Date post: | 29-Mar-2015 |
Category: |
Documents |
Upload: | kolyo-roydev |
View: | 193 times |
Download: | 1 times |
LPG Dispensers LPG Stations LPG Pumps LPG Flow Meters
CNG Equipment Petrol Dispensers Module Petrol Stations
About us
Services
Partners
Products
Spare parts
Contact
This is an interactive presentation. Please click on the buttons
and images, to navigate through
pages.
Singledispenser
LPGK 220 F
Doubledispenser
LPGK 230 F
LPG Dispensers
Singledispenser
type LPGK 314 F with pump unit
Doubledispenser
type LPGK 324 Fwith pump unit
SingleLPG dispenser
type LPGK X1X H
DoubleLPG dispenser
type LPGK X2X H
Double LPG dispenser type
LPGK 324 Hwith integrated pump aggregate
SingleLPG dispenser type
LPGK 314 Hwith integrated pump aggregate
HOME
KALVACHA ENGINEERING produces electronic LPG dispensers of high quality equipped with assemblies made by leading European companies. Newgeneration of electronic LPG dispensers with low service cost, durability, high efficiency, reliability and safety at a good price.CONSTRUCTIONThe body of the LPG dispenser is divided into two modules that are made of high quality stainless steel. An electronic block, preset buttons andkeyboard are fixed in the upper part. The hydraulic block is fixed in the lower part.
Operational parameters:- Work pressure max 1.76 MPa- Test pressure 1.43 x WP- Temperature -20 0 С + 500С
MECHANICS
LPGK – 220, 230 are equipped with:
- Two-piston flow meter DN25, PN25, debit 5- 50l/min, 2x250 cm3 with an impulse sensor fixed on it;
-Filter DN25, PN25 with a magnetic catcher and finenet; with 25 µm openings
-Gas separator with a thermo-sensor, a back –pressure valve and a measurement cup fixed on it;
-Block spherical valve DN10 for the gaseous phase;
-Block spherical valve DN25 for the liquid phase;
-Monometer for high pressure – 40 bar;
-High pressure hose DN19, PN25, 4 meter long, withbreaking coupling, electrical conductive, 100 barsdestroying pressure;
-Pistol T-shaped with a valve type NE;
- Differential valve– DN25, PN25;
- Electromagnetic valve– DN20, PN25
Doubledispenser
type LPGK 325 Fwith pump unit
Double LPG dispenser type
LPGK 325 H with integrated pump aggregate
HOME
LPG dispensersSingle LPG dispenser type LPGK 220 F
Double LPG dispenser type LPGK 230 F
HOME
LPG dispensers
Single dispenser type LPGK 314 F with pump unit
HOME
LPG dispensers
HOME
LPG dispensersDouble dispenser type LPGK 324 F with pump unit
HOME
LPG dispensersDouble dispenser type LPGK 325 F with pump unit
HOME
LPG dispensersSingle LPG dispenser type LPGK X1X H
HOME
LPG dispensersDouble LPG dispenser type LPGK X2X H
HOME
LPG dispensers
Single LPG dispenser type LPGK 314 F with pump unit type RR 2 1/4
HOME
LPG dispensers
Double LPG dispenser type LPGK 324 F with pump unit type RR 2 1/4
HOME
LPG dispensers
Double LPG dispenser type LPGK 325 F with pump unit type RR 2 1/5
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
LPG Filling Stations
Completed projectsGround Modular LPG Stations
Ground Modular LPG Stations with LPG dispenser with integrated pump unit
Underground Modular LPG Stations
Ground Modular LPG Stations with a cylinder filling unit
HOME
Ground modular filling stations
LPG Stations
HOME
Compact module for car refueling, suitable for retail and in-house needs. The systems include: areservoir with capacity of 5 or 10 m3, electronic / single or double LPG dispenser type F-housing-LPGK 220F, LPGK 230 and type H-housing - LPGK 314H , LPGK 324H, a pump aggregate AR2 1/4 or AR21/5 with debit 45 l/min or 90 l/min, protective and regulating fittings.
Technical characteristics 5 m3 10 m3
Pressure - operating- test
1, 67 MPa2, 0 Mpa
1, 6 MPa2, 0 Mpa
Dimensions - length- diameter- Height
4 250 mm1 250 mm1 900 mm
5 400 mm1 600 mm2 100 mm
Mass 1 070 kg 2 900 kg
5 m3 10 m3
Modular aboveground filling stations with dispenser type LPGK XXX with integrated LPG Pump
Gas Stations
HOME
The product line is consists of different models, depending on client needs and the technical regulations of the country where the equipment shall operate.
Compact module for car refueling, suitable for retail and in-house needs. The systems include:a reservoir with capacity of 5 or 10 m3, electronic / single or double LPG dispenser type F-housing- LPGK 220F, LPGK 230 and type H-housing - LPGK 314H , LPGK 324H, a pump aggregateAR2 1/4 or AR2 1/5 with debit 45 l/min or 90 l/min, protective and regulating fittings.This type of modular station is designed to use dispensers with integrated pump aggregate.The scheme is remarkably compact.
LPG Stations
HOMEModular underground filling stations
Technical characteristics 5 m3 10 m3 25 m3 30 m3
Pressure - operating- test
1, 67 MPa2, 50 MPa
1, 67 MPa2, 50 MPa
1, 67 MPa2, 50 MPa
1, 67 MPa2, 50 MPa
Dimensions - length- diameter- Height
4 250 mm1 250 mm1 900 mm
5 400 mm1 600 mm2 100 mm
8 350 mm2 000 mm2 500 mm
9 950 mm2 024 mm2 500 mm
Mass 1 070 kg 2 900 kg 6 000 kg 7 150 kg
Debit of the pump - AR 2 1/4- AR 2 1/5- AR 2 2/6
80 l / min95 l / min120 l / min
80 l / min95 l / min120 l / min
80 l / min95 l / min120 l / min
80 l / min95 l / min120 l / min
The system includes a reservoirwith capacity of 5, 10, 25 or 30m3, connected to a LPG
dispenser with one or two pistols, a pump aggregateKalvacha, a pipe installation, safety and regulating fittings.Options.Along with the standard are available the following options:- Preset system for required quantity or sum;-Electronic gauge for tank fuel content with possibility ofremote indication.
Ground modular stations for commercial needs, combined with cylinder filling scales
Gas Stations
HOME
This type of modular filling stations is a compact equipment, consisting of an LPG dispenser,reservoir, gas filling module for cylinders with scales, pump aggregate, pipe installation,safety and regulating fittings, mounted on a common chassis.The LPG module for filling cylinders is located in the front part of the chassis, and consists ofelectronic scale, with a vertical stand, equipped with a hose and a handle with filling valveat the end.Different types of pump aggregates and LPG dispensers can be mounted , which ensures awide range of LPG filling stations.
Gas Stations
HOME
HOME
HOME
HOME
HOME
Gas Stations
LPG Pumps and Pump units HOME
HOME
Pumps and pump units
HOME
Pumps and pump units
HOME
Pumps and pump units
LPG Flow Meters HOME
KALVACHA ENGINEERING JSC manufactures and offers to itsclients two-pistol flow meters for propane-butane gas of highquality TYPE SCHWELM-KALVACHA. They are produced using aGerman technology from materials and alloys of high qualitythat provide high precision of measurement and continuousoperation at temperature range from -20 to +50 C
TECHNICAL CHARACTERISTICS
Dimensions Height 350 mmLength 330 mmWidth 120 mm
Joining dimensions Input DN25Output DN25
Outflow Recommended minimum 5 l/minRecommended maximum 60 l/min
Precision 0.5 %
Operation pressure 25 bar
Operating temperature -20º / +50º C
Weight 15 kg
LPG Master Flow meter LPG Flow meter
CNG equipment HOME
THE BASIC MODEL INCLUDES:
Body: cold bended stainless steel sheet. Includes all valves, fittings, tubing, framing and brackets.
Display panels: Stainless steel powder-coated white
Outlet pressure gauges ø63 scale 0-400 barManual outlet isolation valveInternal pipe work ½’’ 316 L stainless steel tube
Display: three line LCD displays with backlighting:
- Six 25 mm digits for price and quantity- Four 15 mm digits for unit price- Start and Stop buttons
Flow meter: Coriolis mass flow meter Smart hose: L=3,6 m. Standard is 3/8’’ (or ½’’)
hose with OPW ILB – 1 in-line breakaway with gas vent at breakaway
Nozzle: NGV1 OPW CT1000 refuelingcoupling
COMPAC - forecourt communication protocol
Emergency stop valve to terminate filling
Petrol dispensers
Additional LPG section for multi-product dispensers
HOME
KALVACHA ENGINEERING produces petrol dispensers of high quality for sale of light fuels from 5 to 50 l/min. Theseare petrol dispensers of new generation and their main characteristics are low service expenditures, longevity, highproductivity, reliability and safety at a good price.
KALVACHA ENGINEERING produces additional LPG sections for installing on multi-product dispensers.
Modular filling stations for fuels HOME
KALVACHA ENGINEERING works inpartnership with world leading Oil & Gascompanies to produce commercial andin-house modular filling stations.
The compact filling station has beendesigned for quick and easy installation,and requires only a minimum amount ofspace.
This station is intended to replace alreadyoperating sites in less than a month.
Complete filling station Module filling station for fuels
Services HOME
KALVACHA ENGINEERING OFFERS:
Calibration of LPG flow meters; Provides sale, repair, calibration and in-guarantee replacement services of flow meters, pumps, hoses, nozzles etc.; Modular facilities/premises with state-of-the-art design of aluminum millwork and double-glazed windows for your LPG fillingstation; LPG installations for industrial users; LPG installations for domestic users; Full range of spare parts for petrol and LPG filling stations; Manufacture of metal structures; Manufacture of aluminum and plastic millwork, double-glazed windows and others;
Calibration of LPG flow meters
KALVACHA ENGINEERING AD provides sale, repair, calibration and in-guarantee replacement services of flow meters, pumps, hoses,nozzles etc.The Company has also a laboratory for LPG flow meters calibration, licensed by The Bulgarian Accreditation Office. KALVACHAENGINEERING AD holds the only standard measuring device for LPG in Bulgaria, registered by the National Metrology Centre, with a0.042% relative error.KALVACHA ENGINEERING AD has also its own metrology and engineering surveillance department and has developed its own stand forcalibration of the flow meters of companies applying for LPG dispensers repair certificate, as well as methods for examination ofproduced LPG dispensers, also approved by Commission of experts.The company also performs repair, adjustment and control of LPG dispensers using its own calibrated gauge flow meters.
Partners HOME
High quality and reliability, correctness and professional treatment of our clients are highly appreciated by leading companies as:
They chose KALVACHA ENGINEERING AD as a supplier of the equipment for all company’s gas stations and petrol stations.
AGIP Romania
BUTAN GAS Romania
GAZEXIM GRUP S.R.L. Romania
LUKOIL Romania
LUKOIL Montenegro
МАКПЕТРОЛ Macedonia
OMVRomania
OMV Serbia and Montenegro
ROMPETROLRomania
TEMPO GAS DOOSerbia and Montenegro
INDIAN OILIndia
PRIMA GASGermany
JUGOPETROLSerbia I Montenegro
PARTNERS ABROAD
PARTNERS IN BULGARIA
OMV SHELL EKO PETROL ROMPETROL
Contact HOME
BULGARIAKalvacha Engineering AD
6000 Stara Zagora, PO Box 113
Head office:+ 359 (42) 600 380; + 359 (42) 602 540;
+ 359 (42) 607 540; + 359 (88) 724 05 40Fax:
+ 359 (42) 600 009Service:
+ 359 (42) 602 530; + 359 (88) 750 96 27Fax:
+ 359 (42) 643 034E-mail:
[email protected]@kalvacha.bg
Contact:
• Production and sale of gas dispensers supplied with assemblies produced by leading European companies;
• Production, sale and assembly of module gas stations with reservoir of capacity from 5 000 to 10 000 l;
• Production, sale and assembly of underground gas stations for domestic and industrial purposes;
• Production and sale of gas dispensers;
• Production and calibration of flow meters;
• Production of power switchboards for gas stations, petrol stations and for domestic purposes;
• Design, production and assembly of hoods for gas stations and petrol stations;
• Design, production and assembly of structures from aluminum joinery and metal;
• Design and construction of gas stations and petrol stations;
• Sale of computer systems for servicing and sale of fuels and other products;
• The company executes home and international transport of the production with its own trucks;
About us HOME
HOME
HOME
HOME
HOME
HOME
COMPAC C4000 Electronic Head
Kalvacha Engineeringhas chosen COMPACC4000, a highly accurateelectronic headdesigned to control andmanage the CNGdispenser. The KG80meter and all otherelectronic componentsplug directly into theC4000, which processesand calculates allrequired information.
During set-up and calibration, all parameters for the dispensers are set in the C4000.The power supply for the C4000 is housed in a separate flameproof, water proof enclosure.This ensures additional safety to the dispenser and the C4000 should any electrical fault occur.
HOME
Hydraulic ComponentsCOMPAC hydraulic components are made of pressure gradestainless steel for superior performance and corrosionresistance. They are batch numbered with traceability tomaterial certificates and production runs. This ensures thecorrect grades of materials are used and the ratings of thevalves can be guaranteed.All hydraulic components have been independently tested andthird party analysed to verify their structural safety.All valves are assembled at Compac under strict qualityprocedures and are tested on CNG.These procedures have been audited and enable Compac to CEmark the valves. The valves are designed to be reliable andeasily serviced without removing pipework.
Filter Check Valves An integrated filter with dual outlet and built-in check
valves Each filter contains a high quality coalescing filter element Capable of flow rates in excess of 50kg per minute
Solenoid Valves Pilot operated Opens at more than two times working pressure Closes with zero differential pressure Bubble tight shut-off Capable of flow rates in excess of 50kg per minute
Regulator Valves Bubble tight shut-off Tamper proof Adjustable range from 180 to 275 bar
HOME
HOMEPetrol dispensers
Spare parts HOME
Bypass ValveDifferential Valve
LPG flow meter Spare parts LPG flow meter NozzleKALVACHA ENGINEERING offers a full range of spare parts in stock, ready for dispatch.
Click here to viewFull catalog of spare parts
HOME
HOMESpare parts
HOME
HOMESpare parts
HOME
HOMESpare parts
HOME
HOMESpare parts
HOME
HOMESpare parts
HOME
HOMESpare parts
HOME
HOMESpare partsDifferential Valve
HOME
HOMESpare partsBypass Valve
HOME
HOMESpare parts
HOME
HOMESpare parts
HOME
HOME
HOME
HOME
The petrol station modules arecompact and suitable for sale offuels.
The system includes: double-walledtank with capacity 5 m3 or 10 m3,dividable in sections, ElectronicDispenser for one or two fuels, typeBKK S-1 or BKK – S – 2 (single ordouble); safety, measurement,regulatory, stop valves and fittings.
LEGEND:1. Chassis for module2. Reservoir 5, 10 m33. Petrol dispensers BKK – S – 1/ 24. Level indicator5. Angle valve 1 ¼ ‘’6. T-junction 2’’7. Fire-stop device8. Spherical valve 2’’9. Expanding container
Module petrol stations with double-walled reservoir
HOME
The station includes twomodules commercial moduleand technological module.Inside of the technologicalmodule is situated 30m3double-walled tank, suitablefor three kinds of fuels.
The systems includes: pumpaggregate, protective andregulating fittings.
The commercial module iscomfortable to use by theclients and servicing staff.It includes: Sanitary area;Storage; Kitchen room;Commercial hall; Office room;Air conditioner.The station optionally can
include an LPG or CNGunit.
HOME
HOMEPetrol dispensers
Gas Stations
HOME
Legend:
1. Three-way clock with two safety valves.
2. Electrical level indicator.
3. Outlet for liquid phase.4. Electromotor.5. Pump Kalvacha.6. Filling valve – liquid
phase.7. Monometer clock.8. Level indicator.
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
HOME
The LPG Master Flow MeterIs used for calibration and control of LPG dispensers
HOME
HOME
HOME