2013
frame assembler press
216
LP 2412Lo
chpl
atte
npre
sse
• Suitable for many types of glueing applications • Torsion-free base frame in bevelled, securely welded construction• Perforated plate ( ... mm steel sheet) featuring hole grid 40 x 40 mm, bore ... mm in diameter• Lateral and bottom fence in one piece, 75 mm in depth• Allows for multiple pressing operations at one time • Galvanized manual- hydraulic cylinder with bolt for quick position adjustment• Optimal combination of frame and perforating press
Frame assembler press
Standard accessories:• 6 x manual hydraulic cylinder with counter holder• 2 x downholder featuring spindle clamp• Pneumatic pressure bar• Left and bottom fence in one piece
Individual adjustment of compressed air up to 200 kg
Tiltable manual hydraulic cylinder - optionally available.
Pneumatic pressure bar for frame presses comes standard
Downholder with spindle clamp for oversize workpieces
Example of use
Technical data LP 2412Working length max. 2600 mmWorking width max. 1250 mmWorkpiece thickness min. / max. 10 - 75 mmHole pitch 40 x 40 mmPress capacity max. per cylinder 2000 kgCylinder stroke 50 mmAir pressure max. 8 barLength 3070 mmDepth 760 mmHeight 2000 mmWeight approx. 1250 kgArt. no. 14-2126XL
Pentru mai multe detalii referitoare la produsele noastre, vizitati-ne pe www.ebernardo.ro