15
PB3010 family Fanless Box PCs with Intel® Ivy Bridge platform – 3 rd generation of Core i processors – and double digital video output
PB3010 family Fanless Box PCs with Intel® Ivy Bridge platform – 3rd generation of Core i processors – and double digital video output
PB3010 - Highlights • Fanless Box PC (0÷50°C operating temperature)
• ASEM STANDARDS compliants
• Intel® Ivy Bridge platform (3rd generation Core i platform) – Celeron® 1047UE 1,4 GHz, 2 cores – 2 threads - 2MB Smart Cache – 17W – Celeron® 1020E 2,2 GHz, 2 cores – 2 threads - 2MB Smart Cache – 35W – Core® i3 3120ME 2,4 GHz, 2 cores – 4 threads - 3 MB Smart Cache – 35W – Core® i5 3610ME 2,7 GHz, 2 cores – 4 threads - 3 MB Smart Cache – 35W – Core® i7 3612QE 2,1 GHz, 4 cores – 8 threads - 6 MB Smart Cache – 35W
• RAM System memory expandable up to 16GB
• Doppia uscita video separata 1 x DVI-I e 1 x DVI-D
• PCI/PCIe x4 espansion slot (S1 version)
• Supports Win Xp, Win 7, Win 8 and Linux operating systems
• Fast mass storage devices mSATA SSD with SATA II and 2,5” HDD/SSD with SATA III interface
• 24V DC power supply with galvanic isolation and optionally – UPS with external battery pack – Kit for ATX mode power supply functionality
2
PB3010 – PB3000 comparison
• Same configurations of PB3000 systems
• Added
– Double video output independent • 1 x DVI-I (DVI-D or VGA with adapter)
• 1 x DVI-D
• Not available
– Direct VGA output
– Two MiniPCI slots
– PS/2 connector
3
PB3010 - Long term availability
4
PB3010 - ASEM Standards
Isolated Power supply with galvanic isolation to prevent: • Common mode noise at low/medium frequencies on the power
supply line • Ground loop noise • Extra-voltage caused by lightning and to guarantee • Power supply with grounded positive terminal (e.g. Japan)
UPS integrated in the internal power pack • With external battery pack - rear of the system mounting • With external battery pack - standalone wall mounting
5
PB3010 – Technical features vs PB3000
6
PB3010 PB3000 VIDEO CONTROLLER Intel® Celeron™ 1047E, 1.40GHz, 2 cores / 2 threads, 2MB Smart cache, 17W, 22nm technology
Intel® Celeron™ 1020E, 2.20GHz, 2 cores / 2 threads, 2MB Smart cache, 35W, 22nm technology Intel® Core™ i3-3120ME, 2.40GHz, 2 cores / 4 threads, 3MB Smart cache, 35W, 22nm technology Intel® Core™ i5-3610ME, 2.70GHz (3.3GHz Turbo), 2 cores / 4 threads, 3MB Smart cache, 35W, 22nm technology Intel® Core™ i7-3612QE, 2.1GHz (3.1GHz Turbo), 4 cores / 8 threads, 6MB Smart cache, 35W, 22nm technology
CHIPSET Intel® HM76 Express Chipset
VIDEO CONTROLLER Intel® HD Graphics, 650MHz integrated in Celeron™microprocessor Intel® HD Graphics 4000, 650MHz integrated in Core™microprocessor
VIDEO OUTPUT 1 x DVI-I (Single Link, DVI-D or VGA with adapter) 1 x DVI-D (Single Link)
1 x DVI-I (Single Link) or 1 x VGA
SYSTEM MEMORY – RAM 2GB / 4GB / 8GB / 16GB
MASS STORAGE 1 bootable CFast SATA 2 3Gb/s embedded on board with external access 1 x SSD 2,5" or 1 x HDD 2,5" SATA 3 6Gb/s 1 x SSD mSATA SATA 2 3Gb/s
PS/2 - 1 x PS/2 Keyboard & Mouse
LAN 3 x LAN 10/100/1000Mbps (2 x Intel® 82574L, 1 x Intel 82579)
USB 2 x USB 3.0 2 x USB 2.0
SERIAL 1 x RS232 (DB9M)
ADD-ON INTERFACES (optional – max 1)
2 x RS232 (DB9M) 2 x USB 2.0 1 x RS232/422/485 (DB15M)+ 1 x USB 2.0 1 x RS232/422/485 (DB15M) optoisolated + 1 x USB 2.0 1 x LAN 10/100/1000Mbps, Intel® 82574L Unmanaged Ethernet Switch 4 x 10/100/1000Mbps
EXPANSION SLOTS S0 - 2 x MiniPCI dedicated to ASEM fieldbuses, I/O and NVRAM boards
S1 1 x PCI or 1 x PCIe x4 (5 Gb/s) 2 x MiniPCI dedicated to ASEM fieldbuses, I/O and NVRAM boards 1 x PCI or 1 x PCIe x4 (5 Gb/s)
POWER SUPPLY UNIT 24VDC isolated UPS (optional) with external battery module ATX Mode push button (optional)
OPERATING TEMPERATURE 0°- 50°C; 0°- 45°C with HDD 24x7; 5°- 45°C with standard HDD
PB3010 - Motherboard 1152, top
7
Power supply module
3 x LAN 10/100/1000 DVI-D
RAM SODIMM DDR module sockets
Back-up battery
PCI/PCIe riser card connector
mSATA SATA II
1 x DVI-I 2 x USB 2.0
Add-on I/Fs connector
CFast
7
Intel® processor
2 x USB 3.0 1 x RS232
DB9M
SATA III for 2,5” SSD/HDD
PB3010 - Interfaces & rear connectors
S0
S1
8
PB3010 - Processors
• Intel® Ivy Bridge platform (3rd generation Core i processors)
Ultra low voltage processors – Celeron 1047UE 1,4 GHz, dual core - two threads - 2MB Smart Cache - 17W
– Celeron 1020E 2,2 GHz, dual core - two threads - 2MB Smart Cache - 35W
– Core i3 3120ME 2,4 GHz, dual core - four threads - 3 MB Smart Cache - 35W
– Core i3 3610ME 2,7 GHz, dual core - four threads - 3 MB Smart Cache - 35W
– Core i7 3612QE 2,10 GHz, quad core - four threads - 6 MB Smart Cache - 35W • 22nm process technology • L2 Cache – 2/3/6 MB • Fast memory support - DDR3 1333MHz RAM • Low power consumption - 17W/35W TDP
• HM76 Companion Chip
– Intel® Rapid Storage Technology • With one or multiple hard drives
9
PB3010 - Integrated UPS (option)
10
UPS integrated in the internal power supply unit • With external battery pack - rear of the system mounting • With external battery pack - standalone wall mounting UPS features • 12V DC UPS battery backup system • Input voltage intervention threshold 18V DC • 5' nominal duration time at 25°C, full charge, 10A load (estimated value) • 15W max consumption during battery charge*
External battery pack • 2500mAh 12V/6A max lead battery (Pb) • Full charge in 5 hours • Lifetime 10y at 25°C, full charge
Software Management Tools • Smart battery management to extend lifetime • Battery estimated duration for individual system configuration
15 W
0 1 2 3 4 5Hour
*Consumption [W] during battery charge
PB3010 - Mass Storage
CFast
• 1 x bootable CFast SATA II embedded on board with external access
Internal SSD mSATA
• 1 x mSATA SATA II internal connector for direct insertion of mSATA SSD
Internal 2,5" SSD/HDD
• 1 x SATA III connector for: – SSD 2,5" with installation kit – HDD 2,5" with installation kit (also 24x7)
ASEM recommends SSD memory due to its industrial reliability and high thermal and vibration shock resistance
CFast card
mSATA SSD
11
SSD/HDD 2,5" With installation kit
PB3010 – Board type and combinations
Configurations/ Slot
S0 S1
Add-on 1 board among: • 1 x RS232/422/485 + 1 x USB • 1 x RS232/422/485 opto + 1 x USB • 2 x RS232 • 2 x USB 2.0 • 1 x LAN Gigabit • 1 x 4 ports LAN SWITCH
PCI / PCIe No slot 1 board among: • NETcore X APCI • CAN RAW PCI • Customer PCI/PCIe x4*
* max 3W consumption
12
PB3010 - ASEM add-on Interfaces (optional) 1 x RS232/422/485 (DB15M) + 1 x USB 2.0
1 x RS232/422/485 optoisolated (DB15M) + 1 x USB 2.0
2 x RS232 (DB9M)
2 x USB 2.0 (Type A)
1 x 10/100/1000 Mbps Ethernet (RJ45)
4 ports unmanaged Gigabit Ethernet Switch
13
PB3010 - Fieldbus APCI Boards (optional)
NETcore® X cards enable the system to interface all popular fieldbus • Master or Slave function • Available in APCI format
Supported Fieldbuses
14
