R-410ARefrigerant

QuietOperation

Direct Access Design

ScrollCompressors

Preconditioned Air Unit - ZEPHIRPreconditioned Air Unit Point-of-Use / Stand or Bridge Mounted

The flexible way to deliver preconditioned air, offering high efficiency in handling operations for all types of aircrafts

AHM 650 (IATA) - Potable Water Servicing

AHM 902 (IATA) - Environmental impact on the use of GSE

AHM 910 (IATA) - Basic requirements for aircraft GSE

AHM 913 (IATA) - Basic safety requirements for aircraft GSE

AHM 922 (IATA) - Basic requirements for PBB Aircraft Interface

AHM 973 (IATA) - Functional specification for a towed aircraft ground heater

AHM 974 (IATA) - Functional specification for aircraft air conditioning unit

AHM 1002 (IATA) - Environmental impact on the use of GSE

Ease of installation

Zephir PCAs are point-of-use units which can fit any layout platform and can be installed on any passenger boarding bridge. They are available in both ground-mounted and bridge-mounted configurations and are prepared to be connected to a centralized management system.

Superior passenger comfort

Conceived to provide passengers with an outstanding experience, Zephir PCA uses G4 filters (F5 to F9 filters optional) to supply high quality air inside the aircraft and reinforced thermo acoustic insulation for significant noise reduction.

High efficiency and low operations costsZephir Series are designed and engineered to deliver optimum airflow to each aircraft, using four compressors four phases and high efficiency direct drive centrifugal blower (VFD), while consuming the minimum energy.

Environmentally-friendly refrigerantsZephir PCA uses R-410A refrigerant which respects the environment and the future generation to come. Its high efficiency significantly reduces refrigerant load and CO2 emissions.

Smart PLC control

Zephir PCA is designed according the latest technologies. The PLC can be accessed remotely o via its user-friendly touch screen interface allowing operators to control all parameters of the PCA during operations, monitoring or maintenance phases.

Durability and ease of maintenance

Quality is a must. All components are designed, manufactured and tested in order to offer a service life of at least 15 years. Maintenance tasks can be carried out fast and easy on any component inside the unit thanks to ADELTE’s direct access design. Remote maintenance and monitoring are available to enhance PCA operations.

Key Features

R-410ARefrigerant

ScrollCompressors

Direct Access Design

QuietOperation

Preconditioned Air Unit - ZEPHIRThe ZEPHIR Series provide an efficient, flexible and reliable way to deliver high quality preconditioned air, for all types of stationed aircraft in all climatic conditions

Technical Specifications

ZEPHIR320/120

ZEPHIR270/100

ZEPHIR210/80

ZEPHIR160/60

ZEPHIR120/45

ZEPHIR90/35

318 kW

120 Tn

4 150 kg

167 kW

266 kW

100 Tn

3 800 kg

140 kW

212 kW

80 Tn

3 450 kg

107 kW

160 kW

60 Tn

3 100 kg

80 kW

125 kW

46 Tn

2 550 kg

60 kW

93 kW

35 Tn

2 250 kg

44 kW

Cooling Capacity (*)

Compressor Capacity (**)

Number Compressors / Stages

Length

Width

Height

Weight

Maximum Air Flow

Available Static Pressure

Discharge Temperature

Power Supply

Total Consumption (*)

Refrigerant

Sound level at 4.6m.

ADELTE’s PCA unit is specially designed for heating and cooling all types of aircrafts and for providing maintenance personnel fast and easy access to all components.

Mounted door Condensation Fan for easy access maintenance operations

PCA Hose Connection

Secondary Electrical Cabinet

Main Electrical Pannel

AIR OUTLET FOR HEAT DISSIPATION

AIR OUTLET FOR PRE CONDITIONED AIR OF THE AIRPLANE

AIR INLET FOR DISSIPATION

AIR INLET FOR PRE CONDITIONED AIR OF THE AIRPLANE

AIR INLET FOR DISSIPATIION

Axial & helicoidal Fan

Heat ExchangerGrill Protector(optional)

4/4

1.62 m

2.17 m

-2 ºC to +2 ºC

400 V/3/50 Hz (***)

6 300 Pa 8 500 Pa 10 000 Pa

4.30 m

<85 dBA<80 dBA

5.80 m 6.60 m

PCA operation temperature with R-410A: -40ºC to +46ºC

Optional heating resistors available for lower ambient air temperature (*) at design conditions per ARI/ASHRAE 35 °CDB / 26 °CWB with refrigerant R-410A.

(**) Nominal tons 60 Hz.

(***) other voltages/frequency possible.

(****) other refrigerant (R-134a) is possible. (R-134a refrigerant operation range temperature is: -40 ºC to +55 ºC)

R-410A (****)

200 kg/min150 kg/min80 kg/min

C/ Buenos Aires, 1 08029 Barcelona, SpainPhone: +34 902 300 601 / +34 933 632 294Fax: +34 933 638 295

E-mail: info@adelte.com www.adelte.com

facebook.com/adeltegroup linkedin.com/company/adelte-grouptwitter.com/adelte Follow ADELTE Group:

About ADELTEADELTE provides engineering know-how and result-driven solutions for the world’s leading international airports. From advanced boarding bridges and terminal solutions that deliver a better experience for passengers, to innovative ground support equipment and airport global services to improve performance on the apron, ADELTE is focused on working closely with its partners to enhance airport operations worldwide.

ADELTE takes your airport to the next level.

Associate Member of:

WORLD BUSINESSPARTNER

Standards & RegulationsADELTE’s engineering solutions comply with the following Standards and Regulations, where applicable: The QR code links

directly to this brochure

2202

17 -

Spe

cific

atio

ns a

re s

ubje

ct to

cha

nge

with

out p

rior

notic

e an

d ar

e no

t con

trac

tual

AHM 650 (IATA) - Potable Water Servicing

AHM 902 (IATA) - Environmental impact on the use of GSE

AHM 910 (IATA) - Basic requirements for aircraft GSE

AHM 913 (IATA) - Basic safety requirements for aircraft GSE

AHM 922 (IATA) - Basic requirements for PBB Aircraft Interface

AHM 973 (IATA) - Functional specification for a towed aircraft ground heater

AHM 974 (IATA) - Functional specification for aircraft air conditioning unit

AHM 1002 (IATA) - Environmental impact on the use of GSE

EN Standards

NFP 415 - 2016

EN 12312-4 - Passenger Boarding Bridges

EN 12312-12 - Potable Water Service

EN 12312-17 - Air conditioning equipment

EN 12312-20 - Electrical ground Power Units

Electromagnetic Compatibility (EMC) – (89/23/CEE)

UNE-EN 1915-1:2013 - Aircraft ground support equipment.

General requirements. Basic safety requirements