Date post: | 17-Jan-2016 |
Category: |
Documents |
Upload: | chad-flowers |
View: | 214 times |
Download: | 0 times |
Practical skills on the topic:The study and evaluation of the intensity of the noise and vibration
The Aim:
This type of research is carried out in a production environment, and if necessary - in other objects (settlements, housing, child care, etc.).
For measurements required device
ISHV-1 (VSV-003M-2 shumovibrometr or other types)
Algorithm of :
1. Place the microphone in the workplace (or vibration sensor on a vibrating surface)
2 Measure the intensity of the noise (vibration) in dBA
- Set the dial to "sound", a kind of measurement - "lin" kind of work "quickly"
- Reading the device according to the results of at least 3 measurements to calculate the average value
3 Measure the noise spectrum (vibration) :?
kind of measurement - to "filter". Switch frequency - successively 16, 32, 64, etc.
4-insert measurement results in the protocol?
5 Rate data obtained taking into account the specified remote noise or vibration, depending on the studied object.?