CNC BRIDGE MILLAwea CNC Bridge Type Vertical Machining Center Model SP3016, S/N 1362 (2005), 4000 RPM, 59” x 128” Work Table, 63” Between Housings, 120”X / 63”Y / 30”Z Travels, 22,000 lb. Table Load Capacity, 35 HP BT50 Spindle, 4-Axis Interface, Helical Interpolation, 22” Rotary Table (New 2001) with Bloom Laser Accessory, Coolant, Fanuc 18-M CNC Control
CNC TURNING CENTERSHardinge Conquest T42SP Super Slant Bed Precision CNC Turning Center Model SG-42, S/N SGA-1649-B (1998), Spindle Speeds to 8000 RPM, 12 Position Turret with Live Tool Positions, Sub-Spindle, Parts Catcher, Coolant, GE Fanuc Series 18-T CNC ControlsHardinge Talent 10/78L CNC Turning Center, S/N BLFA001 (2007), 23.38” x 22” Capacity, 10” 3-Jaw Chuck, 12 Live Tool Turret, Coolant, Tailstock, Fanuc CNC ControlHardinge Talent 8/52SV CNC Chucking Turning Center Model SV200, S/N BLAB7A0013, 8.25” 3-Jaw Chuck, 12 Live Tool Turret, Coolant, Tailstock, Fanuc CNC ControlMori Seiki CNC Lathe Model SL-4A, S/N 1011, 21.6” Max. Swing x 24” Centers, 10” 3-Jaw Chuck, 8 Position Turret, Tailstock, Chip Conveyor, Coolant, Fanuc 6-T CNC
CNC HORIZONTAL MACHINING CENTEROkamoto CNC Horizontal Machining Center Model HMC-3000, S/N HRMC-3000NO5M/6, 40-Station ATC, 31.5” x 118” Work Table with 30” x 118” Travel, Coolant, Fanuc 6-M CNC Control
CNC VERTICAL MACHINING CENTERSHardinge/Bridgeport CNC Vertical Machining Center Model VMC1500XP, S/N 204LB066 (2006), 30 Position ATC, 30” x 60” Work Table, 59”X / 27.5”Y / 24”Z, Fanuc Series 18i-MB CNC ControlHardinge CNC Precision Vertical Machining Center Model MC1000-II, S/N NVC-843 (2005), Twin 24 Position ATCs, 20” x 44” Table, 40”X / 20”Y / 20”Z Travels, Coolant, Chip Conveyor, Fanuc 18i-MB CNC ControlsHardinge CNC Precision Vertical Machining Center Model MC1000-II, S/N NVC-833 (2005), 24 Position ATC, 20” x 44” Table, 40”X / 20”Y / 20”Z Travels, Coolant, Chip Conveyor, Fanuc 18i-MB CNC ControlsHardinge CNC Vertical Machining Center Model VMC1000-II, S/N NVC800 (2004), Spindle Speeds to 8000 RPM, 20” x 44” Table, 40”X / 20”Y / 20”Z Travels, 4th Axis Rotary Table, 20 Position ATC, Coolant, Chip Conveyor, Fanuc Series 18i-MB Control(2) Hardinge Special High Performance Series CNC VMCs Model VMC800-II, S/Ns NVB403, NVB387 (both 2001), Spindle Speeds to 12,000 RPM,20.5” x 44” Table, 31.5”X / 20”Y / 20”Z Travels, Troyke 10” 4th Axis Rotary Indexer, Coolant, Chip Conveyor, (1) Fanuc 18i-MB & (1) Fanuc 18-M Controls
CNC VERTICAL MACHINING CENTERS (continued)Mazak Traveling Column CNC Vertical Machining Center Model VTC-20B, S/N 118132, 24 Station Automatic Tool Changer, Renishaw M12 Infrared Probe System, 20” x 57.5” Work Table, Coolant, Mazatrol M32B CNC ControlMazak Traveling Column CNC Vertical Machining Center Model VTC-16A, S/N 132408 (1998), 24 Station Automatic Tool Changer, 16” x 35.5” Table, 22”X / 16”Y / 20”Z Travels, Chip Conveyor, Coolant, Mazatrol M Plus CNC ControlMatsuura 4-Axis CNC Vertical Machining Center Model MC2000V, S/N 82022557, 40 Station Automatic Tool Changer, 30” x 82.5” Table, 80”X / 30”Y / 30”Z Travels, Coolant, Fanuc 6-M CNC ControlMatsuura 5-Axis CNC Vertical Machining Center Model MC-760V, S/N82022508,25 Station Automatic Tool Changer, 16” x 45” Table, 30”X / 16”Y / 19”Z Travels, Coolant, Fanuc 9 CNC Control
CNC MILLING MACHINESTrak South Western Industries 3 HP CNC Variable Speed Vertical Milling Machine Model DPM, S/N 99-4804, 10” x 50” Table, 6” Quill Travel, Heavy Duty Box Column Construction, 4200 RPM, SWI Proto-Trak A.G.E. 3 CNC Controls, Power Draw BarTrak South Western Industries 5 HP CNC Vertical Milling Machine Model DPMV5, S/N 4703 (2005), 160 to 4000 RPM, 20” x 40” Work Table, Proto-Trak VM CNC ControlSport CNC Variable Speed Vertical Milling Machine Model K4, S/N 14BN11541, 10” x 50” Power Feed Table, 4200 RPM, SWI Proto-Trak M-2 2-Axis Control, Power Draw Bar
ENGINE LATHES • VERTICAL TURRET LATHEPoreba 36” x 24’ Geared Head Gap Bed Engine Lathe Model TPK90-6M, S/N 0481-1179-727, 8 - 800 RPM, 18” Dia. Chuck, Steady Rest, Carriage with Cross Slide, Threading, Tailstock, Taper Attachment, Trax DRO, CoolantHES 30” x 16’ Geared Engine Lathe Model Jupiter 830D, S/N 46130, 10 - 1600 RPM, 15” Dia. Chuck, Carriage with Cross Slide, Taper Attachment, Steady Rests, Tailstock, Coolant, DRO Toolmex 24” x 80” Geared Engine Lathe Model TUR630M/80, S/N 51360, 1800 RPM, Chuck, Carriage with Cross Slide, Threading, Tailstock, CoolantToolmex 24” x 80” Geared Engine Lathe Model TUR630M-1630A-80, S/N 50888, 1800 RPM, Chuck, Carriage with Cross Slide, Taper Attachment, Threading, Tailstock, Coolant, DROSharp 10” x 20” Precision Engine Lathe Model 1118H, S/N CTL-1306 (2000), Collet Closer, 8000 RPM, Carriage with Cross Slide, Inch/mm Threading, DROVulcan 63” Vertical Turret Lathe Model 63-40A, S/N 80-57-10-13, 63” Swing, 40” Under Rail, 5 Position Turret Head, Right Side Head, Lube System, Bausch & Lomb Acu-Rite Pro XY DRO, System Controls
SURFACE GRINDERS • CYLINDRICAL GRINDERLivnica-Kikinda (Yugoslavia) 20” x 60” Hydraulic Surface Grinder Model PRB500/1500, S/N 277 (1999), 20” x 60” Electromagnetic Chuck & Rectifier, Power Downfeed, CoolantHarig 6” x 18” Autostep Surface Grinder Model 618, S/N 6987-H, 6” x 18” Chuck, Incremental Downfeed, DROHarig 6” x 18” Hand Feed Surface Grinder Model 618, S/N 9570-W, 6” x 18” Permanent Magnetic Chuck, DROK.O. Lee 6” x 12” Hand Feed Surface Grinder Model 3612, S/N 17275GJ, 6” x 12” Permanent Magnetic ChuckTos 11” x 29” Cylindrical Grinder Mdl. 2UD-750, S/N 296159 (1999), Motor Driven Work & Wheel Heads, Coolant
RADIAL DRILL • BAND SAWS • JIG BORERH. Cegielski 5’ Arm x 14” Column Radial Drill Model WRA40/125M, S/N 0380-42B, Box Table, T-Slot BaseArmstrong-Blum Marvel 18” Automatic Vertical Mitering Band Saw Model 81A9, S/N E357588-1, Stroker, Roller Feed Table, Air Vise, CoolantDoAll 36” Contour Vertical Band Saw Model 3612-1H, S/N 382-78125, 24” x 30” Table, Welder/GrinderMoore Jig Borer Model B18, S/N B1649, 11” x 24” Work Table • Large Assortment of Jig Borer Accessories
EDM MACHINE • PRESS BRAKES • SHEAR • WELDERSHansvedt CNC Ram Type EDM Machine Model US-70C, 22” x 36” Platen, with Power Supply, CNC Control (rebuilt 2002)Cincinnati 90 Ton Hydraulic Press Brake Model CB-90, S/N 48508, 10’ Overall, 102.5” Between Housings, 7” Throat, 8” StrokeNiagara 15 Ton Power Press Brake Model 1B-15-3-4, S/N 42536 , 4’ Wide, 2” Stroke • 48” Box & Pan Press Brake, S/N 26300203 (2004), 16 ga.Peck, Stow & Wilcox 72” Power Shear Model G-372-G, S/N 585717, Back GaugeMiller 350 Amp Syncrowave TIG Welder Model 350, w/Radiator • Miller 300 Amp Constant Voltage MIG Welder Model CP-300, S-52E Wire Feed
BRIDGE CRANESSpeedway 5 Ton Single Girder Overhead Bridge Crane, 45’ Span, PendantRobbins & Meyers 5 Ton Single Girder Bridge Crane, 35’ Span, 5 Ton Capacity Electric Hoist, Approx. 200’ Runway, Pendant ControlsRobbins & Meyers 5 Ton Single Girder Bridge Crane, 25’ Span, 5 Ton Capacity Electric Hoist, Approx. 100’ Runway
INSPECTION EQUIPMENTMitutoyo 24” x 20” x 10” Model CX-652 Coordinate Measuring Machine, S/N 5065Brown & Sharpe CNC Coordinate Measuring Machine Model XCEL 7.10.7, S/N 1291-143Wilson Rockwell Hardness Tester Model 1JR, S/N 976 • 60” x 96” x 12” (est.) Granite Surface Plate with Fabricated Steel BaseInspection Equipment including:Profilometer, Mitutoyo Optical Comparator, 48” x 96” x 12” Granite Surface Plate, Micrometers, Pitch Micrometers, Gauge Stands, Dial Indicators, Bore Gauges, Pin Gauges, Height Gauges, Thread Gauges, Calipers, Surface Plates, & More
MISCELLANEOUS EQUIPMENT • AIR COMPRESSORSSunnen Precision Honing Machine Model MBB-1600, S/N 45354, Coolant, Assorted ToolingPonar Universal Cutter Sharpener Model NVA-25M, S/N 155, w/Grinding Fixture, Dust Collector • Sellers Drill Grinder Model 9G, S/N 02-2181Dake 75 Ton H-Frame Hydraulic Shop Press Model 75H, S/N 157558 • Arcan 20 Ton H-Frame Hydraulic Shop Press Model CP-20Greenerd Floor Type Arbor Press Model H-57-2 • Delaval 2.5 cu. ft. Chip Wringer, S/N 65-52, 1150 RPM, (5) Bowls with Dollies, LidZero 2-Hole Reach-in Blast Cabinet Model DCM-200-R, S/N 18918 • Bortek Factory Cat Manual Floor SweeperPryor Marking Machine • (10) Assorted Tool & Cutter and Bench Grinders and Belt SandersIngersoll Rand 25 HP Rotary Air Compressor Model 200E25, S/N 0403240104Boge 40 HP Rotary Air Compressor Model S400L73, S/N 209C1350 • Aircel Refrigerated Air Dryer Model VF-100, S/N VIC ETH 1035
FORKLIFTS • TRUCKS • FACTORY EQUIPMENTYale 6500 lb. LP Lift Truck Model GLP065T, S/N 177B22387V, Solid Tires, Overhead Guard, 3-Stage MastYale 5000 lb. Electric Lift Truck Model ERC050, S/N E108V071814, Solid Tires, Overhead Guard, 3-Stage MastCrown 1500 lb. Electric Walk-Behind Stacker Lift Model WT-130, S/N 223602003 Ford F-250 Pick-up Truck, VIN 1FTNF20P63ED54710, Turbo Diesel, 5-Speed Manual Transmission1999 International Model 4700 20’ Stake Truck, VIN 1HTSCABM4XH606048, Diesel, 6-Speed TransmissionFactory Equipment including:Blue M Oven, Portable Gantries, Engine Lift, 1 Ton Jib Crane, 24” Vibratory Feed Bowl, Shelving, Storage Cabinets, Tooling Carts, Benches, Bench Vises, Shop Fans, Raw Materials, Fastener Racks, Portable Air Conditioners, Acorn Welding Table, Ladders, Pallet Rack,Electric Hoists, Self Dumping Hoppers, Vidmar Cabinets, Power Hand Tools, etc.
Bid On Site or Online at
INSPECTION: Monday, December 8, 2014 9:00am - 4:00pm
PUBLIC AUCTION
ATTENTION: PLANT MANAGEROR MACHINERY BUYER
Precision CNC Machining Plant
105 Revere Drive, Suite CNorthbrook, Illinois 60062
www.pplauction.com
SALE DATE: Tues. December 9 9:00 am ESTINSPECTION: Mon. December 8, 2014 9:00am - 4:00pm
REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer’s normal “Terms of Sale”, whichare available at the site or by request at 224-927-5320. A 15% Buyer’s Premium will be added to the final bid price. All bids are in US dollars. An18% Buyer’s Premium will be added to online bids. Your bid is a contract: Place a bid only if you’re serious about buying the item. If you are thehigh bidder, you will enter into a legally binding contract with PPL Auction.
PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, BankCheck or Cashier’s Check payable to PPL Auction will be accepted. Firm and personal checks accepted only if accompanied by a letter fromyour bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the sale. All sales are subjectto sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only.
VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warrantyor guarantee, expressed or implied, as to the accuracy of the information contained in the auction brochure, lot catalog or sale web pages.Buyer agrees to accept assets purchased per standard auction terms, “AS IS, WHERE IS, WITH ALL FAULTS” WITHOUT ANYREPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIEDREPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION ORWARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicleto remove anything from the auction site, will be required to present a certificate of insurance. Removal may begin when the auction hascompleted and payment in full has been made.
ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser’s address on file after payment is received and cleared.
All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resoldby auctioneer, any loss incurred in the resale to be borne by the original buyer.
Auction Terms & Conditions UNABLE TO ATTEND?Bid online in real time at
ON-LINE BIDS SUBJECT TO 18% BUYER’S PREMIUM
Scan with yourphone to link to ourwebsite
PPL IL License No. 444.000322 IL Auctioneer Lic. Nos.: David Muslin 441.001650, Joel Bersh 441.000826 Pennsylvania Auction Licenses Applied For
SALE DATE: Tuesday, December 9, 2014 9:00am EST
PUBLIC AUCTIONPlant Closed: HyPex, inc.
105 Revere Drive, Suite C • Northbrook, Illinois 60062 Ph: 224.927.5320 • Fax: 224.927.5311 • [email protected]
