Westwood1-800-442-1630
Please order by No.PWT1 rev. 5-1-04
���� � ���� � � �For testing RIELLO pumps see page T2
No. T10PW
OIL BURNER PUMP PRESSURE & VACUUM TESTERS
T10T10-3T10-4T10-5S100-280T15T15-1T15-2S100-290
No.PW Description
Complete oil burner pump tester w/case, quick-connect fittings and instructionsReplacement adaptor fittings for T10 tester, 3/16" X 1/4" flare, Pkg. of 2Replacement rubber quick-connect seats (gaskets) for T10 tester, Pkg. of 12Replacement hose set (2 color coded hoses) for T10 testerReplacement Liquid Filled 0-300 PSI Pressure Gauge for T10 testerComplete suction line analyzer w/case, adaptor fittings and instructionsReplacement adaptor fittings for T15 tester, 1/2" suction line, Pkg. of 2Replacement clear tubing w/clamps for T15 testerReplacement Liquid Filled 0-30" Hg. Vacuum Gauge for T15 tester
Precisely sets pump pressure and checks cut-off with accuracy not possible using non-liquid filledgauges. Gauge liquid dampens pulsation allowing precise measurement and protects gauge fromhydraulic shock damage. Choose between pressure measurement and cut-off test with just theturn of the knob - no disconnecting! "Service Truck Tough" carrying case with complete instructions.
Quick-connect fittings require only finger tighteningBrass construction with color coded hosesFits popular 3/16" and 1/4" nozzle line fittingsStainless steel liquid filled gauge, range 0 - 300 PSIEasy-to-follow instructions - rugged carrying case
Westwood
"PRESSURE-VIEW" OIL BURNER PUMP TESTER
No. T15PW
Analyze suction line problems (ie. air leaks, restrictions, dirt, etc.) using this clear tubing service tool.Vacuum gauge liquid dampens pulsation allowing precise measurement and protects gauge fromhydraulic shock damage. Actually see what's happening inside that problem suction line! Completeinstructions and "Service Truck Tough" carrying case.
Westwood
"VACUUM-VIEW" SUCTION LINE ANALYZER
Thick clear tubing does not collapse from vacuumAll brass with stainless steel tubing clampsFits popular 3/8" and 1/2" suction line fittingsStainless steel liquid filled gauge, range 0 - 30" HgEasy-to-follow instructions - rugged carrying case
Westwood1-800-442-1630
Please order by No.PW T2rev. 5-1-05
���� � ���� � � �For testing SUNTEC & WEBSTER pumps see page T1
The first tester specifically designed for the Riello pump!Quick-Connect European thread adaptors mount easilyon the pump with just finger tightening. The 24" colorcoded flexible lines allow the tester to be placed in anyconvenient location for remote reading of the pumppressure and vacuum.
Quick-connect European threadfittings require only finger tightening
Liquid Filled gauges dampenpulsation - no hydraulic shock
"Service Truck Tough" case
PUMP TESTERSRIELLO
*Can also be used on older pumps that havethe vacuum port on the side of the pump.
VacuumPort
Pressure Port
P
V
BURNERS
Black (vacuum)
Red (pressure)
24" FlexibleTubing
BLEEDPRESSUREVACUUM RIELLO
WESTWOOD
WP
15
0
25
20 10
5
30
In-Hg
WESTWOOD
WP
150
0
50
100 200
250
300
psi
Liquid FilledVacuumGauge
Bleed OilOutlet Tube
Liquid FilledPressureGauge
BleederKnob
Quick-ConnectPressure Adaptor
Quick-ConnectVacuum Adaptor*
PW
No.T20 PW
No.T22Tests Vacuum & Pressure Tests Pressure
BLEEDPRESSUREVACUUM RIELLO
WESTWOOD
WP
15
0
25
20 10
5
30
In-Hg
WESTWOOD
WP
150
0
50
100 200
250
300
psi
BLEEDPRESSURE
RIELLO
WESTWOOD
WP
150
0
50
100 200
250
300
psi
New!
(RIELLO No. C7050010)
T20T20-10T20-12T20-14T20-16T20-18T22T22-10T22-18S100-285S100-295
No.PW DescriptionRIELLO No.
Complete RIELLO tester with case, liquid filled gauges, Quick-Connect adaptor fittingsReplacement hose set (1 ea. Red and Black) for T20 testerReplacement "O" ring for T20 and T22 tester Quick-Connect adaptors, Pkg. of 6Replacement Nylon washer for T20 and T22 tester Quick-Connect adaptors, Pkg. of 6Replacement "Drip Cap" for T20 and T22 tester Quick-Connect adaptors, Pkg. of 6Replacement carrying case for T20 testerRIELLO pressure tester with case, liquid filled gauge, Quick-Connect adaptor fittingReplacement hose (Red) for T22 testerReplacement carrying case for T22 testerReplacement Liquid Filled 0-300 PSI pressure gauge (2-1/2" face) for T20 and T22Replacement Liquid Filled 0-30" Hg. vacuum gauge (2-1/2" face) for T20
C7050010----------
Westwood1-800-442-1630
Please order by No.PWT3 rev. 5-1-04
No.T25-7PW
No.T25-5PW
No.T25-3PW
No.T28PW
No.
T25-12P
W
No.T25-1PW
Westwood
"VAC-PROBE" OIL LINE ACCESS PORT
*Vac-Probe w/48" flexible hose connected to a heavy weight 3/8" NPT hand pump connection adaptor.Adaptor easily connects to a hand pump, or serves as a hose end weight when drawing oil from a can.
System Priming
(Hand Pump)
Temporary Oil Line
Vacuum
21 3
Test
HANDLE SLIDES SIDE-TO-SIDEwithout LEAKING!
12" CLEAR TUBING
Quickly and neatly access fuel system without disconnecting fittings!Liquid filled gauge dampens pulsation allowing precise measurement andprotects gauge from hydraulic shock damage
Models available for all popular heating oil line filters
Allows access to oil lines without opening or disconnecting fittings.Installed in place of the center bolt on the line filter it allows not onlyvacuum tests to be made quickly and neatly, but also affords easyaccess to the fuel system for pump priming and connection of atemporary oil line (run outs). One piece solid steel construction.
T25T25-1T25-2T25-3T25-4T25-5T25-6T25-7T25-8
No.PW Description
Vac-Probe Kit; (1) Vacuum gauge, (4) Vac-Probes-1 ea.Vac-Probe w/gauge for small General 1A style filterVac-Probe No. T25-1, less gaugeVac-Probe w/gauge for large General 2A style filterVac-Probe No. T25-3, less gaugeVac-Probe w/gauge for Fulflo FB4, FB6, FB8, FB10Vac-Probe No. T25-5, less gaugeVac-Probe w/gauge for Firomatic C-40, C-50Vac-Probe No. T25-7, less gauge
Vac-Probe Run Out Adaptor*
T25-12T25-14T25-16T25-18
No.PW
For small General 1A style filterFor large General 2A style filterFor Fulflo FB4, FB6, FB8, FB10 filtersFor Firomatic C-40, C-50 filters
Description
T28T28-2
No.PW
Bleed Wrench with 12" hoseReplacement hose, Pkg. of 6
Westwood "FLO-THRU" BLEED WRENCHSlidingHan
dle
Quickly and neatly bleed oil burner pumpsHandle slides side-to-side for easy bleeding
STAINLESS STEEL LIQUID FILLED GAUGES
Westwood1-800-442-1630
Please order by No.PW T4rev. 5-1-06
Westwood
"EASY ANGLE" PRESSURE & VACUUM HAND PUMPS
Unique "EASY ANGLE" 120° valve angle makes connections easyTwo Sizes - Standard and High CapacityHigh Capacity model gives 50% more volume per stroke!Exclusive center port for installation of a compound gauge allowsmonitoring of the system pressure and vacuum during operationComfortable "T" handle and protective vinyl sleeve on barrelQuick-connect hose set attaches to hand pump using no tools!(Same, no tools needed connection to all popular hand pumps)
Hand operated piston pumps with built-in check valves for use withliquids and air. Ideal for clearing plugged oil lines, priming pumps,transferring liquids, and adding chemicals to boilers.
T30T30-1T30-4T30-6T30-8S100-402S230
No.PW
Description
Standard hand pump w/1/8"- NPT center access portHigh capacity hand pump w/1/8"- NPT center access portQuick-connect, no tools needed fittings and hoses setPlastic carrying case for T30 hand pump, fittings and hoses"O" ring for T30, -1 and all 1-1/4" barrel pumps, Pkg. of 2Compound pressure-vacuum gauge for center access portReplacement check valve, 3/8" NPT, genuine Firomatic®
No.T30-4PW
QUICK-CONNECT FITTINGS(NO TOOLS NEEDED)
ANY HAND PUMPCHECK VALVE
QUICK-CONNECT FITTINGS & HOSE SET
No.T30-6PW
CARRYING CASE FOR T30 & T30-4
No.S100-402PW
CENTER PORT COMPOUND GAUGE30" Hg. - 150 PSI (2" FACE, 1/8"- NPT)
No.T30PW
STANDARD
No.T30-1PW
HIGH CAPACITY
Now with Genuine
CHECK VALVES!
Westwood1-800-442-1630
Please order by No.PWT5 rev. 5-1-06
FOR QUICKLY CLEARING PLUGGED LINESALL BRASS CONSTRUCTION
Westwood
CO2 BLOW OUT GUNS & KITS
T32
T32-10
T32-11
T32-15
T32-16
T32-20
T32-25
ML-3
ML-3-150
ML-3-150-UPG
ML-3-P1000
ML-3-PQ
QCK-1 Kit
"O" rings
CO2 blow out gun for clearing clogged oil lines and instrumenttransmission lines. Built-in check valve allows spent cartridgeto be removed without loss of pressure.
CO2 blow out gun with built-in safety valve. Limits pressureat outlet of gun to 150 PSI. Since CO2 cartridges produceapproximately 800 PSI, the additional pressure is relievedshould a severely restricted line be encountered.
150 PSI safety valve upgrade kit for blow out gun(Relief valve and angle adapter, 1/8"-NPT)
CO2 blow out gun with 1,000 PSI pressure gauge.Accurately monitors pressure in the line during clearing.Constant pressure indicates line is blocked; fallingpressure means blockage is moving; no pressure meansline is clear. Complete kit includes blow out gun withgauge, box of CO2 cartridges, plastic carrying case,and instructions
CO2 blow out gun with Quick-Connect Kit for quicklyconnecting to different line sizes. Kit includes blowout gun with 1,000 PSI pressure gauge, quick-connectcoupling, (1) ea. 3/8" & 1/2" compression connectors,(1) ea. 3/8" & 1/2" flare connectors, plastic carryingcase, and instructions
Quick-Connect Fittings Kit (blow out gun not included).Contains quick-connect coupling, (1) ea. 3/8" & 1/2"compression connectors, (1) ea. 3/8" & 1/2" flareconnectors
Replacement "O" ring for blow out gun, package of 6
No.PW Reference No. Description & Representative Picture
���� � ���� � � �CO2 CARTRIDGES on page T6
Westwood1-800-442-1630
Please order by No.PW T6rev. 5-1-05
* 40 boxes of 10 cartridges per case
No.T34-10PW
No.T34-15PW
Westwood
CO2 CARTRIDGES
T34-10T34-15T34-25T34-30T34-35T34-40
No.PW
MR-1X2MR-2X3MR-4MK-3 KitML-2612" Lighter
1-1/4" x 2-1/8" telescoping rectangular flame mirror2" x 3-3/4" telescoping rectangular flame mirror4-1/4" diameter telescoping round flame mirror26" telescoping tool with clip, magnet, and 2" mirror26" telescoping pilot lighter12" pilot lighter, plated handle, non-telescoping
Reference No. Description
Westwood
FLAME MIRRORS & PILOT LIGHTERS
Telescoping Handle
No.T34-25PW
No.T34-30PW
No.T34-35PW
No.T34-40PW
T32-30
No.PW
CO2 Cartridges CO2 cartridges, 8 gram,800 PSI, Box of 10*
Reference No. Description
Westwood1-800-442-1630
Please order by No.PWT7 rev. 5-1-05
No.T35PW
No.T36PW
T35 TEST KIT CONTAINS:
CO2 IndicatorCO2 Indicator sampling assemblyStack thermometer - 900° FDraft gauge & sampling hose assemblySmoke tester with smoke test paperand smoke scale
Efficiency calculating slide ruleSteel carrying case
Westwood is proud to introduce the BRIGON line of quality combustion test equipment.One of the world's oldest and most respected manufacturers of test equipment for theheating industry, BRIGON offers advanced European technology at an affordable price.And while the BRIGON name may be unfamiliar in North America, the products will beimmediately recognized as interchangeable with test equipment widely used here today.
T35T35-1T36T36-10T36-12T36-14T36-15T36-16T36-18T36-20
No.PW Description Replaces
Bacharach
BRIGON Oil burner combustion test kit with carrying caseT35 kit with smoke tester & stack thermometer manufactured by WestwoodBRIGON CO2 indicator kit with carrying caseReplacement sampling assembly for BRIGON and Bacharach CO2 indicatorReplacement bulb only for BRIGON and Bacharach sampling assemblyReplacement red (in) check valve for BRIGON and Bacharach sampling assemblyReplacement green (out) check valve for BRIGON and Bacharach sampling assemblyReplacement rubber hose for BRIGON and Bacharach sampling assemblyReplacement filter tube w/yarn for BRIGON and Bacharach sampling assemblyBRIGON Efficiency calculating charts
10-502210-502210-500011-702911-012011-013811-012711-011911-0130
-
Westwood
BRIGON
OIL BURNERCOMBUSTION TEST KIT
T36 TEST KIT CONTAINS:
CO2 IndicatorCO2 Indicator sampling assemblyEfficiency calculating slide ruleCarrying case
Westwood
BRIGON
OIL BURNERCO2 INDICATOR KIT
Westwood1-800-442-1630
Please order by No.PW T8rev. 5-1-04
No. T40PW
Westwood
SMOKE TESTER - POLYCARBONATE BARREL
Reliable and durable instrument for measuring the smoke number of a flue gas sample. Flue gasis taken from an opening in the flue pipe and drawn through the smoke test paper mounted in thetester. Comparison of the test paper with the smoke scale determines the smoke scale number.
T40T40-1T41T41-1T41-2T41-5
No.PW Description Replaces
Bacharach
Westwood polycarbonate barrel smoke tester kit with carrying caseWestwood Universal precut smoke test paper and smoke scale, Pkg. of 50 stripsBRIGON smoke testerBRIGON smoke test paper, Pkg. of 40 papersBRIGON smoke scaleBRIGON smoke tester lubricant
21-700621-001921-700621-001921-0018
-
INCLUDES : SMOKE TESTER, SMOKE TEST PAPER, SMOKE SCALE, CARRYING CASE
Virtually unbreakable Polycarbonate barrelHardware all Brass and Stainless SteelSampling tube hooks into smokepipeFits into BRIGON and Bacharach casesLifetime silicone lubrication
Corrosion proof constructionFits into BRIGON and Bacharach cases
POLYCARBONATEno dents, no corrosion!
No. T40-1PW
No. T41PW
Westwood
UNIVERSAL SMOKE TEST PAPER
Precut strips for use in all smoke testersIncludes smoke scaleSturdy dust & dirt proof plastic package
BRIGON SMOKE TESTER
Pkg. of 50 strips
SMOKE
TEST PA
PER
Westwood1-800-442-1630
Please order by No.PWT9 rev. 8-10-04
Westwood
CO2 INDICATORSERVICE PARTS & FLUID
This precision instrument measures draft with accuracynot attainable with pocket draft or styrofoam ball andtube type gauges. Its high strength case stands up todaily use and will not damage the way Bakelite cases do.
T42T43T45T45-1T50-2
T50-3
T50-4T50-5
No.PW Description Replaces
Bacharach
Westwood stainless steel stack thermometerBRIGON stack thermometerBRIGON precision draft gaugeReplacement hose & probe for BRIGON draft gaugeWestwood CO2 Indicator Repair Kit, (1) Bottle CO2 Fluid, Valve Plunger Seal,Top Gasket, Diaphragm, Screws, Filtering Material, Nitrile Gloves, for Bacharach
Westwood CO2 Indicator Recharging Kit, (2) Bottles CO2 Fluid, Top Gasket,Screws, Filtering Material, Nitrile Gloves, for Bacharach
Westwood CO2 Indicator Fluid, (1) Bottle, for Bacharach and BRIGONWestwood Repair Kit for BRIGON CO2 Indicator, (1) Bottle CO2 Fluid, ValvePlunger Seal, Top Gasket, Diaphragm, Screws, Filtering Material, Nitrile Gloves
12-701412-701413-701913-004711-7052
11-7047
--
FOR
BACHARACH & BRIGONTESTERS
Precision instrument for accurate readingsTough, lightweight constructionHigh visibility scale, -.25" to +.05" WCRequires no leveling for accurate readings9' flexible hose with 5" draft probe
No. T45PW
No. T50-2, -5PW
No. T50-3PW
No. T50-4PW
BRIGON DRAFT GAUGE
Westwood
STAINLESS STACK THERMOMETERBRIGON STACK THERMOMETER
No. T42PW
� Stainless steel construction� 3" Face - 6" Insertion Probe� Includes stack mounting clip� Fits BRIGON and Bacharach
cases� Range: 200° - 1000° F
No. T43PW
� Stainless steel construction� Fits BRIGON and Bacharach
cases� Range: 0° - 900° F
Westwood1-800-442-1630
Please order by No.PW T10rev. 5-1-04
No. T60PW
T60T70T80
No.PW Description
Standard 10,000 volt oil burner ignition transformer testerCad cell primary control and flame detector eye tester"AMP-MASTER" thermostat heat anticipator meter
Test standard 10,000 volt oil burner ignition transformers quicklyand safely with this rugged, easy-to-use tester. All testing is donefrom the primary side of the transformer avoiding contact with thehigh voltage terminals. Tests transformer right on the burner.
Safely tests from the transformer's primary sideTransformer remains on the burner for testingDetects early stages of transformer breakdownEasy access built-in fuse protects meterSimple, easy-to-read meterPlugs into 120 volt outlet (ie. trouble light)"Service Truck Tough" with high impact case
Westwood
OIL BURNER IGNITION TRANSFORMER TESTER
No. T70PW
Test both cad cell primary control and flame detector eyesimultaneously without removing components from the burner.Built-in flame simulators for all popular controls insure accuratediagnosis and testing.
Westwood
CAD CELL RELAY & EYE TESTER
Tests primary control and eye right on the burnerSimple, easy-to-read and understand ohmmeterBuilt-in flame simulators for all popular controls"Service Truck Tough" with high impact case
No. T80PW
Precisely measures the thermostat control circuit current to allowcorrect setting of the heat anticipator. Avoids repeat service callsto remedy short cycling or override problems. Connects at eitherthe thermostat or relay.
Westwood
"AMP-MASTER" THERMOSTAT CIRCUIT METER
Accurately measures thermostat control circuitdraw to correctly adjust heat anticipator settingMeter dial matches T87F heat anticipator scale"Service Truck Tough" with high impact case
Westwood1-800-442-1630
Please order by No.PWT11 rev. 5-01-06
0 - 100 PSI PRESSURE GAUGE � ALL BRASS CONSTRUCTION
No. T90PW
T90T91T92
No.PW Description
"EASY ACCESS" tankless coil and piping pressure testerGas pressure tester for natural and L.P. gas"PILOT PUFFER" gas pilot and orifice lint and dust blower
No. T92PW
Westwood
"PILOT PUFFER" LINT & DUST BLOWER
Cleans hard-to-reach gas pilot burners and orificesDurable, rust proof 11" brass air tubeFlexible, long life flexible rubber bulb
No. T91PW
For setting pressure of natural and L. P. gas applicanceswithout the troublesome inconvenience and mess of waterfilled manometers. Gauge is precision diaphragm type witha 2-1/2" color coded "EZ Read" dial.
Westwood
GAS PRESSURE TESTER
Precision 0-15" WC "EZ Read" gauge with colorcoded dial for natural and L. P. gas36" flexible hose with 1/8"- NPT brass adaptor"Service Truck Tough" with high impact case
PW
The ideal tester for checking tankless coils for leaks, and pressure testing new piping of all typesprior to building code inspections. Easily connects to any convenient garden hose thread (ie.boiler drain valve, wash tub faucet, etc.) without disturbing any fittings in the system. Built-inSchrader valve allows system pressurization with just a simple bicycle pump. Comes in a rugged,"Service Truck Tough" high impact case.
Westwood
"EASY ACCESS" PRESSURE TESTER FOR LEAK TESTING TANKLESS COILSAND PRESSURE TESTING NEW PIPING
BOILER
BOILERDRAIN
SCHRADER VALVE
HIGH PRESSURE HOSE
CONNECTS EASILY
0 - 100 PSI PRESSURE GAUGE
PW
Westwood1-800-442-1630
Please order by No.PW T12rev. 5-1-06
SMOKE, VOLTAGE TESTERS, CORD & CLIP SET, JUMPERS, POCKET THERMOMETERS
T95-20T95-22T95-24T95-26T95-28T100-10T100-15T100-50T100-70T100-72T100-74T100-80T100-82T100-84T100-120T100-125T100-130
-----
LV TesterSD Tester7328JW-12JW-18JW-36IJW-12IJW-18IJW-36HDT 303KT-160T-220
No.PW DescriptionReference No.
Smoke emitter sticks, 20 seconds of smoke per stick, package of 20 sticksSmoke emitter pen with 6 wicks, 30 seconds of smoke per test, 60 tests per wickSmoke emitter pen refill wicks, package of 6 wicksSmoke emitter cartridges, 65 seconds of smoke, package of 10 cartridgesSmoke emitter cartridges, 3 minutes of smoke, package of 5 cartridgesPocket low voltage tester, 5 - 50 VAC/VDCPocket screwdriver line voltage tester, bright red light, 70 - 250 VAC110 VAC/20A cord & clip set, 8' long cold weather flexible wire, w/ground wire clip18 gage stranded wire jumper, non-insulated clips, 12" long18 gage stranded wire jumper, non-insulated clips, 18" long18 gage stranded wire jumper, non-insulated clips, 36" long18 gage stranded wire jumper, insulated clips, 12" long18 gage stranded wire jumper, insulated clips, 18" long18 gage stranded wire jumper, insulated clips, 36" longPocket digital thermometer, range: -58° to +302° FPocket dial thermometer, range: -40° to +160° FPocket dial thermometer, range: 0° to +220° F
No. T100-10PW
LOW VOLTAGE TESTER
No. T95 (Series)PW
SMOKE PRODUCTS
No. T100-125, -130PW
POCKET DIAL THERMOMETER
CORD & CLIP SET - 8' Long
No. T100-50PW
No. T100-70 through -84PW
JUMPERS - Insulated & non-insulated
Clips are heavy duty,insulated with colorcoded boots, andrated at 20 amps!
No. T100-15PW
LINE VOLTAGE TESTER
No. T100-120PW
POCKET DIGITAL THERMOMETER
For HVAC leakageand flow testing
Westwood1-800-442-1630
Please order by No.PWT13 rev. 5-1-05
Westwood
NNASgaugeTM NOZZLE ASSEMBLY SETTING GAUGESNO GUESSWORK � NO BLIND ADJUSTMENTS � NO BURNER REMOVAL
Gauges are made of high impact polystyrene for long service lifeThe B-1 & W-1 gauges are also used to set the electrode tipsAvailable individually or in a complete kit containing all three gauges
T100-200T100-202T100-204T100-206T100-220T100-230
NAS-ABWNAS-B1NAS-A1NAS-W1Ignitor GageTB-60
No.PW DescriptionReference No.
NASgaugeTM nozzle assembly setting gauge kit, (3) gauges, instructionsNASgaugeTM nozzle assembly setting gauge for Beckett burnersNASgaugeTM nozzle assembly setting gauge for Aero burnersNASgaugeTM nozzle assembly setting gauge for Wayne burnersElectrode tip setting gaugeElectrode tip benders, 5" long case hardened steel, set of 2 benders
Proper NOZZLE - COMBUSTION HEAD relationship without removing the burner!
EASY TO USE:1. Slide NASgaugeTM over the nozzle.2. Insert nozzle assembly until it
touches the combustion head.3. Mark the position of the slide
plate and remove NASgaugeTM
1
3
2
No.T100-230PW
No.T100-220PW
Westwood
ELECTRODE GAUGE
Accurately sets electrode gap andplacement from the nozzle basedon nozzle spray angle.
Westwood
ELECTRODE BENDERS
Pair of 5" long case hardened toolsdesigned specifically for bendingand adjusting electrode tips.
No.T100-202PW
B-1 For BeckettModels AF, AFG, SR,SF with "F" heads andSF II with "FBX" head
No.T100-204PW
A-1 For AeroModels HF-US, SV,SSV, F-AFC, HF-AFC
No.T100-206PW
W-1 For WayneModels EG-1, M-SR,EH-SR, EHA-SR
No.T100-200PW (Kit containing all 3 gauges)
Westwood1-800-442-1630
Please order by No.PW T14rev. 5-1-04
���� � ���� � � �COUPLING CUTTER on page T15
Westwood
Coupler PopperTM with Coupler Aligner / Installer
Coupler PopperTM
This handy tool removes coupling ends stuck on the motor shaft from the pump sideof the burner. No need to remove the motor! It also measures the proper dimensionto cut a new coupling for a perfect fit, installs couplings through the pump side of theburner, and centers the pump end of the coupling for perfect alignment with the pumpshaft. A real time saver that no service tech should be without.
T100-300 CP-1
No.PW DescriptionRef. No.
Coupler PopperTM multi purpose coupling tool with Coupler Aligner/Installer
A
Scale
Removing stuck coupling end piece onmotor shaft from pump side of burner
Measuring for proper coupling length(dimension "A" minus 13 marks on theCoupler PopperTM scale)
Using Aligner/Installer to install couplingon motor shaft from pump side of burner
Using Aligner/Installer to center couplingend for perfect alignment with pump shaft
Coupler Aligner / Installer
5/16" (mini pump size)
7/16" (J, H, R pump size)
Measuring scale
Gripping barbs
Westwood1-800-442-1630
Please order by No.PWT15 rev. 5-1-04
���� � ���� � � �T100-370 PORCELAIN CUTTER also cuts gauge glass, see page T16
No.T100-310PW
No.T100-330PW
No.T100-340PW
No.T100-350PW
FIELD PROVEN � RUGGED CONSTRUCTION � QUALITY MATERIALS
T100-310T100-312T100-330T100-332T100-340T100-342T100-350T100-352
#35#35 BladeWP-1-
#996#996-WRD-95RD-95-W
No.PW DescriptionRef. No.
Coupling cutter, heavy duty die cast metal handles, reversible bladeReplacement blade for T100-310Gauge glass cutter for standard, Red Line, and High Pressure glassReplacement cutting wheel for T100-330Gauge glass cutter with adjustable stop for standard glassReplacement cutting wheel for T100-340Gauge glass cutter for standard glass, adjustable stop, cast metal handlesReplacement cutting wheel for T100-350
Westwood
COUPLING & GAUGE GLASS CUTTERSUse the right tool for the job!
COUPLING CUTTER
GAUGE GLASS CUTTERSNote: Always wear gloves and eye protection when working with glass
Cuts coupling shafts quickly and cleanly.No twisting or turning necessary. Cuts1/8" to 1-1/4" O.D. rubber, polyethylene,neoprene, vinyl, PVC, etc. Reversibleblade gives twice the blade life. Curvedhandles are easy on the hands.
The only one recommended for cuttingRed Line and High Pressure gauge glass.Cuts easily leaving a clean, straight edge.Just score and snap!
For cutting standard gauge glass. Cutspieces as short as 1/2" or less. Set thestop to the desired length, squeeze the"trigger" and rotate the glass until itsnaps cleanly in two.
For cutting standard gauge glass. Setthe stop to the desired length, squeezethe handles and rotate the glass until itsnaps cleanly in two.
Westwood1-800-442-1630
Please order by No.PW T16rev. 5-1-04
No.T100-370PW
FIELD PROVEN � HEAVY DUTY CONSTRUCTION � HARDENED CUTTING WHEELS
T100-370T100-372T200-10
#997-
#695
No.PW DescriptionRef. No.
Porcelain & gauge glass cutter, heavy duty chain, hardened wheels & jawsReplacement cutting chain for T100-370Master Lineman's Pliers & Terminal Crimper, drop forged steel, 8-1/2" long
NEW DESIGN! Easier to use!
Westwood
PORCELAIN CUTTERUse the right tool for the job!
Replaces the old tool with externalchain - no more wrapping the chainaround! Powerful compound leveraction snaps even the toughestoil burner porcelain. Hardened andtempered cutting wheels, sure-gripmolded handles, hardened steeljaws, locking clasp, adjustable stop.
Also cuts standard gauge glass up to 3/4" in diameter!Note: Do not cut Red Line or High Pressure gauge glass with this tool. The stress exerted on the glass could lower
the maximum pressure rating of the glass. Use instead the T100-330 gauge glass cutter shown on page T15.
No.T200-10PW
Westwood
MASTER LINEMAN'S PLIERS & CRIMPER
The Grandson of the famous RajahTMCrimping Tool!
DROP FORGED STEELINSULATED HANDLES
CUTSCRIMPS
Genuine RajahTM
STAR CRIMP
BEFORE AFTER
STRIPS
A service tech's dream come true! All the features of lineman's pliers, plus the abilityto cut, strip, and crimp ignition cable and terminals. Hand fitted and finished to makethis professional quality tool a joy to use and a pleasure to look at.
Westwood1-800-442-1630
Please order by No.PWT17
Westwood1-800-442-1630
Please order by No.PW
rev. 5-1-04
T200-15T200-50T200-52T200-54T200-56T200-58T200-80
#271LK-66SK-59XK104RK-97HK-17FT-1
No.PW DescriptionRef. No.
Cutting - Crimping - Stripping tool, for standard wire terminalsLong hex key set in pouch, 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4"Short hex key set in pouch, 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4"6" long hex key set in pouch, 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4"Hex key set in case, .050, 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32"Folding hex key set, .050, 1/16", 5/64", 3/32", 1/8", 5/32", 3/16"Circulator flange installation tool, square drive
No.T200-15PW
No.T200-50PW
No.T200-52PW
Westwood
CRIMPING TOOL
Westwood
HEX KEY WRENCH SETS
Westwood
CIRCULATOR FLANGE TOOL
Cuts and strips #10 to #22 gage wire. Crimps standard insulated, non-insulated,and 7mm automotive type terminals. (for RajahTM ignition terminals, see T200-10Lineman's pliers and crimper on page T16)
HEAT TREATED!
No.T200-54PW
No.T200-56PW
No.T200-58PW
No.T200-80PW
For installing popular B&G andTaco circulator flanges on pipe.Use with a socket or wrench.