Date post: | 16-Apr-2017 |
Category: |
Documents |
Upload: | pallopathak |
View: | 81 times |
Download: | 1 times |
Good Laboratory Practices are maintained in Lab.
All Sophisticated Instruments are available ( Total Instruments = ) & List of the same is available.
Calibration of all Instruments is done & calibration tags are displayed.
Specifications & Test Methods for all packaging Materials are available.
Every Lot of PM is tested and record of test results are available.
Rejection Records are also maintained.
Statistical tools of Six Sigma such Histogram , Box plot , Pareto Chart etc are used for analysis of test results vendor wise. Findings of the same are used for vendor Audits.
Packaging Material Testing Lab -- Quality Assurance
Standard Samples for all bottles , Pails , Buckets and Labels are available.
Artwork of all packaging materials are available and updation of the same is done regularly.
Operating Instructions are displayed for all instruments in Lab.
ISO 9001 , ISO/TS 16949 standard requirements are implemented in the Lab. ISO 14001 & OHSAS 18001 std. requirements are being implemented in the
Lab.
5 S is under progress in Lab.
Packaging Material Testing Lab -- Quality Assurance
Packaging Material Testing Lab -- Quality Assurance
Features :
Make : M & W Precision Tools.
Digital
Used to check dimensions inside, outside, and depth measurements of bottles & caps .
Capacity : 0.0 to 150mm
Least Count : 0.01 mm
Calibration Done on : 07-08-2013
Calibration Valid upto : 06-08-2014
Vernier Caliper
Packaging Material Testing Lab -- Quality Assurance
Features :
Make : Mitutoyo Corporation
Digital
Used to measure thickness.
Measuring Range : 0.0 mm to 25.0mm
Least Count : 0.001 mm
Calibration Done on : 08-08-2013
Calibration Valid upto : 07-08-2014
Digimatic Micrometer
Features :
Make : Contech
Digital
Used for measuring the weight of caps, wad , pouches , GSM of cartons & adhesive grammage of sticker.
Capacity : 0.0 to 220g
Least Count : 0.001 g
Calibration Done on : 28-03-13
Calibration Valid upto : 27-3-14
Weighing Balance
Packaging Material Testing Lab -- Quality Assurance
Features : Make : Saurashtra Pvt. Ltd.
Digital
Used for measuring the bursting strength of paper & corrugated
box.
Capacity : 3 kg/cm2 to 40 kg/cm2
Least Count : 0.1 kg/cm2
Calibration Done on : 07-11-2013
Calibration Valid upto : 19-09-2014
Bursting Strength Tester
Packaging Material Testing Lab -- Quality Assurance
Features : Make : Rohit Instruments
Digital
Used to measure the opening or closuring torque of the screwing cap .
Capacity : 0.0 kgcm to 50 kgcm Least Count : 0.01 kgcm
Calibration done on : 11-07-13 Valid upto : 10-07-14
Torque Tester
Packaging Material Testing Lab -- Quality Assurance
Features Make : Presto
Digital
Used to measure the rub resistance of non laminated printed labels.
Capacity : Not Applicable.
Least Count : 0.001 Calibration done on : 28-05-2013 Valid upto : 28-05-2014
Scuff Resistance Tester
Packaging Material Testing Lab -- Quality Assurance
Packaging Material Testing Lab -- Quality Assurance
Features Make : Amruta Electronics
Corporation.
Digital
Used to determine the wall thickness of bottles , pails & Buckets .
Measuring Range : 0.65 to 500 mm
Least Count : 0.01 mm/ 0.001 inch
Calibration done on : 22-03-2013
Valid upto : 22-03-2014
Ultrasonic Thickness Gauge
Features
Make : Pathak Electricals
Used for delaminating the aluminium foil from the wad.
Calibration : Not Applicable
Hot Plate
Packaging Material Testing Lab -- Quality Assurance
Features Make : Mitutoyo Corporation
Digital
Used for measuring the height of bottles and Buckets .
Capacity : 0.0 – 300 mm
Least Count : 0.01 mm
Calibration done on : 15-05-13
Valid upto : 14-05-13
Height Gauge
Packaging Material Testing Lab -- Quality Assurance
Features
Make : Settra
Digital
Used for measuring the weight of bottles, buckets, caps, lids & cartons.
Capacity : 0.0 to 6.0 kg. Least Count : .1g.
Calibration done. on : 01-03-2013 Valid upto : 01-03-2014
Weighing Balance
Packaging Material Testing Lab -- Quality Assurance
Features :
Make : International Equipments
Digital
Used is test the compression strength of bottles , pails , buckets & handle strength of pails.
Capacity : 0.0 to 1000 kg
Calibration done on : 01-10-2013
Valid upto : 30-09-2014
Packaging Material Testing Lab -- Quality Assurance
Compression Strength Machine / Top load testing machine
Features :
Make : Leakon
Digital
Used to detect leakages in bottles. Leakages upto 0.17 mm hole can be detected.
Works on Compressed Air Pressure .
Capacity : Not applicable.
Calibration : Not applicable
Packaging Material Testing Lab -- Quality Assurance
Leak Tester
SOP displayed : Operation and calibration of
bursting strength. Operation and calibration of
weighing balance. Operation and calibration of
vernier caliper. Operation and calibration of
Digital micro meter. Operation and calibration of 3
digit weighing balance. Operation and calibration of 2
digit weighing balance. Operation and calibration of
Ultrasonic thickness Gauge. Operation and calibration of
digimatric height gauge Operation of Hot plate Drop test of rigid plastic
containers.
Packaging Material Testing Lab -- Quality Assurance
Packaging Material Testing Lab -- Quality Assurance