ECMP Thin ClientPRESENTATION TO UIDAI

27 June 2019

Session Management• Every operator sync/online login will result in the creation of a

session with unique key• The OTP generated during the operator sync request should be

saved so that it can be used as a resume password during the login• The session will be created in the Integrity verification service and

stored in the session database• The session information will be encrypted with the resume

password and stored in the ECMP client• The operator has to enter the resume password for each login• The system validates that the operator has valid session during login

and if not, asks operator to do an operator sync

Session Management• During the login, operator will have to provide below details along

with the resume password

• Operator ID

• Operator Name

• Password

• Biometrics

• Resume Password (OTP)

• When the operator enters the correct details, he/she will be

allowed to login to ECMP client

Login Page● Resume password is added to Login page●

Incorrect Resume Password● Incorrect Resume Password by operator

Incorrect Resume Password Attempts● Maximum 3 attempts are allowed for incorrect resume password

Synchronize Operator Details option ● Synchronize Operator Details option is added as part of

processes tab

Synchronize Operator Details Page ● The OTP sent to registered mobile number of the

operator should be used as resume password for login. Please remember the OTP received

Automated Packet Sync and Upload

• Packets will be synced and uploaded automatically in the background when the station is online(has internet access). The operator need not be logged in for sync/upload to happen.

• The client will no longer have the sync and full sync options on the client and this will happen automatically.

• The exporting of packets and upload into SFTP client is no longer required.

• The approval process has been removed and the packets will be signed by the operator session that it was created in.

• The status of the packet will start as “approved” by default and will change to “synced” and then “uploaded”

• There are additional validations to ensure that the packets are not tampered with.

View Enrolment Details

The view enrolment details screen displays the list of enrolments with the status

Packet Statuses• When the packet is created, it will be in Approved status• When the packet is synced to the enrolment service, the status of

the packet will be set as “Synced”• When the packet is uploaded to the enrolment service, the status of

the packet will be set as “Uploaded”

Release Impacts• Login with resume password (OTP)• Aadhaar SFTP client will be decommissioned• Manual Packet sync, Supervisor/Introducer end of day review has

been removed

• The Hold/Reject statuses have been removed

• Export of packets feature has been removed (The packets will be

uploaded from the same ECMP client where the packets have been

created)

Export Enrolment Details page is removed

THANK YOU