Date post: | 16-Apr-2017 |
Category: |
Documents |
Upload: | adnan-bhat |
View: | 37 times |
Download: | 1 times |
05/03/2023
Presentation on six weeks industrial training
Automobiles , Petrol and Diesel engines(overhauling)/Snow
machinesADNAN SAHIB BHAT REG NO :- 11109997
05/03/2023
Contents:-
About the department
Objectives of industrial training
Automobiles
Engine type
Engine cycle(2-4-6 stroke)
Engine parts
Basic engine service (Air filter)
Conclusion and future scope
05/03/2023
Department profile
• The Mechanical Engineering Department is a sub-department of the Govt. of Jammu And Kashmir.
• It renders support to various other govt. departments like PWD, R&B, LAWDA, PHE, and Railways.
• It acquires, supplies and maintains heavy machinery.
• It provides support to the Hospitals all over the state for their AC`s and heating systems.
• It plays a vital role during winters by supplying machinery for clearance of snow.
05/03/2023
Objectives of Industrial Training
• Acquiring knowledge about various automobile engine parts.
• An overview about the servicing and overhauling of various engine parts.
• Learning about the various engine cycles (2-4-6 stroke engines).
05/03/2023
Automobiles used in Mechanical Engineering Department
• In the training the department dealt with heavy machinery like :-
TIPPERA truck having a rear platform which can be raised at its front end, thus enabling a load to be discharged.
05/03/2023
ROAD ROLLER
A road roller is a compactor type engineering vehicle used to compact soil, gravel, concrete, or asphalt in the construction of roads and foundations
05/03/2023
SNOW CLEARING MACHINE
A snow clearing machine is used for removing snow from an area where it is not wanted, such as a driveway, sidewalk, roadway, railroad track, etc
05/03/2023
TYPES OF ENGINE
On the basis of Fuel used
Petrol ignition engine
DIESEL IGNITION ENGINE
On the basis of combustion
chamber location
INTERNAL COMBUSTION
ENGINE
External combustion
engine
On the basis of number of
cylinders
3 cylinder 4 cylinder 5 cylinder 6 cylinder 12 cylinder
05/03/2023
Engine cycle
Two –stroke engine
type of internal combustion engine which completes a power cycle in only one crankshaft revolution and with two strokes
05/03/2023
A four-stroke engine (also known as four-cycle) is an internal combustion engine in which the piston completes four separate strokes viz 1- intake. 2-compress. 3-power. 4-exhaust.
05/03/2023
• Cylinder Block• Piston• Connecting Rod• Cam• Camshaft• Combustion Chamber• Piston Rings• Inlet and Exhaust valves• Flywheel• Intake and Exhaust Manifolds• Combustion Chamber• Fuel Injector• Push rods• Rocker Arms• Fuel Injectors
Engine components
05/03/2023
Basic engine service• Servicing of Basic engine parts was done there at my industrial training like AIR FILTER FUEL FILTER
Air filter
05/03/2023
05/03/2023
Conclusion and future scope
• It was observed that the Mechanical Engineering Department is a vital department because every other Engineering department relies on it for maintenance and service of Heavy Machinery.
• Though it provides satisfactory services with the infrastructure available, it lacks on the front of technological advancement.
• The department has an everlasting future but it can thrive only with the introduction and employment of latest technologies and techniques.
05/03/2023
Thank you