Úřad pro technickou normalizaci, metrologii a státní zkušebnictvíCzech Office for Standards, Metrology and Testing
Construction products
-
the way from a manufacturer to the incorporation into
building on the market in the Czech Republic
Sarajevo Božena Musilová
Sarajevo Božena Musilová 2009-11-03
the act of its incorporation into building works
the act of placing of the product on the Single EU market
X
Sarajevo Božena Musilová 2009-11-03
The principle of subsidiarity
a fundamental principle of European Union law (established in the 1992 Treaty of Maastricht)
decisions are taken as closely as possible to the citizen (national, regional or local level)
the EU may only act (i.e. make laws) where member states agree that action of individual countries is
insufficient
Sarajevo Božena Musilová 2009-11-03
Division of powers
Czech Office for Standards, Metrology and Testing
Ministry for Regional Development
Czech Trade Inspectorate
ČOI (CTI)
Sarajevo Božena Musilová 2009-11-03
Czech Office for Standards, Metrology and Testing (COSMT)
Tasks set out in Czech legislation on technical standardisation, metrology and testing
Monitoring of the development of EC law with aim to initiate the updating of Czech law
Notifying Authority
Contact point - Directive 98/34/EC (Central Unit for the CzechRepublic)
The Standing Committee on Construction (Ms. Šimková - Head of the Czech Delegation to SCC)
Sarajevo Božena Musilová 2009-11-03
COSMT is a budgetary organisation subordinated to the Ministry of Industry and Trade.
Standards Department
takes the responsibility for the development, publication and distribution of Czech standards (CSN)
ensures co-operation with international and European standards organizations (ISO, IEC, CEN, CENELEC, ETSI)
Sarajevo Božena Musilová 2009-11-03
Testing Department
Act No. 22/1997 Coll., on Technical Requirements forProducts and on Amendments to Some Acts, asamended, that lay down technical requirements for
products
Construction products
Government Order No. 190/2002 Coll.,
Government Order No. 163/2002 Coll.
Sarajevo Božena Musilová 2009-11-03
Construction Products Directive – CPDCOUNCIL DIRECTIVE 89/106/EEC
of 21 December 1989 on the approximation of laws, regulations and administrative provisions of the Member States relating to
construction products as amended by Council Directive 93/68/EC
the requirement to transpose the provisions of the directives into their national legislation
Government Order
Sarajevo Božena Musilová 2009-11-03
COUNCIL DIRECTIVE 89/106/EEC
„in the absence of harmonized standards and European technical approvals, national or other non-harmonized
technical specifications may be recognized as providing a suitable basis for a presumption that the essential
requirements are met“
Sarajevo Božena Musilová 2009-11-03
Essential Requirements
The products must be suitable for construction works which (as a whole and in their separate parts) are fit for
their intended use and in this connection satisfy the following essential requirements:
Mechanical resistance and stability Safety in case of fire
Hygiene, health and the environment Safety in use
Protection against noise Energy economy and heat retention
Sarajevo Božena Musilová 2009-11-03
Government Order No. 190/2002 Coll.,that lays down technical requirements for construction
products bearing the CE marking, as amended by 251/2003 Coll., and Government Order No. 128/2004
Coll.
Government Order No. 163/2002 Coll.that lays down the technical requirements for selected
construction products as amended by Government Order No. 312/2005 Coll.
Sarajevo Božena Musilová 2009-11-03
Government Order No. 190/2002 Coll.
This Order applies to construction products if requirements for such construction products are laid
down by
harmonized technical standardsEuropean technical approvals
recognized national standards relating to this Order
Sarajevo Božena Musilová 2009-11-03
Government Order No. 163/2002 Coll.
that lays down the technical requirements for selectedconstruction products as amended by GovernmentOrder No. 312/2005 Coll.)
This Order does not apply to products the conformityassessment of which is set out by a special legalregulation in a different way (Government Order No.190/2002 Coll., construction products bearing the CEmarking).
Sarajevo Božena Musilová 2009-11-03
Construction products for concrete and reinforced concrete parts ofconstruction worksConstruction products for masonry worksConstruction wood and timber products and timber constructionsConstruction products for metal constructionsProtective, thermal and sound insulating materials and products,waterproofing materials, roof coverings and adhesivesConstruction glass productsConstruction products for waste water engineering and liquid andgas distribution systemsConstruction products for opening closuresSpecial materials, products, structures and equipmentTechnical equipment of buildingsConstruction products for internal and external wall, ceiling andfloor finishesConstruction products for sanitary appliances
Sarajevo Božena Musilová 2009-11-03
http://web.unmz.cz/psv/
the list of standards related to particular government orders is in the Czech language
list of Authorized and Notified Bodies (detailed information including the contacts)
technical requirements for construction products (monitors the development of EC law, Czech law,
Slovak law)
useful information (websites)
Sarajevo Božena Musilová 2009-11-03
3. Construction wood and timber products and timber constructions
AoCProduct groupItem
Sarajevo Božena Musilová 2009-11-03
ČSN EN 13986: Wood-based panels for use inconstruction - Characteristics, evaluation of conformityand marking
Sarajevo Božena Musilová 2009-11-03
ČSN EN 13986: Wood-based panels for use inconstruction - Characteristics, evaluation of conformityand marking
Applicability date
Sarajevo Božena Musilová 2009-11-03
ČSN EN 13986: Wood-based panels for use inconstruction - Characteristics, evaluation of conformityand marking
Co-existence period end date
Sarajevo Božena Musilová 2009-11-03
ČSN EN 13986: Wood-based panels for use inconstruction - Characteristics, evaluation of conformityand marking
Notified Bodies
Sarajevo Božena Musilová 2009-11-03
ČSN EN 13986: Wood-based panels for use inconstruction - Characteristics, evaluation of conformityand marking
Assessment of Conformity
Sarajevo Božena Musilová 2009-11-03
ČSN EN 13986: Wood-based panels for use inconstruction - Characteristics, evaluation of conformityand marking
Mandate to CEN/CENELEC
Sarajevo Božena Musilová 2009-11-03
ČSN EN 13986: Wood-based panels for use inconstruction - Characteristics, evaluation of conformityand marking
Commision Decision
Sarajevo Božena Musilová 2009-11-03
Ministry for Regional Development(www.mmr.cz)
provisions on the design and execution of constructionworks in the Czech Republic
is the central stateadministration authority fortown and country planningand Building Regulations
Sarajevo Božena Musilová 2009-11-03
Building Act: ActNo. 183/2006 Coll.,on town and countryplanning andbuilding code , asamended
related RegulationNo. 268/2009 Coll.,on technicalrequirements forconstruction
Sarajevo Božena Musilová 2009-11-03
Building offices
provides information for procurement of planning materials and the planning documentation
performs other activities pursuant to the Building Act
issues the planning permission
issues the planning approval
Sarajevo Božena Musilová 2009-11-03
Regulation No. 268/2009 Coll., on technicalrequirements for construction
defines particular types of structures, determines areatechnical requirements for structures and their location,general safety and utility requirements for structures (firesecurity, healthcare, environmental protection,….)
shall be respected when making and procuring theplanning documentation and planning materials,designing, locating, permitting or notifying, carrying out,inspecting, using and removing the structures and whenexercising the state building supervision
Sarajevo Božena Musilová 2009-11-03
Market Surveillance
only safe products can be placed on the Community market
is in responsibility of Member States
General Product Safety Directive (non-food consumer product
Sarajevo Božena Musilová 2009-11-03
Czech Trade Inspectorate(www.coi.cz)
inspection body
cooperation with national inspection bodies of the EUstates (AdCo CPD)
professional cooperation on the methodical field(COSMT, the Ministry of Industry and Trade)
Sarajevo Božena Musilová 2009-11-03
Technical requirements forconstruction products
The designer of the building should especially know:
National provisions on thedesign and execution ofconstruction works
Sarajevo Božena Musilová 2009-11-03
Building Act No.
183/2006 Coll.
Regulations
ČSN EN Eurocodes
Nationalstandards
ČSN
National provisions on the design and execution of construction works
Sarajevo Božena Musilová 2009-11-03
Technical requirements for construction products
Act No. 22/1997
Coll.
Government Order No. 190/2002
Coll.
Government Order No. 163/2002
Coll.
ETA, ETAG
National Standards
European harmonised Standards
Sarajevo Božena Musilová 2009-11-03
Eurocodes
common structural rules for the design of buildingsand civil engineering structures
a series of 10 European Standards, EN 1990 – EN1999 (May 2007)
in 2010 any conflicting National Standards should bewithdrawn
CEN Technical Committee 250 (CEN/TC250)"Structural Eurocodes".
Sarajevo Božena Musilová 2009-11-03
Implementation of Eurocodesin the Czech Republic
presently ČSN EN Eurocodes or original Czech nationalstandards ČSN may be applied for the design of structures inthe Czech Republic
the last two parts of Eurocodes were nationally implementedin 02/2009
Eurocodes will be applied for the design of constructionworks in the Czech Republic from 04/2010.
CR is in the first place of all CEN Member States regardinguploading of the NDPs to the database of JRC.
Sarajevo Božena Musilová 2009-11-03
the largest and most importantresearch centre of the CzechTechnical University
is the co-ordinator and leadingpartner in the international project(Transfer of innovations provided inEurocodes, 2008-2010)
Klokner Instituteof the Czech Technical University in Prague
Sarajevo Božena Musilová 2009-11-03
The Czech experts
prof. Holický, Ms Markova - Czech Republic, Memberof ENC group (Eurocodes national Correspondent
Group)
are actively participating in the implementation ofEurocodes in the Czech Republic
are regularly attending the meetings of the Technicalcommittee CEN/TC 250 and its subcommittees wherethe Czech comments are presented and workingmaterials are discussed
Czech Office for Standards, Metrology and Testing
Thank you for your attentionBožena Musilová