Presentation

ATM Vision 3

Product Presentation

Overview

ATM Vision 3 Target Markets

Target Applications / Requirements

System Architecture

Features

In a nutshell

TheMa Service Management

ATM Vision - Target Markets

Telcoswant to offer end-to-end service to broadcasters incl. compression technology

Network providerswant to offer network access and their available bandwidth

Broadcasterswant to get a flexible, highly reliable and cost effective service

Cable operatorswant a reliable, cost effective, future prove service with scalable and efficient use of bandwidth

ATM Vision - Target Applications

Video/Audio Contribution

Video/Audio Distribution

DVB-T Multi Service

ATM Edge Routing

Video Contribution Requirements

Single Program MPEG stream

High quality (MPEG-2 4:2:2 @60Mbit/s)

Point-to-Point connection

Connection on demand

Fast clock recovery with high accuracy

High availability, flexibility and interoperability

Inter-Studio communication incl. Data, Telephony & Voice

Easy to use user front end

Accounting and billing information

Video Distribution Requirements

Multiple MPEG MPTSs

Medium to low quality (MPEG-2 4:2:0 @4 to 8 Mbit/s)

High stability of the recovered clock

Forward Error Correction (FEC)

Static point-multipoint connection configuration

High reliability

Redundancy

Centralized management for quality monitoring and fault handling

DVB-T Applications Requirements

Same requirements as for distribution

Additional:

Integration of Telephony and Internet Services

Synchronization for Single Frequency Networks (SFN)

ATM Edge Routing Requirements

E1/T1 Circuit Emulation

Unstructured and Structured mode

Ethernet Bridging

IP Routing

RIP2, OSPF, BGP,...

Integration of LAN services

CLIP/ATMARP, LANE, MPOA, FR,...

Security

Firewall, NAT, Proxy...

The Solution

The ATM Vision 3 is ATecoM’s solution for…

…Video/Audio Contribution

... Video/Audio Distribution

... DVB-T Multi Service

... ATM Edge Routing

ATM Vision 3

AV-1 and AV-3 Rear View

ATM Vision 3 – Base

Module slot for ATM network interface

Module slot for cascade interface

onboard SAR (Control & Data)

2 Ethernet ports (10BaseT + 10/100BaseT)

5 programmable contact closures

4 (AV-3) or single (AV-1) extension slot for Multiservice or AAL1-Function boards

Up to 4 (16) DVB-ASI / SDTI or

Up to 16 (64) E1/T1 CES Interfaces

System Controller

The System Controller

ATM Vision 3 - Network Interfaces

SDH interfacesSTM-1 single-mode (long and short haul)

STM-1 multimodeSTM-1 electricalSTM-1 UTP

PDH interfacesG.703 E3G.703 DS3

otherATM25

Line Interfaces

ATM Vision 3 - Service Interfaces

DVB interfacesDVB-SPI (LVDS, RS422, ECL)

DVB-ASI

SDTI Interface DVCPro 25/50

DV-CAM

MPEG TS/ES

Clear Channel interfacesG.703 E2

G.703 E3

G.703 DS3

Service Interfaces (cont.)

E1/T1 CESUnstructured mode

Structured mode

Ethernet Bridge

Multi-Service Carrier Board

DVB-ASI Service Interfaces

SDTI Service Interface

Firmware

Linux Operating System

SignalingUNI 3.1, UNI 4.0 and Q.2931

ILMI 3.1 and ILMI 4.0

IP RoutingRIP, BGP, OSPF, VRRP, ...

CLIP and LANE

IP FilteringFirewall

SNMP agent

ATM Vision 3 - In a nutshell

The ATM Vision 3 System

meets the requirements of high-quality broadcasting by

an outstanding quality of clock recovery andan efficient and powerful forward error correction

covers contribution and distribution servicesintegrates video, audio and data servicesease the migration from traditional SDH/PDH networks towards ATM networkssupports all common User- and Network interfaces andprovides all relevant software features

The complete picture

The Element Manager

Featuresdifferent access levels

full Configuration of all services via easy to use GUI

one click Operation (SVC and PVC)

online state reporting and extensive statistics gathering and display

powerful protocol debugging

platform independence