizers, unloading and loading charges.
To maintain registration of cane, gang and plantation.
To undertake seeds distribution program.
To soil of this area is varying alluvial fertile soil is there on the bank of Krishna and
Ghataprabha rivers. Further upwards, there is medium deep black soil, vary fertile well
drained light to medium clay soil, which has received heavy application if from yard Manu
science last 10-12 years also is presently in some parts.
The main function of cane development department is to arrange for raw material,
which is required to the factory. For this order is received by priority basis (that is growers
who grows sugar cane first in his led). They also are providing a loading gang with 8 to 10
members per village and also a bonded tractor for transportation.
SUGAR CANE VARIETIES
As present COC-671, COC-8011 is very popular sugar cane varieties in this area. The
factory had introduced a new variety of sugar that COC-86032 three years back. Here more
than 85% of sugar cane is of variety COC-671 which is mainly grown in this area.
S.L NAME OF THE VARIETY AREA IN (HECATRE) ( R )
1 COC-671 1153 60.02%
2 COC-8011 0480 24.99%
3 COC-86032 1921 14.99%
HUMAN RESOURCE DEPARTMENT
INTRODUCTION
Personal management is that the field of management which has to do with has to do with
the planning, organizing and controlling various operative activities. Operative activities
includes procuring, developing maintaining and utilizing a labor force in order that the
objectives and interest for which the company is established or attained as effectively and
economically as possible and the objectives and interests of labour itself are served to the
highest degree. It is clear that personal management. It is clear that personnel management. It
involves following functions,
It is a management of human resources of the enterprises.
It is concerned with the effective utilization of human resource.
It is staff activities requiring special knowledge and skill.
It is concerned with the achievement of common goals as well as integration of
individual effects with the common goals.
The principal and functions of general management are applicable at this area of
management
Personal management in Arignar Anna sugar mills ltd. Is a neglected area. No
separate personnel department is maintained there. The administration section
performs personnel function in this organization.
Personnel department helps in performing the functions like Recruitment, Selection,
training, Motivating and Placement of workers. If there is no personnel department, it reduces
the moral of the workers.
This is also one of the important function of this department, keeping in view to
update his knowledge and to increase his efficiency, so time after time such program are
arranged by this department and employees of the company are kept in touch with the least
ways of morale booster and fondness towards the company is generated in the blood of
employees.
OBJECTIVES
To maintain a healthy relationship and act as a mediator between employer
and employees.
To recruit and select the prospective candidate arrange for an interview and fill
the vacancies in the concerned department.
To take care of all the activities done by the other departments.
Personal department is responsible all the good and bad workers done by the
workers.
HR department has to maintain the good relationship with all other
departments
To know the meaning definition and methods of Capital Structure.
To determine whether acquired capital asset is viable or not.
To find out the Post Payback Profitability.
To find out the Accounting Rate of Return on investment.
To know the Net Present Value.
To find out the Internal Rate of Return on investment.
To know the Profitability Index.
SCOPE
1) To maintain full and systematic records of business transactions: Accounting is the
language of business transactions. Given the limitations of human memory, the main
objective of accounting is to maintain a full and systematic record of all business
transactions.
2) To ascertain profit or loss of the business: Business is run to earn profits. Whether the
business earned profit or incurred loss is ascertained by accounting by preparing profit
and loss account or income statement. A comparison of income and expenditure gives
either profit or loss.
3) To depict financial position of the business: A company is interested in ascertaining
its financial position at the end of this period. For this purpose, a position statement
called Balance Sheet is prepared in which assets and liabilities are shown if the assets
exceed liabilities, it is financially healthy in other case it is financially weak.
4) The study under taken on Capital Structure decisions at Arignar Anna (distillery and
chemicals division) helps in the evaluation of the Capital Structure decisions already
taken and to be take in future. The study will cover the different methods used for the
Capital decisions and their viability, their payback or return on the investment
5)
LIMITATIONS
Every company or organization should have well-established training policy. A
training policy is considered necessary for the following reasons.
a. To indicate a company’s intention to develop its personnel to provide guidance in the
framing and implementations of programs to provide information concerning them to
all concerned
b. To discover critical areas where training is given on a priority basis and
c. To provide suitable opportunities to the employee for his own betterment.
Employees are coached and instructed by training instructors, they learn the job by personal
observation and practice. It is learning by doing.
Merits
1. Learns on the actual equipment in case and in the true environment of his job and
therefore, gets a feel of actual production condition and requirements
2. It is highly economically.
3. Learns rules and regulations through observation.
4. It is appropriate for short term learning programs
Demerits
1. Instruction is often highly disorganized and not properly supervised.
2. Lack of motivation.
COMPANY PROFILE
The Historical Background Of The Indian Sugar Industry
The sugar industry is proud to be an industry, which spreads the taste of sweetness to
the mankind. The history of origin of this industry is as old as the history of main him self.
Sugar is generally made from sugarcane and beet. In India, sugar is produced mainly from
sugarcane. India had introduced sugarcane all over the worlds and is a leading country in the
making sugar from sugarcane.
‘Saint Vishwamitra’ is known as the research person of the sugarcane in religious
literature. We can find the example of sugarcane in Vedic literature also as well as sugarcane.
We can also find the reference of sugar and the sugarcane in Patanjali’s Mahabashya and the
treaty on the grammar of ‘Panini’. Greek traveler ‘Niyarchus’ and Chinese traveler ‘Tai-
Sung’ have mentioned in their travelogue that the people of India used to know the methods
of making sugar and juice from sugarcane the great Emperor Alexander also carried
sugarcane with him while returning to his country.
Thus from different historical references and from some ‘Puranas’ it can be concluded
that method of making sugar from sugarcane was known to the people of Bihar. The
historical evidences of sugar industry prospering in ancient India concrete and this has helped
to develop and prosper the co-operative sugar movement in India.
National Scenario of Sugar Industry
The first sugar mill in the country was set up in 1903 in the United Provinces. There
are 566 installed sugar mills, of which 453 were in operation in the year 2002-03 and utilized
194.4 million ton of sugarcane (69% of total cane production) to produce 20.14 million tons
of sugar. About 5 lakh workmen are directly employed in the sugar. About 5 lakh workmen
are directly employed in the sugar industry besides many in industries, which utilize by-
products of sugar industry as raw material.
India is the largest consumer and second largest producer of sugar in the world. The
Indian sugar industry is the second largest agro-industry located in the rural India. Indian
sugar industry has been a focal point for socio-economic development in the rural areas.
About 50 million sugarcane farmers and a large number of agricultural laborers are involved
in sugarcane cultivation and ancillary activities, constituting 7.5% of the rural population.
Besides, the industry provides employment to about 2 million skilled/semi skilled workers
and others mostly from the rural areas. The industry not only generates power for its own
requirement but surplus power for export to the grid based on by-product–Bagasse. It also
produces ethyl alcohol, which is used for industrial and potable uses, and can be used to the
manufacture Ethanol, an ecology friendly and renewable fuel for blending with petrol.
The sugar industry in the country uses only sugarcane as input, hence sugar
companies have been established in large sugarcane growing states like Uttar Pradesh, Tamil
Nadu, Karnataka, Gujarat, Tamil Nadu, and Andhra Pradesh. In sugar year 2003-04,these six
states contribute more than 85%of total sugar production in the country; Uttar Pradesh, Tamil
Nadu, and Karnataka together contribute more than 65%of total production.
The government of India licensed new units with an initial capacity of 1250 TCD up
to the 1980s and with the revision in minimum economic size to 2500 TCD, the Government
issued licenses for setting up of 2500 TCD plants thereafter. The government de-licensed
sugar sector in the year of 11.September.1988. The entrepreneurs have been allowed to set up
sugar factories of expand the existing sugar factories as per the techno-economic feasibility
of the project. However, they are required to maintain a radial distance of 15 kms from the
existing sugar factory. After de-licensing, a number of new sugar plants of varying capacities
have been set up and the existing plants have substantially increased their capacity.
There are 566 installed sugar mills in the country as on March 31st 2005, with a
production capacity of 180 lack MTs of sugar, of which only 453 are working. These mills
are located in 18 states of the country.
The sector wise break up’s as follows:
Table no-1
Sl. No. Sector No of factories
1. Private 189
2. Public 62
3. Co-operative 315
Total 566
International Scenario of Sugar Industry
Sugar is produced in 110 countries. The leading sugarcane producing countries are
Brazil, India, Australia, Thailand, China and Cuba.
Sugar is extracted from two different raw materials, sugarcane and beet. Both produce
identical refined sugar. Sugarcane is grown in semi-tropical regions, and accounts for around
two-thirds of world accounts for the balance one third of world production. The Russian
Federation, Ukraine and Europe account for around 80 per count of total beet sugar
production. In addition to weather conditions, diseases, insects, and quality of soil,
international trade agreements and domestic price support programmers affect production of
sugarcane and beet.
International Sugar Industry
Demand- Supply
Brazil and India are the largest sugar producing countries followed by China, USA,
Thailand, Australia, Mexico, Pakistan, France and Germany. Global sugar production
increased from approximately 125.88 MMT in 1995-1996 to 149.4 MMT in 2002-2003 and
then declined to 143.7 MMT in 2003-2004, whereas consumption increased steadily from
118.1 MMT in 1995-1996 to 142.8 MMT in 2003-2004 as shown in below given chart. The
word consumption is projected to grow to 160.7 MMT by 2010 and 176.1 MMT by 2015.
The world’s largest consumers of sugar are India, China, Brazil, USA, Russia,
Mexico, Pakistan, Indonesia, Germany and Egypt. According to USDA Foreign Agriculture
Service, the consumption of sugar in Asian countries has increased at a faster rate, as a direct
result of increasing population, increasing per capita income and increased availability.
Diagram no-1
Contribution of Sugar Industry to Indian Economy
Sugar industry contributes about Rs.1650 corers to the Central Exchequer as excise
duty and other taxes annually. In addition, about Rs.600 corers is realized by the State
Governments annually through purchase tax and chess on cane. At the prevailing sugarcane
price, the total sugar cane produced in the country value at about Rs.24000 corers per year.
World Sugar Trade
Word trade in raw sugar is typically around 22 MMT and white sugar around 16
MMT. Brazil is the largest importer, followed by EU, Thailand, Australia and Cuba. The
largest importers are Russia, Indonesia, UK, South Korea, Japan, Malaysia, the Middle East,
and North Africa.
Sugar Prices
World sugar prices fell steadily from 1994-1995 till 1998-1999 and have been almost
stable at those levels. The trend seems to have now reversed and refined sugar prices have
increased by 30% in the last 5 quarters – from 9.16 cents per pound in January, 2004 to 12.02
cents in March,2005 (Source: USDA Foreign Agriculture Services).
Sugarcane Availability
Table showing sugar cane availability in cultivated area:
Table no-2
Year Cultivated area (%) MMT
1980-81 2.7 154
1990-91 - 241
2000-11 - 296
2012-13 4.3 300
Sugarcane occupies about 2.7% of the total cultivated area and it is one of the most
important cash crops in the country. The area under sugarcane gradually increased from 2.7
million hectares in 1980-81 to 4.3 million hectares in 2002-03, mainly because of much
larger diversion of land from other crops to sugarcane by the farmers for economic reasons.
The sugarcane area, however, declined in the year 2003-04 to 3.9 million hectares and to 3.7
million hectares in 2004-05, mainly due to drought and pest attacks. From a level of 154
MMT in 1980-1981, the sugarcane production increased to 241 MMT in 1990-1991 and
further to 296 MMT in 2000-2001. Since then, it has been hovering around 300 MMT until
last year. In the season 2003-2004, however, sugarcane production declined to 236 MMT
mainly due to drought and pest attacks. Not only sugarcane acreage and sugarcane production
has been increasing, even drawal of sugarcane by the sugar industry has also been increasing
over the years. In India, sugarcane is utilized by sugar mills as well as by traditional
sweeteners like guru and khandsari producers. However, the diversion of sugarcane to guru
and khandsari is lower in states of Tamil Nadu and Karnataka, as compared to Northern states
like UP.
SUGARCANE UTILIZATION
Table no-3
Year
% Sugarcane utilization for
White Sugar Guru and
Khandsari
Seed, feed and
chewing
1980-1981 33.4 54.8 11.8
1990-1991 50.7 37.4 11.8
2000-2001 59.7 28.8 11.5
2001-2002 57.4 31.5 11.1
2002-2003 68.9 20.1 11.1
2003-2004 56.1 32.5 11.4
Sugar Production
Most of the sugar in India is manufactured and sold as “White Crystal Sugar” which
is produced by Double Suspiration Process, while the norm in developed and emerging
nations is refined sugar, which is produced by the Phosphoflotation Process.
Most of the mills in India are not equipped to make refined sugar Mills which are
designed to produce refined sugar can manufacture sugar not only from sugarcane but also
from raw sugar which can be imported. Therefore, such mills can run their production all the
year round, as opposed to single state mills, which are dependent upon the seasonal supply of
sugarcane.
Time Office
WORKING HOURS
GENERAL SHIFT 8 AM – 5.30PM
MORNING SHIFT 4 AM – 12.00PM
AFTERNOON SHIFT 12 PM – 8.00PM
LEAVE ENTRIES
CASUAL LEAVE 10 DAYS
SICK LEAVE 8 DAYS
EARNED LEAVE 25 DAYS
PRIVILEGE LEAVE NOT < 3 DAYS AND NOT > 4 DAYS
FINANCE DEPARTMENT
Finance Department hierarchy
Deputy GM (Finance & Accounts)
Officer Cashier
Jr. Officer Cane Accounts Account Asst.
Asst. Cane Accountant
Clerks
Clerks
Accounting Process
Recording the transactions.
Classifying the transactions.
Summarizing the transactions.
Analyzing and interpreting the results.
In this section accounts are maintained. Accounts are maintained in traditional method in this
section accounts are maintained. Accounts are maintained in traditional method
The main functions are
Recording all the accounts including employees and workers salary, their P.F. etc.
It records all the payments of the factory.
It records all the transaction of the factory
INDUSTRY PROFILE
The Historical Background Of The Indian Sugar Industry
The sugar industry is proud to be an industry, which spreads the taste of sweetness to
the mankind. The history of origin of this industry is as old as the history of main him self.
Sugar is generally made from sugarcane and beet. In India, sugar is produced mainly from
sugarcane. India had introduced sugarcane all over the worlds and is a leading country in the
making sugar from sugarcane.
‘Saint Vishwamitra’ is known as the research person of the sugarcane in religious
literature. We can find the example of sugarcane in Vedic literature also as well as sugarcane.
We can also find the reference of sugar and the sugarcane in Patanjali’s Mahabashya and the
treaty on the grammar of ‘Panini’. Greek traveler ‘Niyarchus’ and Chinese traveler ‘Tai-
Sung’ have mentioned in their travelogue that the people of India used to know the methods
of making sugar and juice from sugarcane the great Emperor Alexander also carried
sugarcane with him while returning to his country.
Thus from different historical references and from some ‘Puranas’ it can be concluded
that method of making sugar from sugarcane was known to the people of Bihar. The
historical evidences of sugar industry prospering in ancient India concrete and this has helped
to develop and prosper the co-operative sugar movement in India.
National Scenario of Sugar Industry
The first sugar mill in the country was set up in 1903 in the United Provinces. There
are 566 installed sugar mills, of which 453 were in operation in the year 2002-03 and utilized
194.4 million ton of sugarcane (69% of total cane production) to produce 20.14 million tons
of sugar. About 5 lakh workmen are directly employed in the sugar. About 5 lakh workmen
are directly employed in the sugar industry besides many in industries, which utilize by-
products of sugar industry as raw material.
India is the largest consumer and second largest producer of sugar in the world. The
Indian sugar industry is the second largest agro-industry located in the rural India. Indian
sugar industry has been a focal point for socio-economic development in the rural areas.
About 50 million sugarcane farmers and a large number of agricultural laborers are involved
in sugarcane cultivation and ancillary activities, constituting 7.5% of the rural population.
Besides, the industry provides employment to about 2 million skilled/semi skilled workers
and others mostly from the rural areas. The industry not only generates power for its own
requirement but surplus power for export to the grid based on by-product–Bagasse. It also
produces ethyl alcohol, which is used for industrial and potable uses, and can be used to the
manufacture Ethanol, an ecology friendly and renewable fuel for blending with petrol.
The sugar industry in the country uses only sugarcane as input, hence sugar
companies have been established in large sugarcane growing states like Uttar Pradesh, Tamil
Nadu, Karnataka, Gujarat, Tamil Nadu, and Andhra Pradesh. In sugar year 2003-04,these six
states contribute more than 85%of total sugar production in the country; Uttar Pradesh, Tamil
Nadu, and Karnataka together contribute more than 65%of total production.
The government of India licensed new units with an initial capacity of 1250 TCD up
to the 1980s and with the revision in minimum economic size to 2500 TCD, the Government
issued licenses for setting up of 2500 TCD plants thereafter. The government de-licensed
sugar sector in the year of 11.September.1988. The entrepreneurs have been allowed to set up
sugar factories of expand the existing sugar factories as per the techno-economic feasibility
of the project. However, they are required to maintain a radial distance of 15 kms from the
existing sugar factory. After de-licensing, a number of new sugar plants of varying capacities
have been set up and the existing plants have substantially increased their capacity.
There are 566 installed sugar mills in the country as on March 31st 2005, with a
production capacity of 180 lack MTs of sugar, of which only 453 are working. These mills
are located in 18 states of the country.
The sector wise break up’s as follows:
Table no-1
Sl. No. Sector No of factories
1. Private 189
2. Public 62
3. Co-operative 315
Total 566
International Scenario of Sugar Industry
Sugar is produced in 110 countries. The leading sugarcane producing countries are
Brazil, India, Australia, Thailand, China and Cuba.
Sugar is extracted from two different raw materials, sugarcane and beet. Both produce
identical refined sugar. Sugarcane is grown in semi-tropical regions, and accounts for around
two-thirds of world accounts for the balance one third of world production. The Russian
Federation, Ukraine and Europe account for around 80 per count of total beet sugar
production. In addition to weather conditions, diseases, insects, and quality of soil,
international trade agreements and domestic price support programmers affect production of
sugarcane and beet.
International Sugar Industry
Demand- Supply
Brazil and India are the largest sugar producing countries followed by China, USA,
Thailand, Australia, Mexico, Pakistan, France and Germany. Global sugar production
increased from approximately 125.88 MMT in 1995-1996 to 149.4 MMT in 2002-2003 and
then declined to 143.7 MMT in 2003-2004, whereas consumption increased steadily from
118.1 MMT in 1995-1996 to 142.8 MMT in 2003-2004 as shown in below given chart. The
word consumption is projected to grow to 160.7 MMT by 2010 and 176.1 MMT by 2015.
The world’s largest consumers of sugar are India, China, Brazil, USA, Russia,
Mexico, Pakistan, Indonesia, Germany and Egypt. According to USDA Foreign Agriculture
Service, the consumption of sugar in Asian countries has increased at a faster rate, as a direct
result of increasing population, increasing per capita income and increased availability.
Diagram no-1
Contribution of Sugar Industry to Indian Economy
Sugar industry contributes about Rs.1650 corers to the Central Exchequer as excise
duty and other taxes annually. In addition, about Rs.600 corers is realized by the State
Governments annually through purchase tax and chess on cane. At the prevailing sugarcane
price, the total sugar cane produced in the country value at about Rs.24000 corers per year.
World Sugar Trade
Word trade in raw sugar is typically around 22 MMT and white sugar around 16
MMT. Brazil is the largest importer, followed by EU, Thailand, Australia and Cuba. The
largest importers are Russia, Indonesia, UK, South Korea, Japan, Malaysia, the Middle East,
and North Africa.
Sugar Prices
World sugar prices fell steadily from 1994-1995 till 1998-1999 and have been almost
stable at those levels. The trend seems to have now reversed and refined sugar prices have
increased by 30% in the last 5 quarters – from 9.16 cents per pound in January, 2004 to 12.02
cents in March,2005 (Source: USDA Foreign Agriculture Services).
Sugarcane Availability
Table showing sugar cane availability in cultivated area:
Table no-2
Year Cultivated area (%) MMT
1980-81 2.7 154
1990-91 - 241
2000-01 - 296
2002-03 4.3 300
2003-04 3.9 -
2004-05 3.7 236
Sugarcane occupies about 2.7% of the total cultivated area and it is one of the most
important cash crops in the country. The area under sugarcane gradually increased from 2.7
million hectares in 1980-81 to 4.3 million hectares in 2002-03, mainly because of much
larger diversion of land from other crops to sugarcane by the farmers for economic reasons.
The sugarcane area, however, declined in the year 2003-04 to 3.9 million hectares and to 3.7
million hectares in 2004-05, mainly due to drought and pest attacks. From a level of 154
MMT in 1980-1981, the sugarcane production increased to 241 MMT in 1990-1991 and
further to 296 MMT in 2000-2001. Since then, it has been hovering around 300 MMT until
last year. In the season 2003-2004, however, sugarcane production declined to 236 MMT
mainly due to drought and pest attacks. Not only sugarcane acreage and sugarcane production
has been increasing, even drawal of sugarcane by the sugar industry has also been increasing
over the years. In India, sugarcane is utilized by sugar mills as well as by traditional
sweeteners like guru and khandsari producers. However, the diversion of sugarcane to guru
and khandsari is lower in states of Tamil Nadu and Karnataka, as compared to Northern states
like UP.
SUGARCANE UTILIZATION
Table no-3
Year
% Sugarcane utilization for
White Sugar Guru and
Khandsari
Seed, feed and
chewing
1980-1981 33.4 54.8 11.8
1990-1991 50.7 37.4 11.8
2000-2001 59.7 28.8 11.5
2001-2002 57.4 31.5 11.1
2002-2003 68.9 20.1 11.1
2003-2004 56.1 32.5 11.4
Sugar Production
Most of the sugar in India is manufactured and sold as “White Crystal Sugar” which
is produced by Double Suspiration Process, while the norm in developed and emerging
nations is refined sugar, which is produced by the Phosphoflotation Process.
Most of the mills in India are not equipped to make refined sugar Mills which are
designed to produce refined sugar can manufacture sugar not only from sugarcane but also
from raw sugar which can be imported. Therefore, such mills can run their production all the
year round, as opposed to single state mills, which are dependent upon the seasonal supply of
sugarcane.
Conclusion
India is a largest consumer of sugar in the world and second largest manufacturer of
sugar followed by China, USA, Thailand, Germany, and Pakistan. In the sugar industry the
top position is Brazil as it is a world largest manufacturer of sugar. As seeing the
consumption of sugar the India is having a big market for sugar industry. As it is a large-scale
industry it provides large profit for the country and it can also be helpful for development of
industrial infrastructure. India is a world’s largest consumer and second largest
manufacturing of sugar so the sugar must be cheaper. It can be provide by our sugar industry.
“A STUDY ON CAPITAL STRUCTURE AT ARIGNAR ANNA SUGAR
MILLS LTD.”
OBJECTIVES
1) To know the meaning definition and methods of Capital Structure.
2) To determine whether acquired capital asset is viable or not.
3) To find out the Post Payback Profitability.
4) To find out the Accounting Rate of Return on investment.
5) To know the Net Present Value.
6) To find out the Internal Rate of Return on investment.
7) To know the Profitability Index.
SCOPE OF THE STUDY
The study under taken on Capital Structure decisions at Arignar Anna (distillery and
chemicals division) helps in the evaluation of the Capital Structure decisions already taken
and to be take in future. The study will cover the different methods used for the Capital
decisions and their viability, their payback or return on the investment.
LIMITATIONS
Considering the scope mentioned above, some or few limitations are arising. That is
Arignar Anna Sugar Mills Ltd is big organization. Its finance and accounts department is also
big departments. But due to shortage of information providing, I am concentrating on
equations as per information given by the finance and accounts department.
TECHNIQUES OF INVESTMENT ANALYSIS
Techniques of investment analysis in one of the important functions of the financial
management the funds are raised through the primary market, secondary market, capital
market and money market by selecting the appropriate instrument which would help the
organization to starts its activities on the expected lines. The cast is recovered and margin is
kept for the risk the promoter under takes. This kind of planning of funds with an forecasted
profits are earned only by analyzing the various investment alternatives available to him.
Generally investments are made on fixed assets and as well as current assets. These assets
structure have to be build scientifically, to earn sufficient profits to meet the objectives.
INVESTMENT DECISIONS
This is a decision based on risk and uncertainty. He has to evaluate the investment
praposuals in relation of their expected rate of risk and returns. The process which defferent
projects are evaluated is known as ‘Capital Structure’.
The profit cost and cash inflows of the projects are compared and best projects are
selected for the purpose of investment.
CAPITAL STRUCTURE
The project planning is a process by which companies allocate the funds to the
various investment projects designed to ensure the growth and profitability.
Capital Structure refers to planning the devide of available capital for the purpose of
maximizing the long term profitability of the firm.
Definitions of the Capital Structure
“Capital Structure is long term planning for making and financing proposed capital
outlays”. By Charles T Horngreen.
Capital Structure consists in planning, dividing of available capital for the purpose of
maximizing the long term profitability of the concern.
METHODS OF CAPITAL STRUCTURE
The Capital Structure techniques or evaluation of investment proposals have
considerably gained the importance. This is more true in the modern business environment.
After introduction of new economic policy, the environment in the industry and service sector
have considerably changed. Number of mergers, acquisitions and joint ventures.
There are methods for evaluating or ranking the capital investment proposals. It has
mainly two methods.
TRADITIONAL METHODS
PAY BACK PERIOD METHOD.
POST BACK PROFITABILITY METHOD.
ACCOUNTING RATE OF RETURN METHOD.
DISCOUNTED CASH FLOW METHODS
THE NET PRASENT VALUE METHOD
INTERNAL RATE OF RETURN METHOD
PROFITABILITY INDEX METHOD
TRADITIONAL METHODS
PAYBACK PERIOD METHOD
The term payback period refers to the period in which the project give the necessary
cash to recover the initial investment. It is a traditional, simple method of evaluate the
projects. It does not take the effect of time value of money. Cash flows refer to profit before
depreciation and after tax.
MERITS
1) It is a old method and traditional one.
2) It involves simple calculations
3) It is the best method for evaluating high risk projects.
4) The Results obtained under this method is more reliable.
DEMERITS
1) It is based on the principle ‘rule and thumb’.
2) It does not recognize the importance of ‘time value of money.
3) It does not recognize the pattern of cash flows and its timing.
POST PAYBACK PROFITABILITY METHOD
To remove the drawbacks of payback period, the post payback profitability method
was developed. The cash inflow generated from a project during the life of the project. As
payback period the cash flow were considered only to the extend of recovering the
investment. But in practical, after the recovery of pay back period the project can capable to
generate the cash inflows or not. Therefore, to evaluate the project the entire amount of cash
inflows.
MERITS
1) It is based on simple calculations.
2) It takes less time consuming.
3) It is easy to follow and even ordinary man can also understand
DEMERITS
1) It is also based on principle of “rule and thumb”.
2) It doesn’t consider the impact of time value of money.
3) It ignores depreciation.
ACCEPT OR REJECT CRITERION
The pay back period can be used as an accept or reject criterion. It can also be used as
a method of ranking project. If the pay back period calculated for a project is less than the
maximum payback period set up by the management. It would be accepted project whose
actual payback period is more than what has been pre-determined by the management.
ACCOUNTING RATE OF RETURN:
Accounting Rate of Return considers life time the earnings of the project. This
method is based on conventional accounting concepts. The Rate of Return is expressed as
percentage of the earnings. This method has been introduced to over come the dis-advantage
of payback period. The profit under this method is calculated as profit after depreciation and
tax.
Formulae:
Average annual income (after depreciation and tax)
ARR = Initial Investment x 100
Total cash inflows
Average annual income = No of Years
As ARR is commonly accepted in assessing the profitability of capital expenditure.
Because the method does to consider the heavy cash inflow during the project period. As the
earnings with averaged.
Accept or Reject criterion
Under this method, all project, having Accounting Rate of Return higher than the
minimum rate determined by management will be consider and those having ARR less than
pre determined rate. This method ranks a project as number one. If it has highest ARR, and
lowest rank is assigned to the project with the lowest ARR.
MERITS
1) It is very simple to understand and use.
2) This method takes into account saving over the entire life of the project.
3) This method through the concept of “net earnings”.
4) It can be readily by calculated by using the accounting data.
DEMERITS
1) It ignores time value of money.
2) It does not consider the length of life of the project.
3) It does not consistent with the firm’s objective of maximising the market value of
shares.
4) It ignores the fact that the profits earned can be reinvested.
DISCOUNTED CASH FLOW METHODS
Discounted cash flow method is improved over pay back method and ARR. An
investment is essential out flow of funds aiming at percentage of rate of return. This method
includes the following methods.
NET PRESENT VALUE METHOD
Net present value method recognizes the impact of time value of money. It is
considered as the best method of evaluating the Capital Structure proposals. It is widely used
in practice. The cash inflow to be received at different period of time will be discounted at a
particular discount rate. The present value of cash inflows are compared with the original
investment. The difference between the two will be used for accept or reject criterion.
MERITS
1) It recognizes the time value of money.
2) It considers the cash flow of the entire life.
DEMERITS
1. The NPV method is based on discount rate. In a real life situation, it is very
difficulty to find and understand the concept of cost of capital.
2. It may not give reliable answer when dealing with alternative projects under of
anequal lives of project.
INTERNAL RATE OF RETURN METHOD
IRR is that rate at which the sum of discounted cash inflow equals the sum of
discounted cash out flow. It is that rate at which NPV of the investment is zero. This method
is advised by Joel dean. This method is also known as
a) marginal efficiency of capital
b) Rate of Return on Investment
c) Time adjusted Rate of Return.
ACCEPT OR REJECT CRETERION
Accept the project if the internal rate of return is higher than or equal to minimum
required rate of return is also known as cut-off rate.
Calculation of IRR
Factor = Initial Investment
Average cash flow
IRR = A+(C − O) * (B−A)
(C − D)
MERITS
1) It considers the time value of money.
2) Calculation of cost of capital is not a prerequisite for adopting IRR.
3) It considers cash inflows throught the life of the project.
DEMERITS
1) Computation of IRR is tedious and difficulty to understand.
2) Both NPV and IRR assume that the cash inflows can be reinvested at the
discounting rate in the new projects.
PROFITABILITY INDEX
Profitability index is a conceptually sound method of appraising investment projects.
It provides ready comparison between investment proposals of different investment proposals
of different magnitudes. Project can be ranked on the bases of profitability index.
PROFITABILITY INDEX = P V of Cash Inflow
Initial investment.
DISTILERY AND CHEMICALS DIVISION
Year EBIT&D Interest
@12.25%
EBT&D Depreciation EBT
2007-08 7829.24 959.08 6870.16 336.22 6533.94
2008-09 6455.93 790.85 5665.08 359.20 5305.88
2009-10 5502.78 674.09 4828.69 416.42 4412.27
2010-11 8456.91 1035.97 7420.94 438.03 6982.91
2011-12 7199.94 881.99 6317.95 477.65 5840.30
Tax@35% EAT &Depre. EAT +Depre
2286.88 4247.06 4583.28
1857.06 3448.82 3808.02
1544.29 2867.98 3284.40
2440.02 4538.89 4976.92
2044.11 3796.20 4273.85
18898.95 20926.47
TRADITIONAL CASH FLOW METHODS
PAY BACK PERIOD METHOD:
(Rs in Lakhs)
YEAR CASH INFLOWS CUMILATIVE
2007-08 4583.28 4583.28
2008-09 3448.82 8032.10
The initial investment is Rs 6666.98 lakhs. The first year cash inflow is Rs 4583.28
lakhs. The second year cash inflow is Rs 3448.82 lakhs. The cash flow need only 6666.98 –
4583.28 = 2083.16 lakhs for recovery of the initial investment.
PAY BACK PERIOD = REMAINING CASH FLOW ∕ 2ND YEAR CASH FLOW
= 2083.16 ∕ 3448.82
= 0.604 year.
PAY BACK PERIOD = 1.604 YEARS.
Analysis:
For the 5 years period from 2004-05 to 2008-09 the above calculation the pay back
period is very low that is 1.604 years. So the investment was recovered early.
POST PAY BACK PROFITABILITY METHOD
(Rs in Lakhs)
The cash inflow during 2004-05 to 2008-09 20,926.47.
(4583.28+ 3808.02+ 3284.40+ 4976.92+ 4273.85)
Less: Initial investment 06,666.98
POST PAYBACK PROFITABILITY 14,259.49
Analysis:
For the 5 years period from 2004-05 to 2008-09 the above calculation the post
payback profitability is very high that is 14259.49 lakhs. So the project is more profitable
one.
ACCOUNTING RATE OF RETURN METHOD
ARR = Average annual income after tax and depre’n. X 100
Initial investment
Average annual income = Total income
No of years
Average income = 4247.06+ 3448.82+2867.98+4538.89+3796.20
5
Average income = 18898.95
5
Average income = 3779.79.
ARR = 3779.79 X 100
6666.98
ARR = 56.94%
Analysis:
For a 5 years period from 2004-05 to 2008-09, the above calculation the ARR works
out to be 56.94%. This indicates that the company is having high rate of return.
DISCOUNTED CASH FLOW METHODS
NET PRESENT VALUE:
Year Discounting factor
@ 17%
Cash inflows P V of cash inflows
2007-08 0.855 4247.06 3631.24
2008-09 0.731 3448.82 2521.09
2009-10 0.625 2867.98 1792.49
2010-11 0.534 4538.89 2423.76
2011-12 0.457 3796.20 1734.86
PRASENT VALUE 12103.44
Less: Initial Investment 06666.98
NET PRESENT VALUE 5436.46
Analysis:
For a 5 years period from 2004-05 to 2008-09, the above calculation the NPV is very
high that is 5436.46 lakhs. It indicates the value of the is high.
INTERNAL RATE OF RETURN METHOD: (Rs in lakhs)
Initial investment
FACTOR = Average cash inflow
Average cash inflow = Total cash inflows
No of years
Average cash inflows = 4247.06+3448.82+2867.98+4538.89+3796.20
5
Average cash inflows = 18898.95
5
Average cash inflows = 3779.79
FACTOR VALUE = 6666.98
3779.79
FACTOR VALUE = 1.76
Calculation of present value of cash inflows
Year Cash inflows
Discounting factor@40%
P V of CIF@40%
Discounting factor@50%
P V of CIF@50%
2007-08 4247.06 0.714 3032.40 0.667 2022.61
2008-09 3448.82 0.510 1758.90 0.444 1531.28
2009-10 2867.98 0.364 1043.95 0.296 848.92
2010-11 4538.89 0.260 1180.11 0.198 898.70
2011-12 3796.20 0.186 699.40 0.132 501.10
7714.76 5802.61
IRR = A + C – O X (B-A)
C - D
Where, A = 40
B = 50
C = 7714.76
D = 5802.61
O = 6666.98
7714.76 – 6666.98 X (50 - 40)
IRR = 40 + 7714.76 – 5802.61
IRR = 40 + 1047.78 X 10
1912.15
IRR = 40 + 5.48
IRR = 45.48.
Analysis:
For a 5 years period from 2004-05 to 2008-09, the IRR works out to be 45.48. This is
good for the company.
PROFITABILITY INDEX METHOD
Year Discounting
factor @ 17%
Cash inflows P V of cash inflows
2007-08 0.855 4247.06 3631.24
2008-09 0.731 3448.82 2521.09
2009-10 0.625 2867.98 1792.49
2010-11 0.534 4538.89 2423.76
2011-12 0.457 3796.20 1734.86
TOTAL P V of CIF 12103.44
Present value of CIF
PROFITABILITY INDEX = Initial investment
12103.44
PROFITABILITY INDEX = 6666.98
PROFITABILITY INDEX = 1.15
Analysis:
For a 5 years period from 2004-05 to 2008-09, the above calculation the profitability
index or cost- benefit ratio is 1.15. So the project is viable.
Findings
1. Since the capital invested in the assets are recovered within a short period of 1.60
year. The proposal is viable to the company.
2. Post pay back profitability is Rs.14259.49 lakhs.
3. Accounting Rate of Return is 56.94%
4. Since the Net Present Value is positive the project is financially viable.
Suggestions
Even though the distillery and chemicals division have high potentiality to earn huge profits,
the company is not giving the importance to the division continuously. The company is
giving the importance to 1 division among 3 divisions. Here they are neglecting the
importance of other two divisions for the year. This is resulted in high fluctuations on cash
inflows for the company. Here the company may work on the area and improve the
company’s profitability.
CONCLUSION
The Arignar Anna Sugar Mills was located at Kurungulam. It is a small village in
Thanjavur district. It was established in the year 1971-72. The company achieved high
crushing of sugar cane session in the year 2005-06 that is 16,39 424 tones. The present year
2011-12 it crushed sugar cane at 17, 44,267 tones. The company also celebrated in company
premises and award given who are directly involved in this achievement.
The Distillery and Chemicals division was established in the year 1984-85. The
Distillery division started working initially 30000 Ltrs. It has some by-products. that are
Ethyle Actate, Bhoomilabha, SOC etc.
The Capital Structure means the capital project planning is a process by which
companies allocate funds to various investment projects to ensure the profitability and
growth. The Capital Structure mainly has two methods, first, Discounted cash flow methods
and second one is traditional cash flow methods.
The Distillery and Chemicals division’ at Arignar Anna Sugars Ltd, performance is
very well in turns high Net Present Value early recovery period of initial investment. So the
Distillery and Chemicals division performing very well.
BIBLIOGRAPHY
References:
1) Financial Management
BY- D B KULKARNI.
P V SATYAPRASAD.
2) FINANCIAL MANAGEMENT
BY- I M PANDE
3)TASCO-Web Site
Annexure
Calculation of Weighted Average Cost of Capital [WACC]
(RS IN LAKHS)
SOURCES AMOUNT PRAPORTION COST WACC
EQUITY
SHARES
2748,25 0.0590 0.375 0.02212
PREFERENCE
SHARES
1800.00 0.0390 0.120 0.00468
LOANS 36238.18 0.7829 0.1225 0.09591
RETAINED
EARNINGS
5500.07 0,1188 0.375 0.04455
46286.50 0.16726
Cost in % = 16.73 OR 17.
CALCULATION OF INVESTMENT FOR THE YEAR 2004-05
Net Assets on 31st march 2005 = 19330.71
Cash inflow of Distillery and Chemicals Division = 14140.36
2004-05
Total Cash Inflow of Arignar Anna Sugar Mills is = 40999.54
Investment in the year 2004-05 = Net Assets X CIF of Distillery and Chemicals
Total CIF of GSM.
Investment = 19330.71 X 14140.36
40999.54
Investment = 6666.98.