Distributed By:
FOLLOW US . LIKE US
PRECISION TOOL SALE
SUMMER 2018
Effective JULY 2nd - SEPT 29th 2018 While quantities last. Some items may not be exactly as shown.
2 Micrometers
Range Order No. Graduation Promo Calibration0-6”
6-12” .001”
104-137104-138
$ 425.96$ 717.25
$ 293.00$ 264.00$ 290.00$ 854.68104-20112-18”
Range Order No. Graduation Promo Calibration0-1”1-2”
.0001”103-135103-136
$ 117.76$ 138.92
$ 39.00
Range Order No. Graduation Promo Calibration
0-1” .0001”115-153 (S-F)115-253 (S-F)
$ 148.12$ 161.00
$ 39.00
Range Graduation Promo0-1” .0001”117-107 $ 230.00
Order No. Calibration$ 39.00
MECHANICAL MICROMETER - SERIES 103Features:• Hammerstone, baked-enamel-finished frame• Friction thimble for exact repetitive readings• With a standard bar except for 0-1” model
MECHANICAL INTERCHANGEABLE ANVILS MICROMETER - SERIES 104Features:• Wide measuring range with interchangeable anvils• Ratchet stop for constant force• Supplied with zero-setting standards for each range• Supplied in fitted wooden case
MECHANICAL SPHERICAL FACE MICROMETER - SERIES 115Features:• With Ratchet stop for constant force• Supplied in fitted plastic case
MECHANICAL UNIMIKE MICROMETER - SERIES 117Features:• With special Disk Anvils - The Unimike is used as a Height
Micrometer • Supplied in fitted plastic case
* .0001 reading is obtain with vernier
Micrometers 3SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH
Range Order No. Remarks Promo Calibration1-2”2-8”
with 2 rods141-102141-208
$ 175.72$ 189.52
$ 76.00with 3 rods $ 89.00
Range Order No. Resolution Promo Calibration
0-1”/ 0-25.4mm293-330-30 $ 262.20
$ 204.25
$ 39.00
.00005”/ 0.001mm 1-2”/ 25.4-50.8mm
.00005”/ 0.001mm
2-3”/ 50.8- 76.2mm4-5”/ 101.6-127mm5-6”/ 127-152.4mm
6-7”/ 152.4-177.8mm
293-340-30293-341-30293-342-30293-350-30293-351-30
293-352-30
$ 275.50$ 324.76$ 513.36$ 531.76
$ 542.80.0001”/ 0.001mm
$ 51.00
06AFM380A $ 211.60Waterproof with Data Switch
Cable Type Order No. Promo
06AFM380B06AFM380C06AFM380F
$ 218.04Straight type
With Data Switch
Features:• Allows you to connect any Mitutoyo gauge with SPC output
directly to your PC or Laptop with USB 2.0
DIGIMATIC MICROMETER - SERIES 293Features:• Measurement data output function is available with a water-
resistance connection cable• Auto Power ON/OFF function• With zero-setting except for 0-1”/0-25mm Model• Supplied in fitted case
INSIDE MICROMETER - INTERCHANGEABLE ROD TYPEFeatures:• Wide range of ID measurements with interchangeable rods• Each interchangeable rod is marked with its measuring range
Holder is furnished with this set, making it possible to check radii in confined or hard to reach locations
• Both micrometer head and furnished rods are satin-chrome finished throughout
• Supplied in fitted plastic case - over 1000mm/ 40” supplied in a wooden case
USB INPUT TOOL
is the universal term for Mitutoyo Digimatic Small Tool Instruments that are free from measuring error and physical deterioration due to the routine exposure to water, cutting oil or coolant.
This high performance is achieved by using encoders that are inherently immune to contamination, where exposure is inevitable, combined with comprehensive sealing techniques and extremely oil resistant materials to guarantee a long working life under normal operating conditions.
4 Indicators
Promo
Range Order No. Graduation Dial Calibration Promo.2” .001”1166T $ 156.40 $ 39.000-50
Range Order No. Graduation Dial Promo.25” .001”1410S-10 $ 124.20 $ 39.000-100
Calibration
Range Order No. Graduation Dial Promo10mm 0.01mm2046S-01 $ 100.28 $ 39.000-100
Calibration
Resolution Promo
.5”/ 12.7mm .00005”/.0001”/.0005”0.001/0.01MM Selectable
543-302 $ 491.28 $ 39.00Range Order No. Calibration
Range Order No. Graduation Dial Promo
$ 39.00
Calibration2414S2415S2416S
2416S-102417S
2424S-19
$ 117.80$ 122.36$ 119.70$ 134.90$ 135.85$ 241.30
.5”
.5”1”
1”1”2”
.001”
0-100
0-50-00-100
0-1000-50-00-100
Resolution Promo1”/ 25.4mm .0005”/0.01mm 575-123 $ 215.28 $ 39.00
Range Order No. Calibration
BACK - PLUNGER DIAL INDICATOR - SERIES 1Features:• Built with measuring spindles on
the back of the units.• This type of indicator offers the
same precision and durability as all other Mitutoyo dial indicators, and operates effectively with optional holding bars.
DIAL COMPACT INDICATORFeatures:• Jeweled bearing to ensure high
sensitivity and accuracy• Revolutionary stem-bush design
for trouble-free stem clamping
STANDARD DIAL INDICATOR - SERIES 2Features:• Unique shock-proof mechanism• Crystal hard coated for durability
and scratch resistance• #2424S-19 *StockProof &
Jeweled bearing type
STANDARD DIAL INDICATOR - SERIES 2Features:• Stem Dial - 3/8”, Yellow dial face• Standard 0.01mm graduation dial
gauges have an outer frame with an outside diameter of 57mm All types come with limit pins and an outer-frame clamp as standard.
• Series 2 dial indicators are Mitutoyo’s most popular and have the widest application.
#2056S-01used for visualization only
PEAK HOLD, DIGIMATIC INDICATOR - SERIES 543Features:• Key-lock and parameter-lock to prevent
accidental change• With analog bar for easy-to-read values• High speed sampling ratio of 50 times
ID-U DIGIMATIC INDICATORFeatures:• Large LCD and simple key operation• The origin is remembered even after
power-off• Flat back type only has no option for
backs.
Indicators 5SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH
Resolution Promo
.5”/ 12.7mm $ 39.00
543-783543-783B543-792B543-793B
$ 202.35$ 202.35$ 303.60$ 313.50.001”
Range Order No. Calibration.0005”/ 0.01mm .0005”/ 0.01mm .00005”/ 0.001mm .0001”/ 0.001mm
Range Order No. Graduation Dial Promo.04” .001”513-518 $ 147.25 $ 39.000-20-0
Calibration
Graduation Promo0.4 - .74” With 2923SB-10 .0001” 511-206 $ 723.12Range Order No. Calibration
$ 89.00
Graduation Promo2.0-6.0” W/2922SB -.0005” 511-743 $ 435.16
$ 388.24
Range Order No. Calibration
0.7-1.4” 511-7511.4-2.5” W/2923SB-10
.0001”
511-752 $ 442.52 $ 89.00$ 427.502.0-6.0” 511-753
0.7-6” 511-932 $ 1137.12
Type Promo7010SN $ 98.80
7011S-107011SN7033B
$ 110.40$ 111.15$ 227.05
Supports magné�que
Order No.
Universal Magne�c Stand
Magne�c Stands
POCKET TYPE INDICATORFeatures:• Jeweled bearing to ensure high
sensitivity and accuracy• Reversible measuring direction• Fully adjustable bezel/dial face• Bezel is sealed with on O-ring to
keep out water and oil
ID-S DIGIMATIC INDICATORFeatures:• Unlimited response speed eliminates
over-speed errors• Similar in size to standard 2 Dial Face
Features:• Interchangeable anvils are made
of alloy steel• The dial indicator is fully
protected by a rugged cover• For small Holes
Features:• Mitutoyo offers a complete selection of
Bore Gauges all with interchangeable anvils & accessories to perform close tolerance ID measurements
Features:• Mitutoyo’s Magnetic Stands accept
all Dial Indicators and Dial Test Indicators.
• The off/on switch offers instant mounting without any adverse effects to the Indicator or workpiece surface
BORE GAUGES
MAGNETIC STAND
6 Calipers & Other Gauges
Resolution Promo0(.4”)-12”/ 0(10)-300mm .0005”/0.01mm551-341-10 $ 914.48
Range Order No. Calibration$64.00
552-314-10 $ 2086.56 $165.000(1”)-40” .0005”/0.01mmResolution PromoRange Order No. Calibration
Graduation Promo0-6”
.001” 505-742 $ 140.60
Range Order No. Calibration
0-12” 505-746 $ 328.70 $64.000-12” 505-749 $ 287.96 $64.00
$39.00
Resolution Remarks Promo0-6”/0-150mm
.0005”/0.01mm
500-160-30 $ 344.08
$ 39.00
Carbide-�pped Jaws for OD & ID500-164-30
500-173500-506-10
$ 429.64$ 530.10$ 1032.65Without Thumb Roller
Range Order No. Calibration
0-8”/0-200mm0-12”/0-300mm0-24”/0-600mm
$39.00$51.00$64.00
$114.00500-763-200-8”/0-200mm $ 365.75 $51.00
Resolution Promo0-6”/0-150mm
.0005”/0.01mm
571-211-30 $ 438.84
$ 39.00
571-212-30571-213-10571-263-10*
$ 470.12$ 545.56$ 631.12
Range Order No. Calibration
0-8”/0-200mm0-12”/0-300mm0-12”/0-300mm
$51.00
$114.00
$64.00 Resolution Promo0-18”/0-450mm .0005-.0002”/
(0.01-0.005mm) 192-671-10 $ 2318.40 $ 140.00
$ 3047.04
Range Order No. Calibration
0-24”/0-600mm 192-672-10 $ 216.00
NIB STYLE/STANDARD DIGIMATIC CALIPERFeatures:• The rounded faces of the
jaws are ideal for accurate ID measurement.
• Supplied in fitted plastic holster and wooden case
CARBON FIBER DIGIMATIC CALIPER
MECHANICAL DIAL CALIPERFeatures:• New designed dial movement for ultra-smooth sliding and high-
shock protection.• New face for improved readability
DIGIMATIC ENCODER TECHNOLOGY CALIPERFeatures:• Large and clear LCD readout• Data Hold Unit (959143) is
optional.• Thumb roller included only on
calipers up to and including 12” or 300mm
• Carbide-tipped jaw-type calipers are also available
DIGIMATIC DEPTH GAUGEFeatures:• This gauge can keep track of the origin point,
once set for the entire life of battery.• Optional wider extension based are
available up to 450mm range models
DIGIMATIC MULTI-FUNCTION HEIGHT GAUGEFeatures:• Highly versatile multi-function
type• shown with optional bi-
directional tough-signal probe• carbide tipped longer scriber
is provided
Features:• Highly durable and easy to handle• Range of application can expand by using optional
attachments • Direct Readout of ID Measurement from LCD screen
* Encoder technology unavailable **Without SPC
**
*
* With IP67 and SPC
SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH Other Gauges 7
Resolution Promo.5” .0005”575-313 $ 276.45
Range Order No. Calibration$39.00
Leaves Promo1/32”- 1/4” 186-101 $ 41.80
186-102 $ 56.12
Range Order No.
17/64”-1/2”
15
16
1-7mm 186-105 $ 52.44
186-106 $ 63.487.5-15mm
34
32
Leaves Promo1/64” - 17/64” by 64ths
& 9/32” - 1/2” by 32nds 186-901 $ 145.35
Size Order No.
25
Promo0-10mm 7301 $ 141.68Range Order No. Calibration
$51.00 Promo
0-.5”/0-12.7mm 700-118-20 $ 162.84Range Order No. Calibration
$39.00
RADIUS GAUGES Features:• Radius size is stamped on each gauge• Both concave and convex radius gauges become a pair with
lock clamp
Features:• Radius Gauges are
recommended for checking or laying out concave or convex radii.
• The holding cases provide protection and have indexed pockets for proper selection. The holder is furnished with this set, making it possible to check radii in confined or hard to reach locations.
DIAL THICKNESS GAUGEFeatures:• Standard, ceramic spindle/
anvil• Standard accessories
included 21AZB149 Spindle lifting lever for digimatic and dial thickness gauge (stroke 5”/12.7mm)
QUICK MINI THICKNESS GAUGEFeatures:• Measuring force less than 2N• Supplied in fitted case• A compact comparator designed for
carrying quick inspection of paper, thickness, leather, wires, plastic parts etc.
LINEAR GAUGEFeatures:• Maintains the reference point
even when the power is switched off
• Protected against dust and coolant on the factory floor
Did you know? The ABS (absolute) scale requires no origin setting after power-on and also has no limit to response speed. This means the zero position can be set, or reset with the origin switch at any time.
8 Laser
LASER SCAN MICROMETERS
LSMPAK V2.0 Software for Laser MicrometersOrder No. 02NGA002SALE $1,659.75Reg. List $2,213.00
• Software can import measurement data from multiple LSM-5200 display units to a PC allowing a variety of measuring systems to be constructed
• Capable of processing a maximum of 10 channels of measurement data
• Capable of calculation between channels, statistical analysis, file output of calculation results
LSMPAKLASER SOFTWARE FOR LSM-5200 DISPLAY UNIT
• A compact controller which could be used for multi-unit system configurations
• Capable of simple connection to a PC via USB
• A panel-mount type display unit designed for the LSM-S series
• Measurement of odd fluted parts, and simultaneous measurement / 2-program function are equipped
LSM-5200 DISPLAY UNITREAL-TIME MULTI-CHANNEL MEASUREMENT
LSM-5200 DisplayOrder No. 544-047SALE $2,812.50Reg. List $3,750.00
Resolution Promo .0002-.08 / .005-2mm 544-532 $ 6,647.25
$ 5,672.25$ 6,403.50$ 7,687.50
Range Order No.
.002-.4" / .05-10mm
.012-1.18" /0.3-30mm
.04-2.36" / 1-60mm
.04-4.72" / 1-120mm $ 13,500.00
544-534544-536544-538544-540
$3,075.00544-072A
Description
LSM - 6200
LSM-512S
LSM-506S LSM-503S LSM-501S LSM-500S .000001”-.0005”/0.00001-0.01mm
.000001”-.0005”/0.00001-0.01mm
.000001”-.005”/0.00002-0.1mm
.000002”-.005”/0.00005-0.1mm
.000005”-.005”/0.00001-0.1mm
Features Include:• Ultra-high speed 3200 scans/sec• Statistical calculation mode• RS-232C and I/O interfaces are standard• Capable of handling high speed applications or workpieces that vibrate• Free Quicktool software (for use with customer supplied PC and RS-232C cable
On select Laser Micrometers
SAVE 25%
With a wide variety of models, LSM Measurement can be utilized in diverseapplications. The LSM-500S can measure ultra-fine wires as thin as .0002”(0.005mm) in diameter to a resolution of .000001” (0.00001mm) Options for measuring large diameters are available.
8
SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH
BUILD YOUR OWN DIGITAL READOUT PACKAGE
Features Included with purchase of AT715 ABSOLUTE Coolant Proof Linear Scale
KA-200 Digital CounterFeatures include: Excellent addition to manual machine retrofit packages Many high end functions packed into this standard counter Large LED display is sharp and bright. Easy to see at a distance The positive touch front panel keys are solid and easy to push with fast response The sub display lets you know what function you are currently using
Brackets
Code Description Without Minimum Purchase
With Minimum PurchaseMinimum Purchase:
$ 697.30
$ 1026.00One AT715 Linear Scale &One KA-200 Counter (2 or 3 axis)
See table for pricing
$ 734.00
$ 1080.00
174-183A
174-185A
your choice
KA-200 Counter (2-axis)
KA-200 Counter (3-axis)
1pc. Linerar Scale
Order No. Effective Range Without Minimum Purchase
$ 351.50
$ 351.50
$ 355.30
$ 355.30
$ 355.30
$ 359.10
$ 363.85
$ 370.50
$ 374.30
With Minimum Purchase
$ 380.95
539-801
539-802
539-803
539-804
539-805
539-806
539-807
539-808
539-809
539-811
4”/ 100mm
6”/ 150mm
8”/ 200mm
10”/ 250mm
12”/ 300mm
14”/ 350mm
16”/ 400mm
18”/ 450mm
20”/ 500mm
24”/ 600mm
$ 370.00
$ 370.00
$ 374.00
$ 374.00
$ 374.00
$ 378.00
$ 383.00
$ 390.00
$ 394.00
$ 401.00
$ 388.55
$ 394.25
$ 397.10
$ 433.20
$ 450.30
$ 511.10
$ 572.85
$ 635.55
$ 694.45
$ 770.45
539-813
539-814
539-815
539-816
539-817
539-818
539-819
539-820
539-821
539-822
28”/ 700mm
30”/ 750mm
32”/ 800mm
36”/ 900mm
40”/ 1000mm
44”/ 1100mm
48”/ 1200mm
52”/ 1300mm
56”/ 1400mm
60”/ 1500mm
$ 409.00
$ 415.00
$ 418.00
$ 456.00
$ 474.00
$ 538.00
$ 603.00
$ 669.00
$ 731.00
$ 811.00
$ 863.55
$ 953.80
$ 1045.00
$ 1591.25
$ 1698.60
$ 2042.50
$ 2090.00
$ 2137.50
$ 2280.00
$ 2541.25
539-823
539-824
539-825
539-860
539-861
539-862
539-863
539-864
539-865
539-866
64”/ 1600mm
68”/ 1700mm
72”/ 1800mm
80”/ 2000mm
88”/ 2200mm
96”/ 2400mm
100”/ 2500mm
104”/ 2600mm
112”/ 2800mm
120”/ 3000mm
$ 909.00
$ 1004.00
$ 1100.00
$ 1675.00
$ 1788.00
$ 2150.00
$ 2200.00
$ 2250.00
$ 2400.00
$ 2675.00
$ 267.00
$ 275.00
$ 297.00
$ 324.00
$ 451.00
$ 226.00
Price
64AAB196
64AAB197
64AAB198
64AAB191
64AAB194
64AAB200
Order No. Description
Universal bracket kit (12”)
Universal bracket kit (14 -16”)
Universal bracket kit
Bracket kit
Scale Y axis
Machine arm kit (KA Counter)
Milling System
Lathes
Grinders
All Systems
64AAB199 $ 58.00Screw kit
CNC FORM PROMO
HOW THE PROGRAM WORKS• Trade in your current FORM
machine any model, any make and trade up to a Mitutoyo CNC model
WHY CHOOSE MITUTOYO?
• Machine removal will be supplied
• SPC data management software included
• Lifetime technical phone support will be given
• On-site factory trained technicians dispatched from Mississauga, Montreal & Edmonton.
• ISO 17025 Calibration Laboratory
• ISO-17025 accredited Form calibrations
• In-house repair facility for all Mitutoyo products
• Inventory to spare parts & accessories
• Knowledgeable technical & sales support groups available
CNC FORM SYSTEM ADVANTAGESCNC Form systems have higher throughput through increased speed and greater flexibility with added
measuring axis. Did you want to know more about CNC form system advantages? Contact your Mitutoyo Canada sales
representative or email us at [email protected]
• By trading up you will receive the latest technology, ensuring reliable uptime, and lower maintenance costs.
9
A SIMPLE SOLUTION FOR YOUR DATA MANAGEMENT NEEDS Software created by Mitutoyo gives you the ability to organize your data with less errors than hand written process and easy traceability. Real Time Standard (small tool application) or Professional (CMM/Vision/Form) is designed for customers who want to analyze, check variables and attribute inspections to maximize production and minimize defects.
MEASURLINK VERSION 8
Description List PriceOrder No. 64AAB47064AAB471264-505A
So�ware Measurlink -Real Time Standard V8
So�ware Measurlink -Real Time Professional V8
Data Processor, DP-1VA
$ 1,434.00$ 2,154.00
FREE OF CHARGE* with purchase of either Measurlink - Real Time Standard or Pro
Events
DP-1VA provides the capability to be used as a standalone data processor, plus the enhanced functionality allows it to be used as a data logger, storing thousands of part measurements that can be downloaded to a host PC. The DP-1VA can also be used as an input tool for the transfer of measurements direct from measurement tool into your computer. MEASURLINK compatibility provides the user with the best of both a local collection and storage device, and an enhanced ability to analyze collected data.
GD&T Workshop - June 7th, 2018Location, location, location - find out why location is very important in the manufacturing industry. Learn the true definition of: Location tolerance, true position symmetry, concentricity and applying measurement tools and techniques. To register for more free workshops hosted by Mitutoyo Representatives go to www.mitutoyo.ca
Hosted by Miranda Dunham, Mitutoyo Metrology Service Technician and Jeff Hamelin, Mitutoyo Sales Support Technician
MITUTOYO CNC FORM FAMILY
• Developed to combined world class accuracy with maneuverability/ high-analysis capability.
• Enhanced detector safety functions, such as accidental touch and collision detection, is designed to reduce damage to both machine and work piece
• Expandable measuring axis Z, theta, Y and alpha.• Surface Form in one unit • Double stylus, plus column movement allows expanded diameter
measurements.
THESE ROUNDNESS & FORMTRACER MEASUREMENT MACHINES ARE PART OF AN UMBRELLA OF MITUTOYO PRODUCTS, UNDERNEATH THE FORM FAMILY.
FOR MORE INFORMATION ON THE ADVANTAGES OF ADOPTING CNC INNOVATIONSINTO YOUR WORK ENVIRONMENT, CONTACT YOUR MITUTOYO SALES REPRESENTATIVE
OR CONTACT US [email protected] / 905 821-1261
LEARN MORE ABOUT THIS EXCLUSIVE PACKAGE WITH THE TRADE IN - TRADE UP PROMO
• The RA-2200 provides high accuracy, speed and performance in roundness measurement.
• Comes fully automatic or digital adjustment table• Extremely high rotation accuracy
LEARN MORE ABOUT THE FORM CNC FAMILY
10
Profile Projectors 11SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH
PROFILE PROJECTORS PACKAGES
PACKAGE #1PH-3515F KA Counter Package
$ 14,500.00LIST PRICE
PACKAGE #2PH-3515F QM-DATA Package
$ 16,875.00LIST PRICE
PACKAGE #3PH-3515F QM-DATA/OPT200
$ 19,500.00LIST PRICE
PACKAGE #4PH-A14 KA Counter Package
$ 10,268.00LIST PRICE
PACKAGE #5PH-A14 QM-DATA Package
$ 12,687.00LIST PRICE
PACKAGE #6PH-A14 QM-DATA/OPT200
$ 14,197.00LIST PRICE
ECONOMY STAND WITH CASTERS
$ 2,012.00SAVINGS OF
& ROTARY VISE
Order No. 050002-E-1
Order No. 172-144
ECONOMY STAND WITH CASTERS
$ 3,709.00SAVINGS OF
& ROTARY VISE, HEAVY DUTY TYPE
Order No. 050002-E-1
Order No. 218-003
Order No. M172868-1
Order No. M172868-2
Order No. M172868-3
Order No. M172810-4
Order No. M172810-5
Order No. M172810-6
PH-A14 Packages
PH-3515F Packages
• Now available with motorized XY stage• Simple and easy usability with powerful back up for your quality control system• Featuring a wide field of view (32x24mm) and a generous depth of focus (up to ± 11 mm)• Outstanding improvement in operational efficiency and productivity• Auto stitching function, batch measurements and one click measurement function is available
Quick Image 2D
STARTING AT
$29,500 USD
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We reserve the right to make changes to the corresponding designs. The stated standards, technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the products are subject to Canadian Export Administration Regulations. Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm with your customer service rep. Some items may not be exactly as shown. Prices are in Canadian dollars, unless otherwise specified. Applicable taxes and shipping charges are extra. © 2018 Mitutoyo Canada Inc., Mississauga ON Canada We reserve the right to change specifications and prices without notice.
We reserve the right to change prices and specifications without notice. Not valid with any other offer or promotion. This promotion is for Canadian market only.
Request formal quotation for complete details.
QUICK IMAGE QI-C2010D
Vision Measuring System