Presentation Schedule for e-Poster Session NMD-ATM 2018, JW Marriot Hotel, Kolkata 15-16 th November, 2018 Screen 1 & 2 Theme: Advances in Materials Science-I Date: 15/11/2018 Time: 1:30 pm to 3:00 pm Sl. No Registration Number Name Abstract Title Organisation 1 NMD-ATM-2018R-00016 Mr Mainak Saha Cyclic Oxidation behaviour of ZrB2-20 vol.%MoSi2 Ultra High Temperature Ceramic Matrix Composite IIT Madras 2 NMD-ATM-2018R-00030 Mr MUKESH KUMAR DAS Microstructural Evolution and Mechanical Properties Determination of Electron Beam Welded Austenitic Stainless Steel JINDAL STAINLESS (HISAR) LIMITED 3 NMD-ATM-2018R-00038 Mr DINESH KUMAR MISHRA Effect of Work Hardening Behavior on Growth of Defect Structure under Nanoindentation of Cu20Ni20Al20Co20Fe20 (HEA) Coated Copper: A Molecular Dynamics Study VSSUT, BURLA 4 NMD-ATM-2018R-00041 Mr Manoj Kumar Development of Composite Thermal Barrier Coating (C-TBC) by HVOF and Plasma Spray Techniques IIT Kharagpur 5 NMD-ATM-2018R-00111 Ms swastika banthia Electrodeposited Functionally Graded Copper Based Coating for Wear and Corrosion Resistant Applications IIT Kharagpur 6 NMD-ATM-2018R-00119 Mr MANAS SRIVASTAVA Magnetic nanoparticles of LixFe3-xO4 (0.06 ≤ x ≤ 0.3) for controlled hyperthermia application IIT BHU 7 NMD-ATM-2018R-00120 Mr Mohammed Rasul Simulation and Optimization of groove rolling process for long products JSW Steel Limited, Salem Works 8 NMD-ATM-2018R-00129 R V K RAO Cladding of Cf-SiC composites with ZrB2-SiC based composites for ultra high temperature application DMRL
Transcript
Presentation Schedule for e-Poster Session
NMD-ATM 2018, JW Marriot Hotel, Kolkata
15-16th November, 2018
Screen 1 & 2
Theme: Advances in Materials Science-I Date: 15/11/2018 Time: 1:30 pm to 3:00 pm
Sl. No Registration Number Name Abstract Title Organisation
1 NMD-ATM-2018R-00016 Mr Mainak Saha Cyclic Oxidation behaviour of ZrB2-20 vol.%MoSi2 Ultra High Temperature Ceramic Matrix Composite
IIT Madras
2 NMD-ATM-2018R-00030 Mr MUKESH KUMAR DAS
Microstructural Evolution and Mechanical Properties Determination of Electron Beam Welded Austenitic Stainless Steel
JINDAL STAINLESS (HISAR) LIMITED
3 NMD-ATM-2018R-00038 Mr DINESH KUMAR MISHRA
Effect of Work Hardening Behavior on Growth of Defect Structure under Nanoindentation of Cu20Ni20Al20Co20Fe20 (HEA) Coated Copper: A Molecular Dynamics Study
VSSUT, BURLA
4 NMD-ATM-2018R-00041 Mr Manoj Kumar Development of Composite Thermal Barrier Coating (C-TBC) by HVOF and Plasma Spray Techniques
IIT Kharagpur
5 NMD-ATM-2018R-00111 Ms swastika banthia Electrodeposited Functionally Graded Copper Based Coating for Wear and Corrosion Resistant Applications
IIT Kharagpur
6 NMD-ATM-2018R-00119 Mr MANAS SRIVASTAVA
Magnetic nanoparticles of LixFe3-xO4 (0.06 ≤ x ≤ 0.3) for controlled hyperthermia application
IIT BHU
7 NMD-ATM-2018R-00120 Mr Mohammed Rasul Simulation and Optimization of groove rolling process for long products JSW Steel Limited, Salem Works
8 NMD-ATM-2018R-00129 R V K RAO Cladding of Cf-SiC composites with ZrB2-SiC based composites for ultra high temperature application
DMRL
9 NMD-ATM-2018R-00139 Mr VINEET KUMAR Investigation of mechanical properties of ZrB2 Based Copper matrix composites through in situ process using stir casting technique
IIT (BHU) VARANASI
10 NMD-ATM-2018R-00140 Ms Vaishnavi Krupa B R Microstructural Characterization of ZrO2 dispersed 9Cr ODS Steel synthesized by High Energy Ball Milling and Spark Plasma Sintering
IGCAR, Kalpakkam
11 NMD-ATM-2018R-00175 Mr Yandrapu Sagar Enhancement of Mechanical Properties of Carbon Fiber Composite by Electrophoretic deposition of Graphene based functional groups
NIT, Rourkela
12 NMD-ATM-2018R-00180 Mr Kawsar Ali Assessment of Fe-Zr intermetallics as a Nuclear Metallic Wasteform BARC
13 NMD-ATM-2018R-00191 Mr Aminul Islam In-situ tensile testing of graphene nanoplatelets reinforced shroud plasma sprayed Nickel-Aluminium coating
IIT, Patna
14 NMD-ATM-2018R-00193 Prof Ajit Behera Preferential atomic deposition and diffusion in multi-layered NiTi thin film
NIT-Rourkela
15 NMD-ATM-2018R-00241 Mr ALOK BEHERA Effect of water aging on physical and mechanical response of CFRP multi-directional laminates
VNIT, NAGPUR
16 NMD-ATM-2018R-00285 Mr SUDEEP PAUL Development of Mg-Ca based alloys for biomedical applications NIT, DURGAPUR
17 NMD-ATM-2018R-00286 Mr SANTU DEY Depth profiling of proton induced damage in Ti-6Al-4V using X-ray diffraction
Synthesis and characterization of dual matrix in-situ Al-based nanocomposites.
IIT Kharagpur
Theme: Advances in Materials Science-I :
Date: 15/11/2018 Time 3:15 pm Onwards
19 NMD-ATM-2018R-00297 Mrs Jamuna Sethi Development of a new hybrid composite with low expansion and high strength
IIT Kharagpur
20 NMD-ATM-2018R-00298 Mr KRISHNAN BANDYOPADHYAY
Estimation of intrinsic stacking fault energy of Cu-Ag binary alloys with different alloy compositions using equilibrium MD approach
NIT DURGAPUR
21 NMD-ATM-2018R-00320 Mr Sudipta Mandal Comparative study of 315keV Ar9+ irradiation in pure Vanadium and its Alloy (V-4Cr-4Ti)
VECC, Kolkata
22 NMD-ATM-2018R-00324 Mr Luv Gurnani Effects of coherency strains on the mechanical properties of bulk polycrystalline oxide ceramics
IIT Kharagpur
23 NMD-ATM-2018R-00340 Mr PRAYAS HANSA Synthesis and characterization of Cu-Al2o3-SiC hybrid composite VSSUT BURLA , ODISHA
24 NMD-ATM-2018R-00369 Mr shiva bejugama Effect of two-step sintering on properties of Nb2O5 doped ceria stabilized zirconia
NIT, Warangal
25 NMD-ATM-2018R-00370 Mr RAKESH KUMAR Role of graphene nanoplatelets reinforcement on mechanical properties of plasma sprayed Alumina-13 wt. % titania coating
IIT, Patna
Screen 3 & 4
Theme: Advances in Materials Science-II Date: 15/11/2018 Time 1:30 pm to 3:00 pm
Sl. No Registration Number Name Abstract Title Organisation
26 NMD-ATM-2018R-00371 Ms Pritha Pal Comparative study of kinetic behavior for Paracetamol, entrapped in morphologically different silica gel
Jadavpur University
27 NMD-ATM-2018R-00375 Ms Anupama Dutta Studies on Cyclic Oxidation Behaviour of Titanium Aluminide Coating developed on Ti-6Al-4V substrate by Direct Laser Cladding Process
IIT Kharagpur
28 NMD-ATM-2018R-00377 Mr Jit Sarkar Radiation Damage Study of Single Crystal Silver Nanowire IIT, Kharagpur
29 NMD-ATM-2018R-00395 Mr K Vijay Reddy Investigation of structural transformation pathway during vitrification of Ni62Nb38 metallic system: a molecular dynamics study
NIT, Rourkela
30 NMD-ATM-2018R-00397 Mr Ravi Kumar Singh Role of graphene nanoplatelets reinforcement on corrosion properties of plasma sprayed Alumina-13 wt.% Titania coating
IIT Patna
31 NMD-ATM-2018R-00398 Mr SHRESHTHA RANJAN High temperature tribological behaviour of titanium nitride coating prepared by reactive plasma spraying
IIT, PATNA
32 NMD-ATM-2018R-00402 Mr DUDALA SRINIVAS Microstructural Evolution and Grain Growth Kinetics in Al0.2CoCrFeNi High Entropy Alloy
IIT Hyderabad
33 NMD-ATM-2018R-00403 Mr Soham Mukherjee Possible transformations in Titanium based alloys IIT (BHU), Varanasi
34 NMD-ATM-2018R-00413 Mr NITESH SINHA Corrosion behaviour of Austenitic Stainless steel at different tempering temperature
I.I.T (B.H.U)
35 NMD-ATM-2018R-00415 Ms NANDITA KAYAL Electrodeposition of Ag-Cu Thin Film Coating with Advanced Mechanical and Corrosion Properties
IIT kharagpur
36 NMD-ATM-2018R-00416 Mrs SWAGATIKA MISHRA Fabrication and Characterization of CaCu3Ti4O12 - BaTiO3 - Epoxy Composite for Electronic Applications
VSSUT, BURLA
37 NMD-ATM-2018R-00417 Mr Sairam Ankata DEVELOPMENT OF SnO2 BASED THINFILM MOS GAS SENSOR IIT, Kharagpur
38 NMD-ATM-2018R-00421 Mr Sambedan Jena Electrodeposited nickel foam impregnated N-rGO-Sn-SnSb alloy sandwich nanocomposite for use as a high-rate anode for rechargeable sodium ion battery
IIT, Kharagpur
39 NMD-ATM-2018R-00426 Dr Vanam Jayaprasad Characterization and Tribological behaviour of Al Metal matrix composites
University college of engineering, JNTUK Kakinada
40 NMD-ATM-2018R-00435 Mr Parijat Pallab Jana Methodical assessment of glass transition temperature of metallic glasses using modulated temperature differential scanning calorimetry
IIT, Kharagpur
41 NMD-ATM-2018R-00439 Ms UNMESHA RAY Electrophoretically Deposited Nickel Antimony Oxide-Carbon Black Composite as Anode for Lithium-ion Batteries
IIT, KHARAGPUR
42 NMD-ATM-2018R-00446 Mr YASAM PALGUNA Microstructure and Mechanical Behaviour of Al(0.5,2)CoCrFeNiMo0.5 High Entropy Alloy
IIT, HYDERABAD
43 NMD-ATM-2018R-00449 Ms BARNASREE CHANDA Evolution of eutectic microstructure in high entropy CoCrFeNiNbx (0.45 ≤ x ≤ 0.65) alloys
IIT, Kharagpur
Theme: Advances in Materials Science- II Date: 15/11/2018 Time 3:15 pm Onwards
44 NMD-ATM-2018R-00452 Mr Sourav Das Scratch and corrosion resistant Cu-Zn alloy coatings fabricated from environment-friendly bath via pulsed potentiostatic deposition on mild steel
IIT, Kharagpur
45 NMD-ATM-2018R-00453 Mr Bihar Gaurav Effect of carbon nanotube on wear behaviour of plasma sprayed Alumina-13 wt. % titania coating
IIT, Patna
46 NMD-ATM-2018R-00454 Mr Anindya Pal Hydrothermally derived Strontium doped hydroxyapatite from Mercenaria clam shells
IIEST, Shibpur
47 NMD-ATM-2018R-00461 Ms Shakti Mishra Effect of microstructure and sintering methods on mechanical and electrical properties of MWCNT reinforced copper nanocomposites fabricated via wet chemical reduction
IIT, Kharagpur
48 NMD-ATM-2018R-00463 Mr Krishna Chaitanya Nuli Effects of carbon nanotube and/or graphene reinforcement on the mechanical performance of glass fiber/epoxy composite
NIT, Rourkela
49 NMD-ATM-2018R-00471 Ms SAMARPITA ROY Microstructure and Electrical Property of Rare Earth Oxide Doped Zinc Oxide Varistor
IIEST SHIBPUR
50 NMD-ATM-2018R-00486 Dr DEBASISH DAS Electrophoretic deposition: A promising alternative to fabricate superior electrodes for lithium ion rechargeable cells
IIT, KHARAGPUR
Screen 5 & 6
Theme: Advances in Materials Science-III Date: 15/11/2018 Time 1:30 pm to 3:00 pm
Sl. No Registration Number Name Abstract Title Organisation
51 NMD-ATM-2018R-00493 Mr Srinivasu Dasari Tensile and thermal effects on inter-ply hybrid Fibre Reinforced Polymer Composites
NIT Rourkela
52 NMD-ATM-2018R-00507 Mr Yogesh Tambe Ontology based knowledge model for manufacturing process selection
58 NMD-ATM-2018R-00572 Mr Sapan Kumar Nayak Mechanical and electrochemical behavior of Fe based amorphous / nanocrystalline coating prepared by high velocity oxy-fuel thermal spraying
IIT Kharagpur
59 NMD-ATM-2018R-00573 Mr NAMAN KUMAR BAJPAI
Synthesis and mechanical, structural charecterisation of Beach sand/Epoxy Composites
NIT, Karnataka
60 NMD-ATM-2018R-00587 Mr Souvik Ghosh Comparative analysis of neural cell differentiation on nano conductive carbon nanofillers incorporated polymeric scaffold
IIT Roorkee
61 NMD-ATM-2018R-00595 Dr Mrinmoy Garai Zr4+- Controlled Nucleation and Crystallization in Si-B-K-Mg-Al-O-F glass: Ability as SOFC sealing material
Indian Institute of Technology
62 NMD-ATM-2018R-00602 Mr Subhajit Pan Fabrication of LSGM thin films on porous anode supports by pulsed laser deposition for IT-SOFC
IIT Kharagpur
63 NMD-ATM-2018R-00620 Mr Sudip Rudra Fluorine substituted hydroxyapatite: Sintering, mechanical and bioactivity study
CSIR-CGCRI KOLKATA
64 NMD-ATM-2018R-00624 Ms Anwesha Kanjilal Creep behaviour and evolution of microstructure during creep of Sn-Ag-Cu solder alloys
IISc, Bangalore
65 NMD-ATM-2018R-00627 Dr ASHIT KRISHNA PATTANAIK
Phase diagram and some thermodynamic study on USn3 intermetallics
VECC, BIDHAN NAGAR, KOLKATA
66 NMD-ATM-2018R-00636 Mrs Silani Sahoo Effect of TiB2 reinforcement on wear performance of steel metal matrix composites produced by hot pressing method
CSIR-IMMT, Bhubaneswar
67 NMD-ATM-2018R-00639 Ms Farjana J. Sonia Understanding the electrochemical Li-storage and associated mechanical integrity of well-ordered few layer graphene and its variants
IIT, Bombay
68 NMD-ATM-2018R-00644 Mr SATISH JAISWAL Nano HA Reinforced PHAs based Biodegradable Polymer Composites for Orthopaedic Fracture Fixing Accessories
IIT, Roorkee
Theme: Advances in Materials Science- III Date: 15/11/2018 Time 3:15 pm Onwards
69 NMD-ATM-2018R-00645 Mr BIPLAB HAZRA Lubricating wear behaviour of Al-17Si-5Cu alloy after a short duration heat treatment
NIT DURGAPUR
70 NMD-ATM-2018R-00649 Mr Naishalkumar Shah Isothermal deformation and effect of strain rate sensitivity on FeCoNiCrTa eutectic high entropy alloy
IIT Madras (Chennai)
71 NMD-ATM-2018R-00652 Ms Hushnaara Jahan Hussain Hadem
Electrophoretic deposition of borate anion doped bioactive glass and study of its incorporation on the thermal and mechanical properties
IIT Kharagpur
72 NMD-ATM-2018R-00655 Mr Yogesh Prabhu Optimization of metallic glass forming compositions in Zr-Cu-Ti-Al system by thermodynamic modelling
VNIT, Nagpur
73 NMD-ATM-2018R-00659 Mr Arijit Mitra Effect of Microstructure and Bulk Macro-texture on the Electrical Resistivity of Electrodeposited Sn-Cu Lead-free Solder films
IIT Kharagpur
74 NMD-ATM-2018R-00661 Ms ANSHU DUBEY Synthesis, Mechanical, Corrosion and Biocompatibility of Mg-3Zn/HA composite through Spark Plasma sintering with gradient composition for Orthopaedic Application
IIT, Roorkee
75 NMD-ATM-2018R-00666 Dr SANDIP BYSAKH Microstructural Evolution and Ferromagnetic Shape Memory Response in Rapidly Solidified Co-Ni-Al Alloys
CGCRI, Kolkata
76 NMD-ATM-2018R-00666 K V Reddy FSW NIT Warangal
Screen 7 & 8
Theme: Advances in Materials Science-IV Date: 15/11/2018 Time 1:30 pm to 3:00 pm
Sl.No Registration Number Name Abstract Title Organisation
76 NMD-ATM-2018R-00692 Mr Satyapal Singh Grain Selector for secondary orientation control in single crystal casting of turbine blades and vanes
DMRL
77 NMD-ATM-2018R-00693 Mr Vaibhav Jain Multiscale Composite Material for Structural Application based on Graphene, Carbon Fiber andReinforced Epoxy
IIT Roorkee
78 NMD-ATM-2018R-00747 Mr Sanjay Kumar A complete review on natural fiber reinforced polymer composites NITK, Surathkal
79 NMD-ATM-2018R-00757 Mr MUKESH RAUSHAN KUMAR
Drop Calorimetric measurement on lead free solder In-Sn System IIT (BHU)
80 NMD-ATM-2018R-00759 Mr PRAVEEN JEYACHANDRAN
BIOGLASS/THERMOPLASTIC COMPOSITE FOR BIOMEDICAL APPLICATIONS USING 3DP
NIT, Karnataka
81 NMD-ATM-2018R-00776 Mr DEEPAK Paliwal Effect of process parameters on the Aluminium-Steel joint by TIG-MIG hybrid welding
IIT, Indore
82 NMD-ATM-2018R-00788 Mrs Somoshree Sengupta Effect of magneto acoustic stimulation on the efficacy of anti-cancer drug and cancer cellular activities
CGCRI, Kolkata
83 NMD-ATM-2018R-00789 Ms AKRITY ANAND Tribocorrosion behavior of plasma sprayed in-situ formed TiB-TiN reinforced Ti6Al4V alloy composite coatings
CSIR-CGCIR, Kolkata
84 NMD-ATM-2018R-00798 Mr SACHIN PATIL SAE 4330 wear life improvement by pulsed plasma nitriding and chromium plating and its comparison with raw material
Bharat forge ltd.
85 NMD-ATM-2018R-00801 Mr Merajul Haque Ansari Optimization of Post Weld Heat Treatment Cycle for TIG Welded Martensitic Grade Stainless Steels
BIT SINDRI
86 NMD-ATM-2018R-00805 Dr Aniruddha Pal Synthesis and Characterization of Poly (Glycerol Sebacate) and Poly (Methyl Acrylate) Based Copolymer through Atom Transfer Radical Polymerization for Tissue Engineering Applications
CSIR-CGCRI, KOLKATA
87 NMD-ATM-2018R-00819 Mr RAJAKISHORE SAHOO Assessment of Mechanical Properties of Cyclically Aged Nickel Based Low Pressure Turbine Rotor Blade by Miniature Specimen Technique
88 NMD-ATM-2018R-00813 Mr TAPAS KUMAR SAHOO Morphological Instability of γ′ Precipitates in a Nickel Base Superalloy: Continuous Vs. Cyclic Thermal Ageing
IMMT
89 NMD-ATM-2018R-00493 Mr Srinivasu Dasari Tensile and thermal effects on inter-ply hybrid Fibre Reinforced Polymer Composites
NIT Rourkela
90 NMD-ATM-2018R-00340 Mr PRAYAS HANSA Synthesis and characterization of Cu-Al2o3-SiC hybrid composite VSSUT BURLA , ODISHA
92 NMD-ATM-2018R-00296 Yunis Synthesis of Ti3AlC2- MAX phase using Spark Plasma Sintering Technique
BARC
93 NMD-ATM-2018R-00403 Soham Mukherjee Possible transformation in Ti based alloys IIT BHU
Theme: Advances in Materials Science- IV Date: 15/11/2018 Time 3:15 pm Onwards
94 NMD-ATM-2018R-00375 Anupama Dutta Studies on Cyclic Oxidation Behavior of Titanium Aluminide Coating developed on Ti-6Al-4V substrate by Direct Laser Cladding Process
IIT Kharagpur
Screen 9 & 10
Theme: Product-I
Date: 15/11/2018 Time 1:30 pm to 3:00 pm
Sl. No
Registration Number Name Abstract Title Organisation
1 NMD-ATM-2018R-00050 Dr Anish Karmakar Development of different novel microstructures and their properties in low carbon steel
NIT, Warangal
2 NMD-ATM-2018R-00052 Mr C M Thakur Improvement of Scum Defect to enhance Yield of Skin Panel for Automotive Applications
TATA STEEL Ltd
3 NMD-ATM-2018R-00056 Mr Gopinath Shit Effect of γ-ray radiation on Microstructure and Corrosion Resistance of UFG of type 304 L Stainless Steel
Department of Atomic Energy
4 NMD-ATM-2018R-00098 Dr Priya Ranganathan
Development of Ferritic Steel-Zr-Noble Metal Fission Product-U Metal Waste Form Alloys and Corrosion Resistance Behavior in Simulated Ground Water Media
IGCAR, Kalpakkam
5 NMD-ATM-2018R-00125 Mr Anoop K Improvement in Roughness Peak Count of Interstitial Free Steels for Automotive Exterior Panels
TATA STEEL Ltd
6 NMD-ATM-2018R-00130 Mr Souvik Das Breakage of High Carbon Spring Steel Grade Steel Wires during Manufacturing: A Metallurgical Investigation
Tata Steel Ltd
7 NMD-ATM-2018R-00136 Mr LOHITENDU BADU
Successful Rolling of Wide Parallel flange Beam(WPB) in MSM in Durgapur Steel Plant
SAIL /DSP
8 NMD-ATM-2018R-00137 Mr RADHA KANTA NANDI
Study of Bending Problem in Thermo-Mechanically Treated (TMT) Bar TATA STEEL LTD
9 NMD-ATM-2018R-00143 Ms SHUCHI KARN Application of Neural Networks to Predict the Width Variation in Hot Strip Mill
TATA STEEL LIMITED
10 NMD-ATM-2018R-00153 Mr JAGADEESH S B Failure analysis of piping defect in wire rod mill JSW STEEL LTD
11 NMD-ATM-2018R-00153 Mr JAGADEESH S B Failure analysis of piping defect in wire rod mill JSW STEEL LTD
12 NMD-ATM-2018R-00155 Mr Kondababu Kadali Effect of Solutionization on Corrosion Behavior of As-Cast AZ80 Magnesium Alloy
IIT,Kanpur
13 NMD-ATM-2018R-00234 Ms URBI PAL Failure Analysis of Lance Pipe at Lime plant TATA STEEL Ltd
14 NMD-ATM-2018R-00253 Mr Anand K S Effect of milling time on microstructural and room temperature soft magnetic properties of mechanically alloyed (Fe0.50Ni0.5)70.5B17.7Si7.8Ti4 alloy
IIT, Kharagpur
15 NMD-ATM-2018R-00256 Ms Ankita Bhattacharya
Effect of C and Mn on microstructure and mechanical properties of medium-Mn steels
IIT, Kharagpur
16 NMD-ATM-2018R-00280 Dr Sourabh Chatterjee
Development of High Phosphorous Steel for High Temperature Applications
Tata Steel Ltd
17 NMD-ATM-2018R-00282 Mr SUSHIL KUMAR Effect of thermal cycling on the morphology of hydrides in Zr-2.5Nb pressure tube alloy
BIT SINDRI DHANBAD
18 NMD-ATM-2018R-00305 Mr Md serfraj Alam Development of DMR 249 Gr.A normalized steel plate at BSP RDCIS, SAIL,Ranchi
Theme: Product-I Date: 15/11/2018 Time 3:15 pm Onwards
19 NMD-ATM-2018R-00323 Ms SUJITHA R Product and Process Design Optimization in Developing Electrical Steel Grades with Superior Magnetic Properties
JSW STEEL LTD
20 NMD-ATM-2018R-00351 Mr Elamathiraja R Reduction of Decarburization in wire rod products through process optimization
JSW, Salem
21 NMD-ATM-2018R-00380 Dr Papa Rao Mondi Study on Property variation during Continuous Annealing of High Strength Dual Phase Steel
JSW Steel Ltd.
22 NMD-ATM-2018R-00384 Ms Deepshree Awale Creep studies of dissimilar weld joint between austenitic 316LN stainless steel and ferritic Mod 9Cr1Mo steels
VNIT, Nagpur
23 NMD-ATM-2018R-00388 Mr Nemai Chandra Gorain
Bake-Hardanable steel with enhanced shelf life Tata Steel
24 NMD-ATM-2018R-00394 Dr Ratnesh kumar Gupta
Study of process technology and effect of rolling parameter on quality of IS 1786:2008 Fe500S rebar
NIFFT Ranchi
25 NMD-ATM-2018R-00401 Mr Biswajit Panja Optimization of operating parameters for production of higher strength steel in high speed wire rod mill
SAIL-IISCO Steel Plant(ISP)
26 NMD-ATM-2018R-00432 Mr GIRENDRA KUMAR
Ratcheting strain accumulation due to asymmetric stress controlled cyclic loading of SA333 Gr-6 C-Mn steel at elevated temperatures
NIT, JAMSHEDPUR
27 NMD-ATM-2018R-00451 Mr BIDYUT DUTTA How Precipitation affects the Hydrogen Embrittlement of Inconel 718? IIT Bombay
28 NMD-ATM-2018R-00495 Mr PAVANKUMAR SONDAR
FAILURE OF A COOLING WATER PUMP SHAFT NIT, KARNATAKA
29 NMD-ATM-2018R-00509 Mr Saikat De Development of high carbon alloy steel for automotive applications at IISCO Steel Plant
SAIL ISP
30 NMD-ATM-2018R-00532 Dr Krishnendu Mukherjee
Modeling of stress-strain curves for AHSS through crystal plasticity modelling
CSIR-NML
31 NMD-ATM-2018R-00542 Mr Ravichandar D Behaviour of Hydrogen in Steel Post Continuous casting and Hot Rolling JSW Steel Limited, Salem Works
32 NMD-ATM-2018R-00547 Mr Deepak Kamal Improving Process Capability in High Strength Hot Rolled Steel with 550MPa Yield Strength
JSW Steel Limited
Screen 11 & 12
Theme: Product-II Date: 15/11/2018 Time 1:30 pm to 3:00 pm
Sl. No
Registration Number Name Abstract Title Organisation
33 NMD-ATM-2018R-00556 Mr GOVARDHANA POOJARI
Effect of microstructural heterogeneity and inclusions on the transverse ductility of ultra high strength steel
IIT KHARAGPUR
34 NMD-ATM-2018R-00559 Mr Chandra Sekhar Madas
Development of Rolling Pass Schedule for 200X200X12000mm3 Blooms as Alternate Input
RINL
35 NMD-ATM-2018R-00593 Mr Manindra Manna Characterization of industrially produced galvannealed coating by Open circuit potential (OCP) measurement technique
Tata Steel Ltd
36 NMD-ATM-2018R-00607 Ms Bramaramba Ventrapragada
Application of spheroidal graphite iron as a low temperature material Nit ROURKELA
37 NMD-ATM-2018R-00637 Mrs Poulami Chakraborty
Effect of alloying elements on the corrosion behavior of RAFM steels in Lead-Lithium eutectic
Bhabha Atomic Research Center
38 NMD-ATM-2018R-00679 Mr Vaibhav Kathavate
Prevention and Monitoring of Marine Corrosion in Subsea Structure by Cathodic Protection System
IIT, Indore
39 NMD-ATM-2018R-00691 Mr Akash Bhattacharjee
Optimization of precipitate distribution, heating schedule and prior cold reduction to facilitate desired recrystallization during inter-critical annealing
TRDDC, TCS Research, TCS
40 NMD-ATM-2018R-00702 Mrs Sarbari Ganguly Prediction of CCT diagram of steel using an ANN-based model Tata Steel Ltd.
41 NMD-ATM-2018R-00742 Mr Shubhadeep Maity
Evolution of Vacancy Ordered Phase in Al-Cu-Ni Alloys National Institute Of Technology
42 NMD-ATM-2018R-00752 Mr Baqar Mohiuddin A Review on Gear Fault Vibration Analysis Technique VTU BELGAVI
43 NMD-ATM-2018R-00764 Mr Rinku Singroha Elimination of Edge Type Sliver defect in 300 Series Austenitic Stainless Steel
Jindal Stainless Hissar Limited
44 NMD-ATM-2018R-00765 Mr SUBHRO ROY CHOWDHURY
Cost effective manufacturing of Duplex Stainless Steel Grade UNS S32205 by improving Hot Workability in industrial scale
JINDAL STAINLESS LIMITED JAJPUR
45 NMD-ATM-2018R-00766 Mr SOUMYAKANTA DAS
Properties Optimization of 409L Grade Stainless Steel by Controlling Process Parameters
JINDAL STAINLESS LIMITED
46 NMD-ATM-2018R-00772 Mr Amit Kumar Mohanty
Stabilized Ferritic Stainless Steel for use in Elevator Jindal Stainless Limited
47 NMD-ATM-2018R-00777 Mr Santosh Mane Effect of Subcritical Annealing Temperature on Microstructure and Mechanical properties of cold forged AISI 1552 steel
Bharat Forge Limited
48 NMD-ATM-2018R-00802 Mr Pravin Jadhav Effect of billet manufacturing process on fatigue strength of forged component
Bharat Forge Ltd
49 NMD-ATM-2018R-00803 Mr Shital Jadhav Elimination of iso-annealing heat treatment for Case Carburized forging steel
Bhrat forge,ltd,Pune
50 NMD-ATM-2018R-00804 Mr Mohan Mehta ANALYSIS OF STRENGTHENING MECHANISMS IN PLASTICALLY DEFORMED Al 6082 ALLOY
Bharat Forge Ltd
Theme: Product-II
Date: 15/11/2018 Time 3:15 pm Onwards
51 NMD-ATM-2018R-00808 Mr afroz shaikh Comparative study of mechanical properties of two low alloy steel Bharat Forge Ltd.
52 NMD-ATM-2018R-00827 Dr Mandyam Sridhar New Surface Technology down selection for large sized diesel engines using custom built scaled down
GE Global Research
53 NMD-ATM-2018R-00839 Mr Vinayak Dakre Effect of First Step Time in Two-Step Austempering process on Austempered Ductile Iron
Visvesvaraya National Institute of Technology
54 NMD-ATM-2018R-00762 Mr Amit Powar Comparision of Subcritical and Intercritical annealing for spheroidization treatment
Bharat Forge Ltd, Pune
55 NMD-ATM-2018R-00350 Mr Ashish Vaidya Creep Life Assessment of Grade 92 Steel using V-notch Specimens VNIT, Nagpur
56 NMD-ATM-2018R-00959 B Roy Introduction of die lubrication system at Wheel and Axle Plant RDCIS, Ranchi
57 NMD-ATM-2018R-00898 Ashwani Kumar Processing and Characterization of 14YWT and 14LWT ODS steel: A Comparative Study
IIT Kanpur
58 NMD-ATM-2018R-00985 BISWAJIT MOHANTY Dry sliding wear behavior of high carbon steel and high manganese steel VSSUT, Burla
59 NMD-ATM-2018R-00971 Hrudyananda Prusty Effect of Inter-critical heat treatment on the microstructure and mechanical properties of medium manganese steel
VSSUT, Burla
60 NMD-ATM-2018R-00059 M. Palakursi PRODUCTION ENHANCEMENT IN HOT STRIP MILL OF ROURKELA STEEL PLANT
RSP, Rourkela
61 NMD-ATM-2018R-00351 Rajendran Edison Reduction of Decarburization in wire rod products through process optimization
JSW Steel Ltd, Salem
62 NMD-ATM-2018R-00150 Mr. Prakash Gupta Processing microstructures,Textures and Mechanical properties of Ultra-high Strength Steel Sheet
63 NMD-ATM-2018R-00668 Mousumi Das Residual stress of ductile materials evaluate by instrumented indentation technique
CSIR-NML
64 NMD-ATM-2018R-00532 Krisnendu Mukherjee Modeling of stress-strain curve for AHSS through crystal plasticity modeling
CSIR-NML
65 NMD-ATM-2018R-00532 DK Singh A study on effect of notches-discontinuity on ductility property of rebar Tata Steel Ltd
Screen 13 & 14
Theme: Non-Ferrous
Date: 15/11/2018 Time-1:30 pm to 3:00 pm
1 NMD-ATM-2018R-00106 Mr Pradyut Sengupta
Comparative Evaluation of Density, Microstructure, and Nano-mechanical Properties of 95W-3.5Ni-1.5Fe (wt.%) Heavy Alloys Prepared from Un-milled and Ball-milled Powders CSIR-IMMT
2 NMD-ATM-2018R-00169 Mr UZWAL KIRAN ROKKALA
Invitro degradation behavior of Mg-Zn-Gd alloy through static and dynamic immersion studies
NIT KARNATAKA
3 NMD-ATM-2018R-00184 Dr Shailesh Kumar Singh
Microstructural Evolution Analysis during Friction stir welding of 2024 Aluminium alloy
4 NMD-ATM-2018R-00198 Dr AMIT JOSHI Cyclic Deformation Behaviour of Ultrafine Grained Al 2014 Alloy G. B. PANT INSTITUTE OF ENGINEERING AND TECHNOLOGY GHURDAURI PAURI
5 NMD-ATM-2018R-00226 Mr SK MD ARIF Study the Low Cycle Fatigue on 7055 Aluminium Alloy at Two Stage Age Hardening Condition―
NIT Durgapur
6 NMD-ATM-2018R-00279 Ms Prekshya Nath Structure property correlation of thermomechanically treated Ti-6Al-4V alloy IIT Kharagpur
7 NMD-ATM-2018R-00284 Mr Debottam Goswami
Effect of Ball Milling on the Magnetocaloric Performance of a Ni-Mn-Ga Alloy IIT- Kharagpur
8 NMD-ATM-2018R-00299 Mr Amit Joshi Correlation of Fracture Toughness with Microstructural Features For Cryorolled and Warm Rolled Al 2014 Alloy
G. B. PANT INSTITUTE of ENGINEERING TECHNOLOGY, PAURI
9 NMD-ATM-2018R-00420 Mr Shivendra Sinha Reclamation of Zinc from Zinc Dross as High purity Sulphate salts CSIR-NML Jamshedpur
10 NMD-ATM-2018R-00429 Mr Sushobhan Kobi Structural (in)stability and spontaneous cracking of Li-La-Zirconate garnet based solid electrolyte and effects of dopants towards alleviating the same
IIT Bombay
11 NMD-ATM-2018R-00457 Mr Aneesh Patil Effect of ECAP process parameters on mechanical and corrosion behaviour of Mg-Zn-Gd alloy
13 NMD-ATM-2018R-00491 Mr Rohit Anand Design and Fabrication of Li-Air Battery with Solid Electrolyte(Li7La3Zr2O12) IIT Bhubaneswar
14 NMD-ATM-2018R-00521 Ms Monalisa Mandal The effect of microstructure on the creep behavior of the semi-solid state rolled Al-4.5Cu-5TiB2 in-situ composite
IIT Kharagpur
15 NMD-ATM-2018R-00535 Ms MONIKA GAUTAM Study of microstructural and mechanical properties of in-situ Al3Ti particle reinforced Al-Cu matrix composite
IIT BHU
Theme: Non-Ferrous
Date: 15/11/2018 Time-3:15 pm Onwards
16 NMD-ATM-2018R-00538 Mr BABUL DAS Microstructural and mechanical analysis of in-situ Al3Ti reinforced Al-4.5wt%Cu alloy matrix composite
IIT BHU
17 NMD-ATM-2018R-00592 Dr SHYAMAL KUMAR MAITY
Electrochemical Recycling of Zinc Dross to Zinc Metal CSIR-NML
18 NMD-ATM-2018R-00616 Ms ANURADHA JANA Effect of heat treatment on mechanical, corrosion and bioactivity of Mg-Zr-Nd-Y alloy
CSIR-CGCIR, KOLKATA
19 NMD-ATM-2018R-00738 Mr AVINASH RAVI RAJA
Parametric Analysis of TIG welding of Commercially Pure Titanium IIT (BHU), Varanasi
20 NMD-ATM-2018R-00821 Mr Santosh Kumar changed to Sandip Sutar
High Temperature Deformation Behavior of Nickel Based Superalloys Bharat Forge Limited
21 NMD-ATM-2018R-00096 Mr CHANDRAKANT PARLIKAR
Effect of Pt-Aluminide (PtAl) Bond Coat Thickness on Tensile Properties of Directionally Solidified Ni-Base Superalloy CM247LC
Defence Metallurgical Research Labratory
22 NMD-ATM-2018R-00126 Mr Kotla Sairam Goud Texture reversibility in Mg AZ31 alloy by twinning under multi axial compression: Influence on flow behavior
IIT Hyderabad
23 NMD-ATM-2018R-00311 Arnomitra Chatterjee Inter-comparison of Strength Values of Zr-2.5%Nb alloy Estimated through Miniaturized Disc Bend Test, Nanoindentation & Conventional Tensile Tests
BARC
24 NMD-ATM-2018R-00723 Venkateswara Rao Mannava
High temperature oxidation of directional solidified GTD111 superalloy at 900C
IIT Madras
25 NMD-ATM-2018R-00148 Mr Subha sanket Panda
Effect of Aging treatment on the fatigue behavior of cast AZ80 magnesium alloy
IIT Kanpur
Screen 15 & 16
Theme: Process, Raw Material and Energey and Environment - I
Date: 15/11/2018 Time: 1:30pm to 3:00pm
1 NMD-ATM-2018R-00076 Mr Acharyulu AVB Sustaining Sinter Tumbler Index, RDI and RI with High LOI Iron Ore Fines using Statistical Analysis JSW Steel Ltd
2 NMD-ATM-2018R-00076 Mr Acharyulu AVB
Optimization of Sinter Productivity, Fuel Consumption with High LOI Iron Ore Fines JSW Steel Ltd
3 NMD-ATM-2018R-00112 Mr Vidhyasagar M Performance of Energy Optimizing Furnace for primary steel making JSW Steel Limited-Salem Works
4 NMD-ATM-2018R-00113 Ms MANISHA SAHOO Effect of Scrap Addition in Blast Furnace on CO2 Emissions:A Life Cycle Analysis Approach
INDIAN INSTITUTE OF TECHNOLOGY
5 NMD-ATM-2018R-00123 Mr Arun Manjar Development of blast furnace hearth liquid level monitoring system Jindal steel and power limited
6 NMD-ATM-2018R-00161 Mr Sekar Ranganathan Avoiding production loss due to skip car axle failure in Blast FurnaceŠ at JSW Steel Limited, Salem works JSW Steel ltd., Salem
7 NMD-ATM-2018R-00178 Mrs Ritu Lahre Reducing Sulphur Pick-up in Automotive Grades at Primary Steel Making Process (BOF Operation)
JSW STEEL LIMITED, VIJAYANAGAR
8 NMD-ATM-2018R-00218 Mr Ravi Sagar An Innovative Method to Determine Generated Internal Stress Inside Roasted Iron Ore Pellets
JSW steel limited Vijayanagar
9 NMD-ATM-2018R-00271 Ms Vishakha Singh Heating of coal tar pitch in controlled atmosphere to produce lump needle coke NIT JAMSHEDPUR
10 NMD-ATM-2018R-00289 Mr HRISHIKESH KUMAR Coke Making and its importance with developments. Tata Steel Ltd.
11 NMD-ATM-2018R-00325 Mr SATENDRA KUMAR Effect of loss on ignition of iron ore on sinter quality and productivity JSW Steel
12 NMD-ATM-2018R-00325 Mr SATENDRA KUMAR Effect of loss on ignition of iron ore on sinter quality and productivity JSW Steel
13 NMD-ATM-2018R-00331 Mr MUKUND MANISH Reduction in Tundish loss in 8 strand billet caster JSW Steel Ltd.
14 NMD-ATM-2018R-00339 Mr Chandan Sarkar Utilization of coke fines in sintering of iron ore with higher micro-fines content - A Vizag Steel perspective
RINL - Visakhapatnam Steel Plant
15 NMD-ATM-2018R-00352 Mr Antariksh Gupta Simulation of Vortex Formation during Tundish Teeming RDCIS, SAIL
16 NMD-ATM-2018R-00366 Mr Shreyas Puttige Study of Clogging in Al-Si killed Low Carbon Steels during Slab Casting Tata Steel Limited
17 NMD-ATM-2018R-00466 Ms Snigdha Ghosh Shape of static hold up in blast furnace dripping zone IIT Bombay
18 NMD-ATM-2018R-00480 Mrs Y USHA Process Modelling and Optimization of melt spinning drum process parameters for the production of amorphous alloys CSIR-NML
Theme: Process, Raw Material and Energey and Environment-I
Date: 15/11/2018 Time: 3:15 pm onwards
19 NMD-ATM-2018R-00494 Mr Maharshi Ghosh Dastidar
Effect of Alkali present in Iron Ore on Direct Reduction using Box Behnken Design Modelling Jadavpur University
20 NMD-ATM-2018R-00530 Mr Ramesh Babu Penumala Modernization of Blast Furnace stoves at Visakhapatnam Steel Plant RINL visakhapatnam
Screen 17 & 18
Theme: Process, Raw Material and Energy and Environment -II
Date: 15/11/2018 Time: 1:30pm TO3:00 pm
21 NMD-ATM-2018R-00563 Dr Dayanand Paswan Softening melting behavior of high alumina blast furnace slag CSIR-NML, Jamshedpur
22 NMD-ATM-2018R-00580
Mr Mithilesh Kumar
Singh Relation of Sinter Reducibility Index with machine operating conditions RDCIS, SAIL
23 NMD-ATM-2018R-00622 Mr AMIT SARKAR Controlling Nitrogen Pickup in IF STEEL at JSW JSW STEEL LIMITED
24 NMD-ATM-2018R-00622 Mr AMIT SARKAR Controlling Nitrogen Pickup in IF STEEL at JSW JSW STEEL LIMITED
25 NMD-ATM-2018R-00754 Mr Ritwik Das
Feasibility Study of Rolling of Reduced Composite Briquette made with Iron
Ore, Graphite, Flu Dust and Fly Ash as a Binder
National Institute of
Technology Durgapur
26 NMD-ATM-2018R-00755
Mr Sheikh Khairul
Basar
Modification in Mixing and Nodulizing Drum for Minimizing the chemistry
variation of Green Mix for Sinter making
Steel Authority Of
India Ltd.
27 NMD-ATM-2018R-00800 Ms Meghna Mondal Agglomeration of sinter return fines for process improvement in Ironmaking Tata Steel
28
NMD-ATM-2018R-
00860(offline) Mr. Harish Bhat Mixing and microgranualtion of ultrafine iron ores in sinter plant Eirich India Pvt.Ltd.
29 NMD-ATM-2018R-00874 Dilip Sarkar WGR and MEROS system – Integrated state of the art sinter gas cleaning
Prime Metals
Technology
30 NMD-ATM-2018R-00880 Abhijit Mondal Latest Improvements in Shaft Based Scrap Preheating Furnaces (QUANTUM)
Prime Metals
Technology
31 NMD-ATM-2018R-00527
Mr. Rajaguru
Madasamy Prototype to track mould oscillation in CCMs RINL
32 NMD-ATM-2018R-00268 Ms Sagarika Nanda
Behaviour of particle size on froth flotation performance of lead-zinc sulphide
ores IIT(ISM)Dhanbad
33 NMD-ATM-2018R-00972 M Varma Raju
Value generation through recycling of dust and sludge in integrated steel
plant
JSW Steel Ltd,
Vijayanagar
34 NMD-ATM-2018R-00281
Mr Ghanshyam Das
Maheshwari
Exploring use of Air Cooled Blast Furnace Slag (ACBFS) in construction of rigid
pavement RDCIS, SAIL
35 NMD-ATM-2018R-00525
Dr Rajarthinam
Sivakumar
Studies on weathering of steel slag for volume stabilization and free lime
reduction using pressurized steam injection - a possible way to recycle
RINL visakhapatnam
Steel Plant
36 NMD-ATM-2018R-00540 Mr SATYENDRA SINGH
Studies on treatment of BFGCP effluent in terms of select normative
constituents for improved recycling/discharge RDCIS/SAIL, Ranchi
37 NMD-ATM-2018R-008790 Shravan Kumar Simulation of External Desiliconization of Hot Metal Ferrochrome Tata Steel Ltd
