Petr Růna [email protected] 9-2014
EQUIPMENT
mailto:[email protected]:[email protected]:[email protected]
GPON
Equipment
Service Access Node MA4000-PX
• Backplane performance 3.2 T • Number of GPON modules (PLC8): 16 • Up-link connection:
- up to 8 ports 10G SFP+, - up to 4 ports 10/100/1000 Base-T/Base-X
• Support up to 8192 ONT • Redundancy of control modules (PP4X ) • Redundancy of power supply inputs • 19“, 9U
Multiservice access and aggregation node MA4000˗PX is designed for building a access network based on GPON technology
PLC8
PP4X PP4X - Central switch module
GPON central office equipment
Switch layer L2+ (up to 480 Gbps) 4x 10GBase‐X (SFP+) /1000Base‐X (SFP) 2x 10/100/1000Base‐T/1000Base‐X (SFP) Inter-module connections: 16x 10 Gbps XAUI (10GBASE‐KX4) with linear modules 2x 10 Gbps XAUI (10GBASE‐KX4) between central switch
8 ports GPON (2.5 Gbps) 2x 10 Gbps XAUI (10GBASE‐KX4) management port 10/100/1000Base‐T support RSSI function switch performance 128 Gbps
PLC8 - Central switch module
GPON sample with 8192 Subscribers
GPON central office equipment
8 GPON ports 4 Combo-ports (10/100/1000Base- T/1000Base-X) 4 ports10/100/1000Base-T 2 ports 10GE(SFP+) Support up to 512 ONT
Service Access Node / aggregation LTP-8X
ONT NTP-2, NTP-2C
• 1 port GPON • 2 ports Ethernet 10/100/1000 Base-T • Internal Triplexer (for CATV services) • Distance to OLT 20 km
VLAN in accordance with IEEE802.1Q; Multicast filtering IGMP snooping; High-performance buffer with QoS support; Prioritizing different types of traffic at the GPON ports according to 802.1p; Authentication algorithm IEEE802.1h at GPON ports; Supports security features;
Bandwidth limitation at ports; AES encryption; FEC coding; Control over TR-069 protocol; full control by OMCI protocol through OLT; FW upgrade remotely from OLT; RF output for CATV transmission
ONT NTP-2 rev.B, NTP-2
ONT NTP-RG-1402G, NTP-RG-1402GC,
NTP-RG-1402G-W, NTP-RG-1402GC-W
The most functional model for end user connection
Supports DynDNS (Dynamic DNS); Supports UPNP (Universal Plug and Play); Supports NAT (Network Address Translation); Supports NTP (Network Time Protocol); Supports TR-069/TR-142; supports quality of service QoS; Supports IGMP-snooping; Supports IGMP-proxy;
Works in bridge or router mode; Supports PPPoE (PAP, SPAP and CHAP authorization); Supports static IP, and DHCP
(DHCP-client on WAN, LAN, DHCP - relay); Transmission of Multicast traffic via Wi-Fi; Supports DNS (Domain Name System);
Integrated WiFi AP, up to 300 Мbps, 802.11b/g/n, 2.4 GHz RF output (CATV) USB port with functional network disc; 2 FXS ports for phone sets connection; 1G router; 4 ports 10/100/1000 Base-T;
GEPON
Equipment
OLT LTE-2X, LTE-8X
Central office Turbo GEPON device (OLT) LTE-2X
2 ports Turbo GEPON (2.5 Gbps) 4 Combo-ports (10/100/1000Base-T/1000Base-X), up to 128 ONT supports RSSI function
8 ports Turbo GEPON, 4 Combo-ports (10/100/1000Base-T/1000Base-X), 4 ports 10/100/1000Base-T, 2 ports 10GE(SFP+). Up to 512 ONT
Central office Turbo GEPON device (OLT) LTE-8X
OLT LTE-2X
OLT LTE-8X
GUI Interface for management and monitoring
ONT NTE-2, NTE-2C End user terminals NTE-2, NTE-2С
1 port Turbo GEPON 1 port 100Base-T 1 port 10/100/1000Base-T RF-output (for CATV service) Distance 10, 20 km
The most functional model for end user connection
Integrated WiFi AP , standards 802.11b/g/n (up to 300 Мbps), 2.4 GHz and 5 GHz RF-ouput (CATV) USB port with a functional network disc; 2 ports FXS for connection of phone sets; 1 GB router; 4 ports 10/100/1000 Base-T;
NTE-RG End user terminals
NTE-2 rev.B
NTE-RG, NTE-RG Rev.C
NTE-2
Transceivers
Symbol Min Typ Max Unit memo
Transmitter
Average Launched Power PO 2 5 dBm GP-LP-LX-D
PO 1,5 dBm GP-LP-LX-I
Transmitter center wavelength λC 1480 1490 1500 nm
Optical Return Loss Tolerance ORLT 15 dB
Receiver
Receiver sensitivity PSEN dBm
Receiver optical wavelength λIN 1260 1310 1360 nm
Overload PSAT -8 dBm
Maximum distance 20 km
Bi-directional 1.25Gbps Upstream/2.5Gbps Downstream 1490nm continuous-mode, DFB transmitter 1310nm burst-mode, APD receiver
GPON & Turbo GEPON
EMS-ACS
The ACS, Automatic Configuration Server is designed for automatic and easy setup of CPE using the protocol described in the standard TR-069, which enables the operator to centrally manage customer equipment through the global network.
The EMS - Centralized Management Network System The unified access server provides a web interface that enables independent simultaneous management of various network elements using the protocol TR-069.
Managing user devices
Subscribers VoIP Gateways ONT PON
Тhin clients TC IPTV Set Top Boxes
Routers
ACS EMS
IPTV Set Top Boxes
CZECH MADE products Assembled and tested under ELTEX licence in the Czech Republic
NV-100
Integ10/100 Base-T LAN HDMI v1.3 AV RCA out 3,5mm 2 USB 2.0
high image quality speed multi functionality accommodation ease of management
Chipset Sigma Designs Peer-to-Peer TV App Store Support for popular Middleware Java Script and C++ (QT) SDK
Key benefits
IPTV Set Top Box
NV-310
high image quality speed multi functionality accommodation ease of management
Chipset Broadcom BCM7241 2D/3D accelerators, support for OpenGL OS Android 4.4 Peer-to-Peer TV App Store Support for popular Middleware Java Script API SDK
Key benefits
IPTV Set Top Box with OS Android Services
Interfaces: - HDMI 1.4 - 1 x LAN 10/100/100Base-T - 3 x USB 2.0 - SD Card Reader - Smart card slot - Internal Wi-Fi IEEE 802.11ac
Thank you for your attention