English Measuring outside diameter of chamfer 0 90 80 70 60 50 40 30 20 10 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 6 7 8 9 0,01 mm HEXACON Made in Germany 10 20 40 30 60 70 80 90 E x t e r i o r c h a m f e r m e a s u r i n g Precision interior and exterior chamfer measuring instruments Chamfer size Chamfer- angles 45° 90° Workpiece Length L Precise measurement of chamfer with 45° angles on 90° workpieces. D Measures the largest diameter of chamfers 0 20 40 60 80 100 120 140 160 180 180 160 120 140 80 60 40 20 0 2 4 6 8 10 12 14 16 18 20 20 18 16 14 12 8 6 4 2 0 0,01 mm HEXACON Made in Germany 1 : 2 · S p e c i a l g ag e f o r c h a m f e r H i g h P r e c i s i o n - M a d e i n G e r m a n y TiN COATED 2200 HV 100 % P r e c o n P r e c o n i i - H i g h H i g h M a d e i n M a d e i n G e r m a n y G e r m a n y 100 % 100 %
Transcript
English
Measuring outside diameterof chamfer
Ø
090
80
70
60
50 40
30
20
10
109876
5 4 3210
1
23
46 7
89
0,01 mm
HEXACONMade in Germany
10
20
40
30
60
70
80
90
Exter
ior chamfer measuring
Precision interior and exterior chamfer measuring instruments
Cham
fer s
ize
Chamfer-angles 45°
90°Workpiece
Leng
th L
Precise measurement of chamfer with 45° angles on 90° workpieces.
D
Measures the largest diameter of chamfers
0
20
40
60
80100
120
140
160
180180
160
120
140
80
60
40
20
0246
8 10 12141618
2020
18
1614
12 864
2
0
0,01 mm
HEXACONMade in Germany
1:2 ·
Specia
l gage for chamfer
Hig
h P
recision - M
ade in
Germ
any
TiN COATED2200 HV100 %
Pr
econ
Pr
econi i --
Hig
hH
igh
M
ade in
M
ade in
Germ
any
Germ
any100 %100 %
Hexacon Messtechnik GmbH specializes in the area of precision hole and chamfer measurement.
We produce high-precision chamfer measuring instruments for the measurement of interior and exterior chamfers for either single or series measurement. The advantage is the wide measuring range of up to 20 mm with very high accuracy. Even the smallest diameters, as low as 0.5 to 20 mm, can be reliably and precisely measured with a single measuring instrument. Our standard product line includes measuring heads with diameters from 0.5 to 120 mm. Other diameters or measuring angles are available upon request.
The repeat accuracy of our chamfer measuring heads at IT 8 is < 0.01 mm.
The modular design of our chamfer measuring instruments is particularly advantageous. Our chamfer measuring heads are inter-changeable. With their standard M10x1.5 mm threads, the measuring heads can be easily and quickly replaced at any time. This allows holders and gages or measuring probes to be used with different measuring heads. For example, the measuring angle can be kept the same while swapping the measuring heads for interior and exterior chamfers.We offer interior and exterior chamfer measuring instruments with measuring angles of 90°, 60° and 127° in standard variants.Other measuring angles upon request.
A special gage for 90° measuring instruments is included in the delivery. It shows the measuring results on a 1:2 scale directly in millimeters, making it much easier to read the result off. That eliminates the need for conversion, saving time and ensuring reliable measuring results.
For measuring heads over 80 mm or for other measuring angles, we recommend digital gages with a factor setting, for example the MU 04-001 digital measuring gage or inductive measuring probes in our overall hole and chamfer measuring catalog.
100 % Made in Germany
All Hexacon PMK precision measuring heads and chamfer measuring heads, chamfer probes and insertion measuring instru-ments are tough, reliable, high-precision metrology equipment made 100% here in Germany.
Our system accessories, such as gage holders, centering holders, and depth extensions are also made in our own facilities, 100% Made in Germany. Standard accessories are generally in stock in the warehouse.
Know-how and years of experience
Our engineering services in the area of technical and production development since 1996 guarantee you perfect measuring problem solutions in the area of precision hole and chamfer measurement.
Titanium nitride coating
All Hexacon precision metrology equipment is manufactured of high-quality tool-grade steel and treated at no extra charge with a quality-improving titanium nitride coating. This has been our standard for many years.
TiN coating provides very good hardness, about 2200 HV, as well as corrosion resistance with outstanding sliding and friction characteristics. The result is reduced wear and longer service life for your measuring tools.
Repair capability and service
All our hole and chamfer measuring instruments are not only robust, but are also outstandingly capable of repair. Our services include the delivery of original replacement parts up to and including complete refurbishment and remanufacture of worn measuring tools to as-new condition in our factory, as well as recalibration of metrology equipment.
Hig
h P
recision - M
ade in
Germ
any
TiN COATED2200 HV100 %
Pr
econ
Pr
econi i --
Hig
hH
igh
M
ade in
M
ade in
Germ
any
Germ
any100 %100 %
Factory: Dieburg Germany.
2022242628 30 32 34
363840
0,01 mm
HEXACONMade in Germany
HEXACON
180
160
120
140
80
60
40
20
40
383634
3228 26
2422
2060
80
100 120
140
160
18040
20 0
HEXACON
interior- exterior chamfers
made in germany www.hexacon.net Page 3
The special measuring gages with 1:2 display scale for 90° measuring angles conveniently show the size of the outer diameter of the chamfer directly in millimeters! That eliminates conversion and reading errors. The measuring gages are equally suitable for either interior or exterior measurement. We offer these special measuring gages for precision measuring heads with diameters from 0.5 to 80 mm, each with a 20 mm measuring range.
Functional principle of chamfer measurement
Precision interior and exterior chamfer measuring instruments with titanium nitride coating.
We offer interior and exterior chamfer measuring instruments with measuring angles of 90°, 60° and 127° in standard variants.
They are suitable for quick precision measurement of chamfers, depressions and holes, both for one-time measurement or for series measurement.
Their wide measuring range of up to 20 mm is a great advantage.
In their purely mechanical measuring principle, the measuring cone probes the chamfer, depression, or hole and directs the force within the housing onto a hardened, ground drive needle and then to the display.
A measuring gage holder connects the measuring head to corresponding displays such as analog or digital measuring gages, inductive measuring pro-bes, measuring columns, or automated computer measuring systems.
The removable HM-03-60 measuring gage holders are included in the standard scope of delivery and permit the flexible handling of different measuring heads.
For example, at 90° measuring angles, measuring heads of different sizes as well as interior and ex-terior measuring heads can easily be swapped while still using the same holders, gages, or measuring systems.
The quality-improving titanium nitride coating, with high hardness values - about 2200 HV - and outstanding sliding and friction characteristics, is included in the standard scope of delivery at no extra cost. It gives our precision metrology equipment its outstanding service life.
Other measuring angles upon request.
All Hexacon metrology equipment 100% Made in Germany
Chamfer measurement
TIP!The special analog measuring gage with 1/100 mm display accuracy and a 20 mm measuring range is inclu-ded in the standard scope of delive-ry with all 90° measuring heads!
TIP!The special measuring gages and holders are identical for interior and exterior measure-ment of the same size at 90°, and the measuring heads are interchangeable.
The special measuring gage is included in the standard scope of delivery up to a 80 mm diameter! The measuring gage holder is always included in the delivery.
The special measuring gage displays the result of the chamfer directly in mm !
20222426
28 30 3234363840
0,01 mm
HEXACONMade in Germany
HEXACON
180
160
120
140
80
60
40
20
40
383634
32 28262422
20
60
80100
120
140
160
180
40
200
HEXACON
The special measuring gage displays the result of the chamfer directly in mm !
Meas
uring
rang
e 20
-40
mm
Meas
uring
rang
e 0,
5-20
mm
0246
8 10 12141618
20
0,01 mm
HEXACONMade in Germany
HEXACON
180
160
120
140
80
60
40
20
20
181614
12 8642
0
020
40
60
80100
120
140
160
180
HEXACON
Interior chamfer measuring instruments for 90° chamfers Standard variant including holder and gage.
Precision interior chamfer measuring instrument with titanium nitride coating.
Interior chamfer measuring instruments with a 90° measuring cone quickly and accurately measure the largest diameter of chamfers, depressions and holes. Their measuring accuracy is 0.01 mm.
The special analog measuring gage inclu-ded, with its 1:2 scale division, shows the result of the largest chamfer diameter direct-ly in mm with no conversion needed. The display accuracy is 0.01 mm. The special measuring gage is suitable for interior or exterior cone measuring instruments with 90° measuring angles.
The HM-03-60 measuring gage holder, also included, is removable to permit its use and combination with other components in our accessory line.
Particularly convenient is not only the large measuring range of about 20 mm, but also the long service life of the measuring head thanks to the titanium nitride treatment.
made in germany www.hexacon.net Page 5
FM FB-01 90° Ø 5 - 20 mm FM FB-04 90° Ø 60 - 80 mm
Cha
mfe
r mea
surin
g 90
o
Precision exterior chamfer measuring instrument with titanium nitride coating.
Standard exterior chamfer measuring instruments with 90° measuring angles are used for quick precision measurement of the diameter of exterior chamfers and shaft ends. Their wide measuring range of about 20 mm is a great advantage.
For all 90° variants up to a diameter of 80 mm, the measuring head, special measuring gage, and measuring gage holder are provided together as a kit! For larger diameters, we recommend digital measuring gages with a factor setting.
Precision interior chamfer measuring instrument with titanium nitride coating.
Interior chamfer measuring instruments with a 90° measuring cone quickly and accurately measure the largest diameter of chamfers, depressions and holes. Their measuring accuracy is 0.01 mm.
Die analoge Spezialmessuhr mit Skalentei-lung 1:2 zeigt das Ergebniss des größten Fasendurchmessers direkt in Millimeter an. Die Anzeigegenauigkeit beträgt 0,01 mm. Die Spezialmessuhr eignet sich für Innen- und Aussenk
The HM-03-60 measuring gage holder, also included, is removable to permit its use and combination with other components in our accessory line.
Particularly convenient is not only the large measuring range of about 20 mm, but also the long service life of the measuring head thanks to the titanium nitride treatment.
Interior chamfer measuring instruments for 60° chamfers Standard variant including holder.
The special measuring gages and holders are identical for interior and exterior measurement of the same size at 60°, and the measu-ring heads are interchangeable.
The special measuring gage is not included !
The special measuring gage is not included !
The measuring gage holder is always included in the delivery.The special measuring gage is not included !
For comparative measure-ments a reference workpiece or configuration master is required.
30°
FM FA-01 60° Ø 5 - 12 mm FM FB-04 60° Ø 60 - 80 mm
Precision exterior chamfer measuring instrument with titanium nitride coating.
Standard exterior chamfer measuring instruments with 60° measuring angles are used for quick precision measurement of the diameter of exterior chamfers and shaft ends. Their wide measuring range of about 10 mm is a great advantage.
For all 60° variants we recommend digital measuring gages with a factor setting.
Hig
h P
recision - M
ade in
Germ
any
TiN COATED2200 HV100 %
Pr
econ
Pr
econi i --
Hig
hH
igh
M
ade in
M
ade in
Germ
any
Germ
any100 %100 %
Cha
mfe
r mea
surin
g 60
o
Standard variant includes holder.
For all 60° variants we recommend digital measuring gages with a factor setting.
Meas
uring
gage
s with
a fa
ctor s
etting
!
31.899ABS mm
ON / OFFTOL
SET TOL
PRESET DATA RESET
SETPR ABS
MENU
Meas
uring
gage
s with
a fa
ctor s
etting
!
31.899ABS mm
ON / OFFTOL
SET TOL
PRESET DATA RESET
SETPR ABS
MENU
HEXACON
HEXACON
Exteri
or chamfer measuring
Overall catalog · Page 91
NEU ! NEU !
Principle: Bell
made in germany www.hexacon.net Page 8
Präzisions Innen-Fasenmessgerät mit Titan-Nitrid Beschichung.
Innen-Fasenmessgeräte mit 127o Messkegel messen schnell und präzise den größten Durchmesser an Fasen, Senkungen und Bohrungen. Die Messgenauigkeit beträgt 0,01 mm.
Die analoge Spezialmessuhr mit Ska-lenteilung 1:2 zeigt das Ergebniss des größten Fasendurchmessers direkt in Millimeter an. Die Anzeigegenauigkeit beträgt 0,01 mm. Die Spezialmessuhr eignet sich für Innen- und Aussenkegel-messgeräte mit 90° Messwinkel.
Der mitgelieferte Messuhrhalter HM-03-60 ist abnehmbar und ermöglicht so die Verwendung und Kombination mit wei-teren Komponenten unseres Zubehör-programms.
Beonders vorteilhaft ist sowohl der große Messbereich von ca. 20 mm, als auch die hohe Standzeit durch die Titan-Nitrid-Veredlung.
090
80
70
6050
40
30
20
10
10987 6 5 4 3
210
123
4 6 789
0,01 mm
HEXACONMade in Germany
10
20
40
30
60
70
80
90
FM SC-02 127° Ø 20 - 40 mm FM SC-01 127° Ø 0,5 - 20 mm
Interior chamfer measuring instruments for 127° chamfers
The special measuring gages and holders are identical for interior and exterior measure-ment of the same size at 127°, and the measuring heads are interchangeable.
For all 60° variants we recommend digital measuring gages with a factor setting.
For all 60° variants we recommend digital measuring gages with a factor setting.
127°
0246
8 10 12141618
20
0,01 mm
HEXACONMade in Germany
180
160
120
140
80
60
40
20
20
181614
12 8642
0
020
40
60
80100
120
140
160
180
Effective chamfer measure-ment is possible using the MS-1 measuring stand along with the ZH centering holder.
For all 60° variants we recommend digital measuring gages with a factor setting.
For comparative measure-ments a reference workpiece or configuration master is required.
Exteri
or chamfer measuring
For all 60° variants we recommend digital measuring gages with a factor setting or inductive probe
Precision exterior chamfer measuring instrument with titanium nitride coating.
Standard exterior chamfer measuring instruments with 127° measuring angles are used for quick precision measurement of the diameter of exterior chamfers and shaft ends. Their wide measuring range of about 20 mm is a great advantage.
For all 127° variants we recommend digital measuring gages with a factor setting.
Hig
h P
recision - M
ade in
Germ
any
TiN COATED2200 HV100 %
Pr
econ
Pr
econi i --
Hig
hH
igh
M
ade in
M
ade in
Germ
any
Germ
any100 %100 %
Overall catalog · Page 93
NEW !NEW !
Exterior chamfer measuring instruments for 127° chamfers Standard variant includes holder.
Principle: Bell
made in germany www.hexacon.net Page 10
Determination of the chamfer size
Chamfer size F Length L
0,1 mm 0,07 mm
0,2 mm 0,14 mm
0,3 mm 0,21 mm
0,4 mm 0,28 mm
0,5 mm 0,35 mm
0,6 mm 0,42 mm
0,7 mm 0,49 mm
0,8 mm 0,57 mm
0,9 mm 0,64 mm
1,0 mm 0,71 mm
1,5 mm 1,06 mm
2,0 mm 1,41 mm
2,5 mm 1,76 mm
3,0 mm 2,12 mm
3,5 mm 2,47 mm
TIP!
Cham
fer s
ize
Chamfer-angles 45°
90°Workpiece
Leng
th L
FT-01 precision 45° chamfer probe with titanium nitride coating.
Prismatic measurement principle. Measures precision chamfers with 45° angles on 90° workpieces. Diameter 30mm. Set includes measuring gage, display accuracy of 1/100mm. Standard measuring gage connection, diameter 8H7 mm. Can also be combined with other analog and digital measuring gages as well as inductive measuring probes.
Order-Nr.: FT-01 including analog measuring gage • Order-Nr.: FT-01-X without measuring gage
Chamfer probe 45°
Digital measuring gages with factor setting capability allow direct display in mm. The setting or conversion factor is 1.4142.
The determination of the chamfer size is via the table display L = Chamfer size F x 0,7071 Chamfer size F = Length L : 0,7071 The setting or conversion factor is 1.4142.
31.899ABS mm
ON / OFFTOL
SET TOL
PRESET DATA RESET
SETPR ABS
MENULe
ngth
L
Cham
fer s
ize
Chamfer-angles 45°
90°Workpiece
090
80
70
6050
40
30
20
10
10987 6 5 4 3
210
123
4 6 789
0,01 mm
HEXACONMade in Germany
10
20
40
30
60
70
80
90
8H7
L
FT - 01 45° chamfer probe
Mea
surin
g rang
e 10 m
m
The special measuring gage is included in the standard scope of delivery.
Mea
surin
g ga
ges with
a fact
or sett
ing !
Precision 45° chamfer probe Precise measurement of chamfer with 45° angles on 90° workpieces.
Measuring range about 10 mm
Includes measuring gage. The measuring gages have concentric indicator arrangement. Measuring accuracy is 0.01 mm
We recommend also digital measuring gages with a factor setting.
DIN EN ISO 463 / DIN 874 measuring gage for interior and exterior chamfer measurement. Measuring range 10 mm.
45°90°
Chamfer measuring gages
Analog mechanical special precision measuring gages for 90° measuring heads with a large measuring range of 20 mm.Display scale with a 1:2 scale · Display accuracy 0,01 mm.
Analog mechanical special precision measuring gages for 90° measuring heads with display scale directly in mm and a large measuring range.
The measuring gages have concentric indicator arrangement as well as a display scale with a 1:2 scale, permitting convenient read-off of the measured value directly in millimeters for 90° measu-rement. This eliminates reading errors. The measuring range is about 20 mm and display accuracy is 0.01 mm. Clamping shaft Ø 8H6 mm. With fastening screw to prevent unintentional twisting of the scale. Outer ring Ø 58 mm. Threaded measurement tip M2,5.
The special analog measuring gage is already included in the standard scope of delivery for 90° measuring heads!
Measuring: Cone: Order-Nr.: Ø 05 - 20 90° AD-FM-01Measuring force 0,7 N ± 10 % Interior and exterior chamfer measuring.
Measuring: Cone: Order-Nr.: Ø 20 - 40 90° AD-FM-02Measuring force 0,7 N ± 10 % Interior and exterior chamfer measuring.
Measuring: Cone: Order-Nr.: Ø 40 - 60 90° AD-FM-03Measuring force 0,7 N ± 10 % Interior and exterior chamfer measuring.
0
20
40
60
80100
120
140
160
180180
160
120
140
80
60
40
20
20222426
28 30 323436384040
38
3634
32 282624
22
20
0,01 mm
HEXACONMade in Germany
0
20
40
60
80100
120
140
160
180180
160
120
140
80
60
40
20
0246
8 10 12141618
2020
18
1614
12 864
2
0
0,01 mm
HEXACONMade in Germany
AD FM-01 90° Ø 0,5 - 20 mm AD FM-02 90° Ø 20 - 40 mm AD FM-03 90° Ø 40 - 60 mm
Scale 1:2 Scale 1:2 Scale 1:2
0
20
40
60
80100
120
140
160
180180
160
120
140
80
60
40
20
40424446
48 50 525456586060
58
5654
52 484644
42
40
0,01 mm
HEXACONMade in Germany
0
20
40
60
80100
120
140
160
180180
160
120
140
80
60
40
20
60626466
68 70 727476788080
78
7674
72 686664
62
60
0,01 mm
HEXACONMade in Germany
Measuring: Cone: Order-Nr.: Ø 40 - 60 90° AD-FM-04 Interior and exterior chamfer measuring. Measuring force 0,7 N ± 10 %
AD FM-04 90° Ø 60 - 80 mm Overall catalog · Page 88
