Pressure Control Group-1 Bore Sizes 7-¹/16” to 11”
“From the Crown...... .......to the Ground”
Pressure Control GroupOur supply stores carry a complete range of pressure control components. We inventory complete Hydril pulsation dampeners and RS BOP stacks. In addition we have a full range of replacement parts and accessories. Our staff is here to make sure that you receive the correct components for your application.
Packing UnitsHydril and RSPulsation Dampener Bladder Hydril K-20 5000, K-10 3000Emsco PD-53 & PD-55
Ram Rubbers 11”-3000, 11”-5000, 13”-3000, 13”-5000.H&H and RS
BOP Ram BlocksRS brand
BOP Studs RS brand
Ram Rubbers
Packing Units
Pulsation Dampener Bladder
Pressure Control Components
Spring isolator
Wear Plate
Packing Unit
Head
Open Chamber
Piston
Closing Chamber
Cutaway View of Screwed Head GK BOP withPacking Unit Fully Open
HYDRIL GK®ANNULAR BLOWOUT PREVENTER
Pressure Control Group-1 Bore Sizes 7-¹/16” to 11”
Pressure Control Group Ram Blocks
BORE SIZE (7-⅟ to 11 inches) 7-⅟ †9 9 11
WORKING PRESSURE (psi) 3,000 5,000 10,000 15,000 20,000 3,000 5,000 10,000 3,000 5,000 5,000 10,000
HEAD TYPE SCREWED LATCHED SCREWED
OLD NOMINAL SIZE 6” - 8” - 10” -
SHELL TEST PRESSURE Factory Only 6,000 10,000 15,000 22,500 30,000 6,000 10,000 15,000 6,000 10,000 15,000
OPERATING CHAMBER TEST PRESSURE Factory Only
3,000 5,000 10,000 15,000 20,000 3,000 5,000 10,000 3,000 5,000 10,000
*OPERATING CHAMBERVolume (Gal)for full piston stroke
CLOSINGOPENING
2.85 2.24
3.86 3.30
9.427.08
11.27.50
10.97.20
4.333.41
6.845.80
15.911.95
7.435.54
9.817.98
25.1018.97
FULL PISTON STROKE (inches) 4-⅛ 4-½ 5-½ 5-¾ 6-¾ 6-⅛ 7-⅛ 8
BODY DIAMETER (inches) 26 29-¼ 43-¾ 50 55 28 34 50-½ 33-¾ 37-½ 42-¼ 56-½
CLEARANCE DIAMETER (inches) 32-¼ 35-¾ 49-½ 61 58 34-½ 41 56-¾ 40 44-¼ 61-½
**HEIGHT (inches)
FLANGED BOTTOM
32 36-⁄10M:48-⅛15M:48-¾
54-⅛ 59 37-⁄ 41-¾ 55-¾ 39-¾5M:47-⁄10M:48-⁄
5M:48-¼10M:49
10M63-½15M:65-⁄
STUDDEDBOTTOM
27-¾ 30-¾ AOR 45-⁷⁄ 48-⁄ 32-¾ 34-¾ 48-⅛ 34-⁄5M:39-⁄10M40-¼
5M:40-⁄10M:40-⁄
10M:55
C/W HUB BOTTOM
31-⅛ 34-⁄10M:47-⅛15M:AOR
AOR - 5M:36-⅞ AOR -38-⅛
10M: AOR5M:820010M AOR
45-⁄10M:61-⅛15M:AOR
**weight (Ibs) approximate
FLANGED BOTTOM
2715 4000 12200 14250 23000 3500 6000 18540 55005M:44-⁄
AOR
AOR
10M:2614015M:AOR
STUDDED BOTTOM
2585 3785 AOR 22000 3300 5700 18340 51405M:820010M:AOR
25460
C/W HUB BOTTOM
2505 3850 11900 AOR - 5M:3450 AOR - 53505M:792010M:AOR
10M:2600015M:26100
STANDARD RING GROOVES
FLANGED
RX45
RX46
10M:BX15615M:BX156
BX156
RX49
RX50 BX157
RX53
5M:RX5410M:BX158 5M:RX54
10M:BX158
10M:BX15815M:BX158
STUDDED -5M:RX54
10M:BX15810M:BX158
C/W HUB BX156 - AOR - 5M:RX53 5M:RX5310M:BX15815M:BX158
* 15,0000 psi Shell w/10,0000 psi Packing Unit 1” NPT hydraulic connections are standard, 1-¼” or 1-½” on request Information Only † Older models may have 8-⁄ boreAOR Available On Request †† Older models have 9-¾ piston stroke with 34.53 gallon closing chamber volume and 24.66 opening chamber volume** With standard studded top connection rated to BOP working pressure Ω Reference only replaced by GX
NORTH TEXAS OFFICE CORPORATE OFFICES 14400 Highway 171 2002 Maurice Road Cresson, Texas 76035 Odessa, Texas 79760 WWW.BRIDGESEQUIPMENT.COMPhone: 817.396.4340 432.333.9741Fax: 817.396.4388 432.333.3042
BRIDGES EQUIPMENT LTDBridges Equipment has been providing new and used equipment along with quality service to the oil and gas drilling industry since 1984. We are a company dedicated to supplying quality products, service and support, all at a fair price. Our slogan means what it says. We supply all that the drilling rig requires......
“From the Crown...... ...........to the Ground”
Bridges Equipment product, service offerings and resources include: • Located on over 80 acres, our main facility in Odessa, TX is equipped to provide our customers with all their equipment needs. • New Equipment ranging from complete rigs and drawworks to triplex mud pumps and traveling equipment. We also offer new rotary tables, swivels and BOP’s. • Complete reconditioning facilities with the capability to return most drilling equipment to O.E.M. specifications. • Full service machine shops to guarantee on time, accurate delivery and quality of supply. • Expert unitization of new and reconditioned triplex mud pumps. • Capabilities to fabricate custom skids to meet you needs, however unique the application.Our supply stores specialize in supplying all the equipment the oil and gas drilling equipment industry requires to operate and support their activities. In addition to our Odessa store, we have a facility in Cresson, TX, to serve customers in that region Bridges Equipment maintains a full range of triplex mud pump packages as part of an extensive rental fleet.
Pressure Control Group-2 Bore Sizes 11” to 16 3/4”
“From the Crown...... .......to the Ground”
Ram Rubbers
Packing Units
Pulsation Dampner Bladder
Pressure Control Components
Spring isolator
Wear Plate
Packing Unit
Head
Open Chamber
Piston
Closing Chamber
Cutaway View of Screwed Head GK BOP withPacking Unit Fully Open
HYDRIL GK®ANNULAR BLOWOUT PREVENTER
Pressure Control GroupOur supply stores carry a complete range of pressure control components. We inventory complete Hydril pulsation dampeners and RS BOP stacks. In addition we have a full range of replacement parts and accessories. Our staff is here to make sure that you receive the correct components for your application.
Packing UnitsHydril and RSPulsation Dampner Bladder Hydril K-20 5000, K-10 3000Emsco PD-53 & PD-55
Ram Rubbers 11”-3000, 11”-5000, 13”-3000, 13”-5000.H&H and RS
BOP Ram BlocksRS brand
BOP StudsRS brand
Pressure Control Group-2 Bore Sizes 11” to 16 3/4”
Pressure Control Group Ram Blocks
BORE SIZE (11 to 16-¾ Inches) 11 Ω 13-⁵⁄ HL 13-⁵⁄ 13-⁵⁄ Ω 16-¾ 16-¾
WORKING PRESSURE (psi) 3,000 *10/15,000 3,000 5,000 10,000 2,000 3,000 5,000
HEAD TYPE LATCHED SCREWED LATCHED SCREWED LATCHED SCREWED LATCHED SCREWED LATCHED
OLD NOMINAL SIZE - 12 - 16 -
SHELL TEST PRESSURE Factory Only 15,000 22,600 6,000 10,000 7,500 15,000 3,000 45,000 10,000
OPERATING CHAMBER TEST PRESSURE Factory Only
10,000 3,000 5,000 3,000 10,000 3,000 5,000
*OPERATING CHAMBER
CLOSINGOPENING
25.1018.97
26.6720.45
11.368.94
17.9814.16
17.98††26.50
††37.18††26.50
††37.1812.59
17.4615.80
21.0215.80
28.7019.93
Volume (Gal)
(For Full Piston Stroke)
FULL PISTON STROKE (inches) 8 8-½ 7-⅛ 8-½ ††10-½ 8-½ 9 10-½
BODY DIAMETER (inches) 58 64-¾ 40-½ 45-¼ 45-½ 47-¾ 44 61 63-½ 46-¼ 48-½ 53-½ 54-½
CLEARANCE DIAMETER (inches) 60-¾ 69-¾ 47-½ 52-¼ 48-½ 68-⅛ 53-¼ 55-½ 59-½
**HEIGHT (inches)
FLANGED BOTTOM
10M:63-⅜15M:AOR
72-⁄ 45-¼5M:54-⅛
10M56-⁄5M:54-½
10M:59-⁄-
71-⅜ 71-⁄ 49-½ 57-⅞ 61-¼ 61-⁄
STUDDED BOTTOM
10M:54-⅞15M
60-⅞ 39-⅜5M:46-½
10M:46-½5M:AOR
10M:AOR60-⅝ 61-⅛ 43-¾ 47-¼ 53 53-⁄
C/W HUB BOTTOM
10M:6115M:60-¼
67-⅞ 435M:51-½
10M:51-½5M:51-⅞
10M:51-⅞46 66-⅞ 66-⁄ 46-½ - 59-⅞ 59-⁄
**weight (lbs) approximate
FLANGED BOTTOM
AOR 8784
AOR
5M:1380010M:14500
5M:1325010M:13900
-
33,525
AOR
11,417 14,868 20,835 21,230
STUDDED BOTTOM
AOR 35,350 85225M:13100
10M:AOR 32,850 11,100 14,470 20,000 20,400
C/W HUB BOTTOM
AOR 8650 AOR 9400 32,785 33,377 11,317 - 20,545 20,950
STANDARD RING GROOVE
FLANGED 10M:BX15815M:BX158
BX158 RX575M:BX160
10M:BX159
-
BX159 RX65
RX66
BX162
BX162
STUDDED 10M:BX158 -
C/W HUB10M:BX15815M:BX158
BX160 - BX162
* 15,000 psi Shell w/10,000 psi Packing Unit 1” NPT hydraulic connections are standard, 1-¼” or 1-½” on request Information Only † Older models may have 8-⁄ boreAOR Available On Request †† Older models have 9-¾ piston stroke with 34.53 gallon closing chamber volume and 24.66 opening chamber volume** With standard studded top connection rated to BOP working pressure Ω Reference only replaced by GX
NORTH TEXAS OFFICE CORPORATE OFFICES 14400 Highway 171 2002 Maurice Road Cresson, Texas 76035 Odessa, Texas 79760 WWW.BRIDGESEQUIPMENT.COMPhone: 817.396.4340 432.333.9741Fax: 817.396.4388 432.333.3042
BRIDGES EQUIPMENT LTDBridges Equipment has been providing new and used equipment along with quality service to the oil and gas drilling industry since 1984. We are a company dedicated to supplying quality products, service and support, all at a fair price. Our slogan means what it says. We supply all that the drilling rig requires......
“From the Crown...... ...........to the Ground”
Bridges Equipment product, service offerings and resources include: • Located on over 80 acres, our main facility in Odessa, TX is equipped to provide our customers with all their equipment needs. • New Equipment ranging from complete rigs and drawworks to triplex mud pumps and traveling equipment. We also offer new rotary tables, swivels and BOP’s. • Complete reconditioning facilities with the capability to return most drilling equipment to O.E.M. specifications. • Full service machine shops to guarantee on time, accurate delivery and quality of supply. • Expert unitization of new and reconditioned triplex mud pumps. • Capabilities to fabricate custom skids to meet you needs, however unique the application.Our supply stores specialize in supplying all the equipment the oil and gas drilling equipment industry requires to operate and support their activities. In addition to our Odessa store, we have a facility in Cresson, TX, to serve customers in that region. Bridges Equipment maintains a full range of triplex mud pump packages as part of an extensive rental fleet.